Environmental assessment of residues generated after consecutive acid-base pretreatment of sugarcane bagasse by advanced oxidative process

Abstract Background Biofuels produced from sugarcane bagasse (SB) have shown promising results as a suitable alternative of gasoline. Biofuels provide unique, strategic, environmental and socio-economic benefits. However, production of biofuels from SB has negative impact on environment due to the use of harsh chemicals during pretreatment. Consecutive sulfuric acid-sodium hydroxide pretreatment of SB is an effective process which eventually ameliorates the accessibility of cellulase towards cellulose for the sugars production. Alkaline hydrolysate of SB is black liquor containing high amount of dissolved lignin. Results This work evaluates the environmental impact of residues generated during the consecutive acid-base pretreatment of SB. Advanced oxidative process (AOP) was used based on photo-Fenton reaction mechanism (Fenton Reagent/UV). Experiments were performed in batch mode following factorial design L9 (Taguchi orthogonal array design of experiments), considering the three operation variables: temperature (°C), pH, Fenton Reagent (Fe2+/H2O2) + ultraviolet. Reduction of total phenolics (TP) and total organic carbon (TOC) were responsive variables. Among the tested conditions, experiment 7 (temperature, 35°C; pH, 2.5; Fenton reagent, 144 ml H2O2+153 ml Fe2+; UV, 16W) revealed the maximum reduction in TP (98.65%) and TOC (95.73%). Parameters such as chemical oxygen demand (COD), biochemical oxygen demand (BOD), BOD/COD ratio, color intensity and turbidity also showed a significant change in AOP mediated lignin solution than the native alkaline hydrolysate. Conclusion AOP based on Fenton Reagent/UV reaction mechanism showed efficient removal of TP and TOC from sugarcane bagasse alkaline hydrolysate (lignin solution). To the best of our knowledge, this is the first report on statistical optimization of the removal of TP and TOC from sugarcane bagasse alkaline hydrolysate employing Fenton reagent mediated AOP process.

Fe valence fluctuations and magnetoelastic coupling in Pb-based multiferroics perovskites

Lead-based multiferroics perovskites with nominal compositions Pb(Fe1/2Nb1/2)O3 and Pb(Fe2/3W1/3)O3 were synthesized following a two-stage method. Magnetic proprieties were investigated and correlated to anelastic proprieties, measured by the conventional pulse-echo method. The discussions are focused in the region around 250 K, where magnetoelectroelastic instabilities have been observed. X-ray absorption nearedge structure (XANES) study further indicates that the edge position varies with temperature revealing a fluctuation on the valence of iron ions with the temperature, which can be related to a variation in anelastic and magnetic proprieties.

Materialeigenschaften und Optimierungspotential von farbigen Korunden am Beispiel vietnamesischer und synthetischer Rubine

