Investigation of the impact of anthropogenic heat flux within an urban land surface model and PILPS-urban

Results from the first international urban model comparison experiment (PILPS-Urban) suggested that models which neglected the anthropogenic heat flux within the surface energy balance performed at least as well as models that include the source term, but this could not be explained. The analyses undertaken show that the results from PILPS-Urban were masked by the signal from including vegetation, which was identified in PILPS-Urban as being important. Including the anthropogenic heat flux does give improved performance, but the benefit is small for the site studied given the relatively small magnitude of this flux relative to other terms in the surface energy balance. However, there is no further benefit from including temporal variations in the flux at this site. The importance is expected to increase at sites with a larger anthropogenic heat flux and greater temporal variations.

NMR Chemical Shielding and Spin-Spin Coupling Constants of Liquid NH(3): A Systematic Investigation using the Sequential QM/MM Method

The NMR spin coupling parameters, (1)J(N,H) and (2)J(H,H), and the chemical shielding, sigma((15)N), of liquid ammonia are studied from a combined and sequential QM/MM methodology. Monte Carlo simulations are performed to generate statistically uncorrelated configurations that are submitted to density functional theory calculations. Two different Lennard-Jones potentials are used in the liquid simulations. Electronic polarization is included in these two potentials via an iterative procedure with and without geometry relaxation, and the influence on the calculated properties are analyzed. B3LYP/aug-cc-pVTZ-J calculations were used to compute the V(N,H) constants in the interval of -67.8 to -63.9 Hz, depending on the theoretical model used. These can be compared with the experimental results of -61.6 Hz. For the (2)J(H,H) coupling the theoretical results vary between -10.6 to -13.01 Hz. The indirect experimental result derived from partially deuterated liquid is -11.1 Hz. Inclusion of explicit hydrogen bonded molecules gives a small but important contribution. The vapor-to-liquid shifts are also considered. This shift is calculated to be negligible for (1)J(N,H) in agreement with experiment. This is rationalized as a cancellation of the geometry relaxation and pure solvent effects. For the chemical shielding, U(15 N) Calculations at the B3LYP/aug-pcS-3 show that the vapor-to-liquid chemical shift requires the explicit use of solvent molecules. Considering only one ammonia molecule in an electrostatic embedding gives a wrong sign for the chemical shift that is corrected only with the use of explicit additional molecules. The best result calculated for the vapor to liquid chemical shift Delta sigma((15)N) is -25.2 ppm, in good agreement with the experimental value of -22.6 ppm.

Trojan Horse Method: a useful tool for electron screening effect investigation

Direct measurements in the last decades have highlighted a new problem related to the lowering of the Coulomb barrier between the interacting nuclei due to the presence of the ""electron screening"" in the laboratory measurements. It was systematically observed that the presence of the electronic cloud around the interacting ions in measurements of nuclear reactions cross sections at astrophysical energies gives rise to an enhancement of the astrophysical S(E)-factor as lower and lower energies are explored [1]. Moreover, at present Such an effect is not well understood as the value of the potential for screening extracted from these measurements is higher than the tipper limit of theoretical predictions (adiabatic limit). On the other hand, the electron screening potential in laboratory measurement is different from that occurring in stellar plasmas thus the quantity of interest in astrophysics is the so-called ""bare nucleus cross section"". This quantity can only be extrapolated in direct measurements. These are the reasons that led to a considerable growth on interest in indirect measurement techniques and in particular the Trojan Horse Method (THM) [2,3]. Results concerning the bare nucleus cross sections measurements will be shown in several cases of astrophysical interest. In those cases the screening potential evaluated by means of the THM will be compared with the adiabatic limit and results arising from extrapolation in direct measurements.

Excited Electronic States, Transition Probabilities, and Radiative Lifetimes of CAs: A Theoretical Contribution and Challenge to Experimentalists

High-level CASSCF/MRCI calculations with a quintuple-zeta quality basis set are reported by characterizing for the first time a manifold of electronic states of the CAs radical yet to be investigated experimentally. Along with the potential energy curves and the associated spectroscopic constants, the dipole moment functions for selected electronic states as well as the transition dipole moment functions for the most relevant electronic transitions are also presented. Estimates of radiative transition probabilities and lifetimes complement this investigation, which also assesses the effect of spin-orbit interaction on the A (2)Pi state. Whenever pertinent, comparisons of similarities and differences with the isovalent CN and CP radicals are made.

