880 resultados para Spanish language -- Computer-assisted instruction
Resumo:
The present study describes a pragmatic approach to the implementation of production planning and scheduling techniques in foundries of all types and looks at the use of `state-of-the-art' management control and information systems. Following a review of systems for the classification of manufacturing companies, a definitive statement is made which highlights the important differences between foundries (i.e. `component makers') and other manufacturing companies (i.e. `component buyers'). An investigation of the manual procedures which are used to plan and control the manufacture of components reveals the inherent problems facing foundry production management staff, which suggests the unsuitability of many manufacturing techniques which have been applied to general engineering companies. From the literature it was discovered that computer-assisted systems are required which are primarily `information-based' rather than `decision based', whilst the availability of low-cost computers and `packaged-software' has enabled foundries to `get their feet wet' without the financial penalties which characterized many of the early attempts at computer-assistance (i.e. pre-1980). Moreover, no evidence of a single methodology for foundry scheduling emerged from the review. A philosophy for the development of a CAPM system is presented, which details the essential information requirements and puts forward proposals for the subsequent interactions between types of information and the sub-system of CAPM which they support. The work developed was oriented specifically at the functions of production planning and scheduling and introduces the concept of `manual interaction' for effective scheduling. The techniques developed were designed to use the information which is readily available in foundries and were found to be practically successful following the implementation of the techniques into a wide variety of foundries. The limitations of the techniques developed are subsequently discussed within the wider issues which form a CAPM system, prior to a presentation of the conclusions which can be drawn from the study.
Resumo:
Research indicates that although students are the ultimate 'beneficiaries of Information and Communication Technology (ICT)-based' higher education learning their voices have been neglected in its development. This paper attempts to redress this imbalance by illuminating students' perceptions of the use of Computer Assisted Learning (CAL) in an undergraduate accounting module. The findings suggest that students are in favour of using EQL in a supportive role only. Interviewees rejected the idea of replacing human tutors with machine tutors and they believed that most of their learning occurs in tutorials and ranked these as the most important component of the module.
Resumo:
We discuss some main points of computer-assisted proofs based on reliable numerical computations. Such so-called self-validating numerical methods in combination with exact symbolic manipulations result in very powerful mathematical software tools. These tools allow proving mathematical statements (existence of a fixed point, of a solution of an ODE, of a zero of a continuous function, of a global minimum within a given range, etc.) using a digital computer. To validate the assertions of the underlying theorems fast finite precision arithmetic is used. The results are absolutely rigorous. To demonstrate the power of reliable symbolic-numeric computations we investigate in some details the verification of very long periodic orbits of chaotic dynamical systems. The verification is done directly in Maple, e.g. using the Maple Power Tool intpakX or, more efficiently, using the C++ class library C-XSC.
Resumo:
In a study of the triadic interaction among pairs of advanced second language learners engaged in a complex language task, it was found that the scaffolding provided by the researcher was determinant in keeping the participants on task and encouraging language production, thus facilitating both language development and comprehension.
