Development and formulation of wax-based transdermal drug delivery systems

Topical and transdermal formulations are promising platforms for the delivery of drugs. A unit dose topical or transdermal drug delivery system that optimises the solubility of drugs within the vehicle provides a novel dosage form for efficacious delivery that also offers a simple manufacture technique is desirable. This study used Witepsol® H15 wax as a abase for the delivery system. One aspect of this project involved determination of the solubility of ibuprofen, flurbiprofen and naproxen in the was using microscopy, Higuchi release kinetics, HyperDSC and mathematical modelling techniques. Correlations between the results obtained via these techniques were noted with additional merits such as provision of valuable information on drug release kinetics and possible interactions between the drug and excipients. A second aspect of this project involved the incorporation of additional excipients: Tween 20 (T), Carbopol®971 (C) and menthol (M) to the wax formulation. On in vitro permeation through porcine skin, the preferred formulations were: ibuprofen (5% w/w) within Witepsol®H15 + 1% w/w T; flurbiprofen (10% w/w) within Witepsol®H15 + 1% w/w T; naproxen (5% w/w) within Witepsol®H15 + 1% w/w T + 1% C and sodium diclofenac (10% w/w) within Witepsol®H15 + 1% w/w T + 1% w/w T + 1% w/w C + 5% w/w M. Unit dose transdermal tablets containing ibuprofen and diclofenac were produced with improved flux compared to marketed products; Voltarol Emugel® demonstrated flux of 1.68x10-3 cm/h compared to 123 x 10-3 cm/h for the optimised product as detailed above; Ibugel Forte® demonstrated a permeation coefficient value of 7.65 x 10-3 cm/h compared to 8.69 x 10-3 cm/h for the optimised product as described above.

Improving diagnosis and oral vaccination strategies against bovine tuberculosis

In this work peptide antigens [ESAT-6,p45 in water (1ml, 1mg/ml)] have been adsorbed onto 10mg inorganic substrates (hydroxyapatite (MHA P201;P120, CHA), polystyrene, calcium carbonate and glass microspheres) and in vitro release characteristics were determined. The aim of formulation was to enhance the interaction of peptides with antigen presenting cells and to achieve rapid peptide release from the carrier compartment system in a mildly acidic environment. Hydroxyapatite microparticle P201 has a greater surface area and thus has the largest peptide adsorption compared to the P120. CHA gave a further higher adsorption due to larger surface area than that available on microparticles. These particles were incorporated into the BOVIGAMTM assay to determine if they improve the sensitivity. After overnight incubation the blood plasma was removed and the amount of IFN-g in each plasma sample was estimated. CHA and MHA P201 gave a significantly higher immune response at low peptide concentration compared to the free peptide, thus indicating that these systems can be used to evaluate Tuberculosis (TB) amongst cattle using the BOVIGAMTM assay. Badgers are a source of TB and pass infection to cattle. At the moment vaccination against TB in badgers is via the parenteral route and requires a trained veterinary surgeon as well as catching the badgers. This process is expensive and time consuming; consequently an oral delivery system for delivery of BCG vaccines is easier and cheaper. The initial stage involved addition of various surfactants and suspending agents to disperse BCG and the second stage involved testing for BCG viability. Various copolymers of Eudragit were used as enteric coating systems to protect BCG against the acidic environment of the stomach (SGF, 0.1M HCl pH 1.2 at 37oC) while dissolving completely in the alkaline environment of the small intestine (SIF, IM PBS solution pH 7.4 at 37oC). Eudragit L100 dispersed in 2ml PBS solution and 0.9ml Tween 80 (0.1%w/v) gave the best results remaining intact in SGF loosing only approximately 10-15% of the initial weight and dissolving completely within 3 hours. BCG was incorporated within the matrix formulation adjusted to pH 7 at the initial formulation stage containing PBS solution and Tween 80. It gave viability of x106 cfu/ml at initial formulation stage, freezing and freeze-drying stages. After this stage the matrix was compressed at 4 tons for 3 mins and placed in SGF for 2 hours and then in SIF until dissolved. The BCG viability dropped to x106 cfu/ml. There is potential to develop it further for oral delivery of BCG vaccine.

