An integrated approach for distributed energy resource short term scheduling in smart grids considering realistic power system simulation

The large increase of distributed energy resources, including distributed generation, storage systems and demand response, especially in distribution networks, makes the management of the available resources a more complex and crucial process. With wind based generation gaining relevance, in terms of the generation mix, the fact that wind forecasting accuracy rapidly drops with the increase of the forecast anticipation time requires to undertake short-term and very short-term re-scheduling so the final implemented solution enables the lowest possible operation costs. This paper proposes a methodology for energy resource scheduling in smart grids, considering day ahead, hour ahead and five minutes ahead scheduling. The short-term scheduling, undertaken five minutes ahead, takes advantage of the high accuracy of the very-short term wind forecasting providing the user with more efficient scheduling solutions. The proposed method uses a Genetic Algorithm based approach for optimization that is able to cope with the hard execution time constraint of short-term scheduling. Realistic power system simulation, based on PSCAD , is used to validate the obtained solutions. The paper includes a case study with a 33 bus distribution network with high penetration of distributed energy resources implemented in PSCAD .

Demand response in electrical energy supply: an optimal real time pricing approach

In competitive electricity markets with deep concerns for the efficiency level, demand response programs gain considerable significance. As demand response levels have decreased after the introduction of competition in the power industry, new approaches are required to take full advantage of demand response opportunities. This paper presents DemSi, a demand response simulator that allows studying demand response actions and schemes in distribution networks. It undertakes the technical validation of the solution using realistic network simulation based on PSCAD. The use of DemSi by a retailer in a situation of energy shortage, is presented. Load reduction is obtained using a consumer based price elasticity approach supported by real time pricing. Non-linear programming is used to maximize the retailer’s profit, determining the optimal solution for each envisaged load reduction. The solution determines the price variations considering two different approaches, price variations determined for each individual consumer or for each consumer type, allowing to prove that the approach used does not significantly influence the retailer’s profit. The paper presents a case study in a 33 bus distribution network with 5 distinct consumer types. The obtained results and conclusions show the adequacy of the used methodology and its importance for supporting retailers’ decision making.

Emergency energy resource management in SmartGrids

Energy resources management can play a very relevant role in future power systems in a SmartGrid context, with intensive penetration of distributed generation and storage systems. This paper deals with the importance of resource management in incident situations. The paper presents DemSi, an energy resources management simulator that has been developed by the authors to simulate electrical distribution networks with high distributed generation penetration, storage in network points and customers with demand response contracts. DemSi is used to undertake simulations for an incident scenario, evidencing the advantages of adequately using flexible contracts, storage, and reserve in order to limit incident consequences.

Demsi - a demand response simulator in the context of intensive use of distributed generation

Demand response can play a very relevant role in future power systems in which distributed generation can help to assure service continuity in some fault situations. This paper deals with the demand response concept and discusses its use in the context of competitive electricity markets and intensive use of distributed generation. The paper presents DemSi, a demand response simulator that allows studying demand response actions and schemes using a realistic network simulation based on PSCAD. Demand response opportunities are used in an optimized way considering flexible contracts between consumers and suppliers. A case study evidences the advantages of using flexible contracts and optimizing the available generation when there is a lack of supply.

A probabilistic methodology for distributed generation location in isolated electrical service area

Distributed generation unlike centralized electrical generation aims to generate electrical energy on small scale as near as possible to load centers, interchanging electric power with the network. This work presents a probabilistic methodology conceived to assist the electric system planning engineers in the selection of the distributed generation location, taking into account the hourly load changes or the daily load cycle. The hourly load centers, for each of the different hourly load scenarios, are calculated deterministically. These location points, properly weighted according to their load magnitude, are used to calculate the best fit probability distribution. This distribution is used to determine the maximum likelihood perimeter of the area where each source distributed generation point should preferably be located by the planning engineers. This takes into account, for example, the availability and the cost of the land lots, which are factors of special relevance in urban areas, as well as several obstacles important for the final selection of the candidates of the distributed generation points. The proposed methodology has been applied to a real case, assuming three different bivariate probability distributions: the Gaussian distribution, a bivariate version of Freund’s exponential distribution and the Weibull probability distribution. The methodology algorithm has been programmed in MATLAB. Results are presented and discussed for the application of the methodology to a realistic case and demonstrate the ability of the proposed methodology for efficiently handling the determination of the best location of the distributed generation and their corresponding distribution networks.