Die vorliegende Arbeit beschäftigt sich mit Rubinen der drei derzeit bedeutendsten Vorkommen in Nord-Vietnam, mit ihrer Entstehung, ihrer Charakterisierung, ihrem Edelsteinpotential und ihren Materialeigenschaften im Kontext mit handelsüblichen Synthesen. Zur Erstellung der hierfür erforderlichen Datenbanken wurden sowohl phasenanalytische wie chemisch-analytische als auch spektroskopische Methoden benutzt und die Ergebnisse mit den Erkenntnissen klassischer gemmologischer Untersuchungsmethoden interpretiert. Die natürlichen Bildungsbedingungen der Rubine werden der granulit-faziellen Metamorphose der Day Nui Con Voi - Zone innerhalb der Red River Ailao Shan - Region Südostasiens zugerechnet. Marmore, Gneise und Mobilisationszonen zwischen sehr unterschiedlichen Gesteinen sind dabei zu Trägern von oxidischen Edelsteinmineralen wie Rubin und Spinell geworden, gleichzeitig entstandene Magmatite führen silikatische Edelsteinminerale wie Turmalin und Topas.Mit IR-, Ramanspektroskopie, Elektronstrahl-Mikrosonde und Edelsteinmikroskop werden Kaolinit, Boehmit, Glimmer, Diaspor, Calcit, Zirkon, Turmalin, Graphit, Rutil als charakterisierende Mineraleinschlüsse in vietnamesischen Rubinen bestimmt. Die chemische Zusammensetzung vietnamesischer und synthetischer Rubine wurde mit der Elektronenstrahl-Mikrosonde untersucht. Die vietnamesischen Rubine von Yen Bai, Luc Yen und Nghe An sind aufgrund spezieller Spurenelement-Kombinationen und auch durch Absolutgehalte bestimmter Elemente relativ sicher von Synthesen jeglicher Art zu unterscheiden; selbst die qualitativ besten Synthesen (Douros), die mit klassischen Methoden nur schwer als solche zu identifizieren sind, können von hochwertigen natürlichen Rubinen differenziert werden. Polarisierte Absorptionsspektren vietnamesischer Rubine zeigen die typischen Banden des Cr3+ in der Kristallstruktur des Rubins bei 17953 cm-1; 24570 cm-1 (E?c) sowie 17985 cm-1 und 25125 cm-1 (E//c). Sie entsprechen den Spinübergängen 4A2g?4T2g(4F) und 4A2g?4T1g(4F); eine zu beobachtende Verschiebung der Spektrenkante bei 32500 cm-1 zu 35000 cm-1 nach Temperaturbehandlung wird wahrscheinlich von V3+ verursacht. Mit Laser-Fluoreszenzspektroskopie wurden polarisierte Emissionsspektren von ausgewählten Rubinen mit spezieller Spurenelementchemie aufgenommen; dabei konnte die Schwächung der Fluoreszenzintensität von Cr durch Fe festgestellt werden. Die Emissionsspektren bestehen aus dem charakteristischen Chromdublett (R1 und R2 Linien bei etwa 693 nm und 694 nm), Seitenbanden in Stoke und anti Stoke-Bereich und n-Linien, die auf die Emission benachbarter, farbwirksamer Ionenpaare zurückzuführen sind. Das Verhältnis der Intensitäten der n-Linien bei 702 nm und 705 nm zu den Seitenbandenlinien bei 713 nm zeigt im untersuchten Cr3+-Konzentrationsbereich eine nahezu lineare Abhängigkeit zur Cr3+-Konzentration, unabhängig von der Anregungswellenlänge und der Fe-Konzentration. Die in vietnamesischen Rubinen häufig vorkommenden blauen Farbzonen werden durch elektronische Wechselwirkung von Fe2+/Fe3+ und Fe2+/Ti4+ -Kombinationen verursacht und können für den Edelstein schadlos durch geeignete Temperaturbehandlung eliminiert werden.

Untersuchung zur Temperaturabhängigkeit der O2-Bindungseigenschaft von Hämocyanin aus Arthropoden verschiedener Biotope

Die Evolution hat nur wenige O2-Transportproteine im Tierreich hervorgebracht. Sie alle nutzen entweder die Metallionen Fe2+ oder Cu2+ zur reversiblen Sauerstoffbindung in vier verschiedenen Typen von aktiven Zentren. Die Metallatome werden dabei über eine prosthetische Gruppe (Porphyrin-Ring) oder direkt (koordinativ) durch Histidine an die Proteinmatrix gebunden. Die Atmungsproteine sorgen für den Transport des Sauerstoffs von den respiratorischen Epithelien (Lunge, Kiemen), hin zu den O2 verbrauchenden Gewebszellen (oxidativer Stoffwechsel). Die Beladung mit Sauerstoff in den Lungen, bzw. den Kiemen sollte leicht und schnell, d.h. mit einer möglichst hohen O2-Affinität erfolgen. Die Arthropoden sind ein sehr artenreicher und erfolgreicher Tierstamm. Ihnen ist es im Laufe der Evolution gelungen, fast alle Lebensräume zu Wasser, auf dem Land und in der Luft zu besiedeln. Die Erschließung so unterschiedlicher Biotope setzt eine sehr gute physiologische Anpassungsfähigkeit voraus. Das physiologisch wichtigste Problem, welches für jeden Lebensraum während der Evolution gelöst werden mußte, ist eine optimale Sauerstoffversorgung der Körperzellen bei allen Umweltbedingungen zu gewährleisten. Ziel dieser Arbeit war es zu untersuchen, inwieweit verschiedene Arthropoden-Hämocyanine eine biotopabhängige (temperaturabhängige) Adaptation der O2-Versorgung (Proteinfunktion) auf Ebene des Hämocyaninmoleküls zeigen. Bei den hier untersuchten Hämocyaninen ließ sich eine signifikante Biotopabhängigkeit für den „Proteinfunktions-Parameter“ Kooperativität nachweisen.

