Annual Review of the European Football Players' Labour Market / Etude annuelle du marché du travail européen des footballeurs

The key reference on the labour market and the logics of squad formation in the big-5 European leagues. One hundred richly coloured pages, illustrated by graphics, maps, rankings, statistical models and analysis in French and English which inform managers about potential strategies to put their clubs on the road to success help managers of federations and players' unions to understand current trends and to take decisions ... suggest to journalists new lines of investigation likely to interest the general public allow researchers and students to benefit from reliable and comparable sources, developed with the greatest possible rigour ... give fans the possibility to understand in detail the dynamics at work in their favourite sport and club.

Dynamic estimation of three-dimensional cerebrovascular deformation from rotational angiography

Purpose: The objective of this study is to investigate the feasibility of detecting and quantifying 3D cerebrovascular wall motion from a single 3D rotational x-ray angiography (3DRA) acquisition within a clinically acceptable time and computing from the estimated motion field for the further biomechanical modeling of the cerebrovascular wall. Methods: The whole motion cycle of the cerebral vasculature is modeled using a 4D B-spline transformation, which is estimated from a 4D to 2D + t image registration framework. The registration is performed by optimizing a single similarity metric between the entire 2D + t measured projection sequence and the corresponding forward projections of the deformed volume at their exact time instants. The joint use of two acceleration strategies, together with their implementation on graphics processing units, is also proposed so as to reach computation times close to clinical requirements. For further characterizing vessel wall properties, an approximation of the wall thickness changes is obtained through a strain calculation. Results: Evaluation on in silico and in vitro pulsating phantom aneurysms demonstrated an accurate estimation of wall motion curves. In general, the error was below 10% of the maximum pulsation, even in the situation when substantial inhomogeneous intensity pattern was present. Experiments on in vivo data provided realistic aneurysm and vessel wall motion estimates, whereas in regions where motion was neither visible nor anatomically possible, no motion was detected. The use of the acceleration strategies enabled completing the estimation process for one entire cycle in 5-10 min without degrading the overall performance. The strain map extracted from our motion estimation provided a realistic deformation measure of the vessel wall. Conclusions: The authors' technique has demonstrated that it can provide accurate and robust 4D estimates of cerebrovascular wall motion within a clinically acceptable time, although it has to be applied to a larger patient population prior to possible wide application to routine endovascular procedures. In particular, for the first time, this feasibility study has shown that in vivo cerebrovascular motion can be obtained intraprocedurally from a 3DRA acquisition. Results have also shown the potential of performing strain analysis using this imaging modality, thus making possible for the future modeling of biomechanical properties of the vascular wall.

Safety Effectiveness of High-Speed Expressway Signals, 2005

The safety benefit of signalizing intersections of high-speed divided expressways is considered. Analyses were conducted on 50 and 55 mph and on 55 mph only intersections, comparing unsignalized and signalized intersections. Results of the 55 mph analysis are included in this report. Matched-pair analysis indicates that generally, signalized intersections have higher crash rate but lower costs per crash. On the other hand, before-and-after analysis (intersections signalized between 1994 and 2001) indicates lower crash rates (~30 percent) and total costs (~10 percent) after signalization. Empirical Bayes (EB) adjusted before-and-after analysis reduces estimates of safety benefit (crash rate) to about 20 percent. The study shows how commonly used analyses can differ in their results, and that there is great variability in the safety performance of individual signalized locations. This variability and the effect of EB adjustment are demonstrated through the use of innovative graphics.

TV taskussa - tänään ja tulevaisuudessa

The objective of my thesis was to find out how mobile TV service will influence TV consumption behaviour of the Finns. In particular the study focuses on the consumption behaviour of a well educated urban people. For my thesis, I provided a detailed analysis of the study results of a large scale questionnaire research FinPilot from the year 2005 based on an assignment of Nokia Ltd. In order to deepen the study results, I focused on the above mentioned group of young people with good education. The goal of the FinPilot research was to give answers to the following questions: what kind of programs, in what kind of circumstances, and for which reasons are they watched when using the mobile television service. The results of the research consisted mainly of data like figures, graphics etc. The data was explaned from the helicopter perspective, for it gave additional value to the research and consequently to my own thesis. My study offered complementary, unique information about their needs as it was based on questionnaires supplemented by individual interviews of the group members, their free comments as well as group discussions. The study results proved that mobile TV service did not increase the total TV consumption time. The time used for watching the mobile TV was significantly shorter than the time for watching the traditional TV. According to my study, the young urban people with good education are more interested to adapt the mobile TV service than the average Finns. Being eager to utilize the added value offered by the mobile TVs they are a potential target group in launching and marketing processes. On the basis of the outcome of the thesis, the future of mobile TV service seems very promising. The content and the pricing, however, have to match the user's needs and expectations. All the study results prove that there exists a social order for mobile TV service.

