Facing the future: the importance of substratum features for ecological engineering of artificial habitats in the rocky intertidal

Coastal defences are proliferating in response to climate change, leading to the creation of more vertical substrata. Efforts are being made to mitigate their impacts and create novel habitats to promote biodiversity. Little is known about the effect of aspect (i.e. north–south directionality) and inclination on intertidal biodiversity in artificial habitats. Artificial and natural habitats were compared to assess the role of aspect and substratum inclination in determining patterns of biodiversity at two tidal heights (high and mid). We also compared grazing activity between north- and south-facing surfaces in natural habitats to examine the potential for differential grazing pressure to affect community structure and functioning. Results were variable but some clear patterns emerged. Inclination had no effect on biodiversity or abundance. There was a general trend towards greater taxon richness and abundance on north-facing than south-facing substrata in natural and artificial habitats. On natural shores, the abundance and grazing activity of ‘southern’ limpets (i.e. Patella depressa) was greater on south-facing than north-facing substrata, with possible implications for further range-expansion. These results highlight the importance of incorporating shaded habitats in the construction of artificial habitats. These habitats may represent an important refuge from grazing pressure and thermal and desiccation stress in a warming climate.

Chloride ingress into marine exposed concrete: A comparison of empirical- and physically- based models

In establishing the reliability of performance-related design methods for concrete – which are relevant for resistance against chloride-induced corrosion - long-term experience of local materials and practices and detailed knowledge of the ambient and local micro-climate are critical. Furthermore, in the development of analytical models for performance-based design, calibration against test data representative of actual conditions in practice is required. To this end, the current study presents results from full-scale, concrete pier-stems under long-term exposure to a marine environment with work focussing on XS2 (below mid-tide level) in which the concrete is regarded as fully saturated and XS3 (tidal, splash and spray) in which the concrete is in an unsaturated condition. These exposures represent zones where concrete structures are most susceptible to ionic ingress and deterioration. Chloride profiles and chloride transport behaviour are studied using both an empirical model (erfc function) and a physical model (ClinConc). The time dependency of surface chloride concentration (Cs) and apparent diffusivity (Da) were established for the empirical model whereas, in the ClinConc model (originally based on saturated concrete), two new environmental factors were introduced for the XS3 environmental exposure zone. Although the XS3 is considered as one environmental exposure zone according to BS EN 206-1:2013, the work has highlighted that even within this zone, significant changes in chloride ingress are evident. This study aims to update the parameters of both models for predicting the long term transport behaviour of concrete subjected to environmental exposure classes XS2 and XS3.

Advanced Non-Destructive Inspections focused on composite materials application for the automotive and marine sectors

The goal of this master thesis is to explain in detail the application of Non-Destructive-Inspection on the Automotive and the Marine sectors. Nowadays, these two particular industries faces many challenges, including increased global competition, the need for higher performance, a reduction in costs and tighter environmental and safety requirements. The materials used for these applications play key roles in overcoming these challenges. So, also an NDI procedure need to be planned in order to avoid problems during the manufacturing process and the after sale life of the structures. The entire thesis work has been done in collaboration with Vetorix Engineering.

Molecular cloning and expression of leptin in gray and harbor seal blubber, bone marrow, and lung and its potential role in marine mammal respiratory physiology

Leptin is a multifunctional hormone, produced predominantly in adipocytes. It regulates energy balance through its impact on appetite and fat metabolism, and its concentration indicates the size of body fat reserves. Leptin also plays a vital role in stretch-induced surfactant production during alveolar development in the fetus. The structure, expression pattern, and role of leptin have not previously been explored in marine mammals. Phocid seals undergo cyclical changes in body composition as a result of prolonged fasting and intensive foraging bouts and experience rapid, dramatic, and repeated changes in lung volume during diving. Here, we report the tissue-specific expression pattern of leptin in these animals. This is the first demonstration of leptin expression in the lung tissue of a mature mammal, in addition to its expression in the blubber and bone marrow, in common with other animals. We propose a role for leptin in seal pulmonary surfactant production, in addition to its likely role in long-term energy balance. We identify substitutions in the phocine leptin sequence in regions normally highly conserved between widely distinct vertebrate groups, and, using a purified seal leptin antiserum, we confirm the presence of the leptin protein in gray seal lung and serum fractions. Finally, we report the substantial inadequacies of using heterologous antibodies to measure leptin in unextracted gray seal serum.

