Alternativas para o abastecimento energético dos fornos de indústrias cerâmicas localizadas no município de São Miguel do Guamá-PA

Diferenciais econômicos e ambientais incorporados a energia da biomassa têm impulsionado a difusão do fornecimento e utilização de biocombustíveis em países desenvolvidos e em desenvolvimento. No Estado do Pará (Brasil), a crescente procura por pó de serragem, caroço de açaí e lenha legalizada, especialmente,relacionada com a atuação de indústrias cerâmicas localizadas no município de São Miguel do Guamá (Pará) e outros segmentos industriais, aponta para uma possível tendência à escassez desses recursos energéticos. Deste modo, necessitando de iniciativa para a busca de combustíveis alternativos que sejam capazes não somente de garantir o suprimento energético indispensável à produção cerâmica atual e futura dessas indústrias, mas também de assegurar a continuidade e preservação dos recursos naturais renováveis da região. Este trabalho consolida pesquisa junto a empresas associadas ao Sindicato das Indústrias Cerâmicas de São Miguel do Guamá, que estão localizadas neste município, utilizando como amostra empresas ceramistas que buscam alternativas em bioenergia, sendo também pesquisados agroindústrias e agricultores presentes nos demais Municípios do Estado do Pará. Objetiva-se a identificação de alternativas para o suprimento energético em fornos cerâmicos, considerando o aproveitamento de fontes energéticas renováveis e oportunidades para redução dos custos de sua aquisição por meio da prática do frete de retorno. Utilizou-se como estratégia de pesquisa o estudo de caso em cinco momentos de entrevistas semiestruturadas orientadas por questionários. Os resultados obtidos indicam que há oportunidade de oferta de biomassa combinante com as necessidades das empresas ceramistas pesquisadas, com potencial para atender demanda energética reprimida e permitindo a continuidade de negócios estratégicos no Pará, como neste momento, o crescente setor da construção civil.

Proposta metodológica para avaliação da matriz energética brasileira em prol do equilíbrio: competitividade e sustentabilidade

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Biodiesel na escola: uma ferramenta educacional para o planejamento energético

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Qualidade da madeira de eucalipto em função do espaçamento, da adubação e da idade conduzida no sistema de curta rotação

Pós-graduação em Ciência Florestal - FCA

Análise dos procedimentos metodológicos utilizados na definição de áreas de influência e níveis de significância em estudos de impacto ambiental de dutovias

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Geoestatística multivariada na delimitação de zonas de manejo na cultura de cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Litofácies e relações estratigráficas da formação Aquidauana no nordeste da Bacia do Paraná - São Sebastião do Paraíso (MG)

The Aquidauana Formation is characterized by sandstones of variable granulation, mudstones and diamectites abundant in clay, typical colors like brick red (vermelho tijolo) of glacial, fluvial and lacustrine origin. It’s chronostratigraphic equivalent to the Itarará group from the Neo Carboniferous age, that under the exploratory view, such units represent important intervals in the basin, occurring together with them minerals as well as energy resources as petroleum, underground water and coal – what requires a great paleogeography and stratigraphy knowledge for its exploration. By gathering information from the columnar sections of the area, it was possible to characterize the sedimentary facies, the stacking pattern as well as the association. It was also made an attempt of stratigraphic correlation, which showed great difficulties since glacial environments present a great lateral discontinuity of the facies besides the complex relationship process of formation. As a result, it was obtained 8 sedimentary facies, the lateral and vertical relations and genesis process. It is proposed that the sedimentary environment in the study area is the fluvio glacial, characterized by alluvial systems formed by defrosted water which transport the sediments that are deposited in plains in front of the glacier (distal outwash). Petrographic thin section analysis showed that the transportation process was ineffective. The grains present punctual to lobular contacts, characterizing good porosity and permeability to the rock, varying these qualities according to more or less existence of matrix. The presence of Iron Oxide deposited between the recrystallization border and feldspathic mineral indicates that this rock has possibly presented a primary rubefaction, intensified by alkaline fluid percolation

