Otimização das condições de produção de ésteres etílicos a partir de óleo de peixe com elevado teor de ácidos graxos ômega-3

The production of ethyl esters by alcoholysis is an alternative for splitting triacylglycerols due to the possibility of using low temperatures, which results in oxidative protection of the polyunsaturated fatty acids. Ethyl esters produced under mild conditions of temperature could be used as substrate for obtaining structured lipids. The reaction parameters of production of ethyl esters from fish oil with high content of omega-3 fatty acids by alcoholysis were optimized using response surface methodology. An experimental design (2³) (with levels +1 and -1, six axial points with levels -alpha and +alpha and three central points) was applied. The variables investigated were concentration of catalyst, amount of ethyl alcohol and temperature. Ethyl ester conversion was monitored by high performance size exclusion chromatography (HPSEC) and the best result obtained was 95% conversion rate. The optimal conditions were 40 °C, 1% of NaOH and 36% of ethanol.

Otimização das condições de extração de saponinas em Ampelozizyphus amazonicus usando planejamento experimental e metodologia de superfície de resposta

This works describes the use of experimental design and surface response methodology for optimization of saponin extraction from Ampelozizyphus amazonicus. For this purpose, a method employing extraction based on maceration assisted by ultrasound technique was utilized. The following factors were studied: extraction length of time and solvent composition. The total saponin was determined by using a gravimetric method and the results expressed by their relative proportion to total crude extract. For the specific condition, 60% hydro-alcoholic solution and 18 minutes extraction length of time has shown the best results. This method can be useful for extraction of substances with biological importance

Modelo dinâmico de simulação e otimização da força normal de reação do solo para um mecanismo de corte basal

The physical model was based on the method of Newton-Euler. The model was developed by using the scientific computer program Mathematica®. Several simulations where tried varying the progress speeds (0.69; 1.12; 1.48; 1.82 and 2.12 m s-1); soil profiles (sinoidal, ascending and descending ramp) and height of the profile (0.025 and 0.05 m) to obtain the normal force of soil reaction. After the initial simulations, the mechanism was optimized using the scientific computer program Matlab® having as criterion (function-objective) the minimization of the normal force of reaction of the profile (FN). The project variables were the lengths of the bars (L1y, L2, l3 and L4), height of the operation (L7), the initial length of the spring (Lmo) and the elastic constant of the spring (k t). The lack of robustness of the mechanism in relation to the variable height of the operation was outlined by using a spring with low rigidity and large length. The results demonstrated that the mechanism optimized showed better flotation performance in relation to the initial mechanism.

Projeto de um cortador de base para colhedora de cana-de-açúcar utilizando otimização matemática

A base-cutter represented for a mechanism of four bars, was developed using the Autocad program. The normal force of reaction of the profile in the contact point was determined through the dynamic analysis. The equations of dynamic balance were based on the laws of Newton-Euler. The linkage was subject to an optimization technique that considered the peak value of soil reaction force as the objective function to be minimized while the link lengths and the spring constant varied through a specified range. The Algorithm of Sequential Quadratic Programming-SQP was implemented of the program computational Matlab. Results were very encouraging; the maximum value of the normal reaction force was reduced from 4,250.33 to 237.13 N, making the floating process much less disturbing to the soil and the sugarcane rate. Later, others variables had been incorporated the mechanism optimized and new otimization process was implemented .

Filtros de areia aplicados à irrigação localizada: teoria e prática

The application of sand filters in localized irrigation systems is recommended in the presence of organic and algae contamination. The proper design and maintenance of these equipments are essential to assure an effective water quality control, in order to reduce the emitters clogging, to keep its water application uniformity, and to prevent increasing in the system operation costs. Despite the existence of some references about design, operation and maintenance of these filters, they are dispersed, with not enough details to guarantee the optimization of its hydraulics structure design and the proper selection of porous media to be used. Therefore, the objective of this work was to report a current literature review, relating practical information with scientific knowledge. The content of this review would help to induce and intensify the research on this subject and to contribute so the operational functions for the equipment are reached. It is also expected to assist the improvement of the filtration and flushing processes in the agricultural irrigation and the development of original design procedures and the rational use of these devices.