Weathering of Fe-bearing minerals under extraterrestrial conditions, investigated by Mössbauer spectroscopy

The weathering of Fe-bearing minerals under extraterrestrial conditions was investigated by Mössbauer (MB) spectroscopy to gain insights into the role of water on the planet Mars. The NASA Mars Exploration Rovers Spirit and Opportunity each carry a miniaturized Mössbauer spectrometer MIMOS II for the in situ investigation of Martian soils and rocks as part of their payload. The MER flight instruments had to be modified in order to work over the Martian diurnal temperature range (180 K – 290 K) and within the unique electronic environment of the rovers. The modification required special calibration procedures. The integration time necessary to obtain a good quality Mössbauer spectrum with the MIMOS II flight instruments was reduced by 30 % through the design of a new collimator. The in situ investigation of rocks along the rover Spirit's traverse in Gusev crater revealed weakly altered olivine basalt on the plains and pervasively altered basalt in the Columbia Hills. Correlation plots of primary Fe-bearing minerals identified by MB spectroscopy such as olivine versus secondary Fe-bearing phases such as nanophase Fe oxides showed that olivine is the mineral which is primarily involved in weathering reactions. This argues for a reduced availability of water. Identification of the Fe-oxyhydroxide goethite in the Columbia Hills is unequivocal evidence for aqueous weathering processes in the Columbia Hills. Experiments in which mineral powders were exposed to components of the Martian atmosphere showed that interaction with the atmosphere alone, in the absence of liquid water, is sufficient to oxidize Martian surface materials. The fine-grained dust suspended in the Martian atmosphere may have been altered solely by gas-solid reactions. Fresh and altered specimens of Martian meteorites were investigated with MIMOS II. The study of Martian meteorites in the lab helped to identify in Bounce Rock the first rock on Mars which is similar in composition to basaltic shergottites, a subgroup of the Martian meteorites. The field of astrobiology includes the study of the origin, evolution and distribution of life in the universe. Water is a prerequisite for life. The MER Mössbauer spectrometers identified aqueous minerals such as jarosite and goethite. The identification of jarosite was crucial to evaluate the habitability of Opportunity's landing site at Meridiani Planum during the formation of the sedimentary outcrop rocks, because jarosite puts strong constrains on pH levels. The identification of olivine in rocks and soils on the Gusev crater plains provide evidence for the sparsity of water under current conditions on Mars. Ratios of Fe2+/Fe3+ were obtained with Mössbauer spectroscopy from basaltic glass samples which were exposed at a deep sea hydrothermal vent. The ratios were used as a measure of potential energy for use by a microbial community. Samples from Mars analogue field sites on Earth exhibiting morphological biosignatures were also investigated.

Statistische Betrachtungen und mößbauerspektroskopische Untersuchungen von Ordnungszuständen in Biotiten

Im Mittelpunkt der vorliegenden Arbeit standen Untersuchungen zu strukturellen Ordnungs- und Unordnungsphänomenen an natürlichen, substitutionellen Mischkristallen. Aufgrund der enormen Vielfalt an potentiellen Austauschpartnern wurden hierfür Vertreter der Biotit-Mischkristallreihe "Phlogopit-Annit" ausgewählt. Ihr modulartiger Aufbau ermöglichte die gezielte Beschreibung von Verteilungsmustern anionischer und kationischer Merkmalsträger innerhalb der Oktaederschicht der Biotit-Mischkristalle. Basierend auf der postulierten Bindungsaffinität zwischen Mg2+ und F- einerseits und Fe2+ und OH- andererseits, wurde die strukturelle Separation einer Fluor-Phlogopit-Komponente als primäre Ausprägungsform des Mg/F-Ordnungsprinzips abgeleitet. Im Rahmen dieser Modellvorstellung koexistieren im makroskopisch homogenen Biotit-Mischkristall Domänen zweier chemisch divergenter Phasen nebeneinander: Eine rein Mg2+/F- - führende Phlogopit-Phase und eine Wirtskristallphase, die mit fortschreitender Separation bzw. Entmischung der erstgenannten Phase sukzessive reicher an einer hydroxylführenden eisenreichen Annit-Komponente wird. Zwecks numerischer Beschreibung diverser Stadien der Entmischungsreaktion wurden die Begriffe der "Relativen" und "Absoluten Domänengröße" eingeführt. Sie stellen ein quantitatives Maß zur Beurteilung der diskutierten Ordnungsphänomene dar. Basierend auf einem sich stetig ändernden Chemismus der Wirtskristallphase kann jeder Übergangszustand zwischen statistischer Verteilung und vollständiger Ordnung durch das korrespondierende Verteilungsmuster der interessierenden Merkmalsträger ( = Nahordnungskonfiguration und Besetzungswahrscheinlichkeit) charakterisiert und beschrieben werden. Durch mößbauerspektroskopische Untersuchungen konnten die anhand der entwickelten Modelle vorhergesagten Ausprägungsformen von Ordnungs-/Unordnungsphänomenen qualitativ und quantitativ verifiziert werden. Es liessen sich hierbei zwei Gruppen von Biotit-Mischkristallen unterscheiden. Eine erste Gruppe, deren Mößbauer-Spektren durch den OH/F-Chemismus als dominierendes Differenzierungsmerkmal geprägt wird, und eine zweite Gruppe, deren Mößbauer-Spektren durch Gruppierungen von höherwertigen Kationen und Vakanzen ( = Defektchemie) geprägt wird. Auf der Basis von Korrelationsdiagrammen, die einen numerischen und graphischen Bezug zwischen absoluter und relativer Domänengröße einerseits und experimentell zugänglichem Mößbauer-Parameter A (= relativer Flächenanteil, korrespondierend mit der Besetzungswahrscheinlichkeit einer bestimmten Nahordnungs-konstellation) andererseits herstellen, konnten für die erste Gruppe die Volumina der beiden miteinander koexistierenden Komponenten "Hydroxyl-Annit reicher Wirtskristall" und "Fluor-Phlogopit" exakt quantifiziert werden. Das Spektrum der untersuchten Proben umfasste hierbei Kristallspezies, die einerseits durch geringe bis mittlere Mg2+/F- - bzw. Fe2+/OH- -Ordnungsgrade gekennzeichnet sind, andererseits eine nahezu vollständige Ordnung der interessierenden Merkmalsträger Mg2+, Fe2+, OH- und F- widerspiegeln. Desweiteren konnte der Nachweis geführt werden, dass für ausgewählte Proben eine quantitative Bestimmung der Defektvolumina möglich ist.

