Avaliação do polimorfismo de fármacos utilizados para produção de medicamentos genéricos no Brasil

O polimorfismo é definido como a tendência de uma substância em se cristalizar em diferentes estados cristalinos. A presença de diversas formas cristalinas diferentes para um mesmo fármaco pode alterar algumas das propriedades físico-químicas da substância, dentre as quais a sua solubilidade, o que pode afetar diretamente o seu perfil de dissolução. O objetivo do trabalho foi revisar a literatura sobre os métodos de detecção de polimorfismo dos fármacos e avaliar diferentes amostras de carbamazepina disponíveis no Brasil visando identificar a presença de diferente polimorfos. A carbamazepina apresentou indícios de polimorfismo no DSC para algumas das cinco amostras, o que não foi confirmado pelos demais métodos empregados (IV e raio-X). Após os testes de dissolução, os perfis foram comparados com a amostra de referência e apenas uma das amostras apresentou perfil de dissolução semelhante quando comparado ao padrão através do cálculo de f1 e f2. Os resultados observados na etapa prática sinalizam que se faz necessário o desenvolvimento e aprofundamento do assunto junto à Anvisa com vistas à preservação da segurança dos medicamentos dos medicamentos genéricos comercializados no País.

Gravimetria

Partes da aula:Parte 1 - Gravimetria Parte 2 - Volumetria de Precipitação Parte 3 - Vantagem da Gravimetria Parte 4 - Fator gravimétrico Parte 5 - Estequiometria e formas do analíto Parte 6 - Fatores que afetam a solubilidade

Ação Sacietogênica de um inibidor de tripsina da semente de tamarindo (Tamarindus indica L.)

The seeds are excellent sources of proteinase inhibitors and have been highlighted owing to various applications. Among these applications are those in effect on food intake and weight gain that stand out because of the increasing number of obese individuals. This study evaluated the effects of trypsin inhibitor present in the seed of tamarind (Tamarindus indica L.) reduction in weight gain, biochemical and morphological alterations in Wistar rats. For this, we partially purified a trypsin inhibitor tamarind seed. This inhibitor, ITT2 at a concentration of 25 mg / kg body weight, over a period of 14 days was able to reduce food intake in rats (n = 6) by approximately 47%, causing a reduction in weight gain approximately 70% when compared with the control group. With the evaluation of the in vivo digestibility was demonstrated that the animals lost weight due to satiety, presented by the reduction of food intake, since there were significant differences between true digestibility for the control group (90.7%) and the group treated with inhibitor (89.88%). Additionally, we checked the deeds of ITT2 on biochemical parameters (glucose, triglycerides, total cholesterol, high-density lipoprotein, low-density lipoprotein, glutamic-pyruvic transaminase, glutamic oxaloacetic transaminase, gamma glutamyl transferase albumin, globulin, total protein and C-reactive protein) and these, when assessed in the study groups showed no statistically significant variations. We also evaluate the histology of some organs, liver, stomach, intestine, and pancreas, and showed no changes. And to evaluate the effect of trypsin inhibitor on food intake due to the satiety is regulated by cholecystokinin (CCK) were measured plasma levels, and it was observed that the levels of CCK in animals receiving ITT2 were significantly higher ( 20 + 1.22) than in animals receiving only solution with casein (10.14 + 2.9) or water (5.92 + 1.15). Thus, the results indicate that the effect caused ITT2 satiety, reducing food intake, which in turn caused a reduction in weight gain in animals without causing morphological and biochemical changes, this effect caused by the elevation of plasma levels CCK

Vicilina de sementes da leguminosa selvagem Anadenanthera macrocarpa (AmV): purificação, caracterização, efeito deletério e mecanismo de ação para bruquídeo callosobruchus maculatus

Grains and legume seeds are foods that form the basis of the diets of many cultures around the world, winch contritbute to the daily nutrient requirements of humans. Vicilins (7S globulin) are storage proteins found in legume seeds, and may have an additional function constitutive defense of the embryo against pests and pathogens. In this work the vicilin from Anadenanthera macrocarpa - AmV (red-angico), was purified and partially characterized, its effect on development and larval survival and adult emergence of Callosobruchus maculatus was evaluated by determination of LD50, WD50 and ED50 in system bioassay. Purification of vicilin was initiated by the chitin affinity chromatography and then gel filtration (Superdex 75 Tricorn 10x300 mm) FPLC system followed by reverse phase chromatography (C8 phenomenex) on HPLC system. Bioassays WD50 and LD50 for larvae were 0.32% and 0.33% (w:w) respectively, since the ED50 for adults was 0.096%. The probable mechanism of action was evaluated by testing digestibility of AmV in vitro, and observed for the involvement of two fragments vicilins immunoreactive against polyclonal Anti-vicilin from Erythrina velutina (Anti-EvV) about of 22 and 13 kDa chitin binding. The AmV in its native form has been recognized by the anti-EvV, indicating that there is a conserved region in the vicilin and is probably corresponding to the chitin binding domains. These results point to a new vicilin chitin binding that can subsequently be used as a possible biopesticide protein source, in order to control insect pest C. maculatus and confirm literature findings that demonstrate vicilin in the presence of different kinds of ligands to conserved regions chitin not yet characterized

Estudo da moagem de alta energia e sinterização de pós compósitos W-Cu

The Tungsten/copper composites are commonly used for electrical and thermal objectives like heat sinks and lectrical conductors, propitiating an excellent thermal and electrical conductivity. These properties are dependents of the composition, crystallite size and production process. The high energy milling of the powder of W-Cu produces an dispersion high and homogenization levels with crystallite size of W very small in the ductile Cu phase. This work discusses the effect of the HEM in preparation of the W-25Cu composite powders. Three techniques of powder preparation were utilized: milling the dry with powder of thick Cu, milling the dry with powder of fine Cu and milling the wet with powder of thick Cu. The form, size and composition of the particles of the powders milled were observed by scanning electron microscopy (SEM). The X-ray diffraction (XRD) was used to analyse the phases, lattice parameters, size and microstrain of the crystallite. The analyse of the crystalline structure of the W-25Cu powders milled made by Rietveld Method suggests the partial solid solubility of the constituent elements of the Cu in lattice of the W. This analyse shows too that the HEM produces the reduction high on the crystallite size and the increase in the lattice strain of both phases, this is more intense in the phase W

Caracterização de compósitos Nb-20%cu obtidos por moagem de alta energia e sinterizados por fase líquida

In this work, was studied the formation of a composite of the refractory metal niobium with copper, through the process of high-energy milling and liquid phase sintering. The HEM can be used to synthesize composite powders with high homogeneity and fine size particle distribution. It may also produce the solid solubility in immiscible systems such as Nb-Cu, or extend the solubility of systems with limited solubility. Therefore, in the immiscible system Cu-Nb, the high-energy milling was successfully used to obtain the composite powder particles. Initially, the formation of composite particles during the HEM and the effect of preparation technique on the microstructure of the material was evaluated. Four loads of Nb and Cu powders containing 20%wt Cu were synthesized by MAE in a planetary type ball mill under different periods of grinding. The influence of grinding time on the metal particles is evaluated during the process by the withdrawal of samples at intermediate times of milling. After compaction under different forces, the samples were sintered in a vacuum furnace. The liquid phase sintering of these samples prepared by HEM produced a homogeneous and fine grained. The composite particles forming the sintered samples are the addition of a hard phase (Nb) with a high melting point, and a ductile phase (Cu) with low melting point and high thermal and electrical conductivities. Based on these properties, the Nb-Cu system is a potential material for many applications, such as electrical contacts, welding electrodes, coils for generating high magnetic fields, heat sinks and microwave absorbers, which are coupled to electronic devices. The characterization techniques used in this study, were laser granulometry, used to evaluate the homogeneity and particle size, and the X-ray diffraction, in the phase identification and to analyze the crystalline structure of the powders during milling. The morphology and dispersion of the phases in the composite powder particles, as well the microstructures of the sintered samples, were observed by scanning electron microscopy (SEM). Subsequently, the sintered samples are evaluated for density and densification. And finally, they were characterized by techniques of measuring the electrical conductivity and microhardness, whose properties are analyzed as a function of the parameters for obtaining the composite

Novos monômeros obtidos a partir do metacrilato de glicidila, bisfenol A e 4, 4 isopropilidenodicicloexanol : síntese, caracterização estrutural e propriedades de compósitos para utilização em resinas de restauração dental

Nowadays, composite resins are the direct restorative materials more important in dental clinical performance, due to their versatility and aesthetic excellence. Bis-GMA (2,2-bis[4(2-hydroxy-3-metacryloxypropoxy)phenil]propane) is the base monomer more frequently used in restorative composite resins. However, this monomer presents some disadvantages, such as high viscosity and two aromatic rings in its structure that can promote allergic reactions to the humans. In this work, the main purpose was to synthesize new monomers from glycidyl methacrylate to use in dental restorative materials. Structural characterization of the monomers was carried out through FTIR and NMR 1H, and eight composites were produced from the new monomers, by addition of silane-treated alumino silicate particles (inorganic filler) and a photocuring system (camphorquinone and ethyl 4-dimethylaminebenzoate). The composites were analyzed by environmental scanning electronic microscopy and the water sorption and solubility, compressive strength and elastic modulus were determined. A commercial composite resin [Z100 (3M)] was used to comparison effect. The new composites presented general characteristics similar to the commercial ones; however, they didn t present the properties expected. This behavior was attributed to the lower degree of monomer reaction and to the granulometry and size distribution of the mineral filler in the polymeric matrix

Análise comparativa entre simuladores de linha de fluxo e diferenças finitas para um reservatório de petróleo submetido a injeção de água

Water injection is the most widely used method for supplementary recovery in many oil fields due to various reasons, like the fact that water is an effective displacing agent of low viscosity oils, the water injection projects are relatively simple to establish and the water availability at a relatively low cost. For design of water injection projects is necessary to do reservoir studies in order to define the various parameters needed to increase the effectiveness of the method. For this kind of study can be used several mathematical models classified into two general categories: analytical or numerical. The present work aims to do a comparative analysis between the results presented by flow lines simulator and conventional finite differences simulator; both types of simulators are based on numerical methods designed to model light oil reservoirs subjected to water injection. Therefore, it was defined two reservoir models: the first one was a heterogeneous model whose petrophysical properties vary along the reservoir and the other one was created using average petrophysical properties obtained from the first model. Comparisons were done considering that the results of these two models were always in the same operational conditions. Then some rock and fluid parameters have been changed in both models and again the results were compared. From the factorial design, that was done to study the sensitivity analysis of reservoir parameters, a few cases were chosen to study the role of water injection rate and the vertical position of wells perforations in production forecast. It was observed that the results from the two simulators are quite similar in most of the cases; differences were found only in those cases where there was an increase in gas solubility ratio of the model. Thus, it was concluded that in flow simulation of reservoirs analogous of those now studied, mainly when the gas solubility ratio is low, the conventional finite differences simulator may be replaced by flow lines simulator the production forecast is compatible but the computational processing time is lower.

Extração de metais (K, Mg, Ba, Ca, Cr, Mn, Li, Fe) de água produzida utilizando sistema microemulsionado

The produced water is a byproduct formed due to production of petroleum and carries with it a high amount of contaminants such as oil particles in suspension, organic compounds and metals. Thus, these latter pollutants are very difficult to treat because of its high solubility in water. The objective of this work is to use and evaluate a microemulsioned system to remove metals ( K , Mg , Ba , Ca , Cr , Mn , Li , Fe ) of synthetic produced water. For the extraction of metals, it was used a pseudoternary diagram containing the following phases: synthetic produced water as the aqueous phase (AP), hexane as organic phase (OP), and a cosurfactant/surfactant ratio equal to four (C/S = 4) as the third phase, where the OCS (saponified coconut oil) was used as surfactant and n-butanol as cosurfactant. The synthetic produced water was prepared in a bench scale and the region of interest in the diagram for the removal of metals was determined by experimental design called. Ten points located in the phase Winsor II were selected in an area with a large amount of water and small amounts of reagents. The samples were analyzed in atomic absorption spectrometer, and the results were evaluated through a statistical assesment, allowing the efficiency analysis of the effects and their interactions. The results showed percentages of extraction above 90% for the metals manganese, iron, chromium, calcium, barium and magnesium, and around 45% for metals lithium and potassium. The optimal point for the simultaneous removal of metals was calculated using statistical artifact multiple response function (MR). This calculation showed that the point of greatest extraction of metals occurs was the J point, with the composition [72% AP, 9% OP, 19% C/S], obtaining a global extraction percentage about 80%. Considering the aspects analyzed, the microemulsioned system has shown itself to be an effective alternative in the extraction of metals on synthetic produced water remediation

Nanotechnological delivery systems for the oral administration of active molecules: Polymeric microparticles and microemulsions applied to anti-inflammatory and anti-infectious drugs

This thesis was devoted to the development of innovative oral delivery systems for two different molecules. In the first part, microparticles (MPs) based on xylan and Eudragit® S- 100 were produced and used to encapsulate 5-aminosalicylic acid for colon delivery. Xylan was extracted from corn cobs and characterized in terms of its physicochemical, rheological and toxicological properties. The polymeric MPs were prepared by interfacial cross-linking polymerization and spray-drying and characterized for their morphology, mean size and distribution, thermal stability, crystallinity, entrapment efficiency and in vitro drug release. MPs with suitable physical characteristics and satisfactory yields were prepared by both methods, although the spray-dried systems showed higher thermal stability. In general, spraydried MPs would be preferable systems due to their thermal stability and absence of toxic agents used in their preparation. However, drug loading and release need to be optimized. In the second part of this thesis, oil-in-water microemulsions (O/W MEs) based on mediumchain triglycerides were formulated as drug carriers and solubility enhancers for amphotericin B (AmB). Phase diagrams were constructed using surfactant blends with hydrophiliclipophilic balance values between 9.7 and 14.4. The drug-free and drug-loaded MEs presented spherical non-aggregated droplets around 80 and 120 nm, respectively, and a low polydispersity index. The incorporation of AmB was high and depended on the volume fraction of the disperse phase. These MEs did not reduce the viability of J774.A1 macrophage-like cells for concentrations up to 25 μg/mL of AmB. Therefore, O/W MEs based on propylene glycol esters of caprylic acid may be considered as suitable delivery systems for AmB

Câncer do colo uterino: rastreamento, marcador biológico e polimorfismo genético

Existem fortes evidências de que os programas de rastreamento baseados em citologia resultaram em diminuição significativa da incidência e mortalidade por câncer do colo do útero, no entanto, um excesso substancial de tratamento de lesões intraepiteliais de baixo grau que dificilmente progrediriam para carcinoma cervical resulta da baixa especificidade do tradicional rastreio citológico. A detecção precoce das lesões através do rastreamento citológico e a avaliação do grau histológico em espécimes cervicais são fundamentais, entretanto não permitem identificar quais pacientes terão maior probabilidade de progressão para lesões de alto grau e carcinoma invasivo. A busca de potenciais marcadores de prognóstico; objetivando o entendimento da progressão das lesões intraepiteliais é de suma importância. Acredita-se que fatores imunoregulatórios, imunogenéticos e proteínas do ciclo celular estejam intimamente envolvidos no processo de carcinogênese. Considerando o exposto, a proposta do projeto foi inicialmente avaliar a eficácia da citologia oncológica no rastreamento do câncer cervical, foi investigado ainda o polimorfismo do gene do fator de transcrição FOXP3 e a expressão da proteína do ciclo celular P63 (P63) associados respectivamente a diagnóstico e prognóstico das lesões cervicais. Em um primeiro momento foi realizado estudo transversal que envolveu 3194 mulheres. As participantes foram submetidas à citologia e biópsia de colo dirigida por colposcopia e os resultados foram comparados para verificar-se a acurácia do teste de Papanicolaou na detecção de lesões intraepiteliais e câncer cervical. Posteriormente, realizou-se estudo comparativo do tipo observacional estratificado em três grupos: Grupo 1: 16 casos com diagnóstico histopatológico de metaplasia/cervicite, considerados normais, Grupo 2: 11 casos com lesão de baixo grau (LSIL) e Grupo 3: 15 casos com lesão de alto grau (HSIL) ou carcinoma epidermoide de colo. Um total de 42 participantes respondeu a um questionário epidemiológico padronizado sobre as características demográficas, hábitos pregressos, história reprodutiva e de comportamento sexual. Após exame colposcópico, foram coletados fragmentos de espécimes cervicais para a pesquisa da expressão proteica da P63 por imunohistoquímica. Amostras de sangue periférico foram coletadas para extração do DNA e detecção do polimorfismo do gene FOXP3. No primeiro estudo em que se avaliou a acurácia do teste de Papanicolaou, encontrou-se sensibilidade de 0,83, valor preditivo positivo (VPP) de 0,77 e especificidade de 0,23 no rastreamento das lesões cervicais e câncer de colo. viii Melhores resultados foram observados quando se avaliou a acurácia diagnóstica para lesões de alto grau e carcinoma com VPP de 0,99 e especificidade de 0,84.No estudo subsequente onde se comparou a expressão da proteína P63 observou-se maior número de núcleos marcados no grupo com lesões intraepiteliais de alto grau e câncer quando comparado ao grupo com biópsias negativas (p=0,0004). No último estudo pesquisou-se a associação do polimorfismo do gene FOXP3 com lesões intraepiteliais cervicais sendo evidenciada maior prevalência do genótipo heterozigoto, CT, no grupo com lesões de colo na histopatologia (p=0,027). Mulheres com lesões intraepiteliais de baixo ou alto grau e câncer de colo de útero apresentam maior expressão da proteína P63 e maior prevalência de genótipo heterozigoto do gene FOXP3 em comparação com as sem lesões cervicais. A associação da pesquisa da expressão da proteína e do polimorfismo do gene pode tornar os exames utilizados atualmente para a avaliação diagnóstica e prognóstica das lesões de colo uterino mais efetivos em detectar quais as mulheres com maior risco para progressão para câncer

Desempenho zootécnico de girinos de rã-touro com diferentes níveis de proteína e energia digestíveis

A partir dos valores de digestibilidade de alguns ingredientes foram propostas dietas, com diferentes níveis de proteína e energia digestíveis, em esquema fatorial 3 x 3, destinadas a girinos de rã-touro para avaliar o desempenho zootécnico. O experimento, com duração de 60 dias, foi conduzido com 810 girinos, oriundos da mesma desova, distribuídos em 27 caixas de polipropileno, em uma densidade de 1girino/L. O delineamento experimental foi um esquema fatorial com três níveis de proteína digestível (27; 31 e 35%) e três níveis de energia digestível (2.700; 2.800 e 2.900kcal/kg) com três réplicas. Os parâmetros avaliados aos 60 dias foram ganho de peso, consumo da dieta, consumo em proteína da dieta, conversão alimentar, taxa de eficiência proteica e índice de sobrevivência. Os resultados foram submetidos à análise de variância e ao teste de Duncan (95% de precisão). Os resultados encontrados não apresentaram interação entre proteína e energia digestível para nenhum parâmetro avaliado. em relação à proteína digestível, foram verificadas diferenças nos parâmetros consumo em proteína da dieta e taxa de eficiência proteica (TEP), o que demonstra ineficiência das dietas com altos valores proteicos. Deve-se oferecer aos girinos de rã-touro dietas com 27% de proteína digestível, por apresentarem melhor resultado para taxa de eficiência proteica e para consumo em proteína da dieta.

Obtenção de sistemas multiparticulados de isoniazida revestidos com polímero de liberação entérica

Known for thousands of years, tuberculosis (TB) is the leading cause of mortality by a single infectious disease due to lack of patient adherence to available treatment regimens, the rising of multidrug resistant strains of TB (MDR-TB) and co-infection with HIV virus. Isoniazid and rifampicin are the most powerful bactericidal agents against M. tuberculosis. Because of that, this couple of drugs becomes unanimity in anti-TB treatment around the world. However, the rifampicin in acidic conditions in the stomach can be degraded rapidly, especially in the presence of isoniazid, which reduces the amount of available drug for absorption, as well as its bioavailability, contributing to the growing resistance to tuberculostatic drugs. Rifampicin is well absorbed in the stomach because of its high solubility between pH 1 and 2 and the gastric absorption of isoniazid is considered poor, therefore it is mostly intestinal. This work has as objective the development of gastro-resistant multiple-systems (granules and pellets) of isoniazid aiming to prevent the contact with rifampicin, with consequent degradation in acid stomach and modulate the release of isoniazid in the intestine. Granules of isoniazid were obtained by wet method using both alcoholic and aqueous solutions of PVP K-30 as aggregating and binder agent, at proportions of 5, 8 and 10%. The influence of the excipients (starch, cellulose or filler default) on the physical and technological properties of the granules was investigated. The pellets were produced by extrusionesferonization technique using isoniazid and microcrystalline cellulose MC 101 (at the proportion of 85:15) and aqueous solution of 1% Methocel as platelet. The pellets presented advantages over granular, such as: higher apparent density, smaller difference between apparent and compaction densities, smoother surface and, especially, smaller friability, and then were coated with an organic solution of Acrycoat L 100 ® in a fluidized bed. Different percentages of coating (15, 25 and 50%) were applied to the pellets which had their behavior evaluated in vitro by dissolution in acidic and basic medium. Rifampicin dissolution in the presence of uncoated and coated isoniazid pellets was evaluated too. The results indicate that the gastro resistance was only achieved with the greatest amount of coating and isoniazid is released successfully in basic step. The amount of rifampicin in the dissolution medium when the isoniazid pellets were not coated was lower than in the presence of enteric release pellets. Therefore, the polymer Acrycoat L 100 ® was efficient for coating with gastro-resistant function and can solve the problem of low bioavailability of rifampicin and help to reduce its dosage

Changes in physical properties of extruded sour cassava starch and quinoa flour blend snacks

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção de snacks funcionais à base de farinha de soja e polvilho azedo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)