Resumo:
Many students are entering colleges and universities in the United States underprepared in mathematics. National statistics indicate that only approximately one-third of students in developmental mathematics courses pass. When underprepared students repeatedly enroll in courses that do not count toward their degree, it costs them money and delays graduation. This study investigated a possible solution to this problem: Whether using a particular computer assisted learning strategy combined with using mastery learning techniques improved the overall performance of students in a developmental mathematics course. Participants received one of three teaching strategies: (a) group A was taught using traditional instruction with mastery learning supplemented with computer assisted instruction, (b) group B was taught using traditional instruction supplemented with computer assisted instruction in the absence of mastery learning and, (c) group C was taught using traditional instruction without mastery learning or computer assisted instruction. Participants were students in MAT1033, a developmental mathematics course at a large public 4-year college. An analysis of covariance using participants' pretest scores as the covariate tested the null hypothesis that there was no significant difference in the adjusted mean final examination scores among the three groups. Group A participants had significantly higher adjusted mean posttest score than did group C participants. A chi-square test tested the null hypothesis that there were no significant differences in the proportions of students who passed MAT1033 among the treatment groups. It was found that there was a significant difference in the proportion of students who passed among all three groups, with those in group A having the highest pass rate and those in group C the lowest. A discriminant factor analysis revealed that time on task correctly predicted the passing status of 89% of the participants. ^ It was concluded that the most efficacious strategy for teaching developmental mathematics was through the use of mastery learning supplemented by computer-assisted instruction. In addition, it was noted that time on task was a strong predictor of academic success over and above the predictive ability of a measure of previous knowledge of mathematics.^
Resumo:
The importance of pyrazole and isoquinoline-5,8-dione scaffolds in medical chemistry is underlined by the high number of drugs currently on trading that contains these active ingredients. Due to their cytotoxic capability, the interest of medicinal chemists in these heterocyclic rings has grown exponentially especially, for cancer therapy. In this project, the first synthesis of pyrazole-fused isoquinoline-5,8-diones has been developed. 1,3-Dipolar cycloaddition followed by oxidative aromatization, established by our research group, has been employed. Screening of reaction conditions and characterization studies about the regioselectivity have been successfully performed. A remote control of regioselectivity, to achieve the two possible regioisomers has been accomplished. Through Molecular Docking studies, Structure-Activity relationship of differently substituted scaffolds containing our central core proved that a family of PI3K inhibitors have been discovered. Finally, in order to verify the promising antitumor activity, a first test of cell viability in vitro on T98G cell line of a solid brain tumor, the Glioblastoma Multiforme, showed cytotoxic inhibition comparable to currently trade anticancer drugs.
Resumo:
Coverage of corruption in the Hungarian media was analyzed using four online news portals. Three of them, Magyar Nemzet Online (short name: MNO, web: mno.hu), Népszava (web: nepszava.hu) and Heti Világgazdaság (web: hvg.hu) are also available as newspapers but the content of these papers is different from the online form to a certain extent. The news portal Origo (web: origo.hu) has no print version.
Resumo:
Introduction: Computer-Aided-Design (CAD) and Computer-Aided-Manufacture (CAM) has been developed to fabricate fixed dental restorations accurately, faster and improve cost effectiveness of manufacture when compared to the conventional method. Two main methods exist in dental CAD/CAM technology: the subtractive and additive methods. While fitting accuracy of both methods has been explored, no study yet has compared the fabricated restoration (CAM output) to its CAD in terms of accuracy. The aim of this present study was to compare the output of various dental CAM routes to a sole initial CAD and establish the accuracy of fabrication. The internal fit of the various CAM routes were also investigated. The null hypotheses tested were: 1) no significant differences observed between the CAM output to the CAD and 2) no significant differences observed between the various CAM routes. Methods: An aluminium master model of a standard premolar preparation was scanned with a contact dental scanner (Incise, Renishaw, UK). A single CAD was created on the scanned master model (InciseCAD