Furnishing a Globalized World: Local Distinctiveness in the International Furniture Industry

Advances in technology, communication, and transportation over the past thirty years have led to tighter linkages and enhanced collaboration across traditional borders between nations, institutions, and cultures. This thesis uses the furniture industry as a lens to examine the impacts of globalization on individual countries and companies as they interact on an international scale. Using global value chain analysis and international trade data, I break down the furniture production process and explore how countries have specialized in particular stages of production to differentiate themselves from competitors and maximize the benefits of global involvement. Through interviews with company representatives and evaluation of branding strategies such as advertisements, webpages, and partnerships, I investigate across four country cases how furniture companies construct strong brands in an effort to stand out as unique to consumers with access to products made around the globe. Branding often serves to highlight distinctiveness and associate companies with national identities, thus revealing that in today’s globalized and interconnected society, local differences and diversity are more significant than ever.

Decision support systems for eco-friendly electronic products

This paper discusses an optimisation based decision support system and methodology for electronic packaging and product design and development which is capable of addressing in efficient manner specified environmental, reliability and cost requirements. A study which focuses on the design of a flip-chip package is presented. Different alternatives for the design of the flip-chip package are considered based on existing options for the applied underfill and volume of solder material used to form the interconnects. Variations in these design input parameters have simultaneous effect on package aspects such as cost, environmental impact and reliability. A decision system for the design of the flip-chip that uses numerical optimisation approach is used to identify the package optimal specification which satisfies the imposed requirements. The reliability aspect of interest is the fatigue of solder joints under thermal cycling. Transient nonlinear finite element analysis (FEA) is used to simulate the thermal fatigue damage in solder joints subject to thermal cycling. Simulation results are manipulated within design of experiments and response surface modelling framework to provide numerical model for reliability which can be used to quantify the package reliability. Assessment of the environmental impact of the package materials is performed by using so called Toxic Index (TI). In this paper we demonstrate the evaluation of the environmental impact only for underfill and lead-free solder materials. This evaluation is based on the amount of material per flip-chip package. Cost is the dominant factor in contemporary flip-chip packaging industry. In the optimisation based decision support system for the design of the flip-chip package, cost of materials which varies as a result of variations in the design parameters is considered.

Mycobacterium avium ssp. paratuberculosis: its incidence, heat resistance and detection in milk and dairy products

Mycobacterium avium ssp. paratuberculosis (MAP) causes Johne's disease in cattle and other ruminants and has been implicated as a possible cause of Crohn's disease in humans. The organism gains access to raw milk directly through excretion into the milk within the udder and indirectly through faecal contamination during milking. MAP has been shown to survive commercial pasteurization in naturally infected milk, even at the extended holding time of 25 s. Pasteurized milk must therefore be considered a vehicle of transmission of MAP to humans. isolation methods for MAP from milk are problematical, chiefly because of the absence of a suitable selective medium. This makes food surveillance programs and research on this topic difficult. The MAP problem can be addressed in two main ways: by devising a milk-processing strategy that ensures the death of the organism: and/or strategies at farm level to prevent access of the organism into raw milk. Much of the research to date has been devoted to determining ifa problem exists and, if so, the extent of the problem. Little has been directed at possible solutions. Given the current state of information on this topic and the potential consequences for the dairy industry research is urgently needed so that a better understanding of the risks and the efficacy of possible processing solutions can be determined.

Exploring the dilemma of local sourcing versus international development – the case of the flower industry

This paper examines the debate surrounding local versus international sourcing of retail products, particularly food and flowers, in light of the emerging carbon imperative. It begins by examining the Fairtrade market and then examines food miles and carbon impact. The complexity of sourcing decisions when considering both international development issues and the emerging carbon agenda is considered using the case of the cut flower industry

Dynamic pricing model and algorithm for perishable products with fuzzy demand (ABS 2* Journal)

This paper studies the dynamic pricing problem of selling fixed stock of perishable items over a finite horizon, where the decision maker does not have the necessary historic data to estimate the distribution of uncertain demand, but has imprecise information about the quantity demand. We model this uncertainty using fuzzy variables. The dynamic pricing problem based on credibility theory is formulated using three fuzzy programming models, viz.: the fuzzy expected revenue maximization model, a-optimistic revenue maximization model, and credibility maximization model. Fuzzy simulations for functions with fuzzy parameters are given and embedded into a genetic algorithm to design a hybrid intelligent algorithm to solve these three models. Finally, a real-world example is presented to highlight the effectiveness of the developed model and algorithm.