Diversity of microbial communities at shallow-hydrothermal vents off Dominica, Lesser Antilles

Hydrothermal vents are often compared to desert oases, because of the presence of highly diverse and abundant biotic communities inhabiting these extreme environments. Nevertheless, the microbial communities associated with shallow-hydrothermal systems have been poorly studied. Hydrothermal activity at Dominica Island is quite well known under the geological and geochemical aspects, but no previous information existed about the microbial communities associated to this area. This thesis is therefore targeting the microbiology of hydrothermal sediments combining geochemical and molecular biological investigations, focusing on differences between hydrothermal vents and background (i.e. control) areas, and between hydrothermal sites. It was also intended to assess relationship between geochemical parameters and microbial diversity at the two hydrothermally impacted sites. Two shallow-sea hydrothermal vents located south-west off Dominica Island (Lesser Antilles) have been investigated in this study: Champagne Hot Springs and Soufriere Bay offshore vent. During this study, sediments for geochemical and molecular analyses were collected every 2 cm from the two impacted areas and from two control sites not associated with hydrothermal activity; in situ temperatures measurements were also taken every 5 cm deep in the sediment for all the sites. A geochemical characterization of the sediment porewater was performed through the analysis of several elements’ concentrations (i.e. H2S, Cl-, Br-, SO42-, Fe2+, Na+, K+, B+, Si+). Microbial communities at the different sites were studied by Automated Intergenic Spacer Analysis (ARISA). Inspection of the operational taxonomic units (OTUs) distribution was performed, as well as statistical analyses for communities’ structure and composition differences, and for changes of β-diversity along with sediment geochemistry. Data suggested that mixing between hydrothermal fluids and seawater results in distinct different environmental gradients and potential ecological niches between the two investigated hydrothermal vents, reflecting a difference in microbial community structures between them.

Using sulfur isotope fractionation to understand the atmospheric oxidation of SO 2

Sulfate aerosol plays an important but uncertain role in cloud formation and radiative forcing of the climate, and is also important for acid deposition and human health. The oxidation of SO2 to sulfate is a key reaction in determining the impact of sulfate in the environment through its effect on aerosol size distribution and composition. This thesis presents a laboratory investigation of sulfur isotope fractionation during SO2 oxidation by the most important gas-phase and heterogeneous pathways occurring in the atmosphere. The fractionation factors are then used to examine the role of sulfate formation in cloud processing of aerosol particles during the HCCT campaign in Thuringia, central Germany. The fractionation factor for the oxidation of SO2 by ·OH radicals was measured by reacting SO2 gas, with a known initial isotopic composition, with ·OH radicals generated from the photolysis of water at -25, 0, 19 and 40°C (Chapter 2). The product sulfate and the residual SO2 were collected as BaSO4 and the sulfur isotopic compositions measured with the Cameca NanoSIMS 50. The measured fractionation factor for 34S/32S during gas phase oxidation is αOH = (1.0089 ± 0.0007) − ((4 ± 5) × 10−5 )T (°C). Fractionation during oxidation by major aqueous pathways was measured by bubbling the SO2 gas through a solution of H2 O2

