Desgaste de polímeros estruturais de engenharia em contato de deslizamento com cilindro metálico

Present work proposed to map and features the wear mechanisms of structural polymers of engineering derived of the sliding contact with a metallic cylindrical spindle submitted to eccentricity due to fluctuations in it is mass and geometric centers. For this it was projected and makes an experimental apparatus from balancing machine where the cylindrical counterbody was supported in two bearings and the polymeric coupon was situated in a holder with freedom of displacement along counterbody. Thus, the experimental tests were standardized using two position of the two bearings (Fixed or Free) and seven different positions along the counterbody, that permit print different conditions to the stiffness from system. Others parameters as applied normal load, sliding velocity and distance were fixed. In this investigation it was used as coupon two structural polymers of wide quotidian use, PTFE (polytetrafluroethylene) and PEEK (poly-ether-ether-ketone) and the AISI 4140 alloy steel as counterbody. Polymeric materials were characterized by thermal analysis (thermogravimetric, differential scanning calorimetry and dynamic-mechanical), hardness and rays-X diffractometry. While the metallic material was submitted at hardness, mechanical resistance tests and metallographic analysis. During the tribological tests were recorded the heating response with thermometers, yonder overall velocity vibration (VGV) and the acceleration using accelerometers. After tests the wear surface of the coupons were analyzed using a Scanning Electronic Microscopy (SEM) to morphological analysis and spectroscopy EDS to microanalysis. Moreover the roughness of the counterbody was characterized before and after the tribological tests. It was observed that the tribological response of the polymers were different in function of their distinct molecular structure. It were identified the predominant wear mechanisms in each polymer. The VGV of the PTFE was smaller than PEEK, in the condition of minimum stiffness, in function of the higher loss coefficient of that polymer. Wear rate of the PTFE was more of a magnitude order higher than PEEK. With the results was possible developed a correlation between the wear rate and parameter (E/ρ)1/2 (Young modulus, E, density, ρ), proportional at longitudinal elastic wave velocity in the material.

Avaliação tribológica dos polímeros NBR, PTFE e PTFE gravitado em contato com aço AISI 52100

Low cost seals are made of NBR, Nitrile Butadiene Rubber, a family of unsaturated copolymers that is higher resistant to oils the more content of nitrile have in its composition, although lower its flexibility. In Petroleum Engineering, NBR seal wear can cause fluid leakage and environmental damages, promoting an increasing demand for academic knowledge about polymeric materials candidate to seals submitted to sliding contacts to metal surfaces. This investigation aimed to evaluate tribological responses of a commercial NBR, hardness 73 ± 5 Sh A, polytetrafluoroethylene (PTFE), hardness 60 ± 4 HRE and PTFE with graphite, 68 ± 6 HRE. The testings were performed on a sliding tribometer conceived to explore the tribological performance of stationary polymer plane coupons submitted to rotational cylinder contact surface of steel AISI 52100, 20 ± 1 HRC Hardness, under dry and lubricated (oil SAE 15W40) conditions. After screening testings, the normal load, relative velocity and sliding distance were 3.15 N, 0.8 m/s and 3.2 km, respectively. The temperatures were collected over distances of 3.0±0.5 mm and 750±50 mm far from the contact to evaluate the heating in this referential zone due to contact sliding friction by two thermocouples K type. The polymers were characterized through Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA). The wear mechanisms of the polymer surfaces were analyzed by Scanning Electron Microscopy (SEM) and EDS (Energy-Dispersive X-ray Spectroscopy). NBR referred to the higher values of heating, suggesting higher sliding friction. PTFE and PTFE with graphite showed lower heating, attributed to the delamination mechanism

Fontes e períodos de contato de fertilizantes e germinação de sementes de Brachiaria brizantha

