Experimental culture of algal balls (Cladophora sauteri). Retention of original shape [Translation from: Bull.Jap.Soc.Phycol. Vol. 10, (1), p. 23-27, 1962]

It was on July 1960 when 10 algal balls were acquired for exhibition at Suma Aquarium, Kobe. Permission to remove the specimens from the Lake Akan Reserve was given by the National Nature Reserve Committee. Algal balls, as a rule, lose their natural beauty when they are kept in an ordinary tank for a certain length of time. In an effort to retain the natural beauty it was decided to exhibit them in culture. This paper summarises the findings of this experiments with Cladophora sauteri. The author concludes that serious consideration has to be given as to the intensity of light, the sunlight, the water temperature and the nutrition for algal balls in culture in order to retain the natural beauty and shape.

A contribution to the algal flora of the Kola Peninsula [Translation from: Trudy Institut Botaniki Trudy Institut Botaniki Kharkivskii. Univ Vol. 4, pp. 53-76, 1941]

During recent years in connection with the industrialisation of the Kola Peninsula, the study of this district in the botanical respect, in particular the study of the microflora of various bodies of water, began to advance markedly. This article describes the algal flora of the Kola Peninsula. Morphological descriptions are given for three Tetraspora: Tetraspora simplex, Tetraspora tenera, Tetraspora imperfecta. Chlorophysema aduata is also described, and short descriptions of further algae found in the Kola Peninsula are given.

Sphaerotilus natans: description of the morphology, growth and systematics of [Translation from: Schr. Ver. Zellstoff u. Pap.-Chem. u. -Ing., 26, 20-37, 1956]

The morphology, increase and systematica of Sphaerotilus natans is studied and culture methods examined.

Modelling algal blooms

This is the final report on the research project to develop predictive models to quantify algal blooms in relation to environmental variables. The project's objectives were to develop models simulating the impact of vertical structure and mass transfer upon the dynamics of planktonic algae, including cyanobacteria, in lakes and reservoirs, to assess the potential of sedimentary phosphorus to sustain algal growth following reduction in external loading and to expand and enhance formulations to predict behaviour of blue-green algal populations and to incorporate these into a model software package. As part of the project a strategy for the production of a user-friendly packaging for the modelling software PROTEC-2 adaptable to particular sites was developed.

The impact of physical processes on algal growth

Mixing and transport processes in surface waters strongly influence the structure of aquatic ecosystems. The impact of mixing on algal growth is species-dependent, affecting the competition among species and acting as a selective factor for the composition of the biocoenose. Were it not for the ever-changing ”aquatic weather”, the composition of pelagic ecosystems would be relatively simple. Probably just a few optimally adapted algal species would survive in a given water-body. In contrast to terrestrial ecosystems, in which the spatial heterogeneity is primarily responsible for the abundance of niches, in aquatic systems (especially in the pelagic zone) the niches are provided by the temporal structure of physical processes. The latter are discussed in terms of the relative sizes of physical versus biological time-scales. The relevant time-scales of mixing and transport cover the range between seconds and years. Correspondingly, their influence on growth of algae is based on different mechanisms: rapid changes are relevant for the fast biological processes such as nutrient uptake and photosynthesis, and the slower changes are relevant for the less dynamic processes such as growth, respiration, mineralization, and settling of algal cells. Mixing time-scales are combined with a dynamic model of photosynthesis to demonstrate their influence on algal growth.

A tool for better management of water quality during periods of algal blooms: the case of the River Oise

Like other rivers in the Paris area, the Oise is subject to important seasonal algal blooms. This eutrophication generates notable problems for the production of drinking-water from a treatment plant on the river at Méry. A mathematical model has been developed to simulate variation in water quality in a pre-treatment storage basin, and another model is currently being adapted to model the River Oise. Integration of the two models should provide a comprehensive tool for predicting variations of phytoplankton and water-quality parameters associated with algal blooms. This will be a decision-aid for optimizing control of the treatment process for providing potable water.