Thick viewing : empirical examples of condensed moments of narrative impact in fiction film developing theoretical concepts for intensified engagements

Abstract  In a case study about viewing habits in a Swedish audience I sampled 309 questionnaires; interviews with five focus group were conducted together with ten in-depth individual interviews discussing altogether fifteen favorite films exploring specific scenes of idiosyncratic relevance.  The outcome supports claims about viewers as active and playful (cf. Höijer 1998, Frampton 2006, Hoover 2006, Plantinga 2009). In line with mediatization theory I also argue that spiritual meaning making takes place through mediated experiences and I support theories about fiction films as important sources for moral and spiritual reflection (Partridge 2004, Zillman 2005, Lynch 2007, Plantinga 2009). What Hjarvard calls the soft side of mediatization processes (2008) is illustrated showing adults experiencing enchantment through favorite films (Jerslev 2006, Partridge 2008, Klinger 2008, Oliver & Hartmann 2010).  Vernacular meaning making embedded in everyday life and spectators dealing with fiction narratives such as Gladiator, Amelie from Montmartre or Avatar highlights the need for a more nuanced understanding of elevated cinematic experiences. The reported impact of specific movies is analyzed through theories where cognition and affect are central aspects of spectators’ engagements with a film (Tan 1996, Caroll 1999, Grodal 2009). Crucially important are theories of meaning-making where viewers’ detailed interpretation of specific scenes are embedded in high-level meaning-making where world view issues and spectators’ moral frameworks are activated (Zillman 2005, Andersson & Andersson 2005, Frampton 2006, Lynch 2007, Avila 2007, Axelson 2008, Plantinga 2009).  Also results from a growing body of empirical oriented research in film studies are relevant with an interest in what happens with the flesh and blood spectator exposed to filmic narratives (Jerslev 2006, Klinger 2008, Barker 2009, Suckfüll 2010, Oliver & Hartmann 2010). Analyzing the qualitative results of my case study, I want to challenge the claim that the viewer has to suspend higher order reflective cognitive structures in order to experience suture (Butler & Palesh 2004). What I find in my empirical examples is responses related to spectators’ highest levels of mental activity, all anchored in the sensual-emotional apparatus (Grodal 2009). My outcome is in line with a growing number of empirical case studies which support conclusions that both thinking and behavior are affected by film watching (Marsh 2007, Sückfull 2010, Oliver & Hartmann 2010, Axelson forthcoming). The presentation contributes to a development of concepts which combines aesthetic, affective and cognitive components in an investigation of spectator’s moves from emotional evaluation of intra-text narration to extra-textual assessments, testing the narrative for larger significance in idiosyncratic ways (Bordwell & Thompson 1997, Marsh 2007, Johnston 2007, Bruun Vaage 2009, Axelson 2011). There are a several profitable concepts suggested to embrace the complex interplay between affects, cognition and emotions when individuals respond to fictional narratives. Robert K. Johnston label it “deepening gaze” (2007: 307) and “transformative viewing” (2007: 305). Philosopher Mitch Avila proposes “high cognition” (2007: 228) and Casper Thybjerg ”higher meaning” (2008: 60). Torben Grodal talks about “feelings of deep meaning” (Grodal 2009: 149). With a nod to Clifford Geertz, Craig Detweiler adopts “thick description” (2007: 47) as do Kutter Callaway altering it to ”thick interpretations” (Callaway 2013: 203).  Frampton states it in a paradox; ”affective intelligence” (Frampton 2006: 166). As a result of the empirical investigation, inspired by Geertz, Detweiler & Callaway, I advocate thick viewing for capturing the viewing process of these specific moments of film experience when profound and intensified emotional interpretations take place. The author As a sociologist of religion, Tomas Axelsons research deals with people’s use of mediated narratives to make sense of reality in a society characterized by individualization, mediatization and pluralized world views.  He explores uses of fiction film as a resource in every day life and he is currently finishing his three year project funded by the Swedish Research Council: Spectator engagement in film and utopian self-reflexivity. Moving Images and Moved Minds. http://www.du.se/sv/AVM/Personal/Tomas-Axelson Bibliography Axelson, T. (Forthcoming 2014). Den rörliga bildens förmåga att beröra.[1] Stockholm: Liber Axelson, T. (In peer review). Vernacular Meaning Making. Examples of narrative impact in fiction film questioning the ’banal’ notion in mediatization theory. Nordicom Review. Nordicom Göteborg. Axelson, T. (2011). Människans behov av fiktion. Den rörliga bildens förmåga att beröra människan på djupet.[2]Kulturella perspektiv. Volume 2. Article retrieved from www.kultmed.umu.se/digitalAssets/74/74304_axelson-22011.pdf Axelson, Tomas (2010) “Narration, Visualization and Mind. Movies in everyday life as a resource for utopian self-reflection.” Paper presentation at CMRC, 7th Conference of Media, Religion & Culture in Toronto, Canada 9 – 13th August 2010. Axelson, Tomas (2008) Movies and Meaning. Studying Audience, Favourite Films and Existential Matters. Particip@tions : Journal of Audience and Reception Studies. Volume 5, (1). Doctoral dissertation summary. ACTA UNIVERSITATIS UPSALIENSIS. Article retrieved from http://www.participations.org/Volume%205/Issue%201%20-%20special/5_01_axelson.htm  [1] English translation: Moving Images and Moved Minds. [2] English translation: Our need for fiction. Deeply Moved by Moving Images. Cultural Perspectives.