Use of recycled demolition aggregate in precast products, phase II: Concrete paving blocks

A study undertaken at the University of Liverpool has investigated the potential for using construction and demolition waste (C&DW) as aggregate in the manufacture of a range of precast concrete products, i.e. building and paving blocks and pavement flags. Phase II, which is reported here, investigated concrete paving blocks. Recycled demolition aggregate can be used to replace newly quarried limestone aggregate, usually used in coarse (6 mm) and fine (4 mm-to-dust) gradings. The first objective, as was the case with concrete building blocks, was to replicate the process used by industry in fabricating concrete paving blocks in the laboratory. The compaction technique used involved vibration and pressure at the same time, i.e. a vibro-compaction technique. An electric hammer used previously for building blocks was not sufficient for adequate compaction of paving blocks. Adequate compaction could only be achieved by using the electric hammer while the specimens were on a vibrating table. The experimental work involved two main series of tests, i.e. paving blocks made with concrete- and masonry-derived aggregate. Variables that were investigated were level of replacement of (a) coarse aggregate only, (b) fine aggregate only, and (c) both coarse and fine aggregate. Investigation of mechanical properties, i.e. compressive and tensile splitting strength, of paving blocks made with recycled demolition aggregate determined levels of replacement which produced similar mechanical properties to paving blocks made with newly quarried aggregates. This had to be achieved without an increase in the cement content. The results from this research programme indicate that recycled demolition aggregate can be used for this new higher value market and therefore may encourage demolition contractors to develop crushing and screening facilities for this. (C) 2011 Published by Elsevier Ltd.

The use of recycled demolition aggregate in precast concrete products – Phase III: Concrete pavement flags

A study undertaken at the University of Liverpool has investigated the potential for using construction and demolition waste (C&DW) derived aggregate in the manufacture of a range of precast concrete products, i.e. building and paving blocks and pavement flags. Phase III, which is reported here, investigated
concrete pavement flags. This was subsequent to studies on building and paving blocks. Recycled demolition aggregate can be used to replace newly quarried limestone aggregate, usually used in coarse (6 mm) and fine (4 mm-to-dust) gradings. The first objective was, as was the case with concrete building
and paving blocks, to replicate the process used by industry in fabricating concrete pavement flags in the laboratory. The ‘‘wet’’ casting technique used by industry for making concrete flags requires a very workable mix so that the concrete flows into the mould before it is compressed. Compression squeezes out water from the top as well as the bottom of the mould. This industrial casting procedure was successfully replicated in the laboratory by using an appropriately modified cube crushing machine and a special mould typical of what is used by industry. The mould could be filled outside of the cube crushing machine and then rolled onto a steel frame and into the machine for it to be compressed. The texture and mechanical properties of the laboratory concrete flags were found to be similar to the factory ones. The experimental work involved two main series of tests, i.e. concrete flags made with concrete- and
masonry-derived aggregate. Investigation of flexural strength was required for concrete paving flags. This is different from building blocks and paving blocks which required compressive and tensile splitting strength respectively. Upper levels of replacement with recycled demolition aggregate were determined
that produced similar flexural strength to paving flags made with newly quarried aggregates, without requiring an increase in the cement content. With up to 60% of the coarse or 40% of the fine fractions replaced with concrete-derived aggregates, the target mean flexural strength of 5.0 N/mm2 was still
achieved at the age of 28 days. There was similar detrimental effect by incorporating the fine masonry-derived aggregate. A replacement level of 70% for coarse was found to be satisfactory and also conservative. However, the fine fraction replacement could only be up to 30% and even reduced to 15% when used for mixes where 60% of the coarse fraction was also masonry-derived aggregate.

Chemical Exposures of Women Workers in the Plastics Industry with Particular Reference to Breast Cancer and Reproductive Hazards.