The effects of stress on benthic algal communities

The effects of stress on both microalgal and macroalgal communities are considered. On one hand the contrasting approaches of studies of these two communities reflect intrinsic differences in plant size, longevity and ease of handling. On the other hand they reveal that biological monitoring of the potentially deleterious effects of man's activities has focused largely on freshwater environments in which macroalgae only occasionally dominate. Large conspicuous plants can be readily investigated as individuals, whereas it is virtually impossible to trace effects of stress on an individual cell of a vegetatively-reproducing microalga; a population approach is almost inevitably necessary. However, rapid turnover rates, a spectrum of ecological characteristics distributed between many taxa, and the potential for statistical analysis, have facilitated the use of microalgae in environmental impact studies. Failure to extend such investigations into marine systems rests as much on man's ability to ignore environmental deterioration until it affects his quality of life as on the visual dominance of seaweeds around our coasts. However, large gaps remain in our knowledge of both large and small algae; some reported community changes over time are suspect, and the causes of even blatant changes are not always apparent.

Influence of thermal annealing on optical properties and surface morphology of NiOx thin films

NiOx thin films were deposited by reactive DC-magnetron sputtering from a nickel metal target in Ar + O-2 with the relative O-2 content of 5%. Thermal annealing effects on optical properties and surface morphology of NiOx, films were investigated by X-ray photoelectron spectroscopy, thermogravimetric analysis, scanning electron microscope and optical measurement. The results showed that the changes in optical properties and surface morphology depended on the temperature. The surface morphology of the films changed obviously as the annealing temperature increased due to the reaction NiOx -> NiO + O-2 releasing O-2. The surface morphology change was responsible for the variation of the optical properties of the films. The optical contrast between the as-deposited films and 400 degrees C annealed films was about 52%. In addition, the relationship of the optical energy band gap with the variation of annealing temperature was studied. (c) 2006 Elsevier B.V. All rights reserved.

Study on the growth, etch morphology and spectra of Y2SiO5 crystal

Undoped Y2SiO5 single crystal was grown by the Czochralski method. The samples were optically polished after orienting and cutting. The rhombus and quadrangular dislocation etching pits, the low-angle grain boundaries and the inclusions in the samples were observed using optical microscope and scanning electron microscope. The absorption spectra were measured before and after H-2 annealing or air annealing. The absorption edge of Y2SiO5 crystal was determined to be about 202 nm. The absorption coefficient of Y2SiO5 crystal decreased after H-2 annealing and obviously increased after air annealing. (C) 2005 Elsevier B.V. All rights reserved.

Growth, etching morphology and spectra of LiAlO2 crystal

gamma-LiAlO2 single crystal was successfully grown by Czochralski method. The crystal quality was characterized by X-ray rocking curve and chemical etching. The effects of air-annealing and vapor transport equilibration (VTE) on the crystal quality, etch pits and absorption spectra of LiAlO2 were also investigated in detail. The results show that the as-grown crystal has very high quality with the full width at half maximum (FWHM) of 17.7-22.6 arcsec. Dislocation density in the middle part of the crystal is as low as about 3.0 x 10(3) cm(-2). The VTE-treated slice has larger FWHM value, etch pits density and absorption coefficient as compared with those of untreated and air-annealed slices, which indicates that the crystal quality became inferior after VTE treatment. (C) 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Laser-induced damage morphology of high-reflective optical coatings

Two different kinds of 1064 nm high-reflective (HR) coatings, with and without SiO2 protective layer, were prepared by electron beam evaporation. Three-dimensional damage morphology, caused by a Nd:YAG pulsed laser, was investigated for these HR coatings. Development of laser-induced damage on HR coatings was revealed by both temperature field calculation and discrete meso-element simulation. Theoretical results met experimental very well. (C) 2004 Elsevier B.V. All rights reserved.

Surface morphology and properties of zirconia thin films prepared at different deposition rates

ZrO2 thin films were prepared on BK7 glass substrates by electron beam evaporation deposition method. The influence of deposition rate varying from 1.2 to 6.3 nm s(-1) on surface morphology and other properties of ZrO2 films were examined. With increasing deposition rate, the surface defect density increased. The decrease in half width at full maximum in X-ray diffraction pattern with deposition rate indicates an increase in crystal dimension with increasing deposition rate. Electron beam deposited ZrO2 films are known to be inhomogeneous. From the change of the peak transmittance value, it can be deduced that the inhomogeneity of ZrO2 films strengthened gradually with increasing deposition rate. The type of surface defects changed from nodules to craters when the deposition rate was high enough.