A scenario-driven decision support system for serious crime investigation

Consideration of a wide range of plausible crime scenarios during any crime investigation is important to seek convincing evidence and hence to minimize the likelihood of miscarriages of justice. It is equally important for crime investigators to be able to employ effective and efficient evidence-collection strategies that are likely to produce the most conclusive information under limited available resources. An intelligent decision support system that can assist human investigators by automatically constructing plausible scenarios, and reasoning with the likely best investigating actions will clearly be very helpful in addressing these challenging problems. This paper presents a system for creating scenario spaces from given evidence, based on an integrated application of techniques for compositional modelling and Bayesian network-based evidence evaluation. Methods of analysis are also provided by the use of entropy to exploit the synthesized scenario spaces in order to prioritize investigating actions and hypotheses. These theoretical developments are illustrated by realistic examples of serious crime investigation.

Innovation districts: an investigation of the replication of the 22@ Barcelona’s Model in Boston

In 2000, the city of Barcelona launched 22@ Barcelona, dubbed the innovation district. The city sees the project as a means to accelerate Barcelona’s transition toward the knowledge economy. Other cities around the world have since followed the example of Barcelona, building or planning to build their own innovation districts. Boston began to establish its innovation district in 2010. Cities’ ultimate goal for these initiatives is to become more innovative and thus more competitive. Innovative districts are different from technology parks in that they aim to respond to a new economic paradigm in which economic production flows back to cities. The 22@ Barcelona model involves theoretical designs regarding five layers of innovation: economics, urban planning, productive, innovative, and creative. The comparative approach between 22@ Barcelona and Boston’s Innovation District intends to highlight the similarities and differences between those two innovation districts as well as providing a framework to define innovation districts.

Fully Relativistic 4-Components DFT Investigation on Bonding and Dissociation Energy of HgO

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrochemical and theoretical evaluation of the interaction between dna and amodiaquine: evidence of the guanine adduct formation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

An investigation of metal oxides which are photoluminiscent at room temperature

Amorphous thin films, based on different network formers, were processed by a soft chemical process called the polymeric precursor method. The resultant amorphous metal oxides, displayed intense photoluminescence (PL) at room temperature. Heat treatment increases the PL intensity of these materials. Theoretical ab initio calculations are correlated with the observed experimental trends. (C) 2004 Elsevier B.V. All rights reserved.

Pb1-xCaxTiO3 solid solution (x=0.0, 0.25, 0.50, and 0.75): A theoretical and experimental approach

In this paper we report an experimental and theoretical study based on a periodic density functional investigation into selected compositions of Pb1-xCaxTiO3 (x=0.0, 0.25, 0.50, and 0.75). Based on our findings, we propose that the pseudocubic structure of these perovskites presents a long-range tendency for cubic symmetry, while the short-range displacements bring the solid solution to a tetragonal symmetry. The results are discussed in terms of x-ray diffraction, structural optimized parameters, Raman spectroscopy, band structure, density of states, Mulliken charge, and overlap population.

