Analysis of Transmission System Adequacy Considering the Constrained Fuzzy Power Flow

Power flow calculations are one of the most important tools for power system planning and operation. The need to account for uncertainties when performing power flow studies led, among others methods, to the development of the fuzzy power flow (FPF). This kind of models is especially interesting when a scarcity of information exists, which is a common situation in liberalized power systems (where generation and commercialization of electricity are market activities). In this framework, the symmetric/constrained fuzzy power flow (SFPF/CFPF) was proposed in order to avoid some of the problems of the original FPF model. The SFPF/CFPF models are suitable to quantify the adequacy of transmission network to satisfy “reasonable demands for the transmission of electricity” as defined, for instance, in the European Directive 2009/72/EC. In this work it is illustrated how the SFPF/CFPF may be used to evaluate the impact on the adequacy of a transmission system originated by specific investments on new network elements

Constrained fuzzy power flow models with correlation between nodal injections

This paper extends the symmetric/constrained fuzzy powerflow models by including the potential correlations between nodal injections. Therefore, the extension of the model allows the specification of fuzzy generation and load values and of potential correlations between nodal injections. The enhanced version of the symmetric/constrained fuzzy powerflow model is applied to the 30-bus IEEE test system. The results prove the importance of the inclusion of data correlations in the analysis of transmission system adequacy.

Probabilistic Security Constrained Fuzzy Power Flow Models

In restructured power systems, generation and commercialization activities became market activities, while transmission and distribution activities continue as regulated monopolies. As a result, the adequacy of transmission network should be evaluated independent of generation system. After introducing the constrained fuzzy power flow (CFPF) as a suitable tool to quantify the adequacy of transmission network to satisfy 'reasonable demands for the transmission of electricity' (as stated, for instance, at European Directive 2009/72/EC), the aim is now showing how this approach can be used in conjunction with probabilistic criteria in security analysis. In classical security analysis models of power systems are considered the composite system (generation plus transmission). The state of system components is usually modeled with probabilities and loads (and generation) are modeled by crisp numbers, probability distributions or fuzzy numbers. In the case of CFPF the component’s failure of the transmission network have been investigated. In this framework, probabilistic methods are used for failures modeling of the transmission system components and possibility models are used to deal with 'reasonable demands'. The enhanced version of the CFPF model is applied to an illustrative case.

Analytic Network Process (ANP) a supporto della scelta della strategia produttiva: sviluppo e test di un approccio decisionale

Di fronte alla concorrenza globale, la sopravvivenza di un'azienda manifatturiera dipende sempre più da come essa può progettare, gestire e strutturare al meglio il proprio sistema di produzione per far fronte alla diversità dei prodotti, per migliorare l'affidabilità di consegna e anche per ridurre i costi. In questo contesto, le aziende manifatturiere utilizzano spesso sistemi di produzione diversi, in base a ciò che richiede il mercato. Molto in generale, i sistemi produttivi possono essere classificati in due categorie principali: make-to-stock (MTS) e make-to-order (MTO), in base alla politica di risposta alla domanda del mercato. Nel nuovo contesto competitivo le aziende si sono trovate a dover produrre costantemente prodotti specifici e di alta qualità con costi unitari bassi e livelli di servizio elevati (ossia, tempi di consegna brevi). È chiaro, dunque, che una delle principali decisioni strategiche da prendere da parte delle aziende sia quella relativa alla ripartizione dei prodotti in MTS/MTO, ovvero quale prodotto o famiglia di prodotti può essere fabbricato per essere stoccato a magazzino (MTS), quale può essere prodotto su ordinazione (MTO) e quale dovrebbe essere fabbricato in base alla politica di produzione ibrida MTS/MTO. Gli ultimi anni hanno mostrato una serie di cambiamenti nella politica di produzione delle aziende, che si stanno gradualmente spostando sempre più verso la modalità̀ di produzione ibrida MTS/MTO. In particolare, questo elaborato si concentrerà sul delayed product differentiation (DPD), una particolare strategia produttiva ibrida, e ne verrà proposto un modello decisionale basato sul funzionamento dell’Analytic Network Process (ANP) implementato attraverso il software Superdecisions.

Increasing availability through maintainability growth using partial Multi Criteria Decision Making (pMCDM)

In the last decades considerations about equipments' availability became an important issue, as well as its dependence on components characteristics such as reliability and maintainability. This is particularly of outstanding importance if one is dealing with high risk industrial equipments, where these factors play an important and fundamental role in risk management when safety or huge economic values are in discussion. As availability is a function of reliability, maintainability, and maintenance support activities, the main goal is to improve one or more of these factors. This paper intends to show how maintainability can influence availability and present a methodology to select the most important attributes for maintainability using a partial Multi Criteria Decision Making (pMCDM). Improvements in maintainability can be analyzed assuming it as a probability related with a restore probability density function [g(t)].