Internal characteristics, chemical compounds and spectroscopy of sapphire as single crystals

In this study more than 450 natural sapphire samples (most of basaltic type) collected from 19 different areas were examined. They are from Dak Nong, Dak Lak, Quy Chau, two unknown sources from the north (Vietnam); Bo Ploi, Khao Ploi Waen (Thailand); Ban Huay Sai (Laos); Australia; Shandong (China); Andapa, Antsirabe, Nosibe (Madagascar); Ballapana (Sri Lanka); Brazil; Russia; Colombia; Tansania and Malawi. rnThe samples were studied on internal characteristics, chemical compositions, Raman-, luminescence-, Fourier transform infrared (FTIR)-, and ultraviolet-visible-near infrared (UV-Vis-NIR)- spectroscopy. The internal features of these sapphire samples were observed and identified by gemological microscope, con focal micro Raman and FTIR spectroscopy. The major and minor elements of the samples were determined by electron probe microanalysis (EPMA) and the trace elements by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). rnThe structural spectra of sapphire were investigated by con focal Raman spectroscopy. The FTIR spectroscopy was used to study the vibration modes of OH-groups and also to determine hydrous mineral inclusions in sapphire. The UV-Vis-NIR absorption spectroscopy was used to analyze the cause of sapphire color. rnNatural sapphires contain many types of mineral inclusions. Typically, they are iron-containing inclusions like goethite, ilmenite, hematite, magnetite or silicate minerals commonly feldspar, and often observed in sapphires from Asia countries, like Dak Nong, Dak Lak in the south of Vietnam, Ban Huay Sai (Laos), Khao Ploi Waen and Bo Ploi (Thailand) or Shandong (China). Meanwhile, CO2-diaspore inclusions are normally found in sapphires from Tansania, Colombia, or the north of Vietnam like Quy Chau. rnIron is the most dominant element in sapphire, up to 1.95 wt.% Fe2O3 measured by EPMA and it affects spectral characteristics of sapphire.rnThe Raman spectra of sapphire contain seven peaks (2A1g + 5Eg). Two peaks at about 418.3 cm-1 and 577.7 cm-1 are influenced by high iron content. These two peaks shift towards smaller wavenumbers corresponding to increasing iron content. This shift is showed by two equations y(418.3)=418.29-0.53x andy(577.7)=577.96-0.75x, in which y is peak position (cm-1) and x is Fe2O3 content (wt.%). By exploiting two these equations one can estimate the Fe2O3 contents of sapphire or corundum by identifying the respective Raman peak positions. Determining the Fe2O3 content in sapphire can help to distinguish sapphires from different origins, e.g. magmatic and metamorphic sapphire. rnThe luminescence of sapphire is characterized by two R-lines: R1 at about 694 nm and R2 at about 692 nm. This characteristic is also influenced by high iron content. The peak positions of two R-lines shift towards to smaller wavelengths corresponding to increasing of iron content. This correlation is showed by two equations y(R_2 )=692.86-0.049x and y(R_1 )=694.29-0.047x, in which y is peak position (nm) of respective R-lines and x is Fe2O3 content (wt.%). Two these equations can be applied to estimate the Fe2O3 content of sapphire and help to separate sapphires from different origins. The luminescence is also applied for determination of the remnant pressure or stress around inclusions in Cr3+-containing corundum by calibrating a 0-pressure position in experimental techniques.rnThe infrared spectra show the presence of vibrations originating from OH-groups and hydrous mineral inclusions in the range of 2500-4000 cm-1. Iron has also an effect upon the main and strongest peak at about 3310 cm-1. The 3310 cm-1 peak is shifted to higher wavenumber when iron content increases. This relationship is expressed by the equation y(3310)=0.92x+3309.17, in which y is peak position of the 3310 cm-1 and x is Fe2O3 content (wt.%). Similar to the obtained results in Raman and luminescence spectra, this expression can be used to estimate the Fe2O3 content and separate sapphires from different origins. rnThe UV-Vis-NIR absorption spectra point out the strong and sharp peaks at about 377, 387, and 450 nm related to dispersed Fe3+, a broad band around 557 and 600 nm related to intervalence charge transfer (IVCT) Fe2+/Ti4+, and a broader band around 863 nm related to IVCT of Fe2+/Fe3+. rnGenerally, sapphires from different localities were completely investigated on internal features, chemical compounds, and solid spectral characteristics. The results in each part contribute for identifying the iron content and separate sapphires from different localities order origins. rn