Maximizing the Social Welfare of Virtual Power Players Operation in Case of Excessive Wind Power

The integration of growing amounts of distributed generation in power systems, namely at distribution networks level, has been fostered by energy policies in several countries around the world, including in Europe. This intensive integration of distributed, non-dispatchable, and natural sources based generation (including wind power) has caused several changes in the operation and planning of power systems and of electricity markets. Sometimes the available non-dispatchable generation is higher than the demand. This generation must be used; otherwise it is wasted if not stored or used to supply additional demand. New policies and market rules, as well as new players, are needed in order to competitively integrate all the resources. The methodology proposed in this paper aims at the maximization of the social welfare in a distribution network operated by a virtual power player that aggregates and manages the available energy resources. When facing a situation of excessive non-dispatchable generation, including wind power, real time pricing is applied in order to induce the increase of consumption so that wind curtailment is minimized. This method is especially useful when actual and day-ahead resources forecast differ significantly. The distribution network characteristics and concerns are addressed by including the network constraints in the optimization model. The proposed methodology has been implemented in GAMS optimization tool and its application is illustrated in this paper using a real 937-bus distribution network with 20.310 consumers and 548 distributed generators, some of them non-dispatchable and with must take contracts. The implemented scenario corresponds to a real day in Portuguese power system.

Defining Electricity Tariffs Using the Knowledge About the Consumers Profiles in ELECON Project

The increasing importance of the integration of distributed generation and demand response in the power systems operation and planning, namely at lower voltage levels of distribution networks and in the competitive environment of electricity markets, leads us to the concept of smart grids. In both traditional and smart grid operation, non-technical losses are a great economic concern, which can be addressed. In this context, the ELECON project addresses the use of demand response contributions to the identification of non-technical losses. The present paper proposes a methodology to be used by Virtual Power Players (VPPs), which are entities able to aggregate distributed small-size resources, aiming to define the best electricity tariffs for several, clusters of consumers. A case study based on real consumption data demonstrates the application of the proposed methodology.

Analysis of Consumption Data to Detect Commercial Losses Using Performance Evaluation Methods in a Smart Grid

Electric power networks, namely distribution networks, have been suffering several changes during the last years due to changes in the power systems operation, towards the implementation of smart grids. Several approaches to the operation of the resources have been introduced, as the case of demand response, making use of the new capabilities of the smart grids. In the initial levels of the smart grids implementation reduced amounts of data are generated, namely consumption data. The methodology proposed in the present paper makes use of demand response consumers’ performance evaluation methods to determine the expected consumption for a given consumer. Then, potential commercial losses are identified using monthly historic consumption data. Real consumption data is used in the case study to demonstrate the application of the proposed method.

Real-time Energy Resource Scheduling considering a Real Portuguese Scenario

The development in power systems and the introduction of decentralized generation and Electric Vehicles (EVs), both connected to distribution networks, represents a major challenge in the planning and operation issues. This new paradigm requires a new energy resources management approach which considers not only the generation, but also the management of loads through demand response programs, energy storage units, EVs and other players in a liberalized electricity markets environment. This paper proposes a methodology to be used by Virtual Power Players (VPPs), concerning the energy resource scheduling in smart grids, considering day-ahead, hour-ahead and real-time scheduling. The case study considers a 33-bus distribution network with high penetration of distributed energy resources. The wind generation profile is based on a real Portuguese wind farm. Four scenarios are presented taking into account 0, 1, 2 and 5 periods (hours or minutes) ahead of the scheduling period in the hour-ahead and realtime scheduling.

