Nuovi ingredienti funzionali per l'applicazione in campo alimentare

The Mediterranean diet is rich in healthy substances such as fibres, vitamins and phenols. Often these molecules are lost during food processing. Olive oil milling waste waters, brans, grape skins are some of the most relevant agri-food by-products in the Mediterranean countries. These wastes are still rich in extremely valuable molecules, such as phenolic antioxidants, that have several interesting health promoting properties. Using innovative environmental friendly technologies based in the rational use of enzymatic treatment is possible to obtain from agri-food by-products new ingredients containing antioxidants that can be used as functional ingredients in order to produce fortified foods. These foods, having health protecting/promoting properties, on top of the traditional nutritional properties, are attracting consumer’s attentions due to the increasing awareness on health protection through prevention. The use of these new ingredients in different food preparation was studied in order to evaluate the effects that the food processing might have on the antioxidant fraction, the effect of these ingredient on foods appearances as well as the impact in terms of taste and scent, crucial feature for the acceptability of the final product. Using these new ingredients was possible to produce antioxidant bred, pasta, cheese, cookies and ice-cream. These food products retains very well the antioxidant properties conferred by the added ingredients despite the very different treatments that were performed. The food obtained had a good palatability and in some cases the final product had also a good success on the market.

Wet and dry model granulates under mechanical load : a confocal microscopy study

Granular matter, also known as bulk solids, consists of discrete particles with sizes between micrometers and meters. They are present in many industrial applications as well as daily life, like in food processing, pharmaceutics or in the oil and mining industry. When handling granular matter the bulk solids are stored, mixed, conveyed or filtered. These techniques are based on observations in macroscopic experiments, i.e. rheological examinations of the bulk properties. Despite the amply investigations of bulk mechanics, the relation between single particle motion and macroscopic behavior is still not well understood. For exploring the microscopic properties on a single particle level, 3D imaging techniques are required.rnThe objective of this work was the investigation of single particle motions in a bulk system in 3D under an external mechanical load, i.e. compression and shear. During the mechanical load the structural and dynamical properties of these systems were examined with confocal microscopy. Therefor new granular model systems in the wet and dry state were designed and prepared. As the particles are solid bodies, their motion is described by six degrees of freedom. To explore their entire motion with all degrees of freedom, a technique to visualize the rotation of spherical micrometer sized particles in 3D was developed. rnOne of the foci during this dissertation was a model system for dry cohesive granular matter. In such systems the particle motion during a compression of the granular matter was investigated. In general the rotation of single particles was the more sensitive parameter compared to the translation. In regions with large structural changes the rotation had an earlier onset than the translation. In granular systems under shear, shear dilatation and shear zone formation were observed. Globally the granular sediments showed a shear behavior, which was known already from classical shear experiments, for example with Jenike cells. Locally the shear zone formation was enhanced, when near the applied load a pre-diluted region existed. In regions with constant volume fraction a mixing between the different particle layers occurred. In particular an exchange of particles between the current flowing region and the non-flowing region was observed. rnThe second focus was on model systems for wet granular matter, where an additional binding liquid is added to the particle suspension. To examine the 3D structure of the binding liquid on the micrometer scale independently from the particles, a second illumination and detection beam path was implemented. In shear and compression experiments of wet clusters and bulk systems completely different dynamics compared to dry cohesive models systems occured. In a Pickering emulsion-like system large structural changes predominantly occurred in the local environment of binding liquid droplets. These large local structural changes were due to an energy interplay between the energy stored in the binding droplet during its deformation and the binding energy of particles at the droplet interface. rnConfocal microscopy in combination with nanoindentation gave new insights into the single particle motions and dynamics of granular systems under a mechanical load. These novel experimental results can help to improve the understanding of the relationship between bulk properties of granular matter, such as volume fraction or yield stress and the dynamics on a single particle level.rnrn