Desenvolupament d’una biblioteca per a la generació de diagrames vectorials basat en l’entorn gràfic de JAVA2D i aplicació d’aquesta biblioteca per a la implementació d’una eina per al desenvolupament de diagrames d’E/R

En aquest projecte es vol implementar una llibreria en Java, que proporcioni leseines necessàries per a crear diagrames i esquemes. Es vol proporcionar a la llibreria unconjunt d’objectes bàsics, també mètodes i funcionalitats suficients per a gestionaraquests objectes. Per altra part, es vol implementar una aplicació per a dissenyar diagrames Entitat-Relació que utilitzi aquesta llibreria

MyHits: improvements to an interactive resource for analyzing protein sequences.

The MyHits web site (http://myhits.isb-sib.ch) is an integrated service dedicated to the analysis of protein sequences. Since its first description in 2004, both the user interface and the back end of the server were improved. A number of tools (e.g. MAFFT, Jacop, Dotlet, Jalview, ESTScan) were added or updated to improve the usability of the service. The MySQL schema and its associated API were revamped and the database engine (HitKeeper) was separated from the web interface. This paper summarizes the current status of the server, with an emphasis on the new services.

Unfolding a symmetric matrix

Graphical displays which show inter--sample distances are importantfor the interpretation and presentation of multivariate data. Except whenthe displays are two--dimensional, however, they are often difficult tovisualize as a whole. A device, based on multidimensional unfolding, isdescribed for presenting some intrinsically high--dimensional displays infewer, usually two, dimensions. This goal is achieved by representing eachsample by a pair of points, say $R_i$ and $r_i$, so that a theoreticaldistance between the $i$-th and $j$-th samples is represented twice, onceby the distance between $R_i$ and $r_j$ and once by the distance between$R_j$ and $r_i$. Self--distances between $R_i$ and $r_i$ need not be zero.The mathematical conditions for unfolding to exhibit symmetry are established.Algorithms for finding approximate fits, not constrained to be symmetric,are discussed and some examples are given.

Dynamic perceptual mapping

Perceptual maps have been used for decades by market researchers to illuminatethem about the similarity between brands in terms of a set of attributes, to position consumersrelative to brands in terms of their preferences, or to study how demographic and psychometricvariables relate to consumer choice. Invariably these maps are two-dimensional and static. Aswe enter the era of electronic publishing, the possibilities for dynamic graphics are opening up.We demonstrate the usefulness of introducing motion into perceptual maps through fourexamples. The first example shows how a perceptual map can be viewed in three dimensions,and the second one moves between two analyses of the data that were collected according todifferent protocols. In a third example we move from the best view of the data at the individuallevel to one which focuses on between-group differences in aggregated data. A final exampleconsiders the case when several demographic variables or market segments are available foreach respondent, showing an animation with increasingly detailed demographic comparisons.These examples of dynamic maps use several data sets from marketing and social scienceresearch.

Implementing interactive computing in an object-oriented environment

Statistical computing when input/output is driven by a Graphical User Interface is considered. A proposal is made for automatic control ofcomputational flow to ensure that only strictly required computationsare actually carried on. The computational flow is modeled by a directed graph for implementation in any object-oriented programming language with symbolic manipulation capabilities. A complete implementation example is presented to compute and display frequency based piecewise linear density estimators such as histograms or frequency polygons.

iLOGP: A Simple, Robust, and Efficient Description of n-Octanol/Water Partition Coefficient for Drug Design Using the GB/SA Approach.

The n-octanol/water partition coefficient (log Po/w) is a key physicochemical parameter for drug discovery, design, and development. Here, we present a physics-based approach that shows a strong linear correlation between the computed solvation free energy in implicit solvents and the experimental log Po/w on a cleansed data set of more than 17,500 molecules. After internal validation by five-fold cross-validation and data randomization, the predictive power of the most interesting multiple linear model, based on two GB/SA parameters solely, was tested on two different external sets of molecules. On the Martel druglike test set, the predictive power of the best model (N = 706, r = 0.64, MAE = 1.18, and RMSE = 1.40) is similar to six well-established empirical methods. On the 17-drug test set, our model outperformed all compared empirical methodologies (N = 17, r = 0.94, MAE = 0.38, and RMSE = 0.52). The physical basis of our original GB/SA approach together with its predictive capacity, computational efficiency (1 to 2 s per molecule), and tridimensional molecular graphics capability lay the foundations for a promising predictor, the implicit log P method (iLOGP), to complement the portfolio of drug design tools developed and provided by the SIB Swiss Institute of Bioinformatics.