Gestão de Recursos Energéticos para Apoio à Operação dos Virtual Power Players

A liberalização dos mercados de energia elétrica e a crescente integração dos recursos energéticos distribuídos nas redes de distribuição, nomeadamente as unidades de produção distribuída, os sistemas de controlo de cargas através dos programas de demand response, os sistemas de armazenamento e os veículos elétricos, representaram uma evolução no paradigma de operação e gestão dos sistemas elétricos. Este novo paradigma de operação impõe o desenvolvimento de novas metodologias de gestão e controlo que permitam a integração de todas as novas tecnologias de forma eficiente e sustentável. O principal contributo deste trabalho reside no desenvolvimento de metodologias para a gestão de recursos energéticos no contexto de redes inteligentes, que contemplam três horizontes temporais distintos (24 horas, 1 hora e 5 minutos). As metodologias consideram os escalonamentos anteriores assim como as previsões atualizadas de forma a melhorar o desempenho total do sistema e consequentemente aumentar a rentabilidade dos agentes agregadores. As metodologias propostas foram integradas numa ferramenta de simulação, que servirá de apoio à decisão de uma entidade agregadora designada por virtual power player. Ao nível das metodologias desenvolvidas são propostos três algoritmos de gestão distintos, nomeadamente para a segunda (1 hora) e terceira fase (5 minutos) da ferramenta de gestão, diferenciados pela influência que os períodos antecedentes e seguintes têm no período em escalonamento. Outro aspeto relevante apresentado neste documento é o teste e a validação dos modelos propostos numa plataforma de simulação comercial. Para além das metodologias propostas, a aplicação permitiu validar os modelos dos equipamentos considerados, nomeadamente, ao nível das redes de distribuição e dos recursos energéticos distribuidos. Nesta dissertação são apresentados três casos de estudos, cada um com diferentes cenários referentes a cenários de operação futuros. Estes casos de estudos são importantes para verificar a viabilidade da implementação das metodologias e algoritmos propostos. Adicionalmente são apresentadas comparações das metodologias propostas relativamente aos resultados obtidos, complexidade de gestão em ambiente de simulação para as diferentes fases da ferramenta proposta e os benefícios e inconvenientes no uso da ferramenta proposta.

Localização Ótima de Aparelhos de Corte Normalmente Abertos e Normalmente Fechados em Redes de Distribuição

Tipicamente as redes elétricas de distribuição apresentam uma topologia parcialmente malhada e são exploradas radialmente. A topologia radial é obtida através da abertura das malhas nos locais que otimizam o ponto de operação da rede, através da instalação de aparelhos de corte que operam normalmente abertos. Para além de manterem a topologia radial, estes equipamentos possibilitam também a transferência de cargas entre saídas, aquando da ocorrência de defeitos. As saídas radiais são ainda dotadas de aparelhos de corte que operam normalmente fechados, estes têm como objetivo maximizar a fiabilidade e isolar defeitos, minimizando a área afetada pelos mesmos. Assim, na presente dissertação são desenvolvidos dois algoritmos determinísticos para a localização ótima de aparelhos de corte normalmente abertos e fechados, minimizando a potência ativa de perdas e o custo da energia não distribuída. O algoritmo de localização de aparelhos de corte normalmente abertos visa encontrar a topologia radial ótima que minimiza a potência ativa de perdas. O método é desenvolvido em ambiente Matlab – Tomlab, e é formulado como um problema de programação quadrática inteira mista. A topologia radial ótima é garantida através do cálculo de um trânsito de potências ótimo baseado no modelo DC. A função objetivo é dada pelas perdas por efeito de Joule. Por outro lado o problema é restringido pela primeira lei de Kirchhoff, limites de geração das subestações, limites térmicos dos condutores, trânsito de potência unidirecional e pela condição de radialidade. Os aparelhos de corte normalmente fechados são localizados ao longo das saídas radiais obtidas pelo anterior algoritmo, e permite minimizar o custo da energia não distribuída. No limite é possível localizar um aparelho de corte normalmente fechado em todas as linhas de uma rede de distribuição, sendo esta a solução que minimiza a energia não distribuída. No entanto, tendo em conta que a cada aparelho de corte está associado um investimento, é fundamental encontrar um equilíbrio entre a melhoria de fiabilidade e o investimento. Desta forma, o algoritmo desenvolvido avalia os benefícios obtidos com a instalação de aparelhos de corte normalmente fechados, e retorna o número e a localização dos mesmo que minimiza o custo da energia não distribuída. Os métodos apresentados são testados em duas redes de distribuição reais, exploradas com um nível de tensão de 15 kV e 30 kV, respetivamente. A primeira rede é localizada no distrito do Porto e é caraterizada por uma topologia mista e urbana. A segunda rede é localizada no distrito de Bragança e é caracterizada por uma topologia maioritariamente aérea e rural.