Método multicritério como apoio a um processo de negociação numa empresa de serviços médicos

O processo de negociação tem ganho relevância como uma das formas de gestão de conflitos. Verifica-se que nas organizações a negociação é um processo omnipresente, que tem sido alvo de muito estudo e investigação, e as capacidades de negociação são consideradas determinantes para o sucesso. Em consequência dessas tendências, surgem propostas de modelos de negociação bastantes flexíveis e que visam colaboração entre as partes interessadas, modelos que se adequam aos contextos organizacionais em que predominam relações estáveis e de longo prazo. Estas propostas procuram a solução óptima para as partes interessadas. No entanto, faltam frequentemente os mecanismos e procedimentos que garantam um processo estruturado para elaborar e analisar os diversos cenários na negociação, considerando um conjunto de aspectos relevantes para ambas as partes. No presente trabalho de dissertação formula-se uma proposta baseada no modelo de negociação Win Win Quantitativa, em que foi utilizada uma abordagem do método multicritério Analitic Hierarchy Process (AHP) para seleccionar a melhor opção de serviço para uma determinada empresa. Para o caso de estudo, num contexto real, foi necessário desenvolver uma aplicação Excel que permitisse analisar, de uma forma clara, as diversas alternativas perante os critérios mencionados. A aplicação do método AHP permite aos clientes tomar uma decisão potencialmente mais acertada. A aplicação informática procura optimizar os custos inerentes à prestação de serviços, oferecendo aos clientes um custo reduzido e assim tornando a empresa mais competitiva e atractiva para os potenciais clientes.

Intelligent decision support systems for collaboration in industrial plants

Dissertação apresentada para obtenção do Grau de Doutor em Sistemas de Informação Industriais, Engenharia Electrotécnica, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Análise multicritério em Sistema de Informação Geográfica para localização de aterros sanitários. O caso da região sul da Ilha de Santiago, Cabo Verde

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Gestão do Território, Área de Especialização em Detecção Remota e Sistema de Informação Geográfica

Prospective system analysis of stationary battery systems under the frame of Constructive Technology Assessment

Based on the report for the unit “Project IV” of the PhD programme on Technology Assessment under the supervision of Dr.-Ing. Marcel Weil and Prof. Dr. António Brandão Moniz. The report was presented and discussed at the Doctorate Conference on Technologogy Assessment in July 2013 at the University Nova Lisboa, Caparica campus.

Essays on the measurement of school efficiency

Measuring school efficiency is a challenging task. First, a performance measurement technique has to be selected. Within Data Envelopment Analysis (DEA), one such technique, alternative models have been developed in order to deal with environmental variables. The majority of these models lead to diverging results. Second, the choice of input and output variables to be included in the efficiency analysis is often dictated by data availability. The choice of the variables remains an issue even when data is available. As a result, the choice of technique, model and variables is probably, and ultimately, a political judgement. Multi-criteria decision analysis methods can help the decision makers to select the most suitable model. The number of selection criteria should remain parsimonious and not be oriented towards the results of the models in order to avoid opportunistic behaviour. The selection criteria should also be backed by the literature or by an expert group. Once the most suitable model is identified, the principle of permanence of methods should be applied in order to avoid a change of practices over time. Within DEA, the two-stage model developed by Ray (1991) is the most convincing model which allows for an environmental adjustment. In this model, an efficiency analysis is conducted with DEA followed by an econometric analysis to explain the efficiency scores. An environmental variable of particular interest, tested in this thesis, consists of the fact that operations are held, for certain schools, on multiple sites. Results show that the fact of being located on more than one site has a negative influence on efficiency. A likely way to solve this negative influence would consist of improving the use of ICT in school management and teaching. Planning new schools should also consider the advantages of being located on a unique site, which allows reaching a critical size in terms of pupils and teachers. The fact that underprivileged pupils perform worse than privileged pupils has been public knowledge since Coleman et al. (1966). As a result, underprivileged pupils have a negative influence on school efficiency. This is confirmed by this thesis for the first time in Switzerland. Several countries have developed priority education policies in order to compensate for the negative impact of disadvantaged socioeconomic status on school performance. These policies have failed. As a result, other actions need to be taken. In order to define these actions, one has to identify the social-class differences which explain why disadvantaged children underperform. Childrearing and literary practices, health characteristics, housing stability and economic security influence pupil achievement. Rather than allocating more resources to schools, policymakers should therefore focus on related social policies. For instance, they could define pre-school, family, health, housing and benefits policies in order to improve the conditions for disadvantaged children.

