Composto orgânico no potencial fisiológico de sementes de brócolis após o armazenamento

The study was carried out with the objective to evaluate the broccoli seeds (cultivar Ramoso Santana) germination and vigor from plants cultivated with different organic compost levels and after storage in dry chamber. At seed production stage, the experiment was conducted in randomized complete blocks design, with five treatments (0; 30; 60; 90 and 120 t ha(-1) of Biomix (R) organic compost) and four replications. Soon after harvesting and after 12 and 24 months of conservation in dry chamber room (20 degrees C and 40% relative humidity) it was evaluated germination, following seed analisys rules, and vigor (first count of germination and germination speed index - IVG). There were no differences in germination and vigor in seeds as soon as they were harvested and after 12 month of storage. After 24 months of storage, the lesser the organic compost rates, the lesser seed germination and IVG, with respective values, without compost, of 69% and 12,3. For another hand, the highest values for germination and IVG, 82% and 16,1, respectively, were obtained with the highest rate of organic compost (120 t ha(-1)).

Qualidade fisiológica e armazenamento de sementes de milheto em função da época de semeadura

Pearl millet is recommended to produce dry matter for no-tillage system, as forage or for grain yield. The sowing time affects the crop development; thus, it can affect seed quality and initial storage conditions. The present research had as objective to evaluate the effects of sowing time on pearl millet seeds quality during the storage. Pearl millet seeds from twelve monthly sowing times were stored in environmental conditions, with no temperature and relative humidity control, and evaluated by seed moisture content, germination and vigor (first count of the germination test and electrical conductivity) for 0, 27 and 42 months of storage. The completely random design was employed, as a factorial experiment 12 x 3 (sowing time x storage time), with four replications. Means were compared by Tukey test (p <= 0.05). Pearl millet seeds produced in September resulted in the production of seeds with high germination and vigor, evaluated by the electrical conductivity test. The capacity of quality conservation of pearl millet seeds, for different storage times, is related to crop sowing time.

Qualidade fisiológica de sementes de palmiteiro-vermelho em função da desidratação e do armazenamento

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Armazenamento a frio de ramos porta-borbulhas e métodos de enxertia de cultivares de marmeleiro

Visando a aumentar o aproveitamento do material propagativo, ampliar o período de oferta das mudas de marmeleiro e dinamizar o uso da mão-de-obra no viveiro, faz-se necessário o armazenamento dos ramos porta-borbulhas. Sendo assim, o presente trabalho teve por objetivos estudar a viabilidade da manutenção dos ramos porta-borbulhas de diferentes cultivares de marmeleiro, por meio do armazenamento a frio, e diagnosticar o método de enxertia para promover melhor desenvolvimento do enxerto. Ramos dos marmeleiros 'Japonês' (Chaenomeles sinensis), 'Smyrna', 'Portugal', 'Mendoza Inta-37' e 'Provence' (Cydonia oblonga) foram coletados em julho de 2008. Uma parte dos ramos foi utilizada para a realização da enxertia (métodos de borbulhia e garfagem) em mudas de seis meses de idade do porta-enxerto 'Japonês', e a outra parte foi armazenada sob baixa temperatura (estacas envoltas em papel umedecido, embrulhadas em sacos de polietileno colocadas em câmara fria a 4°C), por 30 e 60 dias. Passados 60 dias, foi mensurada a porcentagem de brotação dos enxertos e, ao final de 120 dias da realização das enxertias, foram mensurados o comprimento, o diâmetro e a massa seca média dos enxertos. Concluiu-se que, apesar de as cultivares apresentarem diferença, recomenda-se que os ramos sejam armazenados por até 30 dias, sendo utilizada a enxertia pelo método de garfagem.

Posição do racemo e do fruto na qualidade fisiológica de sementes de mamona durante o armazenamento

The present research had as objective to evaluate the influence of raceme and fruit position on physiological quality of castor bean seeds (Ricinus communis L.) during storage of cultivar AL Guarany 2002. The treatments were: position of the raceme in plants (primary, secondary and tertiary) and position of fruit in racemes (low, medium and high). After fruit extraction, seeds were stored under environmental conditions for twelve months. The experimental design used was the completely randomized in a split-plot arrangement. Main plots consisted of the interaction raceme x fruit position and subplots were the storage time. Physiological quality was evaluated quarterly through tests of moisture content, germination and vigor (first count, accelerated aging, seedling length and seedling dry matter). Neither the position of racemes in the plant nor fruit in racemes does not affect germination of castor bean seeds. Dormancy of castor bean seeds decreases during storage, but also increases percentage of abnormal seedlings, seedling dry matter and root, hypocotyl and seedling total length.