Models and algorithms for the capacitated location-routing problem

Le problème de localisation-routage avec capacités (PLRC) apparaît comme un problème clé dans la conception de réseaux de distribution de marchandises. Il généralisele problème de localisation avec capacités (PLC) ainsi que le problème de tournées de véhicules à multiples dépôts (PTVMD), le premier en ajoutant des décisions liées au routage et le deuxième en ajoutant des décisions liées à la localisation des dépôts. Dans cette thèse on dévelope des outils pour résoudre le PLRC à l’aide de la programmation mathématique. Dans le chapitre 3, on introduit trois nouveaux modèles pour le PLRC basés sur des flots de véhicules et des flots de commodités, et on montre comment ceux-ci dominent, en termes de la qualité de la borne inférieure, la formulation originale à deux indices [19]. Des nouvelles inégalités valides ont été dévelopées et ajoutées aux modèles, de même que des inégalités connues. De nouveaux algorithmes de séparation ont aussi été dévelopés qui dans la plupart de cas généralisent ceux trouvés dans la litterature. Les résultats numériques montrent que ces modèles de flot sont en fait utiles pour résoudre des instances de petite à moyenne taille. Dans le chapitre 4, on présente une nouvelle méthode de génération de colonnes basée sur une formulation de partition d’ensemble. Le sous-problème consiste en un problème de plus court chemin avec capacités (PCCC). En particulier, on utilise une relaxation de ce problème dans laquelle il est possible de produire des routes avec des cycles de longueur trois ou plus. Ceci est complété par des nouvelles coupes qui permettent de réduire encore davantage le saut d’intégralité en même temps que de défavoriser l’apparition de cycles dans les routes. Ces résultats suggèrent que cette méthode fournit la meilleure méthode exacte pour le PLRC. Dans le chapitre 5, on introduit une nouvelle méthode heuristique pour le PLRC. Premièrement, on démarre une méthode randomisée de type GRASP pour trouver un premier ensemble de solutions de bonne qualité. Les solutions de cet ensemble sont alors combinées de façon à les améliorer. Finalement, on démarre une méthode de type détruir et réparer basée sur la résolution d’un nouveau modèle de localisation et réaffectation qui généralise le problème de réaffectaction [48].

Droit du transport intermodal international de marchandises : une perspective « supply chain management ».

