兰州重离子加速器冷却储存环脉冲开关电源

介绍了兰州重离子加速器冷却储存环 (HIRFL CSR)电源系统 ,对其中脉冲开关电源作了详细介绍。主要讨论了脉冲开关电源的工作原理 ,研制了一台样机 ,并给出了实验结果

束流强度探测变压器

兰州重离子加速器冷却储存环工程 (HIRFL CSR)主环和实验环上带电粒子束流强度的测量和监视拟由环型束流变压器实现 .通过对各种磁芯性能的分析和比较 ,束流变压器磁芯材料最终采用环形高磁导率超微晶合金 ,可测量束流脉冲的频率范围为 0 .2 - 2MHz .选择低噪声放大器将感应信号适当放大 ,可以实现对最小流强为 1μA束流的测量 .

放射性核束在生物医学中的应用

不同衰变方式和半衰期的放射性核束在生物医学领域有不同应用。本文评述了自 2 0世纪70年代中期美国LBL实验室首次产生高能放射性核束以来 ,世界范围内利用放射性核束开展的生物医学应用研究情况 ,并提出了一些可在兰州放射性束流线 (RIBLL)和将要建成的兰州重离子加速器冷却储存环 (HIRFL -CSR)装置上进行的生物医学应用研究的设想。

兰州重离子冷却储存环超高真空系统首台样机的研制

介绍了兰州重离子冷却储存环 (HIRFL -CSR)超高真空系统首台样机的研制过程 ,给出了实验结果。介绍各真空室结构 ,对关键标准设备进行了测试与选型。根据实验结果估算出极限真空条件下材料的表面出气率 ;根据公式估算出钛升华泵的有效抽速并通过实验得到证实 ;对真空烘烤装置的初步工作也作了介绍。样机达到了 3× 10 -9Pa的设计指标 ,结果表明HIRFL -CSR工程真空系统的设计方案是可行的

兰州重离子加速器冷却储存环射频堆积过程模拟

考虑了重离子冷却储存环中粒子纵向相振荡的运动特性及电子冷却的作用 ,模拟兰州重离子加速器冷却储存环 (HIRFL CSR)主环中的射频堆积过程 ,给出了高频参数在射频堆积过程中随时间的变化曲线 ,为高频腔的设计及机器运行时的参数预置提供了理论依据

电子束在弯曲螺线管中的运动

为研究 HIRFL-CSR电子冷却装置中电子束穿过电子冷却装置中弯曲螺线管后电子横向能量的变化 ,用 Poisson程序计算出弯曲螺线管的磁场分布 ,考虑了空间电荷效应 ,用数值方法模拟计算了电子在弯曲螺线管中的运动情况 ,得到了电子束横向能量变化最小时磁场各分量与电子束能量和弯曲螺线管几何尺寸之间的关系 ,并获得了电子束横向能量在束流截面的空间分布

THEORETICAL STUDY ON pp -> pn pi(+) REACTION AT MEDIUM ENERGIES

The pp -> pn pi(+) reaction is a channel with the largest total cross section for pp collision in COSY/CSR energy region. In this work, we investigate individual contributions from various N* and Delta* resonances with mass up to about 2 GeV for the pp -> pn pi(+) reaction. We extend a resonance model, which can reproduce the observed total cross section quite well, to give theoretical predictions of various differential cross sections for the present reaction at T-p = 2.88 GeV. It could serve as a reference for identifying new physics in the future experiments at HIRFL-CSR.

Beam matching between SFC and SSC

The beam matching status between the two isochronous cyclotrons in the Heavy Ion Research Facility at the Lanzhou-Cooling Storage Ring (HIRFL-CSR) is described. Several methods which can be used to accomplish 100% matching are proposed. By comparing of them, the best method is determined. The advantage due to this method is discussed.

Fast simulation of the forward tracking detector of HPLUS

The necessity of installing a forward tracking detector stack is discussed for the Hadron Physics LanzhoU Spectrometer(HPLUS). A local tracker is developed to solve the multi-track finding problem. The track candidates are searched iteratively via Hough Transform. The fake tracks are removed by a least square fitting process. With this tracker we have studied the feasibility of pp -> pp + phi(-> K+K-), a typical physical channel proposed on HPLUS. The single track momentum resolution due to the uncertainty of the positioning in FTD is 1.3%. The multiple scattering effect contributes about 20% to the momentum resolution in the FTD coverage. The width and the signal-to-background ratio of the reconstructed phi are 1.51 MeV and 4.36, respectively, taking into account the direct Kaon channel pp -> pp + K+K- as background. The geometry coverage of FTD for phi events is about 85.4%. Based on the current fast simulation and estimation, the geometrical configuration of FTD meets the physical requirement of HPLUS under the current luminosity and multiplicity conditions. The tracker is applicable in the full simulation coming next and is extendable to other tracking component of HPLUS.