Functional properties of multiple isoforms of human divalent metal-ion transporter 1 (DMT1)

DMT1 (divalent metal-ion transporter 1) is a widely expressed metal-ion transporter that is vital for intestinal iron absorption and iron utilization by most cell types throughout the body, including erythroid precursors. Mutations in DMT1 cause severe microcytic anaemia in animal models. Four DMT1 isoforms that differ in their N- and C-termini arise from mRNA transcripts that vary both at their 5'-ends (starting in exon 1A or exon 1B) and at their 3'-ends giving rise to mRNAs containing (+) or lacking (-) the 3'-IRE (iron-responsive element) and resulting in altered C-terminal coding sequences. To determine whether these variations result in functional differences between isoforms, we explored the functional properties of each isoform using the voltage clamp and radiotracer assays in cRNA-injected Xenopus oocytes. 1A/IRE+-DMT1 mediated Fe2+-evoked currents that were saturable (K(0.5)(Fe) approximately 1-2 microM), temperature-dependent (Q10 approximately 2), H+-dependent (K(0.5)(H) approximately 1 muM) and voltage-dependent. 1A/IRE+-DMT1 exhibited the provisional substrate profile (ranked on currents) Cd2+, Co2+, Fe2+, Mn2+>Ni2+, V3+>>Pb2+. Zn2+ also evoked large currents; however, the zinc-evoked current was accounted for by H+ and Cl- conductances and was not associated with significant Zn2+ transport. 1B/IRE+-DMT1 exhibited the same substrate profile, Fe2+ affinity and dependence on the H+ electrochemical gradient. Each isoform mediated 55Fe2+ uptake and Fe2+-evoked currents at low extracellular pH. Whereas iron transport activity varied markedly between the four isoforms, the activity for each correlated with the density of anti-DMT1 immunostaining in the plasma membrane, and the turnover rate of the Fe2+ transport cycle did not differ between isoforms. Therefore all four isoforms of human DMT1 function as metal-ion transporters of equivalent efficiency. Our results reveal that the N- and C-terminal sequence variations among the DMT1 isoforms do not alter DMT1 functional properties. We therefore propose that these variations serve as tissue-specific signals or cues to direct DMT1 to the appropriate subcellular compartments (e.g. in erythroid cells) or the plasma membrane (e.g. in intestine).

The Effect of the Cu:Fe''' Ratio Upon the Current Efficiency in the Electrolysis of a Copper Sulfate Solution Containing Iron Sulfate

It is a well-known fact that, in the electrolysis of a CuSO4 solution containing iron sulfate, using insoluble anodes, with the depletion of copper, the point is finally reached where the current efficiency becomes zero. This decrease in current efficiency is due to the oxidation of the ferrous sulfate to the ferric condition at the anode, by the oxygen liberated. The resulting ferric sulfate diffuses over to the cathode and there dissolves copper from the cathode according to the chemical equation Cu + Fe2 (SO4)3 = CuSO4 + 2FeSO4. This copper, which has been deposited at the cathode by the electric current, is thus redissolved by the Fe2(SO4)3. The solution of the copper causes at the same time a formation of FeSO4 which in turn diffuses over to the anode and is there oxidized to Fe2(SO4)3; and so the cycle continues, using electric current without rendering useful work. E. H. Larison has noted that a definite amount of ferric salts must be reduced to the ferrous condition before all the copper will remain on the cathode; he does not state, however, just what this point is. L. Addicks has plotted the relation between current efficiency and ferric sulphate content. The existence of the results scattered the points more or less, although the decrease in current efficiency with increased ferric sulphate content is clearly indicated. E. T.Kern has likewise noted that the smaller the amount of copper in the solution, the greater is the reduction of current efficiency. In this work, therefore, it was desired to determine what amount of ferric iron was permissible in a copper sulfate solution of definite concentration before the current efficiency would drop to zero, and what, if any, was the effect of definite Cu:Fe’’’ratio upon the current efficiency of the electrolysis.