La thèse propose d’introduire une perspective globale dans le traitement juridique du transport intermodal international qui prendrait racine dans la stratégie logistique des entreprises. La conception juridique se heurte, en effet, aux évolutions opérationnelles et organisationnelles des transports et aboutit à une incertitude juridique. Les transporteurs ont dû s’adapter aux exigences d’optimisation des flux des chargeurs dont les modes de production et de distribution reposent sur le supply chain management (SCM). Ce concept est le fruit de la mondialisation et des technologies de l’information. La concurrence induite par la mondialisation et le pilotage optimal des flux ont impulsé de nouvelles stratégies de la part des entreprises qui tentent d’avoir un avantage concurrentiel sur le marché. Ces stratégies reposent sur l’intégration interfonctionnelle et interoganisationnelle. Dans cette chaîne logistique globale (ou SCM) l’intermodal est crucial. Il lie et coordonne les réseaux de production et de distribution spatialement désagrégés des entreprises et, répond aux exigences de maîtrise de l’espace et du temps, à moindre coût. Ainsi, le transporteur doit d’une part, intégrer les opérations de transport en optimisant les déplacements et, d’autre part, s’intégrer à la chaîne logistique du client en proposant des services de valeur ajoutée pour renforcer la compétitivité de la chaîne de valeur. Il en découle une unité technique et économique de la chaîne intermodale qui est pourtant, juridiquement fragmentée. Les Conventions internationales en vigueur ont été élaborées pour chaque mode de transport en faisant fi de l’interaction entre les modes et entre les opérateurs. L’intermodal est considéré comme une juxtaposition des modes et des régimes juridiques. Ce dépeçage juridique contraste avec la gestion de la chaîne intermodale dont les composantes individuelles s’effacent au profit de l’objectif global à atteindre. L’on expose d’abord l’ampleur de l’incertitude juridique due aux difficultés de circonscrire le champ d’opérations couvert par les Conventions en vigueur. Une attention est portée aux divergences d’interprétations qui débouchent sur la « désunification » du droit du transport. On s’intéresse ensuite aux interactions entre le transport et la chaîne logistique des chargeurs. Pour cela, on retrace l’évolution des modes de production et de distribution de ces derniers. C’est effectivement de la stratégie logistique que découle la conception de la chaîne intermodale. Partant de ce système, on identifie les caractéristiques fondamentales de l’intermodal. La thèse aboutit à dissiper les confusions liées à la qualification de l’intermodal et qui sont à la base des divergences d’interprétations et de l’incertitude juridique. De plus, elle met en exergue l’unité économique du contrat de transport intermodal qui devrait guider la fixation d’un régime de responsabilité dédié à ce système intégré de transport. Enfin, elle initie une approche ignorée des débats juridiques.

Angepasste Kommunikationssysteme für den effizienten Einsatz in dezentralen elektrischen Versorgungsstrukturen