Avaliação de funcionamento das bombas hidráulicas do sistema de tratamento de efluentes da Empresa Parker Hannifin

On the field of the projects of hydraulic systems exists a lot of worries when we talk about the calculate of hydraulic pumps. In this case some facts must be considerate: length of tubes, fluid characteristics, height gauge, temperature, pressure, characteristics of tubes, flow required and others. For that mathematic calculates must be developed with the objective to optimize hydraulic pumps and agree to find an ideal machine (that don't requires more energy than necessary or less energy than it requires; that is the more critical case, cause exists the risk that the fluid pumped do not agree to become in your destiny). The wrong calculate of this machine can super-size its, bringing an excessive energy consumption. Actually it's an important subject because we are in the age of lack of energy what turn it more expensive. So the correct sizing of a hydraulic pump is connected with the fact that you have to uses the enough energy resources avoiding waste. The calculate of ideal pump in the pumping system is studied during years and a lot of specialists in this subject develop equations and theories to calculate its. Some researches study about this subject and all of them become to the same conclusion: to find the ideal pump we have to know the characteristics of fluid (cinematic viscosity), the required flow , overall yield (overall of motor x overall of pump) the high gauge or discharge pressure and the loss of repression. The pressure drop can be calculated with different theories: using Hazen-Williams, Darcy e Weisbach or Chézy (1775 - that starts the researches to calculate the pressure drop). Although the most used theory and what is most near to reality is the Darcy's equation. So, in this job the Darcy's equation were choice to calculate the drop pressure that consider what kind of flow we are studying: laminar or turbulent. The determination of the best pump to be used in the ... ( complete abstract click eletronic access below)

Estudo sobre uma turbina a gás instalada em uma refinaria de petróleo

The gas turbine (GT) is known to have: low cost of capital over the amount of energy, high flexibility, high reliability, short delivery time, commissioning and commercial operation at the beginning and quick departure. The gas turbine is also recognized for its superior environmental performance, manifested in air pollution containment and reducing greenhouse gases (Mahi, 1994). Gas turbines in simple cycle mode (SC) have long been used by utilities to limited power generation peak. In addition, manufacturing facilities use gas turbines for power generation units on site, often in combination with the process of heat production, such as hot water and steam process. In recent years, the performance of industrial gas turbines has been improved due to significant investments in research and development, in terms of fuel to electricity conversion efficiency, plant capacity, availability and reliability. The greater availability of energy resources such as natural gas (NG), the significant reduction of capital costs and the introduction of advanced cycles, have also been a success factor for the increased use of gas turbines to load applications base (Poulikas, 2004). Open Cycle Gas Turbine with a greater degree of heat to the atmosphere may alternatively be used to produce additional electricity using a steam cycle, or to compose a cogeneration process. The combined cycle (CC) uses the heat from the gas turbine exhaust gas to increase the power output and increase the overall efficiency of more than 50% second (Najjar, 2001). The initial discovery of these cycles in the commercial power generation market was possible due to the development of the gas turbine. Only from the 1970s that gas turbine inlet temperature and therefore the exhaust gas temperature was sufficiently high to allow a better efficiency in the combined cycle ... (Complete Abstract click electronic access below)

O papel dos consumidores residencias no ambiente das redes inteligentes: medidores eletrônicos de energia

Pós-graduação em Engenharia Mecânica - FEG

Análise das eficiências energética e econômica de dois diferentes sistemas de produção de leite bovino em explorações familiares

This study aimed to analyze the energy efficiency ratings and cost of farming families producing milk in the city of Pardinho (SP). The hypothesis that guides the study is that energy expenditure may be coincident with the economic expenditure showing that there is a relationship between these flows, which can be sustainable or not. To better define the producers studied criteria were used in the official system of rural credit FEAP. Through primary data obtained by the speeches, the itineraries were reconstituted technical detailing the operations employed. Thus, we found two producers with different technical routes. The producer was the one who got one of the highest efficiencies 8.66 and 1.48 respectively. Related to the efficiency, we can see that are close related and when there is a broader idea of the allocation of energy resources and, thus, a better view of the sustainability of the agro ecosystem.