Estudo da desidratação de tomates em pedaços com pré-tratamento osmótico

Vegetables drying plays an important role in the field of food dehydration, being a very old practice that was originated from sun drying items of food in order to preserve them to be consumed during the periods of scarcity. One of these vegetables is the tomato, that was originally grown in South America. Tomatoes are easily perishable after being picked up from the tree and this makes the process of tomato dehydration a challenge due to the high amount of water (95%) contained in them. The present research work was mainly intended to develop alternative processes for tomato conservation, by drying slices of skinned and unskinned tomatoes in the in natura form or in the osmotically pre-dehydrated form. Firstly, the best conditions of the osmotic pre-dehydration process were defined including temperature, immersion time and concentration of the osmotic solution, based on the results of water loss, solids gain and weigh reduction of the pre-dehydration tomatoes at different processing conditions. The osmotic solution used was made up of NaCl (5 and 10%) and sucrose (25 and 35%) at different combinations. For a fixed conditions of osmotic pre-dehydration, the drying tests of the pre-processed and in natura tomatoes were carried out in a stove with air circulation and a convective dryer with trays, at two levels of temperature. The sensorial analysis of the osmotically pre-treated and unskinned dehydrated tomatoes was carried out as well as a study on the their shelf-live. The results obtained showed that the drying of the tomatoes took place as a result of the internal control of the water transport, and did not show a constant rate, while two distinct periods of the decreasing phase were observed. The osmotic pre treatment substancially reduced the initial amount of humidity in the tomatoes, thus reducing the necessary time for the product to attain levels of intermediate humidity. The impermeability of the tomato skin was identified as well as the unfavorable influence of the pre-treatment on the unskinned tomatoes, whose solid gain brought about a decrease in the water activity with subsequent reduction of the drying rate. Despite the various simplifications carried out during the development of this study, the proposed diffusive model adjusted to the experimental data satisfactorily, thus making it possible to determine the effective coefficients of diffusion, whose results were consistent and compatible with those found in the current literature. Concerning the higher rates of evaporation and the lowest processing time, the best results were obtained in the drying of the unskinned, in natura tomatoes and of the skinned, pre-dehydrated tomatoes, at 60ºC, both processed in the convective drier. The results of the sensorial analysis of the unskinned and pre-treated product did not prove to be satisfactory. Regarding the shelf-live of the tomatoes, for a period of 45 days, no physicochemical or microbiological alteration of the product was noted

Efeitos do ambiente de armazenamento na qualidade de sementes de sorgo-sudão

O trabalho objetivou avaliar efeitos do ambiente de armazenamento na qualidade de sementes de sorgo-sudão (Sorghum sudanense (Piper) Stapf) de diferentes procedências. Cinco lotes de diferentes origens foram armazenados por nove meses, acondicionados em sacos de papel unifoliado, em quatro condições ambientais: ambiente natural de laboratório (sem controle de umidade relativa e temperatura); 30 a 40% de umidade relativa e sem controle de temperatura (simulada através de câmara seca); 10 a 15% de umidade relativa e 5 a 7ºC de temperatura (simulada através de um refrigerador Frost Free); 40 a 50% de umidade relativa e -20ºC de temperatura (simulada através de freezer). As avaliações laboratoriais, realizadas em intervalos trimestrais, foram: teor de água, massa de mil sementes, germinação, crescimento de plântulas, massa seca de plântulas, envelhecimento acelerado, condutividade elétrica, emergência em campo e índice de velocidade de emergência. O delineamento utilizado foi o inteiramente casualizado, com quatro repetições, num esquema fatorial 4 x 5, e comparação de médias pelo teste de Tukey a 5% de probabilidade. A origem das sementes, relacionada à qualidade das mesmas, mostrou-se como o principal fator a influenciar a conservação. Os ambientes refrigerador e freezer, seguidos da câmara seca, mostraram-se adequadas à conservação de sementes de sorgo-sudão. A capacidade de conservação de sementes dessa espécie relaciona-se com a sua qualidade inicial dependente da sua origem.

