Boosting the effects of a curriculum based injury prevention program through a school connectedness intervention : final report to NRMA-ACT Road Safety Trust

Injury is the leading cause of death among young people (AIHW, 2008). A primary contributing factor to injury among adolescents is risk taking behaviour, including road related risks such as risky bicycle and motorcycle use and riding with dangerous or drink-drivers. Injury rates increase dramatically throughout adolescence, at the same time as adolescents are becoming more involved in risk taking behaviour. Also throughout this period, adolescents‟ connectedness to school is decreasing (Monahan, Oesterle & Hawkins, 2010; Whitlock, 2004). School connectedness refers to „the extent to which students feel personally accepted, respected, included, and supported by others in the school‟ (Goodenow, 1993, p. 80), and has been repeatedly shown to be a critical protective factor in adolescent development. For example, school connectedness has been shown to be associated with decreased risk taking behaviour, including violence and alcohol and other drug use (e.g., Resnick et al., 1997), as well as with decreased transport risk taking and vehicle related injuries (Chapman et al., accepted April 2011). This project involved the pilot evaluation of a school connectedness intervention (a professional development program for teachers) to reduce adolescent risk taking behaviour and injury. This intervention has been developed for use as a component of the Skills for Preventing Injury in Youth (SPIY) curriculum based injury prevention program for early adolescents. The objectives of this research were to: 1. Implement a trial School Connectedness intervention (professional development program for teachers) in ACT high schools, and evaluate using comparison high schools. 2. Determine whether the School Connectedness program impacts on adolescent risk taking behaviour and associated injuries (particularly transport risks and injuries). 3. Evaluate the process effectiveness of the School Connectedness program.

Profiling high-range speeding offenders : investigating criminal history, personal characteristics, traffic offences, and crash history

This paper reports profiling information for speeding offenders and is part of a larger project that assessed the deterrent effects of increased speeding penalties in Queensland, Australia, using a total of 84,456 speeding offences. The speeding offenders were classified into three groups based on the extent and severity of an index offence: once-only low-rang offenders; repeat high-range offenders; and other offenders. The three groups were then compared in terms of personal characteristics, traffic offences, crash history and criminal history. Results revealed a number of significant differences between repeat high-range offenders and those in the other two offender groups. Repeat high-range speeding offenders were more likely to be male, younger, hold a provisional and a motorcycle licence, to have committed a range of previous traffic offences, to have a significantly greater likelihood of crash involvement, and to have been involved in multiple-vehicle crashes than drivers in the other two offender types. Additionally, when a subset of offenders’ criminal histories were examined, results revealed that repeat high-range speeding offenders were also more likely to have committed a previous criminal offence compared to once only low-range and other offenders and that 55.2% of the repeat high-range offenders had a criminal history. They were also significantly more likely to have committed drug offences and offences against order than the once only low-range speeding offenders, and significantly more likely to have committed regulation offences than those in the other offenders group. Overall, the results indicate that speeding offenders are not an homogeneous group and that, therefore, more tailored and innovative sanctions should be considered and evaluated for high-range recidivist speeders because they are a high-risk road user group.

Crime in rural Australia

As an academic who has spent a quarter of a century living, lecturing and researching in a rural community, I am often impressed by the discrepancies between the reality of rural life and its image in the public consciousness. At least two aspects of this are the most striking. First, there is often - especially, but not exclusively in English-speaking societies - the idea that rural communities represent the "real" or "true" aspects of a society's culture. For example, judging by the representations of rural Australia in the media, rural life is where we find the true Australian, the laconic, taciturn, but decent everyday man and woman, the "battlers", who are not corrupted by urban life. Such an attribution of genuineness to rurality is especially interesting given that the vast majority of contemporary Australians live in cities and that Australia is one of the most urbanised countries in the world. Second, and following from the first point, is the idea that rural areas remain somewhat behind the times, that somehow they are not quite part of the contemporary world. This is a mixed image as it combines both the negative idea of backwardness with the more positive one of a society that has not lost the virtues of stability and civility that we often feel is missing in the city. Both of these ideas combine in the popular image of rural communities as safe places in an increasingly dangerous world. In the popular mind it seems that there is an idea that whatever rural communities may lack in conveniences and sophistication, they remain places where you might walk down the street safely, leave your doors unlocked at night and raise your children confident that they will not be exposed to drugs, gangs and violence. Unfortunately, all of these ideas are fantasies. There is no reason to believe that the residents of rural communities are anymore the truer representations of Australian culture than the average suburbanite.