Assessment of Customer Needs in Fine Coal Dewatering

Työn tavoitteena on kartoittaa ja arvioida asiakastarpeita hienojakoisen hiilen ja nesteen erotuksessa. Aluksi työssä kuvataan hiiliteollisuutta, jonka jälkeen syvennytäänhiilen ja nesteen erotukseen. Tämän jälkeen keskitytään asiakastarpeiden kartoittamiseen. Jo olemassaolevan tiedon keräämiseen käytetään haastatteluja ja kysymyslomakkeita. Saatyn AHP-mallia hyödynnetään asiakastarpeiden arvioinnissa. Yksi suurimmista haasteista puhtaan hiiliteknologian käytössä on kustannustehokas nesteen ja hienojakoisen hiilen erotus, joka on tärkeää rahtauskustannusten minimoinnin, laatuvaatimusten täyttämisen ja prosessiveden kierrättämisen kannalta. Tekniset ominaisuudet ja kustannukset ovat tärkeimmät ominaisuudet hiilen ja veden suodatinratkaisussa asiantuntijoiden mukaan. Asiakkaan mukaan laatu, tekniset ominaisuudet ja tukipalvelut ovat tärkeitä.Sekä asiakkaan että asiantuntijoiden mielestä korkea yksikkökapasiteetti, matala lopputuotteen kosteus ja luotettavuus ovat tärkeimmät tekniset ominaisuudet. Investointikustannukset ovat noin kolme kertaa tärkeämpiä kuin käyttökustannukset. Asiakkaan mukaan laitetoimittajan ominaisuudet ovat tärkeämpiä kuin teknologiset ominaisuudet.

Project Success through Effective Decisions: Case Studies on Project Goal Setting, Success Evaluation and Managerial Decision Making

The objective of the thesis is to structure and model the factors that contribute to and can be used in evaluating project success. The purpose of this thesis is to enhance the understanding of three research topics. The goal setting process, success evaluation and decision-making process are studied in the context of a project, business unitand its business environment. To achieve the objective three research questionsare posed. These are 1) how to set measurable project goals, 2) how to evaluateproject success and 3) how to affect project success with managerial decisions.The main theoretical contribution comes from deriving a synthesis of these research topics which have mostly been discussed apart from each other in prior research. The research strategy of the study has features from at least the constructive, nomothetical, and decision-oriented research approaches. This strategy guides the theoretical and empirical part of the study. Relevant concepts and a framework are composed on the basis of the prior research contributions within the problem area. A literature review is used to derive constructs of factors withinthe framework. They are related to project goal setting, success evaluation, and decision making. On the basis of this, the case study method is applied to complement the framework. The empirical data includes one product development program, three construction projects, as well as one organization development, hardware/software, and marketing project in their contexts. In two of the case studiesthe analytic hierarchy process is used to formulate a hierarchical model that returns a numerical evaluation of the degree of project success. It has its origin in the solution idea which in turn has its foundation in the notion of projectsuccess. The achieved results are condensed in the form of a process model thatintegrates project goal setting, success evaluation and decision making. The process of project goal setting is analysed as a part of an open system that includes a project, the business unit and its competitive environment. Four main constructs of factors are suggested. First, the project characteristics and requirements are clarified. The second and the third construct comprise the components of client/market segment attractiveness and sources of competitive advantage. Together they determine the competitive position of a business unit. Fourth, the relevant goals and the situation of a business unit are clarified to stress their contribution to the project goals. Empirical evidence is gained on the exploitation of increased knowledge and on the reaction to changes in the business environment during a project to ensure project success. The relevance of a successful project to a company or a business unit tends to increase the higher the reference level of project goals is set. However, normal performance or sometimes performance below this normal level is intentionally accepted. Success measures make project success quantifiable. There are result-oriented, process-oriented and resource-oriented success measures. The study also links result measurements to enablers that portray the key processes. The success measures can be classified into success domains determining the areas on which success is assessed. Empiricalevidence is gained on six success domains: strategy, project implementation, product, stakeholder relationships, learning situation and company functions. However, some project goals, like safety, can be assessed using success measures that belong to two success domains. For example a safety index is used for assessing occupational safety during a project, which is related to project implementation. Product safety requirements, in turn, are connected to the product characteristics and thus to the product-related success domain. Strategic success measures can be used to weave the project phases together. Empirical evidence on their static nature is gained. In order-oriented projects the project phases are oftencontractually divided into different suppliers or contractors. A project from the supplier's perspective can represent only a part of the ¿whole project¿ viewed from the client's perspective. Therefore static success measures are mostly used within the contractually agreed project scope and duration. Proof is also acquired on the dynamic use of operational success measures. They help to focus on the key issues during each project phase. Furthermore, it is shown that the original success domains and success measures, their weights and target values can change dynamically. New success measures can replace the old ones to correspond better with the emphasis of the particular project phase. This adjustment concentrates on the key decision milestones. As a conclusion, the study suggests a combination of static and dynamic success measures. Their linkage to an incentive system can make the project management proactive, enable fast feedback and enhancethe motivation of the personnel. It is argued that the sequence of effective decisions is closely linked to the dynamic control of project success. According to the used definition, effective decisions aim at adequate decision quality and decision implementation. The findings support that project managers construct and use a chain of key decision milestones to evaluate and affect success during aproject. These milestones can be seen as a part of the business processes. Different managers prioritise the key decision milestones to a varying degree. Divergent managerial perspectives, power, responsibilities and involvement during a project offer some explanation for this. Finally, the study introduces the use ofHard Gate and Soft Gate decision milestones. The managers may use the former milestones to provide decision support on result measurements and ad hoc critical conditions. In the latter milestones they may make intermediate success evaluation also on the basis of other types of success measures, like process and resource measures.

