Understanding and modelling hydrological and soil erosion processes in burnt forest catchments

Forest fires implications in overland flow and soil erosion have been researched for several years. Therefore, is widely known that fires enhance hydrological and geomorphological activity worldwide as also in Mediterranean areas. Soil burn severity has been widely used to describe the impacts of fire on soils, and has being recognized as a decisive factor controlling post-fire erosion rates. However, there is no unique definition of the term and the relationship between soil burn severity and post-fire hydrological and erosion response has not yet been fully established. Few studies have assessed post-fire erosion over multiple years, and the authors are aware of none which assess runoff. Small amount of studies concerning pre-fire management practices were also found. In the case of soil erosion models, the Revised Universal Soil Loss Equation (RUSLE) and the revised Morgan–Morgan–Finney (MMF) are well-known models, but not much information is available as regards their suitability in predicting post-fire soil erosion in forest soils. The lack of information is even more pronounced as regards post-fire rehabilitation treatments. The aim of the thesis was to perform an extensive research under the post fire hydrologic and erosive response subject. By understanding the effect of burn severity in ecosystems and its implications regarding post fire hydrological and erosive responses worldwide. Test the effect of different pre-fire land management practices (unplowed, downslope plowed and contour plowed) and time-since-fire, in the post fire hydrological and erosive response, between the two most common land uses in Portugal (pine and eucalypt). Assess the performance of two widely-known erosion models (RUSLE and Revised MMF), to predict soil erosion rates during first year following two wildfires of distinctive burn severity. Furthermore, to apply these two models considering different post-fire rehabilitation treatments in an area severely affected by fire. Improve model estimations of post-fire runoff and erosion rates in two different land uses (pine and eucalypt) using the revised MMF. To assess these improvements by comparing estimations and measurements of runoff and erosion, in two recently burned sites, as also with their post fire rehabilitation treatments. Model modifications involved: (1) focusing on intra-annual changes in parameters to incorporate seasonal differences in runoff and erosion; and (2) inclusion of soil water repellency in runoff predictions. Additionally, validate these improvements with the application of the model to other pine and eucalypt sites in Central Portugal. The review and meta-analysis showed that fire occurrence had a significant effect on the hydrological and erosive response. However, this effect was only significantly higher with increasing soil burn severity for inter-rill erosion, and not for runoff. This study furthermore highlighted the incoherencies between existing burn severity classifications, and proposed an unambiguous classification. In the case of the erosion plots with natural rainfall, land use factor affected annual runoff while land management affected both annual runoff and erosion amounts significantly. Time-since-fire had an important effect in erosion amounts among unplowed sites, while for eucalypt sites time affected both annual runoff and erosion amounts. At all studied sites runoff coefficients increase over the four years of monitoring. In the other hand, sediment concentration in the runoff, recorded a decrease during the same period. Reasons for divergence from the classic post-fire recovery model were also explored. Short fire recurrence intervals and forest management practices are viewed as the main reasons for the observed severe and continuing soil degradation. The revised MMF model presented reasonable accuracy in the predictions while the RUSLE clearly overestimated the observed erosion rates. After improvements: the revised model was able to predict first-year post-fire plot-scale runoff and erosion rates for both forest types, these predictions were improved both by the seasonal changes in the model parameters; and by considering the effect of soil water repellency on the runoff, individual seasonal predictions were considered accurate, and the inclusion of the soil water repellency in the model also improved the model at this base. The revised MMF model proved capable of providing a simple set of criteria for management decisions about runoff and erosion mitigation measures in burned areas. The erosion predictions at the validation sites attested both to the robustness of the model and of the calibration parameters, suggesting a potential wider application.