Despite concern about the harmful effects of substances contained in various
plastic consumer products, little attention has focused on the more heavily
exposed women working in the plastics industry. Through a review of the
toxicology, industrial hygiene, and epidemiology literatures in conjunction
with qualitative research, this article explores occupational exposures in producing
plastics and health risks to workers, particularly women, who make up
a large part of the workforce. The review demonstrates that workers are
exposed to chemicals that have been identified as mammary carcinogens and
endocrine disrupting chemicals, and that the work environment is heavily
contaminated with dust and fumes. Consequently, plastics workers have a
body burden that far exceeds that found in the general public.

Wear analysis and prediction of the life of a riveting die used in the automotive industry

Knowledge on the life span of the riveting dies used in the automotive industry is sparse. It is often the case that only when faulty products are produced are workers aware that their tool needs to be changed. This is of course costly both in terms of time and money. Responding to this challenge, this paper proposes a methodology which integrates wear and stress analysis to quantify the life of a riveting die. Experiments are carried out to measure the applied load required to split a rivet. The obtained results (i.e. force curves) are used to validate the wear mechanisms of the die observed using scanning electron microscopy. Sliding, impact, and adhesive wears are observed on the riveting die after a certain number of riveting cycles. The stress distribution on the die during riveting is simulated using a finite element (FE) approach. In order to confirm the accuracy of the FE model, the experimental force results are compared with the ones produced from FE simulation. The maximum and minimum von Mises' stresses generated from the FE model are input into a Goodman diagram and an S-N curve to compute the life of the riveting die. It is found that the riveting die is predicted to run for 4 980 000 cycles before failure.

Cement As a Waste Form for Nuclear Fission Products: The Case of 90Sr and Its Daughters

One of the main challenges faced by the nuclear industry is the long-term confinement of nuclear waste. Because it is inexpensive and easy to manufacture, cement is the material of choice to store large volumes of radioactive materials, in particular the low-level medium-lived fission products. It is therefore of utmost importance to assess the chemical and structural stability of cement containing radioactive species. Here, we use ab initio calculations based on density functional theory (DFT) to study the effects of ⁹⁰Sr insertion and decay in C-S-H (calcium-silicate-hydrate) in order to test the ability of cement to trap and hold this radioactive fission product and to investigate the consequences of its β-decay on the cement paste structure. We show that ⁹⁰Sr is stable when it substitutes the Ca²⁺ ions in C-S-H, and so is its daughter nucleus ⁹⁰Y after β-decay. Interestingly, ⁹⁰Zr, daughter of ⁹⁰Y and final product in the decay sequence, is found to be unstable compared to the bulk phase of the element at zero K but stable when compared to the solvated ion in water. Therefore, cement appears as a suitable waste form for ⁹⁰Sr storage.

Strategic management in the Telecom industry to create competitive advantage

O presente trabalho teve por objetivos a identificação de uma estratégia e o desenvolvimento de um modelo que permita às operadoras de telecomunicações a sua sustentabilidade, bem como a identificação de caminhos para a adaptação a uma realidade sempre em mudança como é a da indústria das telecomunicações. Numa primeira parte do trabalho elaborou-se uma revisão de literatura do atual estado da arte das principais estratégias relevantes e com aplicação à indústria de telecomunicações. A pesquisa realizada investigou a estrutura atual da indústria de telecomunicações e o estado da competitividade das operadoras de telecomunicações. Dos resultados desta foi possível constatar uma evolução constante da tecnologia e dos modelos de negócio neste ecossistema, assim como a presença de uma pressão concorrencial significativa exercida sobre as operadoras, quer por parte das empresas já existentes no mercado quer por parte das emergentes. As operadoras têm de transformar o seu modelo de rede e de negócios para se adaptarem às mudanças e às tendências da indústria e do mercado. Com base na revisão de literatura, elegeu-se a metodologia baseada num inquérito de pesquisa empírica para aferir o estado da indústria e derivar as estratégias possíveis. Este inquérito foi efetuado a especialistas da área de telecomunicações de diferentes subsectores e países para abordar todos os elementos estratégicos do modelo de negócio futuro. Os resultados da pesquisa revelaram que as empresas que operam no mercado da Internet (Over The Top - OTT) representam a maior ameaça sobre o futuro dos operadores de telecomunicações. Os operadores só vão conseguir responder através da modernização de sua rede, melhorando a qualidade, reduzindo o custo global, e investindo em produtos inovadores e diferenciados e em serviços. Os resultados do inquérito revelam-se de acordo com os pressupostos da Blue Ocean Strategy. A aplicabilidade da Blue Ocean Strategy foi aprofundada permitindo concluir que o valor inovador obtido simultaneamente através da redução de custos e da diferenciação permitem aumentar as vantagens dos operadores existentes em termos das infra-estruturas físicas detidas e das relações estabelecidas com os clientes. O caso particular da fibra óptica até casa (FTTH) foi considerado como aplicação da Blue Ocean Strategy a uma nova tecnologia que as operadoras podem implementar para criar novas soluções e abrir segmentos de mercado inexplorados. Os resultados do inquérito e da investigação realizada à aplicação da Blue Ocean Strategy foram combinados para propor um novo modelo de negócio para as operadoras de telecomunicações que lhes permite, não só responder aos desafios existentes, mas, também, ter uma melhor posição competitiva no futuro. Foi, ainda, realizado um estudo de caso que destacou como a Verizon Communications foi capaz de transformar a sua rede e o modelo de negócio em resposta ao aumento da pressão competitiva. Através do valor da inovação transferida aos seus clientes, a Verizon foi capaz de aumentar significativamente as suas receitas e satisfação do cliente.