Secagem do resíduo de acerola (Malphigia emarginata D.C.): estudo do processo e avaliação do impacto sobre o produto final

Brazil, one of the largest agricultural producers in the world, has managed in recent years to significantly improve its production. However, in response to this advance in the agro-industrial sector, the generation of agro-industrial residues has also increased. New technological alternatives have to be implemented in order to bring economic and rational use of this material and drying is one of the possible choices. Considering the great importance that bioactive compounds present for food science and technology, this research aims to evaluate the air-drying process of acerola residue in a tray convective drier under controlled temperature (60, 70 e 80ºC), air velocity (4.0, 5.0 e 6.0 m/s) and material width (0.5, 0.62 e 0.75 cm) by applying an experimental planning 23 + 3. Based on that, the impact on physical-chemical characteristics, color, bioactive compounds concentration and antioxidant activity of dried acerola waste was evaluated, having the in natura and freeze dried waste as control groups. Dried acerola residue presented natural pigments, mainly carotenoids (143.68 - 68.29 mg/g) and anthocyanins (290.92 - 90.11 mg/100 g), which explain the red and yellow instrumental color parameters observed. The acerola residue powder is also rich in phenolic compounds (3261.11 -2692.60 mgGAEeq/100g), proanthocyanidins (61.33-58.46 eq/100g), ascorbic acid (389.44 739.29 mg/100 g) and DPPH antioxidant activity (20.91 24.72 μg Trolox eq/g). Results show decreased concentration of phenolic compounds, anthocyanins, carotenoids, proanthocyanidins and ascorbic acid caused by the air-drying process. However, even after the observed drying losses, the acerola residue powder can be considered a high value food ingredient, considering the high bioactive compounds concentration found in the final product, as well as the colorimetric characterization and microbiological stability of the dried powder

Suco desidratado de caju (Anacardium occidentale L.) por atomização: caracterização físico-química, bioativa e estudo da vida de prateleira do produto

Despite the relatively organized cashew (Anacardium occidentale L.) productive chain and the number of cashew derivatives found in the market, it is estimated that over 90% of the cashew peduncle is wasted. A possible strategy for a better commercial exploitation of this agroindustrial commodity would be the production of spray dried cashew pulp. Thus, this paper approaches the yellow cashew pulp spray drying process and the final product evaluation. Based on that, the shelf life of the spray dried cashew pulp packed in different packaging was evaluated. Drying was conducted in two drying temperatures (140 °C to 150 °C) and two concentrations of Arabic gum (AG, 15% and 25%), which summed four experimental groups. The drying performance was evaluated as well as the physicochemical characteristics (moisture, water activity, total soluble solids, pH, density, solubility, particle diameter, hygroscopicity, degree of caking, color, scanning electronic microscopy and X-ray diffraction), composition (protein, ash, fat and sugars) and bioactive and functional value (total phenolic compounds, carotenoids, ascorbic acid and antioxidant activity) of the final products. Results showed spray drying efficiency higher than 65% for all experiments, mainly for the C4 group (150 °C and 25% AG) which reached efficiency of 93.4%. It was also observed high solubility (94.7% to 97.9%) and the groups with lower hygroscopicity (5.8% and 6.5%) were those with the highest proportion of drying coadjuvant. The particle diameters ranged between 14.7 μm and 30.2 μm and increased with the proportion of AG. When comparing the product before and after spray drying, the drying impact was evident. However, despite the observed losses, dried yellow cashew showed high phenolic concentration (from 235.9 to 380.4 mg GAE eq / 100 g DM), carotenoids between 0.22 and 0.49 mg/100 g DM and remarkable ascorbic acid levels (852.4 to 1346.2 mg/100 g DM), in addition to antioxidant activity ranging from 12.9 to 16.4 μmol TE/ g DM. The shelf life study revealed decreased phenolic content over time associated to a slight water activity increase. Overall, our results unveil the technological and bioactive potential of dried yellow cashew as a functional ingredient to be used in food formulations or as a ready-to-use product. The technological approach presented here can serve as an efficient strategy for a rational use of the cashew apple, avoiding its current underutilization

Balanço energético de um forno túnel de cerâmica estrutural convertido de lenha para gás natural

In energy systems, the balance of entrances, exits and losses are fundamental to rationalize the energy consumption, independently of the source (sun, natural gas, wind, water, firewood or oil). This estimate is important so much in the phase of project of the facilities, as in the exploration or operation. In the project phase it indicates the energy needs of the process and the contribution of the energy in the cost of the product and the capacity of storage of the fuel and in the operation phase it allows to evaluate the use of the energy in the process of it burns, showing the weak points that should suffer intervention to improve the efficiency. With this tool, it can be implemented routines of calculation of thermal balances in ovens of it burns of structural ceramic, in way to generate an optimized mathematical model for application in the current and promising structural ceramic brazilian industry. The ceramic oven in study is located in the metropolitan area of Natal (Rio Grande do Norte) and it is a continuous oven of the type wagons tunnel, converted of firewood for natural gas and it produces blocks of red ceramic. The energy balance was applied in the oven tunnel before and after the conversion and made the comparisons of the energy efficiencies (it burns to the firewood and it burns to natural gas), what showed that the gaseous fuel is more efficient when we burn structural ceramic in ovens tunnels. When we burn natural gas, the requested energy is smaller and better used. Tests were accomplished in the burned product that showed the best quality of the burned brick with natural gas. That quality improvement makes possible to accomplish new interventions for the most rational use of the energy in the oven tunnel of the Ceramic in study and in the industries of structural ceramic of the whole Brazil, that need control tools of burning and of quality

