Radiation crosslinking of biodegradable poly(butylene succinate) at high temperature

Poly(butylene succinate), (PBS) with different molecular weight was gamma -irradiated at different temperatures and various doses. PBS with high molecular weight and smaller peak area of crystal melting gave the highest gel content at the same temperatures and dose. A two-step irradiation (irradiation in molten state after irradiation at room temperature) gave the highest gel content in different conditions. This is due to the formation of network structure by pre-irradiation at room temperature that leads to less degradation. PBS prepared by two step irradiation was effective for improvement of heat stability because of high gel content formation. Unirradiated PBS sheets broke immediately at 110 degrees, while the irradiated sample (gel fraction, 50%) by a two step-method did not break even up to 200 minutes at 130 degreesC. The PBS sheets are biodegradable even after crosslinking.

Mechanical and structural characteristics of phenolphthalein poly(ether sulfone) ultra-high molecular weight polyethylene blends

Mechanical and structural properties of blends of phenolphthalein poly(ether sulfone) (PBS-C) with ultra-high molecular weight polyethylene (UHMWPE) were investigated using tensile and bending testing, scanning electron microscopy and transition electron microscopy. The incorporation of minor amounts of UHMWPE (2 wt.-%) into PES-C has a reinforcement effect. With higher concentrations of UHMWPE, the mechanical properties decrease gradually. Structural studies demonstrated that the blends are multiphasic in the whole composition range. The minor UHMWPE, dispersed uniformly and oriented along the flow direction, as well as the strong interfacial adhesion contribute to the increase of the mechanical performance of the blends. The domain size of the UHMWPE phase was found to increase with the increase of its concentration.

Protective immunity induced by CpG ODNs against white spot syndrome virus (WSSV) via intermediation of virus replication indirectly in Litopenaeus vannamei

The worldwide shrimp culture is beset with diseases mainly caused by white spot syndrome virus (WSSV) and suffered huge economic losses, which bring out an urgent need to develop the novel strategies to better protect shrimps against WSSV. In the present study, CpG-rich plasmid pUC57-CpG, plasmid pUC57 and PBS were employed to pretreat shrimps comparatively to evaluate the protective effects of CpG ODNs on shrimps against WSSV. The survival rates, WSSV copy numbers, and antiviral associated factors (Dicer, Argonaute, STAT and ROS) were detected in Litopenaeus vannamei. There were higher survival proportion, lower WSSV copy numbers, and higher mRNA expression of Dicer and STAT in pUC57-CpG-pretreatment shrimps than those in pUC57- and PBS-pretreatment shrimps after WSSV infection. The Argonaute mRNA expression in pUC57-CpG-, pUC57- and PBS-pretreatment shrimps after WSSV infection was significantly higher than that of shrimps post PBS stimulation on the first day. The ROS levels in pUC57-CpG-pretreatment shrimps post secondary stimulation of PBS were significantly higher than those post WSSV infection on the first day. These results together demonstrated that pUC57-CpG induced partial protective immunity in shrimps against WSSV via intermediation of virus replication indirectly and could be used as a potential candidate in the development of therapeutic agents for disease control of WSSV in L. vannamei. (C) 2009 Elsevier Ltd. All rights reserved.

Interaction between phycobilisomes from Porphyridium cruentum and thylakoid membranes from Gymnodinium sp or spinach

Thylakoid membranes were isolated from Gymnodinium sp. and spinach, whereas the phycobilisomes were isolated and purified from red alga Porphyridium cruentum. The absorption spectra of the purified phycobilisomes (PBS) showed three peaks at 548, 564, and 624 nm, respectively, and the ratio of the fluorescence intensity at the lambda(680)(em) to lambda(80)(em5) that at was about 7.3. All these results demonstrated that the purified PBS remained intact. The thylakoid membranes were incubated with the purified phycobilisomes, and the thylakoid membranes, which harbored the phycobilisomes, were purified by sucrose density gradient centrifugation. Meantime, the conjugates of phycobilisome-thylakoid membranes were constructed using glutaraldehyde and further purified. Their characteristics were studied by measuring the absorption spectra and fluorescence emission spectra. The results showed that the phycobilisomes from Porphyridium cruentum can attach to the thylakoid membranes from Gymnodinium sp. and spinach without covalent cross-linking, but the excited energy transfer did not occur. The conjugate of phycobilisome-thylakoid. membranes with covalent cross-linking exhibits the excited energy transfer between the phycobilisomes and the thylakoid membranes.