A mistura de sementes forrageiras com fertilizantes pode viabilizar o cultivo consorciado, por diminuir a competição com a cultura produtora de grãos. No entanto, se realizada muito antes da semeadura, pode prejudicar a emergência e o estabelecimento das forrageiras. Realizou-se trabalho em condições de laboratório e casa de vegetação, em Botucatu (SP), com o objetivo de avaliar a germinação de sementes de Brachiaria brizantha em razão do tempo de mistura com fertilizantes químicos. O delineamento experimental empregado foi o inteiramente casualizado, com quatro repetições. Os tratamentos constaram de um fatorial 6 x 8, constituído de diferentes períodos de contato das sementes de Brachiaria brizantha cultivar Marandu (0, 6, 12, 24, 48 e 96 h) com os fertilizantes uréia, sulfato de amônio, cloreto de potássio, sulfato de potássio, superfosfato simples, superfosfato triplo e formulado N-P-K (8-28-16) nas formas de mistura de grânulos e farelado. Não houve relação entre os testes de germinação em laboratório e a emergência a campo. No solo, a emergência das plântulas de Brachiaria brizantha não é afetada se realizada a mistura com fertilizantes minerais fosfatados, cloreto de potássio e formulado farelado até 96 h antes da semeadura.

Tensão superficial dinâmica e ângulo de contato de soluções aquosas com surfatantes em superfícies artificiais e naturais

O trabalho objetivou avaliar o efeito de surfatantes em soluções aquosas sobre a tensão superficial dinâmica e ângulo de contato das gotas em diferentes superfícies: artificiais (lâmina de vidro e de óxido de alumínio) e naturais (superfícies adaxiais de folhas de Euphorbia heterophylla, Ipomoea grandifolia e Brachiaria plantaginea). Seis formulações de surfatantes (Antideriva®; Uno®; Pronto 3®; Li-700®; Supersil® e Silwet L-77®), respectivamente nas doses recomendadas do produto comercial (0,050; 0,025; 0,100; 0,250; 0,100 e 0,100 % v v-1) e o dobro delas, foram avaliadas em soluções aquosas. A tensão superficial dinâmica e o ângulo de contato formado sobre as superfícies naturais foram medidos por tensiômetro. Os ângulos de contato formados pelas gotas nas superfícies artificiais foram obtidos por análise de imagens capturadas por uma câmera digital. Os surfatantes influenciam nas propriedades físico-químicas de soluções aquosas. As soluções contendo os surfatantes Silwet L-77® e Supersil®; nas doses de 0,100 e 0,200% v v-1; proporcionaram maiores reduções na tensão superficial dinâmica e menores ângulos de contato das gotas sobre as superfícies artificiais e naturais. Os surfatantes organossiliconados em solução aquosa foram mais eficientes na redução da tensão superficial e proporcionaram maior molhamento de superfícies natural e artificial. em alvos naturais, essas propriedades obtidas com organossiliconados são dependentes das características de superfície das espécies vegetais.

Dessecação da aveia-preta (Avena strigosa Schreb) com herbicida de contato, em presença ou não de assistência de ar junto à barra do pulverizador, em diferentes volumes de calda

A tecnologia de aplicação dos produtos fitossanitários na agricultura pode ser aprimorada mediante a redução dos desperdícios. Com o objetivo de contribuir com tal avanço tecnológico, avaliou-se a eficácia de um herbicida com ação de contato, aplicado em pós-emergência com pulverizadores sem e com assistência de ar junto à barra, em diferentes volumes de calda. O experimento foi instalado no município de Ponta Grossa - PR, com a dessecação de aveia-preta (Avena strigosa Schreb) implantada em sistema de plantio direto sob a palha. Empregou-se a mistura herbicida formulada (SC) de dicloreto de paraquate (400 g ha-1) + diuron (200 g ha-1). O delineamento experimental utilizado foi o de blocos casualizados (DBC), em esquema fatorial 2 (pulverizador sem e com assistência de ar) x 5 (volumes de calda: 0; 100; 200; 300 e 400 L ha-1), com quatro repetições. A avaliação do efeito da dessecação se deu por meio da escala proposta pela Asociación Latinoamericana de Malezas (ALAM). A interação entre os fatores foi significativa, obtendo-se suficiência na dessecação a partir de 200 e 100 L ha-1, sem e com assistência de ar na barra, respectivamente.