A randomized controlled trial of a program to reduce adolescent road-related medically-treated injuries

Background Injury is the leading cause of adolescent death and injury around the road is a common source of adolescent injuries. Skills for Preventing Injury in Youth (SPIY) is a comprehensive program developed in Australia for early adolescents (term-long curriculum, including looking out for friends, first-aid training coupled with teacher school-connectedness professional development). Jessors’ Protection-Risk Framework guided the program approach focusing on building protective relationships. Method A randomized controlled trial with 35 schools was undertaken. Students completed surveys at baseline, six-months post-intervention and twelve-months post intervention. There were 1686 students (56% female) who completed the twelve-month survey, including the Extended-Adolescent Injury Checklist whereby students self-report on medically-treated injuries over the previous three-months (only road-related items are reported in this study; cycling, motorcycle riding, pedestrian, and riding as a passenger). Randomly selected SPIY classes also participated in focus groups and reported on perceptions of SPIY and injury risk behavior. Results As a check of randomization baseline differences of the variables were examined, with no significant differences between intervention and control groups. At the 12-month follow-up, there were fewer medically-treated injuries among the intervention students compared with the control group, particularly associated with being a passenger. The process evaluation revealed students perceived change in injury risk and risk behaviors. Conclusions While data analyses are continuing, the results indicate that the program seeking to encourage adolescents to look out for their friends, build connections to school and provide first aid skills training goes some way to reducing self-reported medically-treated injuries around the road.

A comparison of methods to estimate the extent of unlicensed driving: Literature review. Final report to Queensland Transport

Unlicensed driving is a serious problem in many countries, despite ongoing improvements in traffic law enforcement practices and technology. The term ‘unlicensed driver' is generally used to refer to people who operate a motor vehicle or motorcycle without a valid driver's licence, including those who: • have let their licence expire; • have been disqualified or suspended from driving; • hold an inappropriate class of licence for the vehicle they drive; • drive outside the restrictions of a special licence; • don’t currently hold a licence; or • have never held a licence.

An examination of the factors contributing to unlicensed driving. Report to Queensland Department of Transport and Main Roads

Unlicensed driving is a serious problem in many countries, despite ongoing improvements in traffic law enforcement practices and technology. Unlike alcohol impairment and speeding, unlicensed driving does not play a direct causative role in road crashes. However it represents a major problem for road safety in two respects. Firstly, it undermines the effectiveness of driver licensing systems by preventing the allocation of demerit points and reducing the impact of licence loss (Watson, 2004b). Secondly, there is a growing body of evidence linking unlicensed driving to a cluster of high-risk behaviours including drink driving, speeding, failure to wear seat belts and motorcycle use (Griffin & DeLaZerda, 2000; Harrison, 1997; Watson, 1997, 2004b). Consistent with this, utilising the quasi-induced exposure method, Watson (2004a) estimated that in Queensland, unlicensed drivers were almost three times more likely to be involved in a reported crash than licensed drivers.

Motorcyclist hazard perception research: The last 10 years

Motorcycle trauma is a serious issue in Queensland and throughout Australia; the fatality rate per 100 million kilometres travelled for motorcycle riders in Australia is nearly 30 times the rate for drivers of other vehicles (Australian Transport Safety Bureau, 2002). In 2009, the then Queensland Transport (later the Department of Transport and Main Roads or TMR) appointed CARRS-Q to provide a three-year program of Road Safety Research Services for Motorcycle Rider Safety. Funding for this research originated from the Motor Accident Insurance Commission who had the uncommon foresight to fund such a comprehensive program of research.

The Victorian 260 cc Legislation. Evaluation Report Using Accident Data to December, 1982.