Regional and urban air quality modelling under a climate change scenario

The better understanding of the interactions between climate change and air quality is an emerging priority for research and policy. Climate change will bring changes in the climate system, which will affect the concentration and dispersion of air pollutants. The main objective of the current study is to assess the impacts of climate change on air quality in 2050 over Portugal and Porto urban area. First, an evaluation and characterization of the air quality over mainland Portugal was performed for the period between 2002 and 2012. The results show that NO2, PM10 and O3 are the critical pollutants in Portugal. Also, the influence of meteorology on O3, NO2 and PM10 levels was investigate in the national main urban areas (Porto and Lisboa) and was verified that O3 has a statistically significant relationship with temperature in most of the components. The results also indicate that emission control strategies are primary regulators for NO2 and PM10 levels. After, understanding the national air quality problems and the influence that meteorology had in the historical air quality levels, the air quality modelling system WRF-CAMx was tested and the required inputs for the simulations were prepared to fulfil the main goal of this work. For the required air quality modelling inputs, an Emission Projections under RCP scenarios (EmiPro-RCP) model was developed to assist the estimation of future emission inventories for GHG and common air pollutants. Also, the current emissions were estimated for Portugal with a higher detailed disaggregation to improve the performance of the air quality simulations. The air quality modelling system WRF/CAMx was tested and evaluated over Portugal and Porto urban area and the results point out that is an adequate tool for the analysis of air quality under climate change. For this purpose, regional simulations of air quality during historical period and future (2045-2050) were conducted with CAMx version 6.0 to evaluate the impacts of simulated future climate and anthropogenic emission projections on air quality over the study area. The climate and the emission projections were produced under the RCP8.5 scenario. The results from the simulations point out, that if the anthropogenic emissions keep the same in 2050, the concentrations of NO2, PM10 and O3 will increase in Portugal. When, besides the climate change effects, is consider the projected anthropogenic emissions the annual mean concentrations of NO2 decrease significantly in Portugal and Porto urban area, and on the contrary the annual mean PM10 concentrations increases in Portugal and decrease in Porto urban area. The O3 results are mainly caused by the reduction of ozone precursors, getting the higher reductions in urban areas and increases in the surrounding areas. All the analysis performed for both simulations for Porto urban area support that, for PM10 and O3, there will be an increase in the occurrence of extreme values, surpassing the annual legislated parameters and having more daily exceedances. This study constitutes an innovative scientific tool to help in future air quality management in order to mitigate future climate change impacts on air quality.

Síntese de receptores para o reconhecimento e transporte de aniões

Nesta tese, realizada no âmbito do Programa Doutoral em Química da Universidade de Aveiro, foram desenvolvidas duas famílias de receptores sintéticos: macrocíclicos baseados na plataforma tetraazacalix[2]areno[2]triazina; e acíclicos construídos a partir de diaminas simples. A plataforma macrocíclica foi decorada nos átomos de azoto em ponte com unidades de reconhecimento molecular contendo fragmentos com grupos amida para o reconhecimento de aniões ou com grupos ácidos carboxílicos para a coordenação de metais de transição. Os receptores acíclicos foram obtidos por acoplamento de diaminas (etilenodiamina, orto-fenilenodiamina ou 2-aminobenzilamina) com uma unidade lipofílica incorporando um anel heterocíclico (derivados de oxadiazole ou furano) e com um derivado isocianato. Estas moléculas assimétricas com um grupo amida e um grupo ureia como unidades de reconhecimento molecular foram avaliadas como receptores e transportadores transmembranares de aniões biologicamente relevantes (Cl- e HCO3-). Os resultados experimentais obtidos serão descritos ao longo de três capítulos, após um primeiro capítulo bibliográfico. No Capítulo 1 começa-se por fazer uma revisão bibliográfica sucinta sobre o desenvolvimento recente de receptores funcionais baseados em azacalixarenos bem como das suas aplicações, designadamente no reconhecimento molecular. Numa segunda parte apresenta-se uma revisão sucinta de receptores derivados de (tio)ureias, relacionados com os receptores sintetizados no âmbito desta tese e com propriedades de reconhecimento e transporte transmembranar de aniões. No Capítulo 2 reporta-se uma série de macrociclos novos com os átomos de azoto em ponte de tetraazacalix[2]areno[2]triazina funcionalizados com bromoacetato de metilo. Foram preparados três novos macrociclos com quatro grupos éster, como braços pendentes, a partir de percursores tetraazacalix[2]areno[2]triazina com os anéis de triazina substituídos com cloro, metilamina ou hexilamina. Os grupos acetato foram hidrolisados em condições básicas, tendo cada um dos derivados dialquilamina originado um composto com quatro grupo carboxílicos, enquanto o análogo diclorado originou uma mistura de compostos com dois grupos carboxílico e com os átomos de cloro substituídos por grupos hidroxilo. Subsequentemente, as propriedades de coordenação dos derivados alquilamina para cobre(II) foram avaliadas por espectroscopia de UV-Vis, tendo-se obtido constantes de estabilidades semelhantes (logk ≈ 6,7). No Capítulo 3 descrevem-se três macrociclos obtidos através da funcionalização dos átomos de azoto em ponte de tetraazacalix[2]areno[2]triazina com grupos amida derivados de N-Boc-etilenodiamina, benzilamina e (S)-metilbenzilamina. A afinidade destes receptores para a série de aniões carboxilato (oxalato, malonato, succinato, glutarato, diglicolato, pimelato, suberato, fumarato, maleato, ftalato e isoftalato) e inorgânicos (Cl-, H2PO4- e SO42-) por titulação de RMN de 1H, foi avaliada. Estes macrociclos conjuntamente com os descritos no Capítulo 2 são os primeiros exemplos reportados na literatura de receptores sintéticos baseados na plataforma de tetraazacalix[2]areno[2]triazina com grupos funcionais nos azotos em ponte. O receptor derivado de N-Boc-etilenodiamina, com oito grupos N-H, entre os três receptores, é o que apresenta maior afinidade para os aniões estudados. No Capítulo 4 é descrita a síntese 59 compostos acíclicos (vide supra) obtidos em três passos de síntese com bons rendimentos. No design desta biblioteca de moléculas a afinidade para aniões dos grupos ureia foi modelada pela inserção de diferentes substituintes arilo ou alquilo, com propriedades electrónicas distintas. A introdução destes grupos em conjugação com um anel de oxadiazole ou furano permitiu também modelar a lipofília destes compostos. A afinidade destes receptores para aniões cloreto e bicarbonato, e em alguns casos para fumarato e maleato, foi investigada por titulação de RMN de 1H. Estes compostos apresentaram constantes de associações compatíveis com o transporte transmembranar de cloreto. Por outro lado estes receptores apresentaram afinidades elevadas para fumarato e maleato, com seletividade para este último. São também discutidos os resultados dos ensaios de transporte de cloreto por estes receptores através de vesículas de em POPC. No Capítulo 5 encontram-se as conclusões gerais desta tese de Doutoramento. No Capitulo 6 encontram-se os dados espectroscópicos e os restantes detalhes experimentais para todos os compostos sintetizados.