Leicht zu reinigende Schichten auf lasergesinterten Rapid-Prototyping Bauteilen

Das Fraunhofer IPA hat mit ein Verfahren entwickelt, durch welches lasergesinterte Rapid Prototyping Bauteile gut reinigbar beschichtet werden können. Ziel ist die Nutzung von Rapid-Prototyping Bauteilen in der Lebensmittel verarbeitenden Industrie. Dazu werden die rauen Oberflächen der Bauteile eingeebnet und mit einer gut reinigbaren Schicht umgeben. In Temperaturwechseltests und Reinigungstest durch unabhängige Institute konnte eine gute Reinigbarkeit der so beschichteten Rapid Prototyping Bauteile nachgewiesen werden. Die so beschichteten Rapid Prototyping Bauteile entsprechen nach einer Prüfung durch das Forschungsinstitut Weihenstephan den Hygienic Design Anforderungen gemäß den Vorgaben der EHEDG.

Pasteurization of Apple Cider with UV Irradiation

In a period of increasing concern about food safety, food poisoning outbreaks where unpasterurized apple cider or apple juice was found contaminated with Escherichia coli 0157:H7 reinforces the need for using the best technologies in apple cider production. Most apple cider is sold as an unpasteurized raw product. Because of their acidity, it was believed that juice products do not usually contain microorganisms such as E. coli 0157:H7, Salmonella, and Crytosporidium. Yet all of these foodborne pathogens are capable of being transmitted in unpasteurized juices. It is known that these pathogens can survive for several weeks in a variety of acidic juices. Although heat pasteurization is probably the best method to eliminate these pathogens, it is not the most desirable method as it changes sensory properties and also is very costly for small to mid-sized apple cider processors. Pasteurization of apple cider with Ultraviolet Irradiation (UV) is a potential alternative to heat pasteurization. Germicidal W irradiation is effective in inactivating microorganisms without producing undesirable by-products and changing sensory properties. Unpasteurized raw apple cider from a small local processor was purchased for this study. The effects of physical parameters, exposure time and dosage on the W treatment efficacy were examined as well as the effects of the UV light on apple cider quality. W light with principal energy at a wavelength of 254.7 nm, was effective in reducing bacteria (E .coli, ATCC 25922) inoculated apple cider. The W dosage absorbed by the apple cider was mathematically calculated. A radiation dose of 8,777 μW-s/cm2 reduced bacteria an average of 2.20 logs and in multiple passes, the FDA mandated 5-log reduction was achieved. Sensory analysis showed there was no significant difference between the W treated and non-treated cider. Experiments with W treated apple cider indicated a significant (p < 0.01) extension of product shelf life through inhibition of yeast and mold growth. The extension of the researched performed is applicable to other fruit juice processing operations.

HACCP Drives Safe Seafood

Seafood is part of a healthy diet, but how can you be sure that the seafood on your plate has not become contaminated somewhere between the boat and your home? HACCP training helps seafood processors and handlers meet FDA regulations to control potential hazards along the way.

La construcción social de productos agroalimentarios típicos en procesos de desarrollo territorial local : Disputas entre saberes teóricos y saberes prácticos