Characterization of the artificially covalent conjugate of B-phycoerythrin and R-phycocyanin and the phycobilisome from Porphyridium cruentum

B-phycoerythrin (BPE) and R-phycocyanin (RPC) were purified from Porphyridium cruentum by Sephadex G-200 chromatography, then the BPE was attached covalently to the RPC by reacting their amino groups to form the artificially covalent BPE-RPC conjugate in which the excitation energy can transfer from the BPE to the RPC with low efficiency. Meanwhile, the intact phycobilisome (PBS) consisting of BPE, RPC, APC and L-CM was isolated and purified from Porphyridium cruentum, and the purified PBS was found to keep intact if the solution contains sucrose. Comparison of spectroscopic properties between the purified PBS and the BPE-RPC conjugate suggests that the BPE-RPC conjugate is much more stable than the purified PBS. The construction of BPE-RPC conjugate with low efficiency of the excitation energy transfer may be useful for preparing phycobiliprotein probes. (C) 2002 Elsevier Science Ireland Ltd. All rights reserved.

A new model of phycobilisome in Spirulina platensis

Phycobilisomes (PBS) were isolated from blue-green alga Spirulina platensis. Scanning tunneling microscope was used to investigate the three-dimensional structure of PBS deposited on freshly cleaved highly oriented pyrolytic graphite (HOPG) in ambient condition at room temperature. The results showed that the rods of PBS radiated from the core to different directions in the space other than arrayed in one plane, which was different from the typical hemi-discoidal model structure. The diameter of PBS was up to 70 nm, and the rod was approximately 50 nm in length. Similar results were observed in Langmuir-Blodgett (LB) film of PBS. The dissociated PBS could reaggregate into rod-like structures and easily form two-dimensional membrane while being absorbed on HOPG, however, no intact PBS was observed. The filling-space model structure of PBS in Spirulina platensis with STM from three-dimensional real space at nanometer scale was found, which showed that this new structural model of PBS surely exists in blue-green algae and red algae. The function of this structural model of PBS was also discussed.

Spectroscopic properties of the C-phycocyanin-allophycocyanin conjugate and the isolated phycobilisomes from Spirulina platensis

C-phycocyanin (CPC) and allophycocyanin (APC) were purified from Spirulina platensis, then the CPC was attached covalently to the APC by reacting their epsilon-amino groups. The excitation energy could be transferred from the CPC to the APC in the CPC-APC conjugate. Intact phycobilisomes (PBS), consisting of CPC, APC, colourless linker polypeptides, and APC B or L-cm, were isolated from S. platensis. Spectroscopic properties of the isolated PBSs kept at 20 degrees C for various times showed that the connection between the APC and the APC B or L-cm was looser than that between the CPC and the APC in the isolated PBSs. The CPC-APC conjugate was more stable than the isolated PBSs, and the linker polypeptides had a minor influence on the excitation energy transfer characteristic between different phycobiliproteins in the PBS.

两种大型水母毒素的分离纯化及其蛋白酶活性和抗氧化活性的研究

水母在我国分布广，种类多，数量大，是一种丰富的海洋生物资源。已研究的水母毒素主要分布于触角和刺丝囊中，是一类结构新颖独特的肽类毒素。水母种类的不同，其毒素的结构、生物活性往往不同。本文首次报道了海蜇（Rhopilema esculentum Kishinouye）毒素 和白色霞水母（Cyanea nozakii Kishinouye）毒素的提取、纯化、理化性质及蛋白酶和抗氧化方面的生物学活性，主要结果如下： 1.用DEAE Sepharose Fast Flow分离海蜇毒素，用含0.4 mol/L NaCl 的PBS (0.02 M，pH 8.0) 进行阶段洗脱时，得到的组分是组蛋白H4。 2.水母毒素的蛋白酶活性实验结果为：海蜇毒素和白色霞水母毒素都有蛋白酶活性。该两种毒素的蛋白酶活性都受理化因素的影响，其中0.5%甘油和1%邻菲罗啉可以有效的抑制海蜇毒素的蛋白酶活性。 3.对海蜇毒素蛋白的体外抗氧化活性研究表明：蛋白样品均具有抗氧化性，它们对超氧阴离子和羟自由基具有显著的清除作用。对白色霞水母毒素蛋白的体外抗氧化活性研究表明：白色霞水母蛋白具有较高的清除羟自由基的能力，白色霞水母蛋白对超氧阴离子的清除作用较弱。白色霞水母蛋白有较强的还原能力，但没有螯合能力。 通过本文的研究表明水母毒素具有蛋白酶活性和抗氧化活性，能够清除氧自由基。这些研究结果为开发利用水母资源和毒素的合理、综合利用打下了坚实的基础。