Comparing and validating hypothesis test procedures: Graphical and numerical tools

When the behaviour of a specific hypothesis test statistic is studied by aMonte Carlo experiment, the usual way to describe its quality is by givingthe empirical level of the test. As an alternative to this procedure, we usethe empirical distribution of the obtained \emph{p-}values and exploit itsinformation both graphically and numerically.

Programa d'anàlisi d'imatges de provetes metal·logràfiques

L’objectiu del present TFM és explorar les possibilitats del programa matemàtic MATLAB i la seva eina Entorn de Disseny d’Interfícies Gràfiques d’Usuari (GUIDE), desenvolupant un programa d’anàlisi d’imatges de provetes metal·logràfiques que es pugui utilitzar per a realitzar pràctiques de laboratori de l’assignatura Tecnologia de Materials de la titulació de Grau en Enginyeria Mecatrònica que s’imparteix a la Universitat de Vic. Les àrees d’interès del treball són la Instrumentació Virtual, la programació MATLAB i les tècniques d’anàlisi d’imatges metal·logràfiques. En la memòria es posa un èmfasi especial en el disseny de la interfície i dels procediments per a efectuar les mesures. El resultat final és un programa que satisfà tots els requeriments que s’havien imposat en la proposta inicial. La interfície del programa és clara i neta, destinant molt espai a la imatge que s’analitza. L’estructura i disposició dels menús i dels comandaments ajuda a que la utilització del programa sigui fàcil i intuïtiva. El programa s’ha estructurat de manera que sigui fàcilment ampliable amb altres rutines de mesura, o amb l’automatització de les rutines existents. Al tractar-se d’un programa que funciona com un instrument de mesura, es dedica un capítol sencer de la memòria a mostrar el procediment de càlcul dels errors que s’ocasionen durant la seva utilització, amb la finalitat de conèixer el seu ordre de magnitud, i de saber-los calcular de nou en cas que variïn les condicions d’utilització. Pel que fa referència a la programació, malgrat que MATLAB no sigui un entorn de programació clàssic, sí que incorpora eines que permeten fer aplicacions no massa complexes, i orientades bàsicament a gràfics o a imatges. L’eina GUIDE simplifica la realització de la interfície d’usuari, malgrat que presenta problemes per tractar dissenys una mica complexos. Per altra banda, el codi generat per GUIDE no és accessible, cosa que no permet modificar manualment la interfície en aquells casos en els que GUIDE té problemes. Malgrat aquests petits problemes, la potència de càlcul de MATLAB compensa sobradament aquestes deficiències.

La Multi-metodología Autobiográfica Extendida (MAE). Una estrategia cualitativa para estudiar la identidad, los fondos de conocimiento y las formas de vida

La multi-metodología autobiográfica es una aproximación cualitativa que combina distintas técnicas para estudiar la construcción narrativa de la identidad. El objetivo de este artículo es ofrecer una revisión de dicho enfoque a partir de una expansión de los distintos instrumentos cualitativos utilizados. Más concretamente, la multi-metodología autobiográfica extendida (MAE) consta de cuatro grupos de técnicas: entrevistas en profundidad (historia de vida, entrevista de fondos de conocimiento y la entrevista de Durand), el retrato o dibujo identitario revisado (dibujo identitario, auto-definición, tarea identitaria de las diez definiciones), el análisis de los artefactos-rutinas-formas de vida (diario de una semana, detección de artefactos, rutinas a través de fotografías, rutinas educativas a través de fotografías ) y la utilización de distintos “mapas psicológicos o psicogeográficos” (cronograma, genograma, ecomapa, geomapa y mapa relacional). Después de definir la identidad, los fondos de conocimiento y las formas de vida como posibles objetos de estudio en ciencias sociales, el artículo describe e ilustra las distintas técnicas que componen la metodología propuesta. Se concluye recomendando la triangulación de técnicas cualitativas narrativas basadas en el lenguaje, el caso de las tradicionales entrevistas en profundidad, con determinados procedimientos visuales, a partir de la utilización de fotografías o representaciones gráficas