Study of the LED based light calibration system for neutron wall detector

The light calibration system is one of the key components of Neutron Wall detector. It is used to calibrate the electronics and to monitor the long-term stability of the detector modules. With the detaile investigations, a calibration system with high-power LED (3W) driven by the fast pulses has been carried out. It is also tested together with the detector module of the Neutron Wall and the result of the preliminary calibration demonstrates that it fulfills the needs. It's a new design proposal to the light calibration system of the fast scintillator detector.

FIRST ISOCHRONOUS MASS MEASUREMENTS AT CSRe

With the commissioning of the Cooler Storage Ring at the Heavy Ion Research Facility in Lanzhou (HIRFL-CSR), a pilot experiment operating the CSRe in isochronous mode to test the power of HIRFL-CSR for measuring the mass of the short-lived nucleus was performed in December of 2007. The transition point gamma t of CSRe in isochronous mode is 1.395 which corresponds to the energy about 368 MeV/u for the ions with atomic number-to-charge ratio A/q = 2. The fragments with A/q = 2 of Ar-36 were injected into CSRe and their revolution frequencies were measured with a fast time pick-up detector with a thin foil in the circulating path of the ions. A mass resolution of better than 105 for m/Delta m was achieved.

ATOMIC PHYSICS RESEARCHES AT COOLER STORAGE RING IN LANZHOU

The commissioning of the cooler storage rings (CSR) was successful, and the facility provides new possibilities for atomic physics with highly charged ions. Bare carbon, argon ions, were successfully stored in the main ring CSRm, cooled by cold electron beam, and accelerated up to 1 GeV/u. Heavier ions as Xe44+ and Kr28+ were also successfully stored in the CSRs. Both of the rings are equipped with new generation of electron coolers which can provide different electron beam density distributions. Electron-ion interactions, high precision X-ray spectroscopy, complete kinematical measurements for relativistic ion-atom collisions will be performed at CSRs. Laser cooling of heavy ions are planned as well. The physics programs and the present status will be summarized.

兰州重离子加速器冷却储存环主环二极铁电源设计；Design of main ring dipole power supply for Heavy Ion Research Facility in Lanzhou-Cooling Storage Ring

主环二极铁电源是兰州重离子加速器冷却储存环(HIRFL-CSR)工程的关键设备和指标要求最高的一台电源,采用了独特的拓扑和控制策略。为满足峰值功率3.15MW(3kA,1.45kV)的输出能力和快脉冲要求,采用了晶闸管整流并联脉宽调制补偿单元的主电路拓扑结构和特殊的控制方式,这套综合方案确保电源满足了全部技术指标。本文介绍了该拓扑结构的原理和优势,讨论了为满足±2×10-4的跟踪误差的要求而采用的控制拓扑和双基准给定的原理,并简介了调试过程和近年来的运行和改进情况。

基于P2P技术的CSRe冷却装置控制系统设计；Design of Control System for CSRe Cooling Equipment Based on P2P Technology

HIRFL-CSR工程对CSRe冷却装置电子冷却部分的控制系统在实时性和可靠性方面提出了非常高的要求。电子冷却工作环境复杂,各种干扰难以预测。从电子冷却的控制系统改进出发,以实现电子冷却的自动调束为目标,以高端FPGA和ARM嵌入式系统为基础,采用P2P通讯技术和神经元网络算法来实现对电子冷却的自动控制。该控制系统对电子冷却控制的完善提供了先进的硬件平台和软件实现方案。

初步的IMP重离子治疗计划系统；A Preliminary Version of Heavy Ion Treatment Planning System at IMP

中国科学院近代物理研究所基于兰州重离子研究装置(HIRFL/HIRFL-CSR),在被动型束流配送系统下采用二维分层适形照射治疗技术开展重离子治癌临床试验研究。为了更好地利用重离子束在肿瘤放射治疗中的生物物理优势并保障重离子临床治疗试验的顺利实施,一个初级版本的重离子治疗计划系统已经设计完成。此计划系统是针对被动型束流配送系统下的二维分层适形照射治疗方式来进行设计的。介绍了此系统的设计框架、可提供的功能以及利用宽束算法进行剂量计算在此系统中的实现。通过人体仿真体模实验证实由该治疗计划系统给出的靶区计划剂量与实测剂量的偏差在5%之内。最后讨论了设计较为完备的重离子治疗计划系统仍需解决的问题。