Compreensão e interpretação em matemática: dificuldades de alunos do 9º ano na resolução de problemas

Dissertação mest., Matemática, Universidade do Algarve, 2009

Characterisation of physiological conditions and evaluation of well-being in two species of bivalve molluscs (Ruditapes philippinarum and Chamelea gallina) intensively exploited in coastal and lagoon areas of the Northern Adriatic Sea (Italy)

Tese de Doutoramento, Ecologia, Especialidade de Ecofisiologia, Faculdade de Ciências do Mar e do Ambiente, Universidade do Algarve, 2007

Educação permanente e troca de saberes entre gerações: o estudo de uma comunidade rural

Dissertação mest., Ciências da Educação, Universidade do Algarve, 2008

Dynamic Packaging e os Sistemas de Informação Turísticos: características, potencialidades e desafios

O aparecimento da Internet revolucionou as operações dentro do canal da distribuição turística, obrigando à reavaliação dos intervenientes a nível da forma de actuação e de posicionamento. A distribuição turística transformou-se num dos factores mais críticos para a competitividade dos destinos e das empresas turísticas, uma vez que tem como principal função o tratamento, a combinação e a organização da informação. A Internet permitiu e facilitou o acesso instantâneo à informação turística bem como a efectuar reservas e compras de produtos turísticos. Neste contexto tecnológico, emergiram na World Wide Web sites que permitem ao turista a criação de um pacote personalizado, que apresenta o preço em tempo real, designados por Dynamic Packaging. Neste artigo, apresentamos a sua ligação com os sistemas de informação turísticos, analisando as suas potencialidades e desafios inerentes ao desenvolvimento de uma arquitectura tecnológica, que integra a complexidade e especificidade da informação relacionada com a actividade turística, bem como está sujeita às constantes alterações sofridas pelo sector do turismo, numa sociedade onde todos os dias emergem novas funcionalidades e novos conceitos.