software, V2.5.0.140, UK). Twenty copings were then fabricated by sending the single CAD to a multitude of CAM routes. The copings were grouped (n=5) as: Laser sintered CoCrMo (LS), 5-axis milled CoCrMo (MCoCrMo), 3-axis milled zirconia (ZAx3) and 4-axis milled zirconia (ZAx4). All copings were micro-CT scanned (Phoenix X-Ray, Nanotom-S, Germany, power: 155kV, current: 60µA, 3600 projections) to produce 3-Dimensional (3D) models. A novel methodology was created to superimpose the micro-CT scans with the CAD (GOM Inspect software, V7.5SR2, Germany) to indicate inaccuracies in manufacturing. The accuracy in terms of coping volume was explored. The distances from the surfaces of the micro-CT 3D models to the surfaces of the CAD model (CAD Deviation) were investigated after creating surface colour deviation maps. Localised digital sections of the deviations (Occlusal, Axial and Cervical) and selected focussed areas were then quantitatively measured using software (GOM Inspect software, Germany). A novel methodology was also explored to digitally align (Rhino software, V5, USA) the micro-CT scans with the master model to investigate internal fit. Fifty digital cross sections of the aligned scans were created. Point-to-point distances were measured at 5 levels at each cross section. The five levels were: Vertical Marginal Fit (VF), Absolute Marginal Fit (AM), Axio-margin Fit (AMF), Axial Fit (AF) and Occlusal Fit (OF). Results: The results of the volume measurement were summarised as: VM-CoCrMo (62.8mm3 ) > VZax3 (59.4mm3 ) > VCAD (57mm3 ) > VZax4 (56.1mm3 ) > VLS (52.5mm3 ) and were all significantly different (p presented as areas with different colour. No significant differences were observed at the internal aspect of the cervical aspect between all groups of copings. Significant differences (p< M-CoCrMo Internal Occlusal, Internal Axial and External Axial 2 ZAx3 > ZAx4 External Occlusal, External Cervical 3 ZAx3 < ZAx4 Internal Occlusal 4 M-CoCrMo > ZAx4 Internal Occlusal and Internal Axial The mean values of AMF and AF were significantly (p M-CoCrMo and CAD > ZAx4. Only VF of M-CoCrMo was comparable with the CAD Internal Fit. All VF and AM values were within the clinically acceptable fit (120µm). Conclusion: The investigated CAM methods reproduced the CAD accurately at the internal cervical aspect of the copings. However, localised deviations at axial and occlusal aspects of the copings may suggest the need for modifications in these areas prior to fitting and veneering with porcelain. The CAM groups evaluated also showed different levels of Internal Fit thus rejecting the null hypotheses. The novel non-destructive methodologies for CAD/CAM accuracy and internal fit testing presented in this thesis may be a useful evaluation tool for similar applications.
Resumo:
Interacting with a computer system in the operating room (OR) can be a frustrating experience for a surgeon, who currently has to verbally delegate to an assistant every computer interaction task. This indirect mode of interaction is time consuming, error prone and can lead to poor usability of OR computer systems. This thesis describes the design and evaluation of a joystick-like device that allows direct surgeon control of the computer in the OR. The device was tested extensively in comparison to a mouse and delegated dictation with seven surgeons, eleven residents, and five graduate students. The device contains no electronic parts, is easy to use, is unobtrusive, has no physical connection to the computer and makes use of an existing tool in the OR. We performed a user study to determine its effectiveness in allowing a user to perform all the tasks they would be expected to perform on an OR computer system during a computer-assisted surgery. Dictation was found to be superior to the joystick in qualitative measures, but the joystick was preferred over dictation in user satisfaction responses. The mouse outperformed both joystick and dictation, but it is not a readily accepted modality in the OR.
Resumo:
Die Nützlichkeit des Einsatzes von Computern in Schule und Ausbildung ist schon seit einigen Jahren unbestritten. Uneinigkeit herrscht gegenwärtig allerdings darüber, welche Aufgaben von Computern eigenständig wahrgenommen werden können. Bewertet man die Übernahme von Lehrfunktionen durch computerbasierte Lehrsysteme, müssen häufig Mängel festgestellt werden. Das Ziel der vorliegenden Arbeit ist es, ausgehend von aktuellen Praxisrealisierungen computerbasierter Lehrsysteme unterschiedliche Klassen von zentralen Lehrkompetenzen (Schülermodellierung, Fachwissen und instruktionale Aktivitäten im engeren Sinne) zu bestimmen. Innerhalb jeder Klasse werden globale Leistungen der Lehrsysteme und notwendige, in komplementärer Relation stehende Tätigkeiten menschlicher Tutoren bestimmt. Das dabei entstandene Klassifikationsschema erlaubt sowohl die Einordnung typischer Lehrsysteme als auch die Feststellung von spezifischen Kompetenzen, die in der Lehrer- bzw. Trainerausbildung zukünftig vermehrt berücksichtigt werden sollten. (DIPF/Orig.)