Learner and first year probationary motorcyclists are over-represented in traffic accidents, being involved about four times as often as full motorcycle licence holders in relation to their numbers. In an attempt to reduce this over-involvement, the Victorian Government amended the law in 1979 to restrict learner and first year probationary motorcyclists to motorcycles with engine capacities of less than 260 cc. This paper reports an evaluation which showed that casualty rates for learner and first year probationers began to decrease from mid 1979 and continued to do so until the end of 1980. A further analysis indicated that compared to full licence holder casualties, learner permit casualties were about 40% less than expected while first year probationary casualties were about 39% lower.

Learning from insurance data: Injuries to other road users in motorcyclist at-fault crashes

In multi-vehicle motorcycle crashes, the motorcycle rider is less likely to be at-fault but more commonly severely injured than the other road user. Therefore, not surprisingly, crashes in which motorcycle riders are at-fault and particularly the injuries to the other road users in these crashes have received little research attention. This paper aims to address this gap in the literature by investigating the factors influencing the severity of injury to other road users in motorcyclist-at-fault crashes. Five years of data from Queensland, Australia, were obtained from a database of claims against the compulsory third party (CTP) injury insurance of the at-fault motorcyclists. Analysis of the data using an ordered probit model shows higher injury severity for crashes involving young (under 25) and older (60+) at-fault motorcyclists. Among the not at-fault road users, the young, old, and males were found to be more severely injured than others. Injuries to vehicle occupants were less severe than those to pillions. Crashes that occurred between vehicles traveling in opposite directions resulted in more severe injuries than those involving vehicles traveling in the same direction. While most existing studies have analyzed police reported crash data, this study used CTP insurance data. Comparison of results indicates the potential of using CTP insurance data as an alternative to police reported crash data for gaining a better understanding of risk factors for motorcycle crashes and injury severity.

Pimeä hehku : Satanismi ja saatananpalvonta 1990-luvun suomalaisessa nuorisokulttuurissa

Satanism in the Finnish Youth Culture of the 1990s The aim of this study was to investigate Satanism among Finnish youth in the 1990s. Thematic interviews of young Finnish Satanists are the basic material of this study. The research employs a theoretical framework derived from narrative psychology and the role-theoretical thinking of Dan P. McAdams. The young Satanists in Finland have been divided into two different groups: the criminal and drug using "devil-worshipping gangs"; and the more educated and philosophically oriented "Satanists" (Heino 1993). What can we say about this division? In the 1990s around Finland, there were young people calling themselves as devil- worshippers (either singular or in groups). They were strongly committed to a mythical devilish and cosmic battle, which they believed was going on in this world. They had problems with their mental health, also in their family socialization and peer groups. In their personal attitudes they were either active fighters or passive tramps. There were also rationally oriented young Satanists, that were ritually active and mainly atheistic. They strongly expressed their personal experiences of being individual and of being different than others. In their personal attitudes they were critical fighters and active survivors. They saw their lives through the satanistic 'finding-oneself experience'. They understood themselves as a "postmodern tribe" (Michel Maffesoli's sosiocultural concept): their sense of themselves was that of a dynamic collectivity which is social, dynamic, nonlocal and mythically historical. Death and black metal culture in the 1990s formed a common space for youth culture, where young individuals could work out their feelings and express their attitudes to life using dark satanic themes and symbols. The sense of "otherness" (also other than satanic) and collective demands for authenticity were essential tools that were used for identity work here. Personal disengagement from satanic/satanistic groups were observed to be gradual or quite rapid. Religious conversions back-and-forth also accured. At the end of the 1990s all off satanism in Finland bore a negative devil-worshipping stigma. Ritual homicide in South-Finland (Kerava/Hyvinkää) was connected to Satanism, which then became unpopular both in the personal life stories and alternative youth cultural circles at the beginning of the 2000s.

Common underlying steering curves for motorcycles in steady turns

We study the steady turn behaviours of some light motorcycle models on circular paths, using the commercial software package ADAMS-Motorcycle. Steering torque and steering angle are obtained for several path radii and a range of steady forward speeds. For path radii much greater than motorcycle wheelbase, and for all motorcycle parameters including tyre parameters held fixed, dimensional analysis can predict the asymptotic behaviour of steering torque and angle. In particular, steering torque is a function purely of lateral acceleration plus another such function divided by path radius. Of these, the first function is numerically determined, while the second is approximated by an analytically determined constant. Similarly, the steering angle is a function purely of lateral acceleration, plus another such function divided by path radius. Of these, the first is determined numerically while the second is determined analytically. Both predictions are verified through ADAMS simulations for various tyre and geometric parameters. In summary, steady circular motions of a given motorcycle with given tyre parameters can be approximately characterised by just one curve for steering torque and one for steering angle.

Simulation-driven design of helmets for head impact protection using an injury-based criterion

The current paper suggests a new procedure for designing helmets for head impact protection for users such as motorcycle riders. According to the approach followed here, a helmet is mounted on a featureless Hybrid 3 headform that is used in assessing vehicles for compliance to the FMVSS 201 regulation in the USA for upper interior head impact safety. The requirement adopted in the latter standard, i.e. not exceeding a threshold HIC(d) limit of 1000, is applied in the present study as a likely criterion for adjudging the efficacy of helmets. An impact velocity of 6 m/s (13.5 mph) for the helmet-headform system striking a rigid target can probably be acceptable for ascertaining a helmet's effectiveness as a countermeasure for minimizing the risk of severe head injury. The proposed procedure is demonstrated with the help of a validated LS-DYNA model of a featureless Hybrid 3 headform in conjunction with a helmet model comprising an outer polypropylene shell to the inner surface of which is bonded a protective polyurethane foam padding of a given thickness. Based on simulation results of impact on a rigid surface, it appears that a minimum foam padding thickness of 40 mm is necessary for obtaining an acceptable value of HIC(d).

Artisanal containers and transportation for smoke-dried fish in Nigeria

The packaging containers and means of transportation for Nigerian smoke-dried fish from harvesting all through the post-harvest chain were described. Sacks, paper cartons, wooden rackets, cane and bamboo baskets were predominantly used packaging containers. Means of transportation ranged from wheelbarrows, motorcycle, lorries, to pick-up vehicles and trucks. The major area of improvement is seen in packaging at the wholesale level. To overcome the constraints within the system, both the public and private sectors must provide effective services that benefit fishermen, processors, wholesalers, retailers, organisation and other key participants that make the work. Suggestions for reducing post harvest losses and improving the efficiency of the existing distribution system, based on the various need of the stake holders and the socio-cultural settings of the application were proffered

Lehiaketako motor baten erditxasiaren diseinua

[EU]Proiektu honek lehiaketarako moto baten erditxasia garatzen du, baita txasira lotuta egongo den modua ere. Erditxasia pieza estruktural bat da eta nahiz eta agian beharrezkoa ez izan lehiaketako moto batean, izan ere hauetan pilotuek ipurdia oso aurrean kokatzen dute pisua txasira bideratuz, moto guztiek duten atal bat da eta pertsonaren pisua eta honek egiturari eragiten dizkion indar eta esfortzuak eusteko erabiltzen da. Kasu batzuetan txasiaren beraren barnean egoten da zati hau eta beraz dena pieza bat izaten da, baina gure kasuan biak, erditxasia eta txasia elkarri lotuta egongo dira. Hasteko erditxasi hau zein eratara fabrikatua izan daitekeen aztertuko da(hodi, txapa…), eta modu bakoitzaren abantailak eta desabantailak ikusi beharko dira azkenik nola egingo den aukeratzeko. Honela gure piezaren eboluzio bat emango da guk behar ditugun exijentzia teknikoak bete ditzan eta ekonomikoki ere bideragarria izan dadin. Amaitzeko pieza bere lekuan bermatzeko beharko diren elementu laguntzaileak ere kalkulatu edo aukeratu beharko dira, lehiaketan dugun portaera guk nahi duguna izan dadin.

Lehiaketako motorraren txasisaren optimizazio erresistentea

[EU]Lan honetan lehiaketako motorraren txasisaren optimizazio erresistentea egin nahi da. Txasisaren hasierako diseinutik abiatuz, diseinua optimizatuko da zona konkretu batean, bertan eragina duten indarrak eutsi ditzan ahalik eta pisu gutxienarekin. Lana egin ahal izateko, Motostudent txapelketatik lortu diren datuak erabiliko dira, honenbestez, erabiliko diren datuak errealak izango dira eta beraz baita emaitzak ere. Diseinua eta bere analisi estatiko egiteko erabiliko den softwarea, Creo 2.0 izango da.