Bioethanol production from a sub-product of pulping industry

A vida da sociedade atual é dependente dos recursos fósseis, tanto a nível de energia como de materiais. No entanto, tem-se verificado uma redução das reservas destes recursos, ao mesmo tempo que as necessidades da sociedade continuam a aumentar, tornando cada vez mais necessárias, a produção de biocombustíveis e produtos químicos. Atualmente o etanol é produzido industrialmente a partir da cana-de-açúcar e milho, matérias-primas usadas na alimentação humana e animal. Este fato desencadeou o aumento de preços dos alimentos em todo o mundo e, como consequência, provocou uma série de distúrbios sociais. Os subprodutos industriais, recursos independentes das cadeias alimentares, têm-se posicionado como fonte de matérias-primas potenciais para bioprocessamento. Neste sentido, surgem os subprodutos gerados em grande quantidade pela indústria papeleira. Os licores de cozimento da madeira ao sulfito ácido (SSLs) são uma matériaprima promissora, uma vez que durante este processo os polissacarídeos da madeira são hidrolisados originando açúcares fermentáveis. A composição dos SSLs varia consoante o tipo de madeira usada no processo de cozimento (de árvores resinosas, folhosas ou a mistura de ambas). O bioprocessamento do SSL proveniente de folhosas (HSSL) é uma metodologia ainda pouco explorada. O HSSL contém elevadas concentrações de açúcares (35-45 g.L-1), na sua maioria pentoses. A fermentação destes açúcares a bioetanol é ainda um desafio, uma vez que nem todos os microrganismos são capazes de fermentar as pentoses a etanol. De entre as leveduras capazes de fermentar naturalmente as pentoses, destaca-se a Scheffersomyces stipitis, que apresenta uma elevada eficiência de fermentação. No entanto, o HSSL contém também compostos conhecidos por inibirem o crescimento de microrganismos, dificultando assim o seu bioprocessamento. Neste sentido, o principal objetivo deste trabalho foi a produção de bioetanol pela levedura S. stipitis a partir de HSSL, resultante do cozimento ao sulfito ácido da madeira de Eucalyptus globulus. Para alcançar este objetivo, estudaram-se duas estratégias de operação diferentes. Em primeiro lugar estudou-se a bio-desintoxicação do HSSL com o fungo filamentoso Paecilomyces variotii, conhecido por crescer em resíduos industriais. Estudaram-se duas tecnologias fermentativas diferentes para a biodesintoxicação do HSSL: um reator descontínuo e um reator descontínuo sequencial (SBR). A remoção biológica de inibidores do HSSL foi mais eficaz quando se usou o SBR. P. variotii assimilou alguns inibidores microbianos como o ácido acético, o ácido gálico e o pirogalol, entre outros. Após esta desintoxicação, o HSSL foi submetido à fermentação com S. stipitis, na qual foi atingida a concentração máxima de etanol de 2.36 g.L-1 com um rendimento de 0.17 g.g-1. P. variotti, além de desintoxicar o HSSL, também é útil na produção de proteína microbiana (SCP) para a alimentação animal pois, a sua biomassa é rica em proteína. O estudo da produção de SCP por P. variotii foi efetuado num SBR com HSSL sem suplementos e suplementado com sais. A melhor produção de biomassa foi obtida no HSSL sem adição de sais, tendo-se obtido um teor de proteína elevado (82,8%), com uma baixa concentração de DNA (1,1%). A proteína continha 6 aminoácidos essenciais, mostrando potencial para o uso desta SCP na alimentação animal e, eventualmente, em nutrição humana. Assim, a indústria papeleira poderá integrar a produção de bioetanol após a produção SCP e melhorar a sustentabilidade da indústria de pastas. A segunda estratégia consistiu em adaptar a levedura S. stipitis ao HSSL de modo a que esta levedura conseguisse crescer e fermentar o HSSL sem remoção de inibidores. Operou-se um reator contínuo (CSTR) com concentrações crescentes de HSSL, entre 20 % e 60 % (v/v) durante 382 gerações em HSSL, com uma taxa de diluição de 0.20 h-1. A população adaptada, recolhida no final do CSTR (POP), apresentou uma melhoria na fermentação do HSSL (60 %), quando comparada com a estirpe original (PAR). Após esta adaptação, a concentração máxima de etanol obtida foi de 6.93 g.L-1, com um rendimento de 0.26 g.g-1. POP possuía também a capacidade de metabolizar, possivelmente por ativação de vias oxidativas, compostos derivados da lenhina e taninos dissolvidos no HSSL, conhecidos inibidores microbianos. Por fim, verificou-se também que a pré-cultura da levedura em 60 % de HSSL fez com que a estirpe PAR melhorasse o processo fermentativo em HSSL, em comparação com o ensaio sem pré-cultura em HSSL. No entanto, no caso da estirpe POP, o seu metabolismo foi redirecionado para a metabolização dos inibidores sendo que a produção de etanol decresceu.