Resumo:
The purpose of the current thesis is to develop a better understanding of the interaction between Spanish and Quichua in the Salcedo region and provide more information for the processes that might have given rise to Media Lengua, a ‘mixed’ language comprised of a Quichua grammar and Spanish lexicon. Muysken attributes the formation of Media Lengua to relexification, ruling out any influence from other bilingual phenomena. I argue that the only characteristic that distinguishes Media Lengua from other language contact varieties in central Ecuador is the quantity of the overall Spanish borrowings and not the type of processes that might have been employed by Quichua speakers during the genesis of Media Lengua. The results from the Salcedo data that I have collected show how processes such as adlexification, code-mixing, and structural convergence produce Media Lengua-type sentences, evidence that supports an alternative analysis to Muysken’s relexification hypothesis. Overall, this dissertation is developed around four main objectives: (1) to describe the variation of Spanish loanwords within a bilingual community in Salcedo; (2) to analyze some of the prominent and recent structural changes in Quichua and Spanish; (3) to determine whether Spanish loanword use can be explained by the relationship consultants have with particular social categories; and (4) to analyze the consultants’ language ideologies toward syncretic uses of Spanish and Quichua. Overall, 58% of the content words, 39% of the basic vocabulary, and 50% of the subject pronouns in the Salcedo corpus were derived from Spanish. When compared to Muysken’s description of highlander Quichua in the 1970’s, Spanish loanwords have more than doubled in each category. The overall level of Spanish loanwords in Salcedo Quichua has grown to a level between highlander Quichua in the 1970’s and Media Lengua. Similar to Spanish’s lexical influence in Media Lengua, the increase of Spanish borrowings in today’s rural Quichua can be seen in non-basic and basic vocabularies as well as the subject pronoun system. Significantly, most of the growth has occurred through forms of adlexification i.e., doublets, well-established borrowings, and cultural borrowings, suggesting that ‘ordinary’ lexical borrowing is also capable of producing Media Lengua-type sentences. I approach the second objective by investigating two separate phenomena related to structural convergence. The first examines the complex verbal constructions that have developed in Quichua through Spanish loan translations while the second describes the type of Quichua particles that are attached to Spanish lexemes while speaking Spanish. The calquing of the complex verbal constructions from Spanish were employed when speaking standard Quichua. Since this standard form is typically used by language purists, I argue that their use of calques is a strategy of exploiting the full range of expression from Spanish without incorporating any of the Spanish lexemes which would give the appearance of ‘contamination’. The use of Quichua particles in local varieties of Spanish is a defining characteristic of Quichuacized Spanish, spoken most frequently by women and young children in the community. Although the use of Quichua particles was probably not the main catalyst engendering Media Lengua, I argue that its contribution as a source language to other ‘mixed’ varieties, such as Media Lengua, needs to be accounted for in descriptions of BML genesis. Contrary to Muysken’s representation of relatively ‘unmixed’ Spanish and Quichua as the two source languages of Media Lengua, I propose that local varieties of Spanish might have already been ‘mixed’ to a large degree before Media Lengua was created. The third objective attempts to draw a relationship between particular social variables and the use of Spanish loanwords. Whisker Boxplots and ANOVAs were used to determine which social group, if any, have been introducing new Spanish borrowings into the bilingual communities in Salcedo. Specifically, I controlled for age, education, native language, urban migration, and gender. The results indicate that none of the groups in each of the five social variables indicate higher or lower loanword use. The implication of these results are twofold: (a) when lexical borrowing occurs, it is immediately adopted as the community-wide norm and spoken by members from different backgrounds and generations, or (b) this level of Spanish borrowing (58%) is not a recent phenomenon. The fourth and final objective draws on my ethnographic research that addresses the attitudes of syncretic language use. I observed that Quichuacized Spanish and Hispanicized Quichua are highly stigmatized varieties spoken by the country’s most