Erikoiskalustetuotannon työprojektin hallinta

Tutkimuksessa on selvitetty erikoiskalustevalmistuksen projektinhallinnan suunnittelun toteutusta, tukiprosesseja sekä projektien seurantaa. Tutkimuksessa verrataan teoreettista projektinhallintaa ja käytännön toteutusta erikoiskalusteita valmistavassa yrityksessä. Osa-alueina ovat projektisuunnitelma, suunnitelman seuranta, asiakastyytyväisyys ja laatu sekä työprosessin vaihtelut ja riskit. Tutkimusaineisto on koottu kyselyin, seurannalla ja haastatteluin kohdeyrityksessä. Tutkimuksessa on käytetty tilastollisia ja analyyttisen hierarkian (AHP) sekä monitavoiteoptimoinnin menetelmiä. Tuloksissa esitetään työprojektin hallinnan eri osa-alueet mukaan lukien projektin laatu sekä työprosessin vaihtelun ja riskien kannattavat hallintamahdollisuudet. Suosituksena kalustevalmistuksen työprojektien kehittämiseksi tutkimuksessa esitetään toimintaperiaatteet projektinhallintaohjelmistojen käyttöönotolle.

Data Envelopment Analysis and non-discretionary inputs : How to select the most suitable model using multi-criteria decision analysis

Within Data Envelopment Analysis, several alternative models allow for an environmental adjustment. The majority of them deliver divergent results. Decision makers face the difficult task of selecting the most suitable model. This study is performed to overcome this difficulty. By doing so, it fills a research gap. First, a two-step web-based survey is conducted. It aims (1) to identify the selection criteria, (2) to prioritize and weight the selection criteria with respect to the goal of selecting the most suitable model and (3) to collect the preferences about which model is preferable to fulfil each selection criterion. Second, Analytic Hierarchy Process is used to quantify the preferences expressed in the survey. Results show that the understandability, the applicability and the acceptability of the alternative models are valid selection criteria. The selection of the most suitable model depends on the preferences of the decision makers with regards to these criteria.

Priorization of Customer Needs for Paperboard Trays

The objectives of the study were to introduce current issues of chilled and frozen food packaging, priorize certain customer needs and review brand owners’ opinions and ways of actions. Packaging industry and packaged food markets were reviewed. Interviews of food industry brand owners are used as data sources. Analytic hierarchy process was used to prioritize the customer needs. Food packaging, special features of ready meals, chilled and frozen food packaging, packaging industry and packaged food markets in Europe are approached using literature and market reviews and forecasts. In empirical part the customer needs of paperboard trays are prioritized. The most important features for brand owners are related in product safety and environmental issues. Paperboard trays have benefits compared to its competing packaging solutions. Paperboard is recyclable, from renewable source and it has good printability. Emerging issues of packaging technology are biodegradable package, elderly friendly features such as easiness of opening and re-closing possibility, brand protection and tamper evident solutions.