Otimização da eficiência de limpeza em equipamento de beneficiamento de tomate de mesa

The post-harvesting cleaning process in fresh market tomatoes production is essential to the consumer acceptance, since the degree of dirtiness of the fruits is directly related to its quality. However, the washing stage of the cleaning process of commercial packinghouse demands an excessive water volume, bringing serious environmental concerns. The objective of this work was to compare the cleaning efficiency in two cleaning systems through the evaluation of different operational conditions of the cleaning process, related with the brush rotation, water flow and fruit standing time under the system. It was compared the conventional system utilized in commercial equipment with a system using commercial sprays. The results showed that the cleaning efficiency was not directly related to the water volume used, but to the water pressure, standing time and brushes rotation. Therefore, the use of commercial sprays can bring benefits to the cleaning efficiency, increasing it up to 13%, and to the environmental, decreasing water consumption.

Desidratação osmótica de abacaxi aplicada à tecnologia de métodos combinados

The aim of this research was to optimize osmotic dehydration of pineapple, according to two criteria: maximize water loss and minimize solid gain. The process was made as an application to Combined Methods Technology, in which three preservation factors were combined: water activity, pH and chemical preservatives, all being applied at low levels, in order to get a product resembling non-processed fruit. The experiment was divided into three treatments, being: non-coated pineapple pieces (A), pieces coated with alginate (B) and coated with low-methoxyl pectin (C). Process involved the following main steps: enzymatic inactivation of fruit pieces; in treatments B and C, incorporation of their respective coatings; and osmotic dehydration, in sucrose syrup containing potassium sorbate and citric acid. Optimum conditions, determined from Response Surface Methodology, were the following: dehydration of fruit pieces coated by alginate, at 42-47° C, in sucrose syrup at 66-69° Brix, for 220 to 270 minutes. Results indicated that both coatings significantly affected the mass transfers of the process, reducing solid incorporation and increasing water loss; therefore, increasing weight loss and performance ratio (water loss: solid incorporation) took place. Water activity was not significantly affected by the coatings. The product obtained under optimum conditions was submitted to sensorial evaluation, and presented a good general acceptance. Moulds and yeasts countings indicated good microbiological stability of the product for at least 60 days at 30ºC.

Na rede, pelo lado de fora? : Gestão matricial e politicas publicas de lazer na cidade de Santo Andre

Universidade Estadual de Campinas . Faculdade de Educação Física

Relações entre conteúdo e forma de conhecimentos e práticas pedagógicas em Geociências: imaginário de futuros professores numa disciplina de licenciatura

Pesquisas e reflexões sobre ensino, história e epistemologia das Ciências da Terra têm sido desenvolvidas, em grande parte, intimamente associadas às práticas docentes dos professores/pesquisadores universitários. Nessa mesma perspectiva, buscamos neste trabalho compreender relações que os estudantes de licenciatura em Geografia estabelecem entre o conteúdo/forma trabalhado numa disciplina universitária e o conteúdo/forma profissional, ou seja, pensado na relação com a escola básica, com o tornar-se professor. As respostas dos estudantes a uma questão por nós formulada indicou como eles representaram uma das atividades desenvolvidas na disciplina na relação com seu imaginário sobre ser professor da educação básica. As análises mostraram também que essas significações se produzem de maneiras muito diferentes entre os estudantes, fazendo intervir no imaginário a partir do qual essas significações se produzem, aspectos da memória escolar de alguns estudantes e da maneira como representam o conhecimento escolar e as práticas de ensino na disciplina Geografia da educação básica. As análises mostraram que a atividade não é transparente quanto ao que seja o "conteúdo" de ensino da atividade, posto que essas significações são o trabalho de diferentes memórias discursivas, implicado em diferentes posições-aluno. Este estudo aponta para a importância de considerar e para a possibilidade de trabalhar com os imaginários dos futuros professores sobre ensino na relação que estabelecem com os conteúdos/formas em suas disciplinas científicas universitárias.