Development of a Piggybac based direct reprogramming system for derivation of integration free induced pluripotent stem cells

Induced pluripotent stem cells (iPSc) have great potential for applications in regenerative medicine, disease modeling and basic research. Several methods have been developed for their derivation. The original method of Takahashi and Yamanaka involved the use of retroviral vectors which result in insertional mutagenesis, presence in the genome of potential oncogenes and effects of residual transgene expression on differentiation bias of each particular iPSc line. Other methods have been developed, using different viral vectors (adenovirus and Sendai virus), transient plasmid transfection, mRNA transduction, protein transduction and use of small molecules. However, these methods suffer from low efficiencies; can be extremely labor intensive, or both. An additional method makes use of the piggybac transposon, which has the advantage of inserting its payload into the host genome and being perfectly excised upon re-expression of the transposon transposase. Briefly, a policistronic cassette expressing Oct4, Sox2, Klf4 and C-Myc flanked by piggybac terminal repeats is delivered to the cells along with a plasmid transiently expressing piggybac transposase. Once reprogramming occurs, the cells are re-transfected with transposase and subclones free of tranposon integrations screened for. The procedure is therefore very labor intensive, requiring multiple manipulations and successive rounds of cloning and screening. The original method for reprogramming with the the PiggyBac transposon was created by Woltjen et al in 2009 (schematized here) and describes a process with which it is possible to obtain insert-free iPSc. Insert-free iPSc enables the establishment of better cellular models of iPS and adds a new level of security to the use of these cells in regenerative medicine. Due to the fact that it was based on several low efficiency steps, the overall efficiency of the method is very low (<1%). Moreover, the stochastic transfection, integration, excision and the inexistence of an active way of selection leaves this method in need of extensive characterization and screening of the final clones. In this work we aime to develop a non-integrative iPSc derivation system in which integration and excision of the transgenes can be controlled by simple media manipulations, avoiding labor intensive and potentially mutagenic procedures. To reach our goal we developed a two vector system which is simultaneously delivered to original population of fibroblasts. The first vector, Remo I, carries the reprogramming cassette and GFP under the regulation of a constitutive promoter (CAG). The second vector, Eneas, carries the piggybac transposase associated with an estrogen receptor fragment (ERT2), regulated in a TET-OFF fashion, and its equivalent reverse trans-activator associated with a positive-negative selection cassette under a constitutive promoter. We tested its functionality in HEK 293T cells. The protocol is divided in two the following steps: 1) Obtaining acceptable transfection efficiency into human fibroblasts. 2) Testing the functionality of the construct 3) Determining the ideal concentration of DOX for repressing mPB-ERT2 expression 4) Determining the ideal concentration of TM for transposition into the genome 5) Determining the ideal Windows of no DOX/TM pulse for transposition into the genome 6) 3, 4 and 5) for transposition out of the genome 7) Determination of the ideal concentration of GCV for negative selection We successfully demonstrated that ENEAS behaved as expected in terms of DOX regulation of the expression of mPB-ERT2. We also demonstrated that by delivering the plasmid into 293T HEK cells and manipulating the levels of DOX and TM in the medium, we could obtain puromycin resistant lines. The number of puromycin resistant colonies obtained was significantly higher when DOX as absent, suggesting that the colonies resulted from transposition events. Presence of TM added an extra layer of regulation, albeit weaker. Our PCR analysis, while not a clean as would be desired, suggested that transposition was indeed occurring, although a background level of random integration could not be ruled out. Finally, our attempt to determine whether we could use GVC to select clones that had successfully mobilized PB out of the genome was unsuccessful. Unexpectedly, 293T HEK cells that had been transfected with ENEAS and selected for puromycin resistance were insensitive to GCV.

Electrical characterization of metal-oxide-polymer devices for non-volatile memory applications

