Natiivin Android-pelin käyttöliittymän skaalautuminen ja suorituskyvyn optimointi

Tässä työssä esiteltiin Android laitteisto- ja sovellusalustana sekä kuvattiin, kuinka Android-pelisovelluksen käyttöliittymä voidaan pitää yhtenäisenä eri näyttölaitteilla skaalauskertoimien ja ankkuroinnin avulla. Toisena osiona työtä käsiteltiin yksinkertaisia tapoja, joilla pelisovelluksien suorituskykyä voidaan parantaa. Näistä tarkempiin mittauksiin valittiin matalatarkkuuksinen piirtopuskuri ja näkymättömissä olevien kappaleiden piilotus. Mittauksissa valitut menetelmät vaikuttivat demosovelluksen suorituskykyyn huomattavasti. Tässä työssä rajauduttiin Android-ohjelmointiin Java-kielellä ilman ulkoisia kirjastoja, jolloin työn tuloksia voi helposti hyödyntää mahdollisimman monessa eri käyttökohteessa.

Asiakkuudenhallinnan kehittäminen

Opinnäytetyön toimeksiantaja on suomalainen maatalouskonekaupan moniosaaja, jonka pääasiallisiin liiketoimiin kuuluu maatalouskoneiden maahantuonti, niiden myynti edelleen Suomessa sekä kannattavan rehuntekoketjun tarjoaminen asiakkailleen periaatteella ”nurmesta maitolasiin”. Työn tavoitteena oli avustaa perheyritystä sen asiakashallintaohjelmiston käyttöön ottamisessa. Työn ensimmäinen tavoite oli määrittää yrityksen asiakkuudenhallintaohjelmiston vaatimukset. Toinen tavoite oli selvittää yrityksen asiakashallinnan tämänhetkinen tila. Kolmas tavoite oli selvittää jo nykyisin käytössä olevan ohjelmiston taipuisuutta ja sen soveltuvuutta asiakkuudenhallintaohjelmistona. Työ on toteutettu kvalitatiivista tutkimusta apuna käyttäen, ja analyysiaineisto on kerätty sekundaarisista lähteistä, lähinnä kirjallisista teoksista sekä internetistä. Yrityksen henkilöstö on ollut sisäisen tiedon lähteenä. Opinnäytetyö auttaa toimeksiantajayritystä CRM – projektin tavoitteiden, mahdollisuuksien sekä mahdollisten hidasteiden selvittämisessä. Työn tuloksien avulla projektijohto voi määrittää ohjelmiston CRM – osuuden käyttöönottoon sekä aikatauluun vaadittavat resurssit.

4D-aikataulutuksen mahdollisuudet voimalaitosprojekteissa

4D-aikataulutus yhdistää aikataulun ja 3D-mallin animaatioelokuvaksi, jossa projektin rakentuminen esitetään ajan funktiona. Tässä työssä on perehdytty 4D-aikataulutukseen voimalaitosprojektien kannalta. Lisäksi työssä on perehdytty projektijohtamiseen, ja sitä kautta aikataulun merkitykseen projekteille. Työn lopuksi on esitetty 4D-aikataulutuksen käyttöönottoa ja siinä huomioon otettavia seikkoja. 4D-aikataulutuksen avulla projektin asennussuunnittelua voidaan toteutusvaiheessa tehostaa, sillä 4D-aikataulutuksen avulla asennusten törmäysten tarkastelua voidaan tehdä hyvissä ajoin suunnitteluvaiheessa. Lisäksi vaihtoehtoisten asennusmallien tekeminen on mahdollista, ja niitä voidaan keskenäään vertailla. Projektit voivat 4D-aikataulutuksen avulla analysoida myös aikatauluviiveitä, sekä esittää vaihtoehtoisia toteutustapoja projektille. 4D-aikataulutus mahdollistaa myös projektivaiheiden jälkeisen käