999 resultados para Procedimentos sintéticos
Resumo:
Actually, surveys have been developed for obtaining new materials and methodologies that aim to minimize environmental problems due to discharges of industrial effluents contaminated with heavy metals. The adsorption has been used as an alternative technology effectively, economically viable and potentially important for the reduction of metals, especially when using natural adsorbents such as certain types of clay. Chitosan, a polymer of natural origin, present in the shells of crustaceans and insects, has also been used for this purpose. Among the clays, vermiculite is distinguished by its good ion exchange capacity and in its expanded form enhances its properties by greatly increasing its specific surface. This study aimed to evaluate the functionality of the hybrid material obtained through the modification of expanded vermiculite with chitosan in the removal of lead ions (II) in aqueous solution. The material was characterized by infrared spectroscopy (IR) in order to evaluate the efficiency of modification of matrix, the vermiculite, the organic material, chitosan. The thermal stability of the material and the ratio clay / polymer was evaluated by thermogravimetry. To evaluate the surface of the material was used in scanning electron microscopy (SEM) and (BET). The BET analysis revealed a significant increase in surface area of vermiculite that after interaction with chitosan, was obtained a value of 21, 6156 m2 / g. Adsorption tests were performed according to the particle size, concentration and time. The results show that the capacity of removal of ions through the vermiculite was on average 88.4% for lead in concentrations ranging from 20-200 mg / L and 64.2% in the concentration range of 1000 mg / L. Regarding the particle size, there was an increase in adsorption with decreasing particle size. In fuction to the time of contact, was observed adsorption equilibrium in 60 minutes with adsorption capacity. The data of the isotherms were fitted to equation Freundlich. The kinetic study of adsorption showed that the pseudo second- order model best describes the adsorption adsorption, having been found following values K2=0,024 g. mg-1 min-1and Qmax=25,75 mg/g, value very close to the calculated Qe = 26.31 mg / g. From the results we can conclude that the material can be used in wastewater treatment systems as a source of metal ions adsorbent due to its high adsorption capacity
Resumo:
This work depicts a study of the adsorption of carbon dioxide on zeolite 13X. The activities were divided into four stages: study batch adsorption capacity of the adsorbent with synthetic CO2 (4%), fixed bed dynamic evaluation with the commercial mixture of gases (4% CO2, 1.11% CO, 1 2% H2, 0.233% CH4, 0.1% C3, 0.0233% C4 argon as inert closing balance), fixed bed dynamic modeling and evaluation of the breakthrough curve of CO2 originated from the pyrolysis of sewage sludge. The sewage sludge and the adsorbent were characterized by analysis TG / DTA, SEM, XRF and BET. Adsorption studies were carried out under the following operating conditions: temperature 40 °C (for the pyrolysis of the sludge T = 600 °C), pressures of 0.55 to 5.05 bar (batch process), flow rate of the gaseous mixture between 50 - 72 ml/min and the adsorbent masses of 10, 15 and 20 g (fixed bed process). The time for the adsorption batch was 7 h and on the fixed bed was around 180 min. The results of this study showed that in batch adsorption process step with zeolite 13X is efficient and the mass of adsorbed CO2 increases with the increases pressure, decreases with temperature increases and rises due the increase of activation temperature adsorbent. In the batch process were evaluated the breakthrough curves, which were compared with adsorption isotherms represented by the models of Langmuir, Freündlich and Toth. All models well adjusted to the experimental points, but the Langmuir model was chosen in view of its use in the dynamic model does not have implications for adsorption (indeterminacy and larger number of parameters such as occurred with others) in solving the equation. In the fixed bed dynamic study with the synthetic gas mixture, 20 g of mass adsorbent showed the maximum adsorption percentage 46.7% at 40 °C temperature and 50 mL/min of flow rate. The model was satisfactorily fitted to the three breakthrough curves and the parameters were: axial dispersion coefficient (0.0165 dm2/min), effective diffusivity inside the particle (dm2/min 0.0884) and external transfer coefficient mass (0.45 dm/min). The breakthrough curve for CO2 in the process of pyrolysis of the sludge showed a fast saturation with traces of aerosols presents in the gas phase into the fixed bed under the reaction process
Resumo:
The development of research that aim to reduce or even eliminate the environmental impacts provided by anthropogenic actions. One of these main action is the discard of industrial waste in the biotic compartments such as soil, water and air, gained more space in academic settings and in private. A technique of phytoremediation involving the use of plants (trees, shrubs, creepers and aquatic) and their associated microorganisms in order to remove, degrade or isolate toxic substances to the environment. This study aimed to evaluate the potential for phytoremediation of castor bean (Ricinus communis L.) and sunflower (Helianthus annuus L.), wild crops suitable region of Rio Grande do Norte, to reduce concentrations of lead and toluene present in synthetic wastewater that simulate the characteristics of treated water production originated in the petrochemical Guamaré. The experiment was accomplished in randomized blocks in four replicates. Seeds of BRS Energy for the development of seedlings of castor beans and sunflower for Catissol 01, both provided by EMPARN (Empresa de Pesquisa Agropecuária do Rio Grande do Norte) were used. Lead concentrations tested were 250, 500 and 1000 mg/L called T2, T3 and T4, respectively, for toluene the concentrations used were 125, 256 and 501 μg/L, called T5, T6 and T7, respectively. The data for removal of lead in relation to sewage systems applied in castor bean and sunflower were 43.89 and 51.85% (T2), 73.60 and 73.74% (T3) and 85.66 and 87.80 % (T4), respectively, and toluene were approximately 52.12 and 25.54% (T5), 55.10 and 58.05% (T6) and 79.77 and 74.76% (T7) for castor and sunflower seeds, respectively. From the data obtained, it can be deduce that mechanisms involved in reducing the contaminants were of phytoextraction, in relation to lead and phytodegradation for toluene. However, it can be concluded that the castor bean and sunflower crops can be used in exhaust after-treatment of industrial effluents that have this type of contaminant
Resumo:
The current research had as main objective to analyze the possibility of knowledge elaboration/re-elaboration about ideas and algorithmic procedures related to basic operations by pupils of the 6th degree fundamental teaching in a significant learning process. This way the study had as basis a methodological intervention developed in a 6th degree class of a Fundamental Teaching Municipal School in the city of João Pessoa, PB. The research had as central steps the application of pre-tests (1 and 2); the execution of semi-structured interviews with the pupils involved in the theme deep studies; the elaboration and development of teaching activities, having as referential the significant learning and the application of a pre-test. The data collected in the pre-tests (1 and 2) showed a low level of the pupils comprehension about the contents related to the four operations. The answers to the post-test questions were analyzed mainly from the qualitative point of view based on the mathematic concepts comprehension theory proposed by Skemp (1980) having as complementary subsidy data collected through interviews. The analysis of the results obtained in the post-test showed that the major part of pupils reached a relational comprehension about the ideas and algorithmic procedures related to addition, subtraction, multiplication, and division. Such results showed us that the application of a teaching methodology that privileges the content comprehension, considering the pupils previous knowledge and the reflection about the action along the activities proposed, made possible the elaboration or re-elaboration of knowledge by pupils regarding to contents adopted as theme for our research
Resumo:
This study is part of interactional perspective, focusing on Conversation Analysis theories, from the Textual Interactive Perspective and Text Linguistics . This research, from its guiding questions, aims at understanding the interaction between teacher and students in the process of the knowledge construction as well as at describing, analyzing and understanding aspects of topical organization speech in the classroom in elementary school, observing the opening and closing procedures of the speech topics in that particular space. Considering that the procedures for opening and closing of discursive topics occur through language marks, we tried to identify which speech marks are used in the opening and closing of the topics studied in the classroom, in interaction during the collaborative process of the discourse established between teacher and students. Therefore, this study is based on authors who analyze specific questions of the text in real context of language use: Koch (1993, 1999), Jubran et al (1991), Jubran (2006), Pine (2005), Penhavel (2010), Galembeck (2012), Barros (1991), Marcuschi (1986 , 1990, 1991 , 1998 , 1999, 2003 , 2004a), Kerbrat - Orecchioni (2006), Favero (1999, 2002) and Galvão (2004, 2010). As a methodology of investigation, the study is focused on the postulates of ethnographic research in order to carry out data collection, through audio and video recordings which were transcribed, according to the NURC project proposal, with some adaptations. Data analysis showed that the procedures for opening and closing of the speech topics occurred by the use of discourse markers, in particular the marker "then", allowing us to understand that these elements are important in the topical organization speech, contributing to ensure textual cohesion and coherence. We conclude that the organization of the discursive topic in the classroom occurs through events that support the explicitness of the content of teaching and learning, considering the diverse necessity of an institutional academic plan, whose main objective is the construction of knowledge
Resumo:
Recently, we can perceive an intensification of assignments developed into Mathematical Education with the use of oral history as a research methodology. In this article, facing the living experiences during the preparation of our Phd tasks and later, when we had the role of advisors of scientific papers and of Postgraduate students in their researches also using the same methodology, we discussed the implication of ethics, mathematical education and oral history. Furthermore, we enunciated possibilities of the posture of the researcher before interviews, texts and iconography - photos and several images-provided by collaborators of our projects on Oral history and Mathematical Education.