Prismatine and Ferrohogbomite-2N2S in Granulite-Facies Fe-Oxide Lenses in the Eastern Ghats Belt at Venugopalapuram, Vizianagaram District, Andhra Pradesh, India: Do Such Lenses Have a Tourmaline-Enriched Lateritic Precursor?

Fluorine-rich prismatine, (square,Fe,Mg)(Mg,Al,Fe)(5)Al-4(Si,B,Al)(5)O-21(OH,F), with F/(OH+F) = 0.36-0.40 and hercynite are major constituents of a Fe-Al-B-rich lens in ultrahigh-temperature granulite-facies quartz-sillimanite-hypersthene-cordierite gneisses of the Eastern Ghats belt, Andhra Pradesh, India. Hemo-ilmenite. sapphirine, magnetite, biotite and sillimanite are subordinate. Lithium, Be and B are concentrated in prismatine (140 ppm Li, 170 ppm Be, and 2.8-3.0 wt.% B2O3). Another Fe-rich lens is dominantly magnetite, which encloses fine-grained zincian ferrohogbomite-2N2S, (Fe2+ Mg,Zn,Al)(6) (Al,Fe3+,Ti)(16)O-30(OH)(2), containing minor Ga2O3 (0.30-0.92 wt.%). Fe-Al-B-rich lenses with prismatine (or kornerupine) constitute a distinctive type of B-enrichment in granulite-facies rocks and have been reported from four other localities worldwide. A scenario involving a tourmaline-enriched lateritic precursor affected by dehydration melting is our preferred explanation for the origin of the Fe-Al-B-rich lenses at the five localities. Whole-rock analyses and field relationships at another of these localities, Bok se Puts, Namaqualand, South Africa, are consistent with this scenario. Under granulite-facies conditions, tourmaline would have broken down to give korner-upine-prismatine ( other borosilicates) plus a sodic melt containing H2O and B. Removal of this melt depleted the rock in Na and B, but the formation of ferromagnesian borosilicate phases in the restite prevented total loss of B.

Prismatine: Revalidation for Boron-Rich Compositions in the Kornerupine Group

Kornerupine and prismatine were introduced independently by Lorenzen in 1884 (but published in 1886 and 1893) and by Sauer in 1886, respectively. Ussing (1889) showed that the two minerals were sufficiently close crystallographically and chemically to be regarded as one species. However, recent analyses of boron using the ion microprobe and crystal structure refinement, indicate that the boron content of one tetrahedral site in kornerupine ranges from 0 to 1. Kornerupine and prismatine, from their respective type localities of Fiskenaesset, Greenland and Waldheim, Germany, are distinct minerals, members of an isomorphic series differing in boron content. For this reason, we re-introduce Sauer's name prismatine for kornerupines with B > 0.5 atoms per formula unit (p.f.u.) of 22(O,OH,F), and restrict the name kornerupine sensu stricto to kornerupines with B < 0.5 p.f.u. Kornerupine sensu lato is an appropriate group name for kornerupine of unknown boron content. Kornerupine sensu stricto and prismatine from the type localities differ also in Fe2+/Mg ratio, Si - (Mg + Fe2+ + Mn) content, Al content, F content, colour, density, cell parameters, and paragenesis. Both minerals formed under granulite-facies conditions with sapphirine and phlogopite, but kornerupine sensu stricto is associated with anorthite and homblende or gedrite, whereas prismatine is found with oligoclase (An9-13), sillimanite, garnet, and/or tourmaline. Occurrences at other localities suggest that increasing boron content extends the stability range of prismatine relative to that of kornerupine sensu stricto.

The triplite–triploidite supergroup: structural modulation in wagnerite, discreditation of magniotriplite, and the new mineral hydroxylwagnerite