Amino acid, peptide and drug transport across monolayers of human intestinal (CAC0-2) cells in vitro

The properties of Caco-2 monolayers were compared on aluminium oxide and nitrocellulose permeable-supports. On nitrocellulose, Caco-2 cells displayed a higher rate of taurocholic acid transport than those cultured on aluminium oxide inserts. In addition, Caco-2 cells grown on these two inserts were not comparable with respect to cell morphology, cell numbers and transepithelial electrical resistance. The low adsorption potential of the aluminium oxide inserts, particularly for high molecular weight or lipophilic ligands, offers a distinct advantage over nitrocellulose inserts for drug transport studies. The carrier-mediated uptake and transport of the imino acid (L-proline) and the acidic amino acids (L-aspartate and L-glutamate) have been studied. At pH7.4, L-proline uptake is mediated via an A-system carrier. Elevated uptake and transport under acidic conditions occurs by activation of a distinct carrier population. Acidic amino acid transport is mediated via a X-AG system. The flux of baclofen, CGP40116 andCGP40117 across Caco-2 monolayers was described by passive transport. The transport of three peptides, thyrotrophin-releasing hormone, SQ29852 and cyclosporin were investigated. Thyrotrophin-releasing hormone transport acrossCaco-2 monolayers was characterised by a minor saturable (carrier-mediated,approximately 25%) pathway, superimposed onto a major non-saturable (diffusional)pathway. SQ29852 uptake into Caco-2 monolayers is described by a major saturable mechanism (Km = 0.91 mM) superimposed onto a minor passive component.However, the initial-rate of SQ29852 transport is consistent with a passive transepithelial transport mechanism. These data highlight the possibility that itsbasolateral efflux is severely retarded such that the passive paracellular transportdictates the overall transepithelial transport characteristics. In addition, modelsuitable for investigating the transepithelial transport of cyclosporin A has been developed. A modification of the conventional Caco-2 model has been developed which has a calcium-free Ap donor-solution and a Bl receiver-solution containing the minimumcalcium concentration required to maintain monolayer integrity (100 μM). The influence of calcium and magnesium on the absorption of [14C]pamidronate was evaluated by comparing its transport across the conventional and minimum calciumCaco-2 models. Ap calcium and magnesium ions retard the Ap-to-Bl flux of pamidronate across Caco-2 monolayers. The effect of self-emulsifying oleic acid-Tween 80 formulations on Caco-2monolayer integrity has been investigated. Oleic acid-Tween 80 (1 0:1) formulations produced a dose-dependent disruption of Caco-2 monolayer integrity. This disruption was related to the oleic acid content of the formulation.

Skin adhesive hydrogels for the topical delivery of active agents

This thesis illustrates the development of tailor-made, partially hydrated skin adhesive hydrogels as a vehicle for the topical delivery of moisturising agents. Maintaining an optimum hydration level of the stratum corneum ensures that the barrier properties of the skin are preserved. An unsaturated ionic monomer 2-acrylamido-2-methylpropanesulfonic acid sodium salt, glycerol, water, a photoinitiator Irgacure 184 and crosslinker Ebacryl II facilitated the production of monophasic sheet skin adhesives using photopolymerisation. The exploration and modification of the hydrogel components coupled with their influence on the adhesive and dynamic mechanical behaviour led to the development of novel monophasic and biphasic hydrogels. Biphasic pregels comprising of a hydrophobic monomer (epoxidised soybean oil acrylate, lauryl acrylate or stearyl acrylate) micellised with a non ionic surfactant Tween 60 allowed a homogeneous distribution throughout a predominantly hydrophilic phase (2-acrylamido-2-methylpropanesulfonic acid sodium salt, 4-acryloylmorpholine, glycerol and water). Further development of biphasic hydrogel technology led to the incorporation of preformed commercial O/W emulsions (Acronal, Flexbond 150, DM137 or Texicryl 13056WB) allowing the hydrophobic component to be added without prior stabilisation. The topical release of moisturising agents 2-pyrrolidone-5-carboxylic acid, lactobionic acid and d-calcium pantothenate results in the deposition onto the skin by an initial burst mechanism. The hydration level of the stratum corneum was measured using a Comeometer CM 825, Skin Reader MY810 or FT-ATR. The use of hydrophilic actives in conjunction with lipophilic agents for example Vitamin E or Jojoba oil provided an occlusive barrier, which reduced the rate of transepidermal water loss. The partition coefficients of the release agents provided invaluable information which enabled the appropriate gel technology to be selected. In summary the synthetic studies led to the understanding and generation of transferable technology. This enabled the synthesis of novel vehicles allowing an array of actives with a range of solubilities to be incorporated.