Apropriação de novas mídias por estudantes universitárias

It is an investigation that seeks to reveal, record and analyze the process of appropriation and use of digital media by university students, aged between 40 and 60 years. Interested in studying how changes are perceived in the educational sphere for students Whois have gone through liberal/traditional school, ie, effected the first contact with technological devices media as adults, in the university. This investigation sought to contribute to the knowledge on the use of new learning strategies imposed by digital media by recording and analyzing the reports surveyed sample. Allowed to know the cultural universe of these women, revealing the context in which receive mediated messages and uses that maré these learning strategies within their daily academic life. Gathered in this work, reflexions guided by studies of media reception and role played by digital media as builders images and facilitators in knowledging acquisitions, it was chosen to work two main theorical notions: communication media and digital inclusion. As the research methodology, it was used the exploratory descriptive technical together with other appropriate tecniques. In ordem to approach the problem can be observed two phases: a quantitative one, which was used an investigative procedure, a survey data with closed questions; and a qualitative phase, which was used to collect data through a diary from situations encountered in the classroom. The main objective of analyzing how digital media are received, appropriated and used by university women has been fulfilled and it is remarkable that they access with dificulty and can not be considered included digitally. The results show that the problem of these agents is not the access, there are was of appropriation of digital media offered at IES, and it was possible to note that they seek to integrate to the technological world, and they even have devices that can insert them on this world. Insertion in cyberculture sets up the ability to find a favorable way to be aware of reality and production of knowledge and liberating and dignifying practices, in this case refers to an appropriation of citizenship through the field of technological devices offered as a perspective that they can interact

Estudo das propriedades críticas do processo de contato por par para diferentes atualizações

We study the critical behavior of the one-dimensional pair contact process (PCP), using the Monte Carlo method for several lattice sizes and three different updating: random, sequential and parallel. We also added a small modification to the model, called Monte Carlo com Ressucitamento" (MCR), which consists of resuscitating one particle when the order parameter goes to zero. This was done because it is difficult to accurately determine the critical point of the model, since the order parameter(particle pair density) rapidly goes to zero using the traditional approach. With the MCR, the order parameter becomes null in a softer way, allowing us to use finite-size scaling to determine the critical point and the critical exponents β, ν and z. Our results are consistent with the ones already found in literature for this model, showing that not only the process of resuscitating one particle does not change the critical behavior of the system, it also makes it easier to determine the critical point and critical exponents of the model. This extension to the Monte Carlo method has already been used in other contact process models, leading us to believe its usefulness to study several others non-equilibrium models

Estudos de modelos Estocásticos: processo de contato, séries aleatórias e processos difusivos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

A criança e a cidade: as transformações da infância numa Natal moderna

The first years of the twentieth century in Natal is characterized by several urban interventions that aim was to change the feature of the city basically rural to another that was in line with cities as models of modernity and civilization. In this case all individuals would have to play important social roles, which included men, women and especially children. It was in this atmosphere of bright future that the children were taken as key parts of an idealized society. Some processes were essential in triggering changes in natal s childhood, among them, operated within the families, that this historic moment in public life sought other possibilities of existence, the school education and the construction of which would be the model for urban education the School Groups, propagators of science as mediators of all knowledge, and finally, the medical interventions that disseminating health and hygiene practices has enabled not only the conservation of child life, but also the possibility of building their individuality in a body healthy. If these processes on the one hand tried to crystallize an ideal image of a child making a child identity directly linked to education and the "body hygiene" on the other, giving specific reflexive autonomy to children, providing them see the world through eyes of subject.