A value chain analysis of tuna industry in Ghana

Every can of tuna purchased by the consumer has taken a long journey before reaching the supermarket shelves. For each can bought there is a lengthy process from sea to shelf. A large proportion of the tuna cans purchased in the European Union come all the way from West Africa; a developing region with a high dependency on fisheries. Amidst an ever-increasing demand for tuna products the global tuna fisheries are set to continue expanding, apparently one of the last natural resource based industries fit to do so in West Africa. Tuna is the biggest fisheries export and dominates the fisheries sector in Ghana, a country situated in West Africa. This thesis aims to understand how this globally important industrial fisheries functions in terms of procedures, practices, Governance and finance. Socioeconomic influences, in the setting of a developing country, were also examined. For these purposes a Value Chain Analysis was employed. A Value Chain Analysis is a tool commonly used to understand how different companies and organizations participate in a domestic policy environment, which directs conclusion in the global economy. This analysis has the potential to allow researchers to fully understand a commodity chain and hence identify realistic opportunities for consequential improvements. Interviews and questionnaires were employed in-field Ghana along with secondary data collection techniques. It was found that the fisheries functions at the production level under influences from large multinational companies and tends to operate with a certain degree of lawlessness. Governance over the value chain is well defined, however implementation is poor or non-existent. The processors, whom are also dominated by multinationals, exert some control over the producers and their sales, however the high value links which are highlighted occur at the retail stage. Socioeconomic dynamics acting in the chain included the lack of communication between the public and private sector, power imbalances amongst players at production, the role of local businesswomen as actors in the chain and the general characteristics of the workers in the industry. Value addition and upgrading are needed the most in Governance over the chain, especially within Monitoring, Control and Surveillance. The results of the study provide a wealth of material about the components of a cost-heavy fishing industry in a developing country; an industry on which many eyes have recently turned due to illegal fishing activities. It highlights clearly where funding and future focus are needed. This value chain can be used as a guide for those that need to comprehend the financial complexities and real life dynamics of the Ghanaian tuna fishing industry today.

Serving More Segments and Offering More Products: What Are the Costs and Where Are the Profits?

Making more money involves more than targeting new customer segments and offering new services.