扇贝丝氨酸蛋白酶抑制剂基因CfKZSPI及Aikunitz的克隆与重组表达

扇贝养殖是我国重要的海水养殖产业，然而自1997 年以来，养殖扇贝陆续爆发的大规模死亡，不但造成了巨大的经济损失，而且严重影响了该产业的健康发展。丝氨酸蛋白酶抑制因子及丝氨酸蛋白酶在无脊椎动物的免疫应答中起着核心作用，它们的协同作用直接导致外界病源入侵的信号转导和级联放大，并进一步激活一系列防御体系，如黑化反应、血液凝结和抗菌肽的合成等。因此，克隆扇贝参与免疫防御的丝氨酸蛋白酶抑制剂基因并对其功能进行研究，将有助于进一步研究扇贝的免疫防御机制，丰富和发展无脊椎动物免疫学的内容。 运用大规模EST技术和RACE技术从栉孔扇贝中克隆出一个Kazal型丝氨酸蛋白酶抑制剂基因，定名为CfKZSPI。该基因cDNA序列全长1788bp，其中5' 非编码区（Untranslated Region, UTR）为97 bp，3' UTR161 bp，有一个典型的多聚腺苷酸信号序列（AATAAA）和一个ploy A 尾巴，开放阅读框（Open Reading Frame, ORF）含有1530 bp，编码509 个氨基酸残基。对其推测氨基酸序列进行分析，发现其中包括22个氨基酸残基组成的信号肽序列和12个Kazal型丝氨酸蛋白酶抑制剂结构域。采用QRT-PCR（quantitative real time PCR）对鳗弧菌浸泡刺激后栉孔扇贝血淋巴中CfKZSPI 的 mRNA表达量进行了检测，发现其mRNA 的表达量在鳗弧菌刺激后3h明显上升，达到空白组的43.6倍；然后在6h时有所下降，为空白组的15.0倍；随着菌刺激时间的增长，CfKZSPI基因的 mRNA 表达量急剧增加，在刺激后8h，12h，24h分别达到空白组的174.1，207.8，675.4倍。统计分析发现3h（P=0.019<0.05）和12h（P=0.020<0.05）时，CfKZSPI基因mRNA表达量与空白组差异均显著。为了研究栉孔扇贝CfKZSPI的蛋白活性，将其第十二个结构域克隆到pET-32a（+）载体中，转化大肠杆菌Rosetta-gami（DE3）表达菌株，获得可溶性表达的蛋白rCfKZSPI-12，对其进行抑制蛋白酶活性的分析，发现其对胰蛋白酶有很强的抑制活性，而对凝血酶没有抑制活性。当rCfKZSPI-12与胰蛋白酶分子比率为1：1时，约90%的蛋白酶活性被抑制。运用狄更斯作图法研究rCfKZSPI-12对胰蛋白酶的抑制能力，结果发现其对胰蛋白酶的抑制常数为173 nmol L-1。 采用同样方法从海湾扇贝cDNA文库中克隆出一个Kunitz型丝氨酸蛋白酶抑制剂基因，定名为Aikunitz。该基因全长632 bp，其中5' UTR 为105 bp，3' UTR 为 245 bp，有一个典型的多聚腺苷酸信号序列（AATAAA）和一个ploy A 尾巴，ORF 含有282 bp，编码93 个氨基酸残基。推测的氨基酸序列N末端有一个20个氨基酸残基组成的信号肽序列，成熟蛋白包括一个Kunitz型丝氨酸蛋白酶抑制剂结构域。采用QRT-PCR对鳗弧菌和藤黄微球菌感染后海湾扇贝血淋巴中Aikunitz 的mRNA的表达量进行了检测，结果发现其在鳗弧菌刺激后3h到9h持续上升，9h时表达量为PBS对照组的4.49倍（P=0.008<0.05），然后开始下降，在72h时表达量为对照组的0.24倍（P=0.021<0.05）；而在藤黄微球菌刺激后3h到12h其表达量上升，其中6h时为空白组的5.95倍（P=0.0004<0.01）；12h以后迅速下降，其中24h的表达量为对照组的0.38倍（P=0.028<0.05）。将Aikunitz基因编码的成熟蛋白按照重组CfKZSPI-12的方法进行重组表达，并对重组蛋白进行抑制蛋白酶和抑菌活性分析。结果发现其对胰蛋白酶和弹性蛋白酶两种丝氨酸蛋白酶都没有抑制作用。抑菌实验同样发现，重组Aikunitz 对供试的革兰氏阳性菌藤黄微球菌和革兰氏阴性菌鳗弧菌和大肠杆菌都不显示明显抑菌活性。