Nuestro trabajo parte de proyectos de Extensión Universitaria en el territorio costero de Berisso, a 15 km. de la Facultad de Ciencias Agrarias y Forestales de La Plata. La finalidad del proceso de intervención fue mejorar las condiciones socio-económicas de productores familiares en un contexto de recuperación de oficios, prácticas y saberes. El camino iniciado de revalorización de los oficios de viticultor y vitivinicultor, durante los últimos doce años, ha dado como resultado un incipiente resurgimiento de la actividad agroalimentaria en Berisso. Nacen así adaptaciones, innovaciones propias de la interacción social y como resultado del propio proceso de intervención. Las propuestas que se plasmaron en proyectos compartidos por Ciencias Exactas y Agronomía (2006, 2007 y 2010), en los que uno de los ejes trabajados fue la construcción participativa de prácticas en la producción primaria (viñedos y montes de ciruelos) y agroindustrial (vinos, fermentados) permitieron contribuir al mejoramiento y puesta en valor de productos agroalimentarios típicos. En el propio proceso educativo surgen conflictos que presentan obstáculos a la construcción conjunta de saberes, dificultando la incorporación de conocimientos que contribuyen al aseguramiento de la calidad de los productos. Esta construcción conjunta de conocimientos no ha sido armoniosa y ha generado, tanto en los productores como en los técnicos involucrados, un proceso de reflexión acerca de lo que es una "buena práctica agrícola o de manufactura" y lo que no lo es. Así, el debate se inscribe en la valorización de distintos tipos de saberes: los saberes codificados versus los tácitos, que son encarnados por diferentes personas: técnicos y productores respectivamente

La construcción social de productos agroalimentarios típicos en procesos de desarrollo territorial local : Disputas entre saberes teóricos y saberes prácticos

Nuestro trabajo parte de proyectos de Extensión Universitaria en el territorio costero de Berisso, a 15 km. de la Facultad de Ciencias Agrarias y Forestales de La Plata. La finalidad del proceso de intervención fue mejorar las condiciones socio-económicas de productores familiares en un contexto de recuperación de oficios, prácticas y saberes. El camino iniciado de revalorización de los oficios de viticultor y vitivinicultor, durante los últimos doce años, ha dado como resultado un incipiente resurgimiento de la actividad agroalimentaria en Berisso. Nacen así adaptaciones, innovaciones propias de la interacción social y como resultado del propio proceso de intervención. Las propuestas que se plasmaron en proyectos compartidos por Ciencias Exactas y Agronomía (2006, 2007 y 2010), en los que uno de los ejes trabajados fue la construcción participativa de prácticas en la producción primaria (viñedos y montes de ciruelos) y agroindustrial (vinos, fermentados) permitieron contribuir al mejoramiento y puesta en valor de productos agroalimentarios típicos. En el propio proceso educativo surgen conflictos que presentan obstáculos a la construcción conjunta de saberes, dificultando la incorporación de conocimientos que contribuyen al aseguramiento de la calidad de los productos. Esta construcción conjunta de conocimientos no ha sido armoniosa y ha generado, tanto en los productores como en los técnicos involucrados, un proceso de reflexión acerca de lo que es una "buena práctica agrícola o de manufactura" y lo que no lo es. Así, el debate se inscribe en la valorización de distintos tipos de saberes: los saberes codificados versus los tácitos, que son encarnados por diferentes personas: técnicos y productores respectivamente

La construcción social de productos agroalimentarios típicos en procesos de desarrollo territorial local : Disputas entre saberes teóricos y saberes prácticos

Nuestro trabajo parte de proyectos de Extensión Universitaria en el territorio costero de Berisso, a 15 km. de la Facultad de Ciencias Agrarias y Forestales de La Plata. La finalidad del proceso de intervención fue mejorar las condiciones socio-económicas de productores familiares en un contexto de recuperación de oficios, prácticas y saberes. El camino iniciado de revalorización de los oficios de viticultor y vitivinicultor, durante los últimos doce años, ha dado como resultado un incipiente resurgimiento de la actividad agroalimentaria en Berisso. Nacen así adaptaciones, innovaciones propias de la interacción social y como resultado del propio proceso de intervención. Las propuestas que se plasmaron en proyectos compartidos por Ciencias Exactas y Agronomía (2006, 2007 y 2010), en los que uno de los ejes trabajados fue la construcción participativa de prácticas en la producción primaria (viñedos y montes de ciruelos) y agroindustrial (vinos, fermentados) permitieron contribuir al mejoramiento y puesta en valor de productos agroalimentarios típicos. En el propio proceso educativo surgen conflictos que presentan obstáculos a la construcción conjunta de saberes, dificultando la incorporación de conocimientos que contribuyen al aseguramiento de la calidad de los productos. Esta construcción conjunta de conocimientos no ha sido armoniosa y ha generado, tanto en los productores como en los técnicos involucrados, un proceso de reflexión acerca de lo que es una "buena práctica agrícola o de manufactura" y lo que no lo es. Así, el debate se inscribe en la valorización de distintos tipos de saberes: los saberes codificados versus los tácitos, que son encarnados por diferentes personas: técnicos y productores respectivamente