Resumo:
The stress responses can be parameters used in order to identify the welfare of animals. Behavior parameters can also be regarded as means to identify their relation to stressing situations. In this study, adult male and female poodle dogs, accustomed (group 1) or not (group 2) to the environment of a bath and grooming salon were analyzed through the plasmatic concentration of cortisol, cell counting of the immune system (total leukocytes and percentage of neutrophils and lymphocytes) and through observation of changes in behavior before and after the bath and grooming service. After arriving at the kennel, the dogs were taken to the bath and grooming facility, where they had their blood samples taken and were observed for ten minutes. The subsequent procedures consisted of the bath and grooming services and the collection of another blood samples. The research results were analyzed through non-parametric statistic tests and p < 0.05. Accustomed and non-accustomed dogs presented different hormonal and behavior responses: accustomed dogs presented an increasing of the cortisol level at the second blood samples collection, thus indicating stress towards the aforementioned procedures and presenting behavior responses which can be described as moderated stress. Non-accustomed dogs presented the same cortisol levels in both first and second samples suggesting that they were already reacting to the new environment. Dogs also shown behavioral responses which can be described as acute stress. Both male and female dogs showed similar immunological changes as well as different endocrine and behavioral profiles. Concerning aggression, this study demonstrates that biting the owner can be a predicting behavior of aggression during the bath and grooming service, male dogs were more aggressive than the female, and that males were more reactive to unknown caretaker. The results of this research propose that the familiarization of the animal with the bath and grooming environment and caretaker is important to the welfare of poodle dogs, especially to that of male dogs
Resumo:
In this work, the treatment of synthetic wastewaters containing Remazol Red BR (RRB) and Novacron Blue C-D (NB) by anodic oxidation using boron doped diamond anodes (BDD) and Novacron Yellow (YN) using BDD and Platinum (Pt) anodes was investigated. Galvanostatic electrolyses of RRB and NB synthetic wastewaters have led to the complete decolorization removal at different operating conditions (current density, pH and temperature). The influence of these parameters was investigated in order to find the best conditions for dyestuff colour removal. According to the experimental results obtained, the electrochemical oxidation process is suitable for decolorizing wastewaters containing these textile dyes, due to the electrocatalytic properties of BDD and Pt anode. Energy requirements for removing colour during galvanostatic electrolyses of RRB, NB and YN synthetic solutions depends mainly on the operating conditions; for example for RRB, it passes from 3.30 kWh m-3 at 20 mA cm-2 to 4.28 kWh m-3 at 60 mA cm-2 (pH = 1); 15.23 kWh m-3 at 20 mA cm-2 to 24.75 kWh m-3 at 60 mA cm-2 (pH = 4.5); 10.80 kWh m-3 at 20 mA cm-2 to 31.5 kWh m-3 at 60 mA cm-2 (pH = 8) (data estimated per volume of treated effluent). In order to verify the Brazilian law regulations of NB and RRB synthetic solutions after electrochemical decolourisation treatment, Hazen Units values were determined and the total colour removal was achieved; remaining into the regulations. Finally, electrical energy cost for removing colour was estimated
Resumo:
In this work, electrochemical technology was used to treat synthetic wastewater containing Methyl Red (MR) and Blue Novacron (BN) by anodic oxidation using anodes platinum (Pt) and real samples of textile effluents using DDB anodes and platinum (Pt). The removal of color from the galvanostatic electrolysis of synthetic wastewater MR and BN, and the actual sample has been observed under different conditions (different current densities and temperature variation). The investigation of these parameters was performed in order to establish the best conditions for removal of color and chemical oxygen demand (BOD). According to the results obtained in this study, the electrochemical oxidation processes suitable for the degradation process of color and COD in wastewater containing such textile dyes, because the electrocatalytic properties of Pt and BDD anodes consumption energy during the electrochemical oxidation of synthetic solutions AN and MR and real sample, mainly depend on the operating parameters of operation, for example, the synthetic sample of MR, energy consumption rose from 42,00kWhm-3 in 40 mAcm-2 and 25 C to 17,50 kWhm-3 in 40mAcm-2 and 40 C, from the BN went 17,83 kWhm-3 in 40mAcm and 40°C to 14,04 kWhm- 3 in 40mAcm-2 and 40 C (data estimated by the volume of treated effluent). These results clearly indicate the applicability of electrochemical treatment for removing dyes from synthetic solutions and real industrial effluents
Resumo:
A política de indexação deve ser constituída de estratégias que permitam o alcance dos objetivos de recuperação do sistema de informação. O indexador tem a função primordial de compreender o documento ao realizar uma análise conceitual que represente adequadamente seu conteúdo. Utilizando a leitura como evento social/protocolo verbal em grupo, nosso objetivo é contribuir com a literatura sobre política de indexação e apresentar propostas de ensino de política de indexação direcionadas a alunos de graduação e pós-graduação, além de uma experiência de educação à distância com vistas à formação do bibliotecário em serviço. Os resultados obtidos demonstraram que a metodologia pode ser utilizada por sistemas de informação para que se tenha acesso ao conhecimento do indexador. Conclui que o indexador deve ser o alvo de investimento dos sistemas de informação e sugere aos sistemas de informação que a experiência do indexador também seja utilizada como parâmetro para política de indexação.
Resumo:
OBJETIVO: Discutir os aspectos das urgências odontológicas relacionadas aos traumatismos dentários, disponibilizando mais informações para médicos pediatras ou plantonistas de serviços de atendimento de urgências e emergências. FONTES DE DADOS: O levantamento dos dados foi realizado na base de dados Pubmed e Bireme, selecionando os artigos dos últimos 13 anos. As palavras-chave utilizadas foram: traumatismo dentário, dente decíduo e dente permanente. Os critérios de inclusão utilizados foram: artigos em inglês e português sobre incidência, prevalência e etiologia, guias de procedimentos e casos clínicos apenas de traumatismo dentário, sendo excluídos artigos de clareamento de dentes traumatizados, traumas faciais ósseos e casos clínicos de acompanhamento reduzido. SÍNTESE DOS DADOS: Os dados foram descritos de forma concisa para se tornar um guia de fácil leitura e rápido acesso em relação à conduta, necessidade de atendimento imediato e correta escolha de soluções para armazenagem dos dentes e fragmentos. CONCLUSÕES: O conhecimento sobre o assunto, a agilidade no tratamento de urgência e o correto encaminhamento do paciente proporcionam melhor prognóstico.
Resumo:
Objective: To investigate the effect of applying two educational programs (one using a self-instructional approach and the other using a traditional approach similar to educational workshops), on the perceived frequency of musculoskeletal symptoms. Methods: A quasi-experimental study was conducted in 94 office workers in a public company. The participants were divided into three groups through simple randomized sampling with no replacement, The first group (32 employees) underwent a traditional/workshop program, the second (28) used a self-instructional manual and the third (34) was a Control Group. The frequency of musculoskeletal symptoms was measured by means of the Nordic Musculoskeletal Questionnaire, at the beginning of the program and 30 days after its completion. The statistical analysis consisted of descriptive statistics, a nonparametric analysis of variance technique for a repeated measure model in three independent groups and the Goodman test. Results: From the data collected in pre and post-test comparisons, it was observed that the traditional/workshop educational program significantly reduced the frequency of musculoskeletal symptoms over the final seven days. For the self-instructional manual group and control group, no difference was observed in the frequency of musculoskeletal symptoms, Conclusions: It could be concluded that the interventions. particularly the traditional approach using educational workshops, had a positive effect on the individuals' actions. Despite the complexity of some of the preventive measures needed, there was a reduction in musculoskeletal symptoms of the participants during work.
Resumo:
OBJETIVO: analisar separada e comparativamente cinco marcas comerciais de elásticos sintéticos (Morelli, Ormco, GAC, TP e Unitek) quanto à degradação da força gerada por estes em função do tempo, quando mantidos continuamente estirados em uma distância de 20mm. METODOLOGIA: as leituras das quantidades de força gerada pelos elásticos foram feitas nos intervalos 1/2, 1, 6, 12, 24, 48 horas; 7, 14, 21 e 28 dias. Construiu-se um gráfico de força versus tempo, onde se pôde observar significativa redução na quantidade de força liberada pelos elásticos na primeira hora de ativação. RESULTADOS: verificou-se uma redução na quantidade de força gerada pelos elásticos de 20,31 a 38,47% na primeira hora de testes e de 47,7 a 75,95% em 28 dias de estiramento constante. CONCLUSÕES: concluiu-se que todas as amostras das marcas comerciais estudadas sofreram significativa redução na quantidade de força liberada na primeira hora de ativação e que a média de força gerada em 21 e 28 dias de testes foi semelhante para todas as amostras pesquisadas.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)