Molecular characterization of chordoma xenografts generated from a novel primary chordoma cell source and two chordoma cell lines.

OBJECT: Chordoma cells can generate solid-like tumors in xenograft models that express some molecular characteristics of the parent tumor, including positivity for brachyury and cytokeratins. However, there is a dearth of molecular markers that relate to chordoma tumor growth, as well as the cell lines needed to advance treatment. The objective in this study was to isolate a novel primary chordoma cell source and analyze the characteristics of tumor growth in a mouse xenograft model for comparison with the established U-CH1 and U-CH2b cell lines. METHODS: Primary cells from a sacral chordoma, called "DVC-4," were cultured alongside U-CH1 and U-CH2b cells for more than 20 passages and characterized for expression of CD24 and brachyury. While brachyury is believed essential for driving tumor formation, CD24 is associated with healthy nucleus pulposus cells. Each cell type was subcutaneously implanted in NOD/SCID/IL2Rγ(null) mice. The percentage of solid tumors formed, time to maximum tumor size, and immunostaining scores for CD24 and brachyury (intensity scores of 0-3, heterogeneity scores of 0-1) were reported and evaluated to test differences across groups. RESULTS: The DVC-4 cells retained chordoma-like morphology in culture and exhibited CD24 and brachyury expression profiles in vitro that were similar to those for U-CH1 and U-CH2b. Both U-CH1 and DVC-4 cells grew tumors at rates that were faster than those for U-CH2b cells. Gross tumor developed at nearly every site (95%) injected with U-CH1 and at most sites (75%) injected with DVC-4. In contrast, U-CH2b cells produced grossly visible tumors in less than 50% of injected sites. Brachyury staining was similar among tumors derived from all 3 cell types and was intensely positive (scores of 2-3) in a majority of tissue sections. In contrast, differences in the pattern and intensity of staining for CD24 were noted among the 3 types of cell-derived tumors (p < 0.05, chi-square test), with evidence of intense and uniform staining in a majority of U-CH1 tumor sections (score of 3) and more than half of the DVC-4 tumor sections (scores of 2-3). In contrast, a majority of sections from U-CH2b cells stained modestly for CD24 (scores of 1-2) with a predominantly heterogeneous staining pattern. CONCLUSIONS: This is the first report on xenografts generated from U-CH2b cells in which a low tumorigenicity was discovered despite evidence of chordoma-like characteristics in vitro. For tumors derived from a primary chordoma cell and U-CH1 cell line, similarly intense staining for CD24 was observed, which may correspond to their similar potential to grow tumors. In contrast, U-CH2b tumors stained less intensely for CD24. These results emphasize that many markers, including CD24, may be useful in distinguishing among chordoma cell types and their tumorigenicity in vivo.