miRNAS circulantes como biomarcadores para fibrilação atrial aguda

Atrial fibrillation (AF) is the most common sustained cardiac arrhythmia. Some non-coding RNAs (miRNAs) have been involved in regulatory activity in arrhythmogenesis, targeting genes that contribute to the development of AF. The present study aimed to evaluate the expression of candidate miRNAs in plasma from patients with AF and new-onset AF and its application as future markers for diagnosis and monitoring of disease. miR-21, miR-133a, miR-133b, miR-150, miR-328 and miR-499 were selected as targets in this study through a prior literature review. They were isolated from plas-ma of individuals aged from 20 to 85 years old with AF (n = 17), new-onset AF (n = 5) and without AF (n = 15), where the latter was the control group. The results were ana-lyzed by Real-Time PCR (RT-PCR) with miScript SYBR Green PCR. We observed that miR-21, miR-133b, miR-328 and miR-499 had different levels of expression be-tween the three groups (p <0.05). Increased expression of miR-21 (0.6-fold), miR-133b (1.4-fold), miR-328 (2.0-fold) and miR-499 (2.3-fold) in patients with new-onset AF when compared to AF and control subjects. The miR-133a and miR-150 expression did not differ among the groups. miR-21, miR-133b, miR-328 and miR-499 may be potential biomarkers for AF as well as for new-onset AF, for monitoring and for the di-agnosis. These findings may contribute to the understanding of the process that trig-gers AF and suggest application these molecules as future biomarkers for AF.

miRNAS circulantes como biomarcadores para fibrilação atrial aguda

Atrial fibrillation (AF) is the most common sustained cardiac arrhythmia. Some non-coding RNAs (miRNAs) have been involved in regulatory activity in arrhythmogenesis, targeting genes that contribute to the development of AF. The present study aimed to evaluate the expression of candidate miRNAs in plasma from patients with AF and new-onset AF and its application as future markers for diagnosis and monitoring of disease. miR-21, miR-133a, miR-133b, miR-150, miR-328 and miR-499 were selected as targets in this study through a prior literature review. They were isolated from plas-ma of individuals aged from 20 to 85 years old with AF (n = 17), new-onset AF (n = 5) and without AF (n = 15), where the latter was the control group. The results were ana-lyzed by Real-Time PCR (RT-PCR) with miScript SYBR Green PCR. We observed that miR-21, miR-133b, miR-328 and miR-499 had different levels of expression be-tween the three groups (p <0.05). Increased expression of miR-21 (0.6-fold), miR-133b (1.4-fold), miR-328 (2.0-fold) and miR-499 (2.3-fold) in patients with new-onset AF when compared to AF and control subjects. The miR-133a and miR-150 expression did not differ among the groups. miR-21, miR-133b, miR-328 and miR-499 may be potential biomarkers for AF as well as for new-onset AF, for monitoring and for the di-agnosis. These findings may contribute to the understanding of the process that trig-gers AF and suggest application these molecules as future biomarkers for AF.

Tsunami simulation and detection using global navigation satellite system reflectometry