Angepasste Kommunikationssysteme für den effizienten Einsatz in dezentralen elektrischen Versorgungsstrukturen - In öffentlichen Elektrizitätsnetzen wird der Informationsaustausch seit längerem durch historisch gewachsene und angepasste Systeme erfolgreich bewerkstelligt. Basierend auf einem weiten Erfahrungsspektrum und einer gut ausgebauten Kommunikationsinfrastruktur stellt die informationstechnische Anbindung eines Teilnehmers im öffentlichen Versorgungsnetz primär kein Hemmnis dar. Anders gestaltet sich dagegen die Situation in dezentralen Versorgungsstrukturen. Da die Elektrifizierung von dezentralen Versorgungsgebieten, mittels der Vernetzung vieler verteilter Erzeugungsanlagen und des Aufbaus von nicht an das öffentliche Elektrizitätsnetz angeschlossenen Verteilnetzen (Minigrids), erst in den letzten Jahren an Popularität gewonnen hat, sind nur wenige Projekte bis dato abgeschlossen. Für die informationstechnische Anbindung von Teilnehmern in diesen Strukturen bedeutet dies, dass nur in einem sehr begrenzten Umfang auf Erfahrungswerte bei der Systemauswahl zurückgegriffen werden kann. Im Rahmen der Dissertation ist deshalb ein Entscheidungsfindungsprozess (Leitfaden für die Systemauswahl) entwickelt worden, der neben einem direkten Vergleich von Kommunikationssystemen basierend auf abgeleiteten Bewertungskriterien und Typen, der Reduktion des Vergleichs auf zwei Systemwerte (relativer Erwartungsnutzenzuwachs und Gesamtkostenzuwachs), die Wahl eines geeigneten Kommunikationssystems für die Applikation in dezentralen elektrischen Versorgungsstrukturen ermöglicht. In Anlehnung an die klassische Entscheidungstheorie werden mit der Berechnung eines Erwartungsnutzens je Kommunikationssystems, aus der Gesamtsumme der Einzelprodukte der Nutzwerte und der Gewichtungsfaktor je System, sowohl die technischen Parameter und applikationsspezifischen Aspekte, als auch die subjektiven Bewertungen zu einem Wert vereint. Mit der Ermittlung der jährlich erforderlichen Gesamtaufwendungen für ein Kommunikationssystem bzw. für die anvisierten Kommunikationsaufgaben, in Abhängigkeit der Applikation wird neben dem ermittelten Erwartungsnutzen des Systems, ein weiterer Entscheidungsparameter für die Systemauswahl bereitgestellt. Die anschließende Wahl geeigneter Bezugsgrößen erlaubt die Entscheidungsfindung bzgl. der zur Auswahl stehenden Systeme auf einen Vergleich mit einem Bezugssystem zurückzuführen. Hierbei sind nicht die absoluten Differenzen des Erwartungsnutzen bzw. des jährlichen Gesamtaufwandes von Interesse, sondern vielmehr wie sich das entsprechende System gegenüber dem Normal (Bezugssystem) darstellt. Das heißt, der relative Zuwachs des Erwartungsnutzen bzw. der Gesamtkosten eines jeden Systems ist die entscheidende Kenngröße für die Systemauswahl. Mit dem Eintrag der berechneten relativen Erwartungsnutzen- und Gesamtkostenzuwächse in eine neu entwickelte 4-Quadranten-Matrix kann unter Berücksichtigung der Lage der korrespondierenden Wertepaare eine einfache (grafische) Entscheidung bzgl. der Wahl des für die Applikation optimalsten Kommunikationssystems erfolgen. Eine exemplarisch durchgeführte Systemauswahl, basierend auf den Analyseergebnissen von Kommunikationssystemen für den Einsatz in dezentralen elektrischen Versorgungsstrukturen, veranschaulicht und verifiziert die Handhabung des entwickelten Konzeptes. Die abschließende Realisierung, Modifikation und Test des zuvor ausgewählten Distribution Line Carrier Systems unterstreicht des Weiteren die Effizienz des entwickelten Entscheidungsfindungsprozesses. Dem Entscheidungsträger für die Systemauswahl wird insgesamt ein Werkzeug zur Verfügung gestellt, das eine einfache und praktikable Entscheidungsfindung erlaubt. Mit dem entwickelten Konzept ist erstmals eine ganzheitliche Betrachtung unter Berücksichtigung sowohl der technischen und applikationsspezifischen, als auch der ökonomischen Aspekte und Randbedingungen möglich, wobei das Entscheidungsfindungskonzept nicht nur auf die Systemfindung für dezentrale elektrische Energieversorgungsstrukturen begrenzt ist, sondern auch bei entsprechender Modifikation der Anforderungen, Systemkenngrößen etc. auf andere Applikationsanwendungen übertragen werden.

A hybrid method for sag source location in power network

The work presented in this paper belongs to the power quality knowledge area and deals with the voltage sags in power transmission and distribution systems. Propagating throughout the power network, voltage sags can cause plenty of problems for domestic and industrial loads that can financially cost a lot. To impose penalties to responsible party and to improve monitoring and mitigation strategies, sags must be located in the power network. With such a worthwhile objective, this paper comes up with a new method for associating a sag waveform with its origin in transmission and distribution networks. It solves this problem through developing hybrid methods which hire multiway principal component analysis (MPCA) as a dimension reduction tool. MPCA reexpresses sag waveforms in a new subspace just in a few scores. We train some well-known classifiers with these scores and exploit them for classification of future sags. The capabilities of the proposed method for dimension reduction and classification are examined using the real data gathered from three substations in Catalonia, Spain. The obtained classification rates certify the goodness and powerfulness of the developed hybrid methods as brand-new tools for sag classification