Jardim do Seridó: A construção dos espaços públicos na Veneza Seridoense nas primeiras décadas do século XX

As the space and the city are objects of desires, interests, seduction, sedition, appropriations, battles, victories, defeats, require to be analyzed historically. This research investigates and discusses the construction of public spaces in Jardim do Seridó City, backwoods of Rio Rio Grande do Norte, in the first decades of twentieth century, when the municipality was chaired by Heráclio Pires Fernandes, who ruled from 1917 to 1930 and was graduated from the University of Pharmacy of Recife, where he contacted the architectural, political and artistic influences circulating in the capital of Pernambuco. In the first decades of the twentieth century, the space of Jardim earns statements and practices, against the discourse of modernity, which sought to justify the title of Veneza Seridoense . At the time, the city had undergone several transformations in its public spaces through the construction of the Butchery, the Market, the Public Roads connecting the city to other urban centers, the building of the Bridge of the Pedra Lavrada Farm, the Elementary School Antônio de Azevedo , the creation of the Music Band Euterpe Jardinense , the Literary and Recreative Guild, the pavilion, the paving, tree planting, lighting, streets naming and listing of the annual painting of households, the arrival of automobiles, mail and telegraph. The construction of these new sceneries and the arrival of equipments generated impacts in the daily life of the population and were received differentiated ways by individuals involved in the process, which shows the tension between old and new, the relationship between history and space

Contato corporal entre adolescentes através da dança de salão na escola

The objective of this study was to identify the reaction and perception of adolescents in relation to body contact as well as emotional expressions through ballroom dancing. Forty-two adolescents from a public elementary school in the state of São Paulo participated in the study. Data gathering was conducted in groups by filming the ballroom dance class and applying a questionnaire about the experience. The dance experience was observed to provide greater body proximity and demonstration of affection, since part of the participants reported well-being, while others reported being embarrassed by dancing with a partner from the opposite sex. It was concluded that more dance activities related to biopsychosocial development need to be offered at school since ballroom dancing can help in interaction promoting body contact and thus facilitate in the process of interpersonal relations between adolescents.

O contato em um click: ser-com em um mundo supervirtualizado

O presente estudo tem como objetivo compreender os sentidos da experiência de jovens e adultos com a interação social virtual, partindo de suas narrativas. Inspiradas nas ideias de Martin Heidegger, especialmente em seu seminário A Questão da Técnica , refletiremos sobre os modos de ser-com, em tempos de tecnologia, internet, consumo e hipermodernidade, contexto deste estudo, onde as coisas são vivenciadas em seu extremo (hiperconsumo, hipercorpo, hipermercado, hipercartões). Neste cenário, a Internet e as Tecnologias de Informação e Comunicação estão mediando, cada vez mais o contato do homem com o mundo, reconfigurando a vida em sociedade. Diante disso, apresentamos A Era do Click , em que são possibilitados novos meios de estar com os outros. Este é um estudo qualitativo, baseado na fenomenologia de Heidegger, por ser favorecedora da compreensão dos sentidos da experiência em relação à questão problematizada. Como estratégias de pesquisa foram utilizadas sondagem de campo e entrevistas individuais, inspiradas nas narrativas de Walter Benjamin. Cinco colaboradores relataram suas experiências de ser-com no mundo virtual. A partir de seus relatos foi possível compreender que o espaço virtual se revela como mais um lócus, dentre tantos, no cotidiano do ser do homem, em que emergem diferentes modos de ser-com. Dependendo de sua abertura, a proximidade ou o distanciamento tornam-se relativos, do mesmo modo que o pessoal e o impessoal, o próprio e o impróprio. Além disso, tornou-se claro que, a virtualidade pode ajudar a lidar com a solidão e a angústia temporariamente, da mesma forma que pode tornar-se uma barreira para um contato mais aprofundado e autêntico com os outros. Os colaboradores demonstraram uma atitude de serenidade, um poder dizer sim e não simultaneamente à técnica moderna, além de uma postura de meditar sobre os modos como se conectam. Questionamos as implicações em longo prazo da virtualização do contato, estimulando novos estudos, sob a luz da fenomenologia heideggeriana