Co-digestion of terrestrial plant biomass with marine macro-algae for biogas production

This paper investigates factors affecting anaerobic degradation of marine macro-algae (or seaweed), when used as a co-substrate with terrestrial plant biomass for the production of biogas. Using Laminaria digitata, a brown marine seaweed species and green peas, results showed that when only 2% of feedstock of a reactor treating the green peas at an organic loading rate (OLR) of 2.67 kg VS.m3.day-1 was replaced with the seaweed, methane production was disrupted, whilst acidogenesis, seemed to be less adversely affected, resulting in excessive volatile acids accumulation. Reactor stability was difficult to achieve thereafter. The experiment was repeated with a lower initial OLR of green peas of 0.70 kg VS.m3.day-1 before the addition of the seaweed. Although similar symptoms as in first trial were observed, process stability was restored through the control of OLR and alkalinity. These measures led to an increase in overall OLR of 1.25 kg VS.m3.day-1 comprising of 35% seaweed. This study has shown that certain seaweed constituents are more inhibitory to the methanogens even at trace concentrations than to the other anaerobic digestion microbial groups. Appropriate adaptation strategy, involving initial low proportion of the seaweed relative to the total OLR, and overall low OLR, is necessary to ensure effective adaptation of the microorganisms to the inhibitory constituents of seaweed. Where there is seasonal availability of seaweed, the results of this study suggest that a fresh adaptation or start-up strategy must be implemented during each cycle of seaweed availability in order to ensure sustainable process stability.

Investigate the effect of antibacterial ingredients used in marine paints in sea water

In this study, consider to the mechanism of controlled depletion paint, has been made the Antifouling (A/F) paints that use these in a paint system which applied on the steel. As a first step, it is necessary to prove that the system subject to investigation does fit into the mechanisms proposed for the CDPs system. According to this, the machine was designed and built as for ASTM D5108-90, D4939-89. Specimens immersed in natural sea water and were rotating by 60 r/min rotor. Painted specimens were tested for 59 days. The main objective of this study was to investigate if new antifouling paint are less toxic than traditional paint and more efficient. For this reason, Zineb and Ziram which is an ingredient in antifouling paints, was also studied. Zineb and Ziram are known as booster biocides in A/P composition. We used the Zineb and Ziram and synthesis of these in a A/F paints. The concentration of booster biocides are 3% and 6% in paints. We use scanning electron microscopy (SEM) for evaluation of paint film. The settlement and the growth of living organism on immersed surfaces was observed during 59 days. According to reports, the growth of organism was observed for A/F paint contains, 3% Zineb after 20days,3%Ziram after 24days and 3% Zineb +Ziram after 30days. By measuring leached rate of the Zn in A/F paints, we figured out the effectiveness of booster biocides on the growth of organism, for example in the absence of booster biocides, the critical released rate for preventing biofilm for A/F paint with ZnO is 15 μg/cm2day. This despite the fact that this figure for A/F paint contain Zineb is 4 μg/cm2, Ziram is 3 μg/cm2 and Zineb +Ziram is 2 μg/cm2.

Brucite Microbialites in Living Coral Skeletons: Indicators of Extreme Microenvironments in Shallow-Marine Settings

Brucite [Mg(OH)2] microbialites occur in vacated interseptal spaces of living scleractinian coral colonies (Acropora, Pocillopora, Porites) from subtidal and intertidal settings in the Great Barrier Reef, Australia, and subtidal Montastraea from the Florida Keys, United States. Brucite encrusts microbial filaments of endobionts (i.e., fungi, green algae, cyanobacteria) growing under organic biofilms; the brucite distribution is patchy both within interseptal spaces and within coralla. Although brucite is undersaturated in seawater, its precipitation was apparently induced in the corals by lowered pCO2 and increased pH within microenvironments protected by microbial biofilms. The occurrence of brucite in shallow-marine settings highlights the importance of microenvironments in the formation and early diagenesis of marine carbonates. Significantly, the brucite precipitates discovered in microenvironments in these corals show that early diagenetic products do not necessarily reflect ambient seawater chemistry. Errors in environmental interpretation may arise where unidentified precipitates occur in microenvironments in skeletal carbonates that are subsequently utilized as geochemical seawater proxies.