Degradation of poly-L-lactide. Part2 : increased temperature accelerated degradation

Poly-L-lactide (PLLA) is one of the most significant members of a group of polymers regarded as bioresorbable. The degradation of PLLA proceeds through hydrolysis of the ester linkages in the polymer's backbone; however, the time for the complete resorption of orthopaedic devices manufactured from PLLA is known to be in excess of five years in a normal physiological environment. To evaluate the degradation of PLLA in an accelerated time period, PLLA pellets were processed by compression moulding into tensile test specimens, prior to being sterilized by ethylene oxide gas (EtO) and degraded in a phosphate-buffered solution (PBS) at both 50°C and 70°C. On retrieval, at predetermined time intervals, procedures were used to evaluate the material's molecular weight, crystallinity, mechanical strength, and thermal properties. The results from this study suggest that at both 50°C and 70°C, degradation proceeds by a very similar mechanism to that observed at 37°C in vitro and in vivo. The degradation models developed also confirmed the dependence of mass loss, melting temperature, and glass transition temperature (Tg) on the polymer's molecular weight throughout degradation. Although increased temperature appears to be a suitable method for accelerating the degradation of PLLA, relative to its physiological degradation rate, concerns still remain over the validity of testing above the polymer's Tg and the significance of autocatalysis at increased temperatures.

Conditioning film and environmental effects on the adherence of Candida spp. to silicone and poly(vinylchloride) biomaterials.

The reported incidence of colonization of oropharyngeal medical devices with Candida spp. has increased in recent years, although few studies that have systematically examined the adherence of yeast cells to such biomaterials, the primary step in the process of colonization. This study, therefore, examined the effects of oropharyngeal atmospheric conditions (5% v/v carbon dioxide) and the presence of a salivary conditioning film on both the surface properties and adherence of Candida albicans, Candida krusei and Candida tropicalis to PVC and silicone. Furthermore, the effects of the salivary conditioning film on the surface properties of these biomaterials are reported. Growth of the three Candida spp. in an atmosphere containing 5% v/v CO2 significantly increased their cell surface hydrophobicity and reduced the zeta potential of C. albicans and C. krusei yet increased the zeta potential of C. tropicalis (p < 0.05). Furthermore, growth in 5% v/v CO2 decreased the adherence of C. tropicalis and C. albicans to both PVC and silicone, however, increased adherence of C. krusei (p < 0.05). Pre-treatment of the microorganisms with pooled human saliva significantly decreased their cell surface hydrophobicity and increased their adherence to either biomaterial in comparison to yeast cells that had been pre-treated with PBS (p < 0.05). Saliva treatment of the microorganisms had no consistent effect on microbial zeta potential. Interestingly, adherence of the three, saliva-treated Candida spp. to saliva-treated silicone and PVC was significantly lower than whenever the microorganisms and biomaterials had been treated with PBS (p < 0.05). Treatment of silicone and PVC with saliva significantly altered the surface properties, notably reducing both the advancing and receding contact angles and, additionally, the microrugosity. These effects may contribute to the decreased adherence of saliva-treated microorganisms to these biomaterials. In conclusion, this study has demonstrated the effects of physiological conditions within the oral cavity on the adherence of selected Candida spp. to biomaterials employed as oropharyngeal medical devices. In particular, this study has ominously shown that these materials act as substrates for yeast colonization, highlighting the need for advancements in biomaterial design. Furthermore, it is important that physiological conditions should be employed whenever biocompatibility of oropharyngeal biomaterials is under investigation. © 2001 Kluwer Academic Publishers.

Characterisation and evaluation of novel surfactant bacterial anti-adherent coatings for endotracheal tubes designed for the prevention of ventilator-associated pneumonia.

It is accepted that ventilator-associated pneumonia is a frequent cause of morbidity and mortality in intensive care patients. This study describes the physicochemical properties of novel surfactant coatings of the endotracheal tube and the resistance to microbial adherence of surfactant coated endotracheal tube polyvinylchloride (PVC). Organic solutions of surfactants containing a range of ratios of cholesterol and lecithin (0:100, 25:75, 50:50, 75:25, dissolved in dichloromethane) were prepared and coated onto endotracheal tube PVC using a multiple dip-coating process. Using modulated temperature differential scanning calorimetry it was confirmed that the binary surfactant systems existed as physical mixtures. The surface properties of both surfactant-coated and uncoated PVC, following treatment with either pooled human saliva or phosphate-buffered saline (PBS), were characterised using dynamic contact angle analysis. Following treatment with saliva, the contact angles of PVC decreased; however, those of the coated biomaterials were unaffected, indicating different rates and extents of macromolecular adsorption from saliva onto the coated and uncoated PVC. The advancing and receding contact angles of the surfactant-coated PVC were unaffected by sonication, thereby providing evidence of the durability of the coatings. The cell surface hydrophobicity and zeta potentials of isolates of Staphylococcus aureus and Pseudomonas aeruginosa, following treatment with either saliva or PBS, and their adherence to uncoated and surfactant-coated PVC (that had been pre-treated with saliva) were examined. Adherence of S. aureus and Ps. aeruginosa to surfactant-coated PVC at each successive time period (0.5, 1, 2, 4, 8 h) was significantly lower than to uncoated PVC, the extent of the reduction frequently exceeding 90%. Interestingly, the microbial anti-adherent properties of the coatings were dependent on the lecithin content. Based on the impressive microbial anti-adherence properties and durability of the surfactant coating on PVC following dip coatings, it is proposed that these systems may usefully reduce the incidence of ventilator-associated pneumonia when employed as luminal coatings of the endotracheal tube.