Eficiência energética e econômica da produção de leite bovino em explorações familiares no município de Pardinho, região de Botucatu- SP

The study aimed to analyze the energy and economic efficiency rate family farms producing milk in the county of Pardinho, Sao Paulo State. The criteria used to define producers in this study is that outlined by the Brazilian agricultural credit system FEAP (Fund Expansion of Agribusiness Paulista). Through primary data, obtained by verbal reports, the agroecosystem technical itineraries were re-established, detailing the process applied, machinery, implements, equipment, supplies and manual work. These were transformed into energy and economic units, which allowed determining the established connection between energy economics outputs and inputs. The hypothesis of this study is that the energetic expenditure may be coincidental with economic expenditures. The energetic and economic flows were analyzed, using a structure of expenditures, by type, source and form of gross energy, as well as the energetic point of view. Four producers were found to have different technical itineraries. Producers 1 and 2 achieved the highest energy and economic efficiency rates. The producer with the lowest efficiency rates was producer 4. The energy sources not renewable like chemical fertilizers were the most used reaching an average of 82.9% for the energy and 52.86% for the economic expenditures. When comparing energy and economic efficiency it is possible to verify that both forms of analysis are close, obtaining a broader idea about energy resources allocation.

Ciclo de cogeração a partir de resíduos de poda de árvores na cidade de Guaratinguetá

The current socio-economic situation has brought a need to look for alternative ways to get energy that allow reducing the high dependence on fossil fuel sources while deflect from the climate change arising from the result of the use of these energy resources. Renewable sources of energy, low and medium temperature appear as high potential of energy resources, which have a major influence on the way of life of the people to enable decentralized energy production. In Brazil, in particular, have also the need to decentralize the energy grid, currently focused on energy from water source. The current water crisis, exemplifies the urgency of betting on other energy sources, as a way to help in emergency situations such as the current one. Therefore, this study evaluates the possibility of using biomass as a heat source in a Rankine Cycle Organic where instead of water; it uses thermal fluid as working fluid, was compared the urban areas of the city of Guaratinguetá with the urban area of the metropolitan region of São Paulo. Thus, it was established two scenarios, so it was possible to establish the cycle to be used

Ciclo de cogeração a partir de resíduos de poda de árvores na cidade de Guaratinguetá

The current socio-economic situation has brought a need to look for alternative ways to get energy that allow reducing the high dependence on fossil fuel sources while deflect from the climate change arising from the result of the use of these energy resources. Renewable sources of energy, low and medium temperature appear as high potential of energy resources, which have a major influence on the way of life of the people to enable decentralized energy production. In Brazil, in particular, have also the need to decentralize the energy grid, currently focused on energy from water source. The current water crisis, exemplifies the urgency of betting on other energy sources, as a way to help in emergency situations such as the current one. Therefore, this study evaluates the possibility of using biomass as a heat source in a Rankine Cycle Organic where instead of water; it uses thermal fluid as working fluid, was compared the urban areas of the city of Guaratinguetá with the urban area of the metropolitan region of São Paulo. Thus, it was established two scenarios, so it was possible to establish the cycle to be used

El gran reto de la integración de la electricidad de origen renovable en las redes eléctricas de Canarias

[ES] Las Islas Canarias carecen totalmente de recursos energéticos convencionales, representando la importación de energía primaria un 98% del consumo del Archipiélago. En la actualidad las Islas se suministran de petróleo y sus derivados, importándolos mediante buques. Sin embargo, Canarias posee un alto potencial de energías renovables, energías autóctonas y limpias, pero tan sólo un 2% del consumo de energía primaria procede de energías renovables. La búsqueda de la sostenibilidad energética es uno de los grandes desafíos de Canarias y la integración de la electricidad de origen renovable en sus redes eléctricas uno de los grandes retos que podría convertir a Canarias en un laboratorio a nivel mundial; el ejemplo de la isla de El Hierro así lo constata. Este artículo versa sobre este gran reto que supone la integración de energías renovables en las redes eléctricas de Canarias.