In this thesis, research for tsunami remote sensing using the Global Navigation Satellite System-Reflectometry (GNSS-R) delay-Doppler maps (DDMs) is presented. Firstly, a process for simulating GNSS-R DDMs of a tsunami-dominated sea sur- face is described. In this method, the bistatic scattering Zavorotny-Voronovich (Z-V) model, the sea surface mean square slope model of Cox and Munk, and the tsunami- induced wind perturbation model are employed. The feasibility of the Cox and Munk model under a tsunami scenario is examined by comparing the Cox and Munk model- based scattering coefficient with the Jason-1 measurement. A good consistency be- tween these two results is obtained with a correlation coefficient of 0.93. After con- firming the applicability of the Cox and Munk model for a tsunami-dominated sea, this work provides the simulations of the scattering coefficient distribution and the corresponding DDMs of a fixed region of interest before and during the tsunami. Fur- thermore, by subtracting the simulation results that are free of tsunami from those with presence of tsunami, the tsunami-induced variations in scattering coefficients and DDMs can be clearly observed. Secondly, a scheme to detect tsunamis and estimate tsunami parameters from such tsunami-dominant sea surface DDMs is developed. As a first step, a procedure to de- termine tsunami-induced sea surface height anomalies (SSHAs) from DDMs is demon- strated and a tsunami detection precept is proposed. Subsequently, the tsunami parameters (wave amplitude, direction and speed of propagation, wavelength, and the tsunami source location) are estimated based upon the detected tsunami-induced SSHAs. In application, the sea surface scattering coefficients are unambiguously re- trieved by employing the spatial integration approach (SIA) and the dual-antenna technique. Next, the effective wind speed distribution can be restored from the scat- tering coefficients. Assuming all DDMs are of a tsunami-dominated sea surface, the tsunami-induced SSHAs can be derived with the knowledge of background wind speed distribution. In addition, the SSHA distribution resulting from the tsunami-free DDM (which is supposed to be zero) is considered as an error map introduced during the overall retrieving stage and is utilized to mitigate such errors from influencing sub- sequent SSHA results. In particular, a tsunami detection procedure is conducted to judge the SSHAs to be truly tsunami-induced or not through a fitting process, which makes it possible to decrease the false alarm. After this step, tsunami parameter estimation is proceeded based upon the fitted results in the former tsunami detec- tion procedure. Moreover, an additional method is proposed for estimating tsunami propagation velocity and is believed to be more desirable in real-world scenarios. The above-mentioned tsunami-dominated sea surface DDM simulation, tsunami detection precept and parameter estimation have been tested with simulated data based on the 2004 Sumatra-Andaman tsunami event.

MEDIUM-CHAIN-LENGTH POLY(3-HYDROXYALKANOATE) NANOPARTICLE SUSPENSIONS

The main goal of this thesis was to prepare medium-chain-length poly-3-hydroxyalkanoate (mcl-PHA) nanoparticle suspensions at high solids content (≥ 10 % w/v). A two-stage emulsification-solvent evaporation process was employed to produce poly-3-hydroxydecanoate (PHD) suspensions. The formulation and processing conditions including ultrasonication time and amplitude, selection of solvent, and selection of surfactants and their concentrations were investigated to make concentrated suspensions (10 and 30 % (w/v)) of PHD with particles less than 300 nm. Among the ionic surfactants tested to stabilize the suspension, the anionic, sodium dodecyl sulphate (SDS), and the cationic, dodecyltrimethylammonium bromide (DTAB) surfactants produced the smallest particle sizes (~100 nm). However, more stabilized nanoparticles were obtained when the ionic surfactant, SDS, was combined with any of the non-ionic surfactants tested, with polyoxyethylene octyl phenyl ether (Triton X-100) or polyoxyethylene (20) sorbitan monooleate (Tween 80) resulting in a slight increase in zeta potential over 30 days while the zeta potential with other non-ionic surfactants decreased. Mcl-PHA containing 11 and 18 % of carboxyl groups was synthesized via free radical addition reaction of 11-mercaptoundecanoic acid to the pendant double bonds of unsaturated poly-3-hydroxynonanoate (PHNU). Colloidal suspensions prepared by ultrasonication needed a surfactant to maintain stability, even at 0.4 % solids of mcl-PHA containing 11 % carboxylation (PHNC-1) unlike the stable suspensions prepared without surfactants by the titration method. Similar particle sizes (155.6 ± 8.4 to 163.4 ± 11.3 nm) and polydispersity indices (0.42 ± 0.03 to 0.49 ± 0.04) were obtained when several non-ionic surfactants were tested to minimize particle agglomeration, with the smallest particles obtained with Triton X-100. When Triton X-100 was combined with a variety of ionic surfactants, smaller nanoparticles (97.1 ± 1.1 to 121.7 ± 5.7 nm) with a narrower particle size distribution (0.21 ± 0.001 to 0.25 ± 0.003) were produced. The SDS and Triton X-100 combination was chosen to evaluate other mcl-PHAs at 10 % (w/v) solids content. Slightly smaller nanoparticles were formed with carboxylated mcl-PHAs compared to mcl-PHAs having aliphatic pendant side chains. Mcl-PHA consisting of 18 % carboxylation (PHNC-2) formed a much smaller nanoparticles and higher zeta potential.