Electron-microprobe analysis, single-crystal X-ray diffraction with an area detector, and high-resolution transmission electron microscopy show that minerals related to wagnerite, triplite and triploidite, which are monoclinic Mg, Fe and Mn phosphates with the formula Me2+ 2PO4(F,OH), constitute a modulated series based on the average triplite structure. Modulation occurs along b and may be commensurate with (2b periodicity) or incommensurate but generally close to integer values (∼3b, ∼5b, ∼7b, ∼9b), i.e. close to polytypic behaviour. As a result, the Mg- and F-dominant minerals magniotriplite and wagnerite can no longer be considered polymorphs of Mg2PO4F, i.e., there is no basis for recognizing them as distinct species. Given that wagnerite has priority (1821 vs. 1951), the name magniotriplite should be discarded in favour of wagnerite. Hydroxylwagnerite, end-member Mg2PO4OH, occurs in pyrope megablasts along with talc, clinochlore, kyanite, rutile and secondary apatite in two samples from lenses of pyrope–kyanite–phengite–quartz-schist within metagranite in the coesite-bearing ultrahigh-pressure metamorphic unit of the Dora-Maira Massif, western Alps, Vallone di Gilba, Val Varaita, Piemonte, Italy. Electron microprobe analyses of holotype hydroxylwagnerite and of the crystal with the lowest F content gave in wt%: P2O5 44.14, 43.99; SiO2 0.28, 0.02; SO3 –, 0.01; TiO2 0.20, 0.16; Al2O3 0.06, 0.03; MgO 48.82, 49.12; FeO 0.33, 0.48; MnO 0.01, 0.02; CaO 0.12, 0.10; Na2O 0.01, –; F 5.58, 4.67; H2O (calc) 2.94, 3.36; –O = F 2.35, 1.97; Sum 100.14, 99.98, corresponding to (Mg1.954Fe0.007Ca0.003Ti0.004Al0.002Na0.001)Σ=1.971(P1.003Si0.008)Σ=1.011O4(OH0.526F0.474)Σ=1 and (Mg1.971Fe0.011Ca0.003Ti0.003Al0.001)Σ=1.989(P1.002Si0.001)Σ=1.003O4(OH0.603F0.397)Σ=1, respectively. Due to the paucity of material, H2O could not be measured, so OH was calculated from the deficit in F assuming stoichiometry, i.e., by assuming F + OH = 1 per formula unit. Holotype hydroxylwagnerite is optically biaxial (+), α 1.584(1), β 1.586(1), γ 1.587(1) (589 nm); 2V Z(meas.) = 43(2)°; orientation Y = b. Single-crystal X-ray diffraction gives monoclinic symmetry, space group P21/c, a = 9.646(3) Å, b = 12.7314(16) Å, c = 11.980(4) Å, β = 108.38(4) , V = 1396.2(8) Å3, Z = 16, i.e., hydroxylwagnerite is the OH-dominant analogue of wagnerite [β-Mg2PO4(OH)] and a high-pressure polymorph of althausite, holtedahlite, and α- and ε-Mg2PO4(OH). We suggest that the group of minerals related to wagnerite, triplite and triploidite constitutes a triplite–triploidite super-group that can be divided into F-dominant phosphates (triplite group), OH-dominant phosphates (triploidite group), O-dominant phosphates (staněkite group) and an OH-dominant arsenate (sarkinite). The distinction among the three groups and a potential fourth group is based only on chemical features, i.e., occupancy of anion or cation sites. The structures of these minerals are all based on the average triplite structure, with a modulation controlled by the ratio of Mg, Fe2+, Fe3+ and Mn2+ ionic radii to (O,OH,F) ionic radii.

Interaction of corroding iron with bentonite in the ABM1 experiment at Äspö, Sweden: A microscopic approach

Bentonite and iron metals are common materials proposed for use in deep-seated geological repositories for radioactive waste. The inevitable corrosion of iron leads to interaction processes with the clay which may affect the sealing properties of the bentonite backfill. The objective of the present study was to improve our understanding of this process by studying the interface between iron and compacted bentonite in a geological repository-type setting. Samples of MX-80 bentonite samples which had been exposed to an iron source and elevated temperatures (up to 115ºC) for 2.5 y in an in situ experiment (termed ABM1) at the Äspö Hard Rock Laboratory, Sweden, were investigated by microscopic means, including scanning electron microscopy, μ-Raman spectroscopy, spatially resolved X-ray diffraction, and X-ray fluorescence. The corrosion process led to the formation of a ~100 mm thick corrosion layer containing siderite, magnetite, some goethite, and lepidocrocite mixed with the montmorillonitic clay. Most of the corroded Fe occurred within a 10 mm-thick clay layer adjacent to the corrosion layer. An average corrosion depth of the steel of 22–35 μm and an average Fe2+ diffusivity of 1–26×10–13 m2/s were estimated based on the properties of the Fe-enriched clay layer. In that layer, the corrosion-derived Fe occurred predominantly in the clay matrix. The nature of this Fe could not be identified. No indications of clay transformation or newly formed clay phases were found. A slight enrichment of Mg close to the Fe–clay contact was observed. The formation of anhydrite and gypsum, and the dissolution of some SiO<inf>2</inf> resulting from the temperature gradient in the in situ test, were also identified. © 2014, Clay Minerals Society. All right reserved.