Poly(epsilon-caprolactone) and poly(epsilon-caprolactone)-polyvinylpyrrolidone-iodine blends as ureteral biomaterials: characterisation of mechanical and surface properties, degradation and resistance to encrustation in vitro.

This study describes the physicochemical properties and in vitro resistance to encrustation of solvent cast films composed of either poly(epsilon-caprolactone) (PCL), prepared using different ratios of high (50,000) to low (4000) (molecular weight) m.wt., or blends of PCL and the polymeric antimicrobial complex, poly(vinylpyrrolidone)-iodine (PVP-I). The incorporation of PVP-I offered antimicrobial activity to the biomaterials. Films were characterised in terms of mechanical (tensile analysis, dynamic mechanical thermal analysis) and surface properties (dynamic contact angle analysis, scanning electron microscopy), whereas degradation (at 37degreesC in PBS at pH 7.4) was determined gravimetrically. The resistance of the films to encrustation was evaluated using an in vitro encrustation model. Reductions in the ratio of high:low-m.wt. PCL significantly reduced the ultimate tensile strength, % elongation at break and the advancing contact angle of the films. These effects were attributed to alterations in the amorphous content and the more hydrophilic nature of the films. Conversely, there were no alterations in Young's modulus, the viscoelastic properties and glass-transition temperature. Incorporation of PVP-I did not affect the mechanical or rheological properties of the films, indicative of a limited interaction between the two polymers in the solid state. Manipulation of the high:low m.wt. ratio of PCL significantly altered the degradation of the films, most notably following longer immersion periods, and resistance to encrustation. Accordingly, maximum degradation and resistance to encrustation was observed with the biomaterial composed of 40:60 high:low m.wt. ratios of PCL; however, the mechanical properties of this system were considered inappropriate for clinical application. Films composed of either 50:50 or 60:40 ratio of high:low m.wt. PCL offered an appropriate compromise between physicochemical properties and resistance to encrustation. This study has highlighted the important usefulness of degradable polymer systems as ureteral biomaterials

Moisture-Activated Rheological Structuring of Nonaqueous Poloxamine–Poly(Acrylic Acid) Systems Designed as Novel Biomedical Implants

This study reports the formulation/characterisation of novel polymeric platforms designed to behave as low-viscosity systems in the nonaqueous state, however, following uptake of aqueous ?uids, exhibit rheological structuring and mucoadhesion. The rheological/mechanical and mucoadhesive properties of platforms containing poly(acrylic acid) (PAA, 1%, 3%, 5%, w/w) and poloxamines (Tetronic 904, 901, 704, 701, 304), both in the absence and presence of phosphate buffered saline (PBS, pH 7.4) are described. With the exception of Tetronic 904, all formulations exhibited Newtonian ?ow in the nonaqueous state, whereas, all aqueous formulations displayed pseudoplastic ?ow. The consistency and viscoelastic properties were dependent on the concentrations of PAA and PBS and Tetronic grade. PBS signi?cantly increased the consistency, viscoelasticity and mucoadhesion, reaching a maximum at a de?ned concentration of PBS that was dependent on PAA concentration and Tetronic grade. Formulations containing Tetronic 904 exhibited greatest consistency and elasticity both prior to and after dilution with PBS. Increasing PAA concentration enhanced the mucoadhesive properties. Prolonged drug release of metronidazole was observed from formulations containing 10% (w/w) PBS, 3% and, particularly, 5% (w/w) PAA. It is suggested that the physicochemical properties of formulations containing 3% or 5% (w/w) PAA and Tetronic 904, would render them suitable platforms for administration to body cavities.