Extração supercrítica do óleo de linhaça: construção do extrator, estudo de parâmetros de processo, avaliação química e antioxidante do produto

The aim of the present study was to extract vegetable oil from brown linseed (Linum usitatissimum L.), determine fatty acid levels, the antioxidant capacity of the extracted oil and perform a rapid economic assessment of the SFE process in the manufacture of oil. The experiments were conducted in a test bench extractor capable of operating with carbon dioxide and co-solvents, obeying 23 factorial planning with central point in triplicate, and having process yield as response variable and pressure, temperature and percentage of cosolvent as independent variables. The yield (mass of extracted oil/mass of raw material used) ranged from 2.2% to 28.8%, with the best results obtained at 250 bar and 50ºC, using 5% (v/v) ethanol co-solvent. The influence of the variables on extraction kinetics and on the composition of the linseed oil obtained was investigated. The extraction kinetic curves obtained were based on different mathematical models available in the literature. The Martínez et al. (2003) model and the Simple Single Plate (SSP) model discussed by Gaspar et al. (2003) represented the experimental data with the lowest mean square errors (MSE). A manufacturing cost of US$17.85/kgoil was estimated for the production of linseed oil using TECANALYSIS software and the Rosa and Meireles method (2005). To establish comparisons with SFE, conventional extraction tests were conducted with a Soxhlet device using petroleum ether. These tests obtained mean yields of 35.2% for an extraction time of 5h. All the oil samples were sterilized and characterized in terms of their composition in fatty acids (FA) using gas chromatography. The main fatty acids detected were: palmitic (C16:0), stearic (C18:0), oleic (C18:1), linoleic (C18:2n-6) and α-linolenic (C18:3n-3). The FA contents obtained with Soxhlet dif ered from those obtained with SFE, with higher percentages of saturated and monounsaturated FA with the Soxhlet technique using petroleum ether. With respect to α-linolenic content (main component of linseed oil) in the samples, SFE performed better than Soxhlet extraction, obtaining percentages between 51.18% and 52.71%, whereas with Soxhlet extraction it was 47.84%. The antioxidant activity of the oil was assessed in the β-carotene/linoleic acid system. The percentages of inhibition of the oxidative process reached 22.11% for the SFE oil, but only 6.09% for commercial oil (cold pressing), suggesting that the SFE technique better preserves the phenolic compounds present in the seed, which are likely responsible for the antioxidant nature of the oil. In vitro tests with the sample displaying the best antioxidant response were conducted in rat liver homogenate to investigate the inhibition of spontaneous lipid peroxidation or autooxidation of biological tissue. Linseed oil proved to be more efficient than fish oil (used as standard) in decreasing lipid peroxidation in the liver tissue of Wistar rats, yielding similar results to those obtained with the use of BHT (synthetic antioxidant). Inhibitory capacity may be explained by the presence of phenolic compounds with antioxidant activity in the linseed oil. The results obtained indicate the need for more detailed studies, given the importance of linseed oil as one of the greatest sources of ω3 among vegetable oils

Influencia de la deshidratación osmótica y de la adición de cloruro de calcio en la conservación de kivis minimamente procesados

Este trabalho teve como objetivo estudar o efeito combinado da desidratação osmótica e a influência do cloreto de cálcio em rodelas de kiwi submetidas ao processamento mínimo. Amostras com e sem desidratação osmótica foram armazenadas a 5 °C em embalagem PET. A adição do cloreto de cálcio foi realizada durante a desidratação osmótica. Foram avaliados a perda de peso, acidez, sólidos solúveis, pH, umidade, coliformes, fungos e leveduras nas amostras até 15 dias de armazenamento. A avaliação microbiológica e sensorial definiu a vida de prateleira do produto. Os resultados mostraram que o pré-tratamento osmótico com adição de cloreto de cálcio aumentou a vida útil em até 15 dias, enquanto as rodelas tratadas por osmodesidratação, sem a adição do sal apresentaram vida útil de 12 dias. Sensorialmente, os consumidores preferiram as rodelas de kiwi processadas com pré-tratamento osmótico e adição de cloreto de cálcio.