Análise comparativa na influência da técnica de moldagem funcional em arcos parcialmente edêntulos sobre os pontos de contato oclusais, a integridade da fibromucosa e a extensão da base da prótese

There is a lack of clinical studies evaluating techniques of functional impression for partially edentulous arches. The aim of this double-blind non-randomized controlled clinical trial was to compare the efficacy of altered cast impression (ACI) and direct functional impression (DFI) techniques. The efficacy was evaluated regarding the number of occlusal units on denture teeth, mucosa integrity at 24-hour follow-up and denture base extension. The sample included 51 patients (female and male) with mean age of 58.96 years treated at Dental Department of UFRN. The patients, exhibiting edentulous maxilla and mandibular Kennedy class I, were divided into two groups (group ACI, n=29; group DFI, n=22). Clinical evaluation was based on the number of occlusal units on natural and/or artificial teeth, mucosa integrity at 24-hour follow-up, and denture base extension. Statistical analysis was conducted using the software SPSS 17.0® (SPSS Inc., Chicago, Illinois). Student T-test was used to reveal association between number of occlusal units and impression technique while chi-square test showed association between mucosa integrity and impression technique. Fischer s exact test was applied for association between denture base extension and impression technique at 95% level of significance. No significant difference was observed between the groups regarding number of occlusal units, mucosa integrity and denture base extension. The altered cast technique did not provide significant improvement in comparison to the direct technique when the number of occlusal units, mucosa integrity and denture base extension

MARISA-MDD: uma abordagem para transformações entre modelos orientados a aspectos: dos requisitos ao projeto detalhado

Aspect Oriented approaches associated to different activities of the software development process are, in general, independent and their models and artifacts are not aligned and inserted in a coherent process. In the model driven development, the various models and the correspondence between them are rigorously specified. With the integration of aspect oriented software development (DSOA) and model driven development (MDD) it is possible to automatically propagate models from one activity to another, avoiding the loss of information and important decisions established in each activity. This work presents MARISA-MDD, a strategy based on models that integrate aspect-oriented requirements, architecture and detailed design, using the languages AOV-graph, AspectualACME and aSideML, respectively. MARISA-MDD defines, for each activity, representative models (and corresponding metamodels) and a number of transformations between the models of each language. These transformations have been specified and implemented in ATL (Atlas Definition Language), in the Eclipse environment. MARISA-MDD allows the automatic propagation between AOV-graph, AspectualACME, and aSideML models. To validate the proposed approach two case studies, the Health Watcher and the Mobile Media have been used in the MARISA-MDD environment for the automatic generation of AspectualACME and aSideML models, from the AOV-graph model

Dos requisitos à arquitetura em linhas de produtos de software: uma estratégia de transformações entre modelos

The tracking between models of the requirements and architecture activities is a strategy that aims to prevent loss of information, reducing the gap between these two initial activities of the software life cycle. In the context of Software Product Lines (SPL), it is important to have this support, which allows the correspondence between this two activities, with management of variability. In order to address this issue, this paper presents a process of bidirectional mapping, defining transformation rules between elements of a goaloriented requirements model (described in PL-AOVgraph) and elements of an architectural description (defined in PL-AspectualACME). These mapping rules are evaluated using a case study: the GingaForAll LPS. To automate this transformation, we developed the MaRiPLA tool (Mapping Requirements to Product Line Architecture), through MDD techniques (Modeldriven Development), including Atlas Transformation Language (ATL) with specification of Ecore metamodels jointly with Xtext , a DSL definition framework, and Acceleo, a code generation tool, in Eclipse environment. Finally, the generated models are evaluated based on quality attributes such as variability, derivability, reusability, correctness, traceability, completeness, evolvability and maintainability, extracted from the CAFÉ Quality Model