A forma sem conteúdo e o sujeito sem subjetividade

O objetivo deste ensaio é refletir acerca da relação entre o primado da forma em nossa sociedade, que se expressa também nos âmbitos políticos e educacionais, e a formação de indivíduos pouco diferençados, no que se refere à sua sensibilidade, percepção e pensamento; tem como hipótese que a ênfase na forma, em diversos domínios sociais, em detrimento do conteúdo específico ao qual deveria se vincular contribui com a formação de indivíduos que têm dificuldades de se identificarem entre si e, por isso, de se desenvolver, sendo propensos à frieza, a uma ausência de percepção das contradições e conflitos sociais e a um pensamento basicamente adaptativo. Essa reflexão é desenvolvida tendo como referência obras de pensadores que constituíram a denominada Escola de Frankfurt, tais como T. W. Adorno, M. Horkheimer e H. Marcuse, e a Psicanálise Freudiana.

Modelo de programação linear para otimização econômica do projeto de irrigação Baixo Acaraú - CE

The present work had as objective uses a model of lineal programming algorithm to optimize the use of the water in the District of Irrigation Baixo Acarau-CE proposing the best combination of crop types and areas established of 8,0 ha. The model aim maximize the net benefit of small farmer, incorporating the constraints in water and land availability, and constraints on the market. Considering crop types and the constraints, the study lead to the following conclusions: 1. The water availability in the District was not a limiting resources, while all available land was assigned in six of the seven cultivation plans analyzed. Furthermore, water availability was a restrictive factor as compared with land only when its availability was made to reduce to 60% of its actual value; 2. The combination of soursop and melon plants was the one that presented the largest net benefit, corresponding to R$ 5,250.00/ha/yr. The planting area for each crop made up to 50% of the area of the plot; 3. The plan that suggests the substitution of the cultivation of the soursop, since a decrease in annual net revenue of 5.87%. However, the plan that contemplates the simultaneous substitution of both soursop and melon produced the lowest liquid revenue, with reduction of 33.8%.

Estudo de variabilidade e otimização do circuito de moagem SAG da Usina do Sossego

Sossego was the first Vale SAG mill operation to process copper-gold ore. It is located in the State of Para, southeastern Amazon region of Brazil. In the first three years of continuous operation, Vale investigated different alternatives for improving the circuit`s performance by investigating operating conditions, mainly focusing on the SAG mill. It was decided to further assess the performance of the comminution circuit as a function of ore characteristics. A comprehensive ore characterization program was then conducted, together with the calibration of mathematical models on the basis of surveys carried out at the industrial circuit. The simulator was then used to predict the throughput associated to each ore type, as well as to establish the optimized circuit configuration and tailored operating conditions. This paper describes in detail the main aspects of optimizing the industrial circuit performance, as well as the successful method for predicting the production as a function of ore characteristics and circuit configuration.

Avalia????o de desempenho: como avaliar os servidores de forma justa?

Na Ag??ncia Nacional de Melhorias, ??rg??o p??blico federal, os servidores t??cnico-administrativos recebem a Gratifica????o de Compensa????o do Vencimento (GCV), a qual ?? paga conforme o desempenho dos servidores, aferido anualmente. Entretanto, o processo de avalia????o de desempenho ocorre de forma injusta e com muitas disfun????es. O desempenho dos servidores n??o ?? efetivamente avaliado, como no caso da equipe do Cl??udio, que possui um servidor com desempenho aqu??m dos demais servidores, mas que recebe a mesma pontua????o

Texto para discuss??o 19: forma????o e capacita????o na constru????o de um novo Estado

Esse ensaio procura tra??ar os contornos desse novo Estado, os perfis dos agentes necess??rios ao seu funcionamento e as formas poss??veis para sua capacita????o. Ao final, faz-se uma avalia????o dos processos de mudan??a que come??am a ocorrer nas organiza????es p??blicas brasileiras, em que se evidencia o grande potencial que nelas existe para seu pr??prio desenvolvimento

A experi??ncia da ENAP na forma????o inicial para a carreira de Especialista em Pol??ticas P??blicas e Gest??o Governamental ??? EPPGG: 1988 a 2006 - Volume 1

A pesquisa apresentada neste documento analisa, interpreta e sistematiza o material das onze edi????es do curso, desenvolvidas pela ENAP, de 1988 a 2006. Consideremos que esta ?? uma hist??ria que merece ser conhecida, permitindo extrair, dos acertos e erros, importantes li????es, as quais a ENAP, com o prop??sito de contribuir para seu cont??nuo aprimoramento, deseja compartilhar com as demais Escolas de Governo, institui????es e profissionais dedicados ao of??cio de forma????o de servidores p??blicos