The objective of this thesis is to study the properties of resistive switching effect based on bistable resistive memory which is fabricated in the form of Al2O3/polymer diodes and to contribute to the elucidation of resistive switching mechanisms. Resistive memories were characterized using a variety of electrical techniques, including current-voltage measurements, small-signal impedance, and electrical noise based techniques. All the measurements were carried out over a large temperature range. Fast voltage ramps were used to elucidate the dynamic response of the memory to rapid varying electric fields. The temperature dependence of the current provided insight into the role of trapped charges in resistive switching. The analysis of fast current fluctuations using electric noise techniques contributed to the elucidation of the kinetics involved in filament formation/rupture, the filament size and correspondent current capabilities. The results reported in this thesis provide insight into a number of issues namely: (i) The fundamental limitations on the speed of operation of a bi-layer resistive memory are the time and voltage dependences of the switch-on mechanism. (ii) The results explain the wide spread in switching times reported in the literature and the apparently anomalous behaviour of the high conductance state namely the disappearance of the negative differential resistance region at high voltage scan rates which is commonly attributed to a “dead time” phenomenon which had remained elusive since it was first reported in the ‘60s. (iii) Assuming that the current is filamentary, Comsol simulations were performed and used to explain the observed dynamic properties of the current-voltage characteristics. Furthermore, the simulations suggest that filaments can interact with each other. (iv) The current-voltage characteristics have been studied as a function of temperature. The findings indicate that creation and annihilation of filaments is controlled by filling and neutralizing traps localized at the oxide/polymer interface. (v) Resistive switching was also studied in small-molecule OLEDs. It was shown that the degradation that leads to a loss of light output during operation is caused by the presence of a resistive switching layer. A diagnostic tool that predicts premature failure of OLEDs was devised and proposed. Resistive switching is a property of oxides. These layers can grow in a number of devices including, organic light emitting diodes (OLEDs), spin-valve transistors and photovoltaic devices fabricated in different types of material. Under strong electric fields the oxides can undergo dielectric breakdown and become resistive switching layers. Resistive switching strongly modifies the charge injection causing a number of deleterious effects and eventually device failure. In this respect the findings in this thesis are relevant to understand reliability issues in devices across a very broad field.

Leis da Política Nacional de Turismo do Brasil: uma perspectiva comparativa de sustentabilidade do outro lado do Atlântico

A regulação é apresentada como instrumento de uma política pública, neste caso, de uma política pública de turismo (GONZÁLEZ, 2004; OLIVEIRA, 2009; MACHADO, 2010). A sujeição desta a um princípio geral como a sustentabilidade, conforme art. 4º parágrafo único da Lei da Política Nacional de Turismo do Brasil (LPNTB) dá o mote para a investigação. É objetivo do artigo fazer uma análise comparativa entre as regulações constantes das leis-quadro das políticas públicas de turismo no Brasil e em Portugal, à luz de princípios funcionais comuns e sistémicos e, em particular, do princípio da sustentabilidade. A regulação do princípio da sustentabilidade no turismo, actividade, também, marcada por fortes princípios de sustentabilidade (OMT, 1999; RYAN, 2002; VALLS, 2004) implica que o Direito se adeque, enquanto instrumento, método, processo, dir-se-ia, como sistema (BENI, 2004; OLIVEIRA, 2004) adequado às especificidades do turismo, cujas políticas públicas estão funcionalizadas para fortes exigências de desenvolvimento económico e social. Para melhor compreensão, enriquecimento e conhecimento da regulação, enquanto instrumento de sustentabilidade, o autor recorre ao método comparado, justapondo os desenvolvimentos do princípio da sustentabilidade constantes da LPNTB com o princípio da sustentabilidade constante da Lei das Políticas Públicas de Turismo em Portugal (LPPTP). Assim, permite-se um apuramento e refinamento do sentido do princípio da sustentabilidade, através da deteção de pontes, homologias, funcionalidades idênticas e diferenças entre o sistema jurídico brasileiro e o português quanto à regulação fundamental de políticas públicas de turismo, permitindo-se uma melhor compreensão da sua funcionalidade, que se pretende o mais universal possível (OMT, 1999).

Characterization of TRIB2 following PI3K inhibition

Dissertação de mestrado, Oncobiologia,(Mecanismos Moleculares do Cancro), Departamento de Ciências Biomédicas e Medicina, Universidade do Algarve, 2015

Projeto de intervenção num centro de formação

Trabalho de projeto de mestrado, Ciências da Educação (Formação de Adultos), Universidade de Lisboa, Instituto de Educação, 2013

A Problemática da estratégia no sector das energias renováveis em Portugal

Dissertação apresentada ao Instituto Superior de Contabilidade e Administração do Porto para obtenção do Grau de Mestre em Gestão das Organizações, Ramo de Gestão de Empresas Orientada pelo Professor Doutor Eduardo Manuel Lopes de Sá e Silva

Custo histórico versus justo valor

Oriêntador: Mestre Carlos Pedro

Manual de procedimentos: gestão do imobilizado

Trabalho de Projecto para a obtenção do Grau de Mestre em Contabilidade e Finanças Orientador: Mestre Armindo Licínio da Silva Macedo