Japanese import survey : descriptive analysis

Food importers, such as wholesalers and food processing firms, play an important role in sourcing food from abroad. They are also responsible for ensuring that imported food meets the food safety standards of the importing country. Often, assurance of conformity is done in collaboration with exporters. Thus, importers can influence how supply chains in developing countries are organized. This paper uses a unique dataset obtained from the Japanese market to examine how importers select suppliers and assure food quality.

A portable NIR device for the optical supervision of milk coagulation process

The coagulation of milk is the fundamental process in cheese-making, based on a gel formation as consequence of physicochemical changes taking place in the casein micelles, the monitoring the whole process of milk curd formation is a constant preoccupation for dairy researchers and cheese companies (Lagaude et al., 2004). In addition to advances in composition-based applications of near infrared spectroscopy (NIRS), innovative uses of this technology are pursuing dynamic applications that show promise, especially in regard to tracking a sample in situ during food processing (Bock and Connelly, 2008). In this way the literature describes cheese making process applications of NIRS for curd cutting time determination, which conclude that NIRS would be a suitable method of monitoring milk coagulation, as shown i.e. the works published by Fagan et al. (Fagan et al., 2008; Fagan et al., 2007), based in the use of the commercial CoAguLite probe (with a LED at 880nm and a photodetector for light reflectance detection).

Advanced characterization of a coffee fermenting tank by multi-distributed wireless sensors: spatial interpolation and phase diagrams.

In coffee processing the fermentation stage is considered one of the critical operations by its impact on the final quality of the product. However, the level of control of the fermentation process on each farm is often not adequate; the use of sensorics for controlling coffee fermentation is not common. The objective of this work is to characterize the fermentation temperature in a fermentation tank by applying spatial interpolation and a new methodology of data analysis based on phase space diagrams of temperature data, collected by means of multi-distributed, low cost and autonomous wireless sensors. A real coffee fermentation was supervised in the Cauca region (Colombia) with a network of 24 semi-passive TurboTag RFID temperature loggers with vacuum plastic cover, submerged directly in the fermenting mass. Temporal evolution and spatial distribution of temperature is described in terms of the phase diagram areas which characterizes the cyclic behaviour of temperature and highlights the significant heterogeneity of thermal conditions at different locations in the tank where the average temperature of the fermentation was 21.2 °C, although there were temperature ranges of 4.6°C, and average spatial standard deviation of ±1.21ºC. In the upper part of the tank we found high heterogeneity of temperatures, the higher temperatures and therefore the higher fermentation rates. While at the bottom, it has been computed an area in the phase diagram practically half of the area occupied by the sensors of the upper tank, therefore this location showed higher temperature homogeneity

Hyperspectral to multispectral imaging for detection of tree nuts and peanut traces in wheat flour