The activity of the feminist online publications: challenges for the transmission of the feminist culture in Spain

Traditionally, big media corporations have contributed to hiding the women’s movement itself, as well as its main claims and topics of discussion (Marx, Myra y Hess, 1995; Rhode, 1995; Mendes, 2011). This has led the feminist movement to develop its own media generally print publications, usually, with a very specialized character and reduced audience. This is similar to what has occurred with quality main stream media, asthese publications have had to adapt themselves to a new communicatiion context, because of the financial crisis and  technological evolution. Feminist media has found in the Internet an excellent opportunity to access citizens and communicate their messages. , In view of this scene of change and renovation,  this article offers the results of a qualitative analysis focused on the experiences of four feminist online media sites edited in Spain: Pikaramagazine.com, Proyecto-kahlo.com, Mujeresenred.net and Laindependent.cat. Besides exploring the characteristics and content of these sites, the article pays attention to the virality of their contents spread through Facebook and Twitter. The onclusion estimates their social impact, insofar as they symbolize the specialization, diversification and dialogue promoted by the Web.

PEG-based solid dispersions enhanced the solubility and dissolution of eprosartan mesylate in-vitro

Abstract - This study investigates the effect of solid dispersions prepared from of polyethylene glycol (PEG) 3350 and 6000 Da alone or combined with the non-ionic surfactant Tween 80 on the solubility and dissolution rate of a poorly soluble drug eprosartan mesylate (ESM) in attempt to improve its bioavailability following its oral administration.

INTRODUCTION

ESM is a potent anti-hypertension [1]. It has low water solubility and is classified as a Class II drug as per the Biopharmaceutical Classification Systems (BCS) leading to low and variable oral bioavailability (approximately 13%). [2]. Thus, improving ESM solubility and/or dissolution rate would eventually improve the drug bioavailability. Solid dispersion is widely used technique to improve the water solubility of poorly water-soluble drugs employing various biocompatible polymers. In this study, we aimed to enhance the solubility and dissolution of EMS employing solid dispersion (SD) formulated from two grades of poly ethylene glycol (PEG) polymers (i.e. PEG 3350 & PEG 6000 Da) either individually or in combination with Tween 80.

MATERIALS AND METHODS

ESM SDs were prepared by solvent evaporation method using either PEG 3350 or PEG 6000 at various (drug: polymer, w/w) ratios 1:1, 1:2, 1:3, 1:4, 1:5 alone or combined with Tween 80 added at fixed percentage of 0.1 of drug by weight?. Physical mixtures (PMs) of drug and carriers were also prepared at same ratios. Drug solid dispersions and physical mixtures were characterized in terms of drug content, drug dissolution using dissolution apparatus USP II and assayed using HPLC method. Drug dissolution enhancement ratio (ER %) from SD in comparison to the plain drug was calculated. Drug-polymer interactions were evaluated using Differential Scanning Calorimetry (DSC) and FT-IR.

RESULTS AND DISCUSSION

The in vitro solubility and dissolution studies showed SDs prepared using both polymers produced a remarkable improvement (p<0.05) in comparison to the plain drug which reached around 32% (Fig. 1). The dissolution enhancement ratio was polymer type and concentration-dependent. Adding Tween 80 to the SD did not show further dissolution enhancement but reduced the required amount of the polymer to get the same dissolution enhancement. The DSC and FT-IR studies indicated that using SD resulted in transformation of drug from crystalline to amorphous form.

CONCLUSIONS

This study indicated that SDs prepared by using both polymers i.e. PEG 3350 and PEG 6000 improved the in-vitro solubility and dissolution of ESM remarkably which may result in improving the drug bioavailability in vivo.

Acknowledgments

This work is a part of MSc thesis of O.M. Ali at the Faculty of Pharmacy, Aleppo University, Syria.