Influencia de la deshidratación osmótica y de la adición de cloruro de calcio en la conservación de kivis minimamente procesados

Este trabajo tubo como objetivo estudiar el efecto combinado de la deshidratación osmótica y la influencia del cloruro de calcio en rodajas de kivi sometidos al proceso mínimo. Muestras con y sin deshidratación osmótica fueron almacenadas a 5 °C en embalajes PET. La adición de cloruro de calcio fue realizada durante la deshidratación osmótica. Se evaluaron la pérdida de peso, acidez, sólidos solubles, pH, humedad, coliformes, hongos y levaduras en las muestras hasta 15 días de almacenamiento. La deshidratación osmótica consistió en la inmersión de las rodajas de kivi en solución de sacarosa a 60% y en solución de sacarosa (60%) con adición de cloruro de calcio (0,1 M), ambos tratamientos se realizaron a temperatura ambiente (25 °C) por 24 horas y relación fruta:solución de 1:5. Los resultados mostraron que el pré-tratamiento osmótico con adición de cloruro de calcio aumentó la vida útil hasta 15 días, en cuanto las rodajas tratadas por osmodeshidratación sin adición de sal presentaron vida útil de 12 días. Sensorialmente, los consumidores prefirieron las rodajas de kivi procesadas con pré-tratamiento osmótico y adición de cloruro de calcio.

Uso de produto à base de enzima e levedura na dieta de bovinos: digestibilidade dos nutrientes e desempenho em confinamento

Objetivou-se, com este trabalho, avaliar os efeitos da adição de diferentes níveis de enzima mais levedura na dieta de bovinos sobre a digestibilidade aparente dos nutrientes e o desempenho em confinamento, utilizando-se 18 animais machos, mestiços, de origem leiteira, com peso vivo (PV) médio de 190±10 kg e 12 meses de idade, e 27 animais da raça Guzerá com PV médio de 325 kg e idade média de 27 meses. Os níveis de enzima mais levedura foram zero (controle), 5 g de enzima (E) mais 5 g de levedura (L) e 10 g de E mais 5 g de L por animal por dia. Todos os animais receberam a mesma dieta, constituída de 65% de silagem (50% de milho:50% de sorgo) e 35% de concentrado composto de milho (24,6%), farelo de algodão (7,4%), uréia (1,2%), sal mineralizado (0,54%) e calcário (0,86%). Esta dieta apresentava 12,4% de PB; 10,1 MJEM/kg MS e 41,1% de FDN. A adição de enzima mais levedura não alterou o consumo de MS (3,31% do PV ou 126,6 g/kg PV0,75), e CDA da MS (63,0%), PB (68,2%), EE (83,3%), CHOT (61,3%), FDN (47,2%), FDA (43,8%) e valor de NDT (62,8%). O GMD e o CMS diminuíram de forma quadrática e a CA alimentar piorou linearmente, em função dos dias de confinamento. O fornecimento de enzima mais levedura para bovinos de corte não traz benefícios nutricionais ou de desempenho.

Análise de impacto baseada em rastreabilidade de artefatos para linhas de produto de software

Software Product Line (SPL) consists of a software development paradigm, whose main focus is to identify features common and variability among applications in a specific domain. An LPS is designed to attend all products requirements from its product family. These requirements and LPS may have changes over time due to several factors, such as evolution of product requirements, evolution of the market, evolution of SLP process, evolution of the technologies used to develop the products. To handle these changes, LPS should be modified and evolve in order to not become obsolete, and adapt itself to new requirements. The Changes Impact Analysis is an activity that understand and identify what consequences these changes are cause on LPS. Impact Analysis on LPS may be supported by traceability relationships, which identify relationships between artefacts created during all phases of software development. Despite the solutions of change impact analysis based on traceability for software, there is a lack of solutions for assessing the change impact analysis based on traceability for LPS, since existing solutions do not include estimates specific to the artefacts of LPS. Thus, this paper proposes a process of change impact analysis and an tool for assessing the change impact through traceability of artefacts in LPS. For this purpose, we specified a process of change impact analysis that considers artifacts produced during the development of LPS. We have also implemented a tool which allows estimating and identifying artefacts and products of LPS affected from changes in other products, changes in class, changes in features, changes between releases of LPS and artefacts related to changes in core assets and variability. Finally, the results were evaluated through metrics