marginalized populations and families, yet within the community, syncretic ways of speaking are in fact the norm. It was shown that there exists a range of different linguistic definitions for ‘Chaupi Lengua’ and other syncretic language practices as well as many contrasting connotations, most of which were negative. One theme that emerged from the interviews was that speaking syncretic varieties of Quichua weakened the consultant’s claim to an indigenous identity. The linguistic and social data presented in this dissertation supports an alternative view to Muysken’s relexification hypothesis, one that has the advantage of operating with well-precedented linguistic processes and which is actually observable in the present-day Salcedo area. The results from the study on lexical borrowing are significant because they demonstrate how a dynamic bilingual speech community has gradually diversified their Quichua lexicon under intense pressure to shift toward Spanish. They also show that Hispanicized Quichua (Quichua with heavy lexical borrowing) clearly arose from adlexification and prolonged lexical borrowing, and is one of at least six identifiable speech styles found in Salcedo. These results challenge particular interpretations of language contact outcomes, such as, ones that depict sources languages as discrete and ‘unmixed.’ The bilingual continuum presented in this thesis shows on the one hand, the range of speech styles that are accessible to different speakers, and on the other hand, the overlapping, syncretic features that are shared among the different registers and language varieties. It was observed that syncretic speech styles in Salcedo are employed by different consultants in varied interactional contexts, and in turn, produce different evaluations by other fellow community members. In the current dissertation, I challenge the claim that relexification and Media Lengua-type sentences develop in isolation and without the influence of other bilingual phenomena. Based on Muysken's Media Lengua example sentences and the speech styles from the Salcedo corpus, I argue that Media Lengua may have arisen as an institutionalized variant of the highly mixed "middle ground" within the range of the Salcedo bilingual continuum discussed above. Such syncretic forms of Spanish and Quichua strongly resemble Media Lengua sentences in Muysken’s research, and therefore demonstrate how its development could have occurred through several different language contact processes and not only through relexification.
Resumo:
Over the past decades, many studies have dealt with Anglicisms in Spanish, not only in science and technology, but also in other areas such as business, fashion and even sports. However, in spite of the large number of works on Spanish Anglicisms in sports, these have often disregarded the distinction between Anglicisms and false Anglicisms. Given their importance as evidence of the particular relationships between languages, this article focuses on the use of false Anglicisms in the Spanish language of sports, which has not only adopted English words giving them new meanings and usage, but has also either imported items with an English appearance from other languages or created its own forms based on English patterns. Although these false Anglicisms, which have proven extremely popular in various European languages (not only Spanish), have frequently been used and disseminated, as some examples will prove, little attention has been paid to their differences with the English term or their non-English origin.
Resumo:
CULTURE is an Artificial Life simulation that aims to provide primary school children with opportunities to become actively engaged in the high-order thinking processes of problem solving and critical thinking. A preliminary evaluation of CULTURE has found that it offers the freedom for children to take part in process-oriented learning experiences. Through providing children with opportunities to make inferences, validate results, explain discoveries and analyse situations, CULTURE encourages the development of high-order thinking skills. The evaluation found that CULTURE allows users to autonomously explore the important scientific concepts of life and living, and energy and change within a software environment that children find enjoyable and easy to use.
Resumo:
La idea inicial va ser la de crear un interactiu multimèdia amb finalitat didàctica que gira entorn els trastorns per dèficit d'atenció.Està adreçat a nens en edat escolar. Com a part principal hi ha una sèrie d'activitatsindicades per a potenciar la concentració i motivar a acabar allò que comença, així comdiversa informació sobre el transtorn i consells sobre activitats a realitzar per treballar les carències d'aquests nens/es.