Quantum mechanical study of YTiO3 to the investigation of piezoelectricity

In previous articles we reported through theoretical studies the piezoelectric effect in BaTiO3, SmTiO3, and YFeO3. In this paper, we used the Douglas-Kroll-Hess (DKH) second-order scalar relativistic method to investigate the piezoelectricity in YTiO3. In the calculations we used the [6s4p] and [10s5p4d] Gaussian basis sets for the O (3P) and Ti (5S) atoms, respectively, from the literature in combination with the (30s21p16d)/[15s9p6d] basis set for the Y ( 3D) atom, obtained by generator coordinate Hartree-Fock (GCHF) method, and they had their quality evaluated using calculations of total energy and orbital energies (HOMO and HOMO-1) of the 2TiO+1 and 1YO+1 fragments. The dipole moment, the total energy, and the total atomic charges in YTiO3 in C s space group were calculated. When we analyze those properties we verify that it is reasonable to believe that YTiO3 does not present piezoelectric properties. Copyright © 2011 Raimundo Dirceu de Paula Ferreira et al.

The resistivity piezocone for high resolution geo-environmental site investigation: A Brazilian example

A suit able decision-making on managing a contaminated site characterization program is strongly dependent of the diagnosis process. A detailed diagnosis can be done based on a Conceptual Site Model (CSM) elaboration using high resolution site characterization tools. The piezocone (CPTu) test is a high resolution tool which allows attaching several specific sensors, like the resistivity probe. This hybrid device is called the resistivity piezocone (RCPTu). A simulated geo-environmental site characterization program was performed on an erosion site using different tools (direct push tools soil samplers, hollow stem auger (HSA) drilling and RCPTu tests) to develop the CSM for a site similar to the Brazilian conditions. It was observed a good agreement between the site profiles interpreted by the different methods. The resistivity sensor attached to the piezocone improved the interpretation and the decision-making process on site was significantly better for the CSM elaboration. The RCPTu test data also allowed identifying the hydrogeological heterogeneities. The present study shows that the RCPTu test is also a useful and powerful tool to development an accurate CSM in a Brazilian condition, especially in an approach that prioritizes high resolution geo-environmental investigation. © 2013 Taylor & Francis Group.

Convergence towards asymptotic state in 1-D mappings: a scaling investigation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

INVESTIGATION INTO CURRENT EFFICIENCY FOR PULSE ELECTROCHEMICAL MACHINING OF NICKEL ALLOY

INVESTIGATION INTO CURRENT EFFICIENCY FOR PULSE ELECTROCHEMICAL MACHINING OF NICKEL ALLOY Yu Zhang, M.S. University of Nebraska, 2010 Adviser: Kamlakar P. Rajurkar Electrochemical machining (ECM) is a nontraditional manufacturing process that can machine difficult-to-cut materials. In ECM, material is removed by controlled electrochemical dissolution of an anodic workpiece in an electrochemical cell. ECM has extensive applications in automotive, petroleum, aerospace, textile, medical, and electronics industries. Improving current efficiency is a challenging task for any electro-physical or electrochemical machining processes. The current efficiency is defined as the ratio of the observed amount of metal dissolved to the theoretical amount predicted from Faraday’s law, for the same specified conditions of electrochemical equivalent, current, etc [1]. In macro ECM, electrolyte conductivity greatly influences the current efficiency of the process. Since there is a certain limit to enhance the conductivity of the electrolyte, a process innovation is needed for further improvement in current efficiency in ECM. Pulse electrochemical machining (PECM) is one such approach in which the electrolyte conductivity is improved by electrolyte flushing in pulse off-time. The aim of this research is to study the influence of major factors on current efficiency in a pulse electrochemical machining process in macro scale and to develop a linear regression model for predicting current efficiency of the process. An in-house designed electrochemical cell was used for machining nickel alloy (ASTM B435) by PECM. The effects of current density, type of electrolyte, and electrolyte flow rate, on current efficiency under different experimental conditions were studied. Results indicated that current efficiency is dependent on electrolyte, electrolyte flow rate, and current density. Linear regression models of current efficiency were compared with twenty new data points graphically and quantitatively. Models developed were close enough to the actual results to be reliable. In addition, an attempt has been made in this work to consider those factors in PECM that have not been investigated in earlier works. This was done by simulating the process by using COMSOL software. However, it was found that the results from this attempt were not substantially different from the earlier reported studies.