In current industrial environments there is an increasing need for practical and inexpensive quality control systems to detect the foreign food materials in powder food processing lines. This demand is especially important for the detection of product adulteration with traces of highly allergenic products, such as peanuts and tree nuts. Manufacturing industries dealing with the processing of multiple powder food products present a substantial risk for the contamination of powder foods with traces of tree nuts and other adulterants, which might result in unintentional ingestion of nuts by the sensitised population. Hence, the need for an in-line system to detect nut traces at the early stages of food manufacturing is of crucial importance. In this present work, a feasibility study of a spectral index for revealing adulteration of tree nut and peanut traces in wheat flour samples with hyperspectral images is reported. The main nuts responsible for allergenic reactions considered in this work were peanut, hazelnut and walnut. Enhanced contrast between nuts and wheat flour was obtained after the application of the index. Furthermore, the segmentation of these images by selecting different thresholds for different nut and flour mixtures allowed the identification of nut traces in the samples. Pixels identified as nuts were counted and compared with the actual percentage of peanut adulteration. As a result, the multispectral system was able to detect and provide good visualisation of tree nut and peanut trace levels down to 0.01% by weight. In this context, multispectral imaging could operate in conjuction with chemical procedures, such as Real Time Polymerase Chain Reaction and Enzyme-Linked Immunosorbent Assay to save time, money and skilled labour on product quality control. This approach could enable not only a few selected samples to be assessed but also to extensively incorporate quality control surveyance on product processing lines.

Hyperspectral to multispectral imaging for detection of tree nuts and peanut traces in wheat flour.

In current industrial environments there is an increasing need for practical and inexpensive quality control systems to detect the foreign food materials in powder food processing lines. This demand is especially important for the detection of product adulteration with traces of highly allergenic products, such as peanuts and tree nuts. Manufacturing industries dealing with the processing of multiple powder food products present a substantial risk for the contamination of powder foods with traces of tree nuts and other adulterants, which might result in unintentional ingestion of nuts by the sensitised population. Hence, the need for an in-line system to detect nut traces at the early stages of food manufacturing is of crucial importance. In this present work, a feasibility study of a spectral index for revealing adulteration of tree nut and peanut traces in wheat flour samples with hyperspectral images is reported. The main nuts responsible for allergenic reactions considered in this work were peanut, hazelnut and walnut. Enhanced contrast between nuts and wheat flour was obtained after the application of the index. Furthermore, the segmentation of these images by selecting different thresholds for different nut and flour mixtures allowed the identification of nut traces in the samples. Pixels identified as nuts were counted and with the actual percentage of peanut adulteration. As a result, the multispectral system was able to detect and provide good visualisation of tree nut and peanut trace levels down to 0.01% by weight. In this context, multispectral imaging could operate in conjuction with chemical procedures, such as Real Time Polymerase Chain Reaction and Enzyme-Linked Immunosorbent Assay to save time, money and skilled labour on product quality control. This approach could enable not only a few selected samples to be assessed but also to extensively incorporate quality control surveyance on product processing lines.

Biotechnology: Enhancing human nutrition in developing and developed worlds

While the last 50 years of agriculture have focused on meeting the food, feed, and fiber needs of humans, the challenges for the next 50 years go far beyond simply addressing the needs of an ever-growing global population. In addition to producing more food, agriculture will have to deal with declining resources like water and arable land, need to enhance nutrient density of crops, and achieve these and other goals in a way that does not degrade the environment. Biotechnology and other emerging life sciences technologies offer valuable tools to help meet these multidimensional challenges. This paper explores the possibilities afforded through biotechnology in providing improved agronomic “input” traits, differentiated crops that impart more desirable “output” traits, and using plants as green factories to fortify foods with valuable nutrients naturally rather than externally during food processing. The concept of leveraging agriculture as green factories is expected to have tremendous positive implications for harnessing solar energy to meet fiber and fuel needs as well. Widespread adaptation of biotech-derived products of agriculture should lay the foundation for transformation of our society from a production-driven system to a quality and utility-enhanced system.

A extrusão em tecnologia alimentar: aplicações, características dos produtos, composição e tendências futuras

A extrusão de alimentos envolve transformações moleculares complexas que permitem grande diversidade nos produtos extrudidos existentes e nas suas propriedades físicas, químicas, sensoriais e nutricionais. Neste artigo são apresentadas aplicações atuais da extrusão na indústria alimentar, assim como as características dos produtos extrudidos.