REFERENCES

[1] Ruilope L, Jager B: Eprosartan for the treatment of hypertension. Expert Opin Pharmacother 2003; 4(1):107-14

[2] Tenero D, Martin D, Wilson B, Jushchyshyn J, Boike S, Lundberg, D, et al. Pharmacokinetics of intravenously and orally administered Eprosartan in healthy males: absolute bioavailability and effect of food. Biopharm Drug Dispos 1998; 19(6): 351- 6.

DISPERSÕES AQUOSAS DE POLIURETANO COMO MATERIAL BASE PARA O DESENVOLVIMENTO DE SISTEMAS DE LIBERTAÇÃO CONTROLADA DE CETOPROFENO

O cetoprofeno (ácido 2-(3-benzoilfenil) propiónico) é um anti-inflamatório não esteroidal (AINE) utilizado no tratamento de uma grande variedade de doenças inflamatórias agudas e crónicas incluindo a artrite reumatoide, osteoartrite e espondilite anquilosante. A sua administração oral prolongada está associada a diversas reações gastrointestinais, tais como irritações e ulcerações. Neste contexto, é importante desenvolver sistemas alternati-vos, nomeadamente sistemas de libertação controlada para administração oral, transdér-mica ou intradérmica. Este trabalho tem como objetivo testar a possibilidade de utilização de dispersões aquosas de poliuretano (PUDs) como material de suporte para a produção de sistemas de liberta-ção controlada de cetoprofeno. Numa primeira etapa, foram sintetizadas PUDs de base poliéster (policaprolactona, PCL) e poliéter (polipropileno-glicol, PPG) utilizando o méto-do de pré-polímero modificado. As dispersões obtidas foram caracterizadas em termos de pH, viscosidade, teor de sólidos e tamanho de partícula. Numa segunda etapa, foi testada a incorporação do cetoprofeno nas PDUs produzidas utilizando duas estratégias para incre-mentar a sua solubilidade em água: (i) utilização de um co-solvente (acetona, DMSO e HYD) e (ii) utilização de um surfactante não iónico (Tween 80). A incorporação foi testada para teores de 5% e 10% (razão fármaco/polímero, m/m). Os filmes produzidos pelo méto-do da evaporação do solvente foram avaliados quanto à sua homogeneidade e caracteriza-dos por FTIR e DSC. Numa terceira fase realizaram-se estudos de libertação em tampão de fosfato salino (PBS) de pH 7.5 tendo como objetivo avaliar a viabilidade de desenvolvimen-to de diferentes tipologias de dispositivos dependendo de um compromisso entre as pro-priedades dos filmes e o comportamento de libertação. Os resultados obtidos podem ajudar na seleção do material de base mais adequado para um determinado fim. Adicionalmente, e mais importante, comprovou-se a viabilidade de utilizar PUDs como material base para o desenvolvimento de sistemas de libertação con-trolada, utilizando como exemplo o cetoprofeno. A avaliação da toxicidade e da atividade anti-inflamatória dos filmes produzidos foi considerada estando em curso neste momento no grupo do Professor Armando Cunha Júnior.

Arbetsplatsförlagt lärande (APL) - handledares uppfattningar av vad elever ska lära sig samt vad och hur kunskapen ska bedömas

Inom ramen för gymnasieskolans yrkesprogram förläggs en del av elevens utbildning på en arbetsplats, APL. APL är betydelsefull för yrkesprogrammen eftersom hela utbildningen syftar till att knyta an till kommande yrkesroll och lära sig yrket tillsammans med redan yrkesverksamma. Bakgrunden till föreliggande studie är ett intresse för vilket lärande som pågår ute på arbetsplatserna och vad handledarna uppfattar som viktigt lärande för kommande yrkesutövning. Syftet med studien är att beskriva vad handledarna uppfattar att eleverna ska lära sig samt bedömning av elevernas kunskapsutveckling under APL. Studien är en kvalitativ studie och har omfattat intervjuer med 12 handledare med anknytning till gymnasieskolans bygg- och anläggningsprogram. Studien tar sin utgångspunkt i livsvärldsfenomenologin med fenomenografi som metodisk ansats för att beskriva handledarnas uppfattningar av APL. Resultatet av studien visar att handledarna beskriver att de inte har fått tillräckligt med kunskap och information från skolan om vad eleverna ska lära sig på APL. Detta kan innebära svårigheter att hitta passande arbetsuppgifter. Det råder vidare en brist på kunskap om vad och hur de bedömer elevernas lärande vilket leder till att eleverna bedöms på oklara grunder. Sammanfattningsvis visar således studien att det finns delar av APL som behöver förbättras och utvecklas för att nå en högre kvalitet i det arbetsplatsförlagda lärandet. Samarbetet skola och fö-retag måste förbättras, och fler handledare måste få en pedagogisk handledarutbildning.

A integração e compreensão do desenho na modelação 3D : enquadramento académico

Na medida em que os produtos e os processos de criação são cada vez mais mediados digitalmente, existe uma reflexão recente acerca da relação entre as imagens e as ferramentas usadas para a sua produção. A relação natural e estreita entre a dimensão conceptual e a dimensão física abre a discussão ao nível da semântica e dos processos da projetação e manipulação das imagens, nas quais estão naturalmente incluídas as ferramentas CAD. Tendo o desenho um papel inequívoco e fundamental no exercício da projetação e da modelação 3D é pertinente perceber a relação e a articulação entre estas duas ferramentas. Reconhecendo o desenho como uma ferramenta de domínio físico capaz de expressar o pensamento que opera a transformação de concepções abstratas em concepções concretas, reconhecê-lo refletido na dimensão virtual através de um software CAD 3D não é trivial, já que este, na generalidade, é processado através de um pensamento cujo contexto é distante da materialidade. Metodologicamente, abordaremos esta questão procurando a verificação da hipótese através de uma proposta de exercício prático que procura avaliar o efeito que as imagens analógicas poderão ter sobre o reconhecimento e operatividade da ferramenta Blender num enquadramento académico. Pretende-se, pois, perceber como o desenho analógico pode integrar o processo de modelação 3D e qual a relação que mantém com quem elas opera. A articulação do desenho com as ferramentas de produção de design, especificamente CAD 3D, permitirá compreender na especialidade a articulação entre ferramentas de diferentes naturezas tanto no processo da projetação quanto na criação de artefactos visuais. Assim como poderá lançar a discussão acerca das estratégias pedagógicas de ensino do desenho e do 3D num curso de Design.

Efeito de agentes de controle sobre a qualidade reprodutiva de rainhas de Apis mellifera L. (Hymenoptera: Apidae) africanizadas

The agriculture with the use of products with less environmental impact is expanding. In it, the producers offer their products without the use of synthetic chemical inputs, solving the phytosanitary problems with the use of biological or alternative control agents such as parasites, predators, entomopathogenic, alternative products, plant extracts and essential oils. These products can be considered safe to non-target organisms, but studies are needed to find these features on natural enemies and on the beneficial insects such as bees, common frequenter of cultures. In this sense, this study aims to evaluate the effects of control over reproductive quality queens of Apis mellifera L. (Hymenoptera: Apidae) Africanized. For this, it tested the action of control products on the production of A. mellifera queens, using the commercial entomopathogenic fungus Boveril® 1,0x108 (Beauveria bassiana) and aqueous extract of pomegranate (Punica granatum) at a concentration of 5% sterile distilled water with Tween (0.01%) and sterile distilled water (controls). The treatments were incorporated into a tissue type gauze, wrapped in an acrylic plate and packed inside minirrecrias type colonies for the production of queens on the day before the transfer of larvae. The next day were introduced battens with 30 domes with larvae to produce queens, so the workers have contacted the agent tested. From the emergence of all the queens, they were monitored to determine the measures of body weight (mg), length and width of wing and abdomen, length, width and height of the chest (mm) as well as the time of emergence of queens. The next step was evaluated the influence of the control agents in production creates, performing measurements of creating areas in cm2 for six straight weeks. It was found that the area creates Queens did not differ among the treatments. Histological analysis of hipofaringeanas of workers glands that came into contact with the control agents and the midgut of virgin queens were also held. Histological analysis differences were observed in the tissues when the treatments were compared with the respective controls.

Optimization of lipase production from yeasts strains isolated from olive mil wastewater

Dissertação submetida à Universidade de Lisboa, Faculdade de Ciências para a obtenção do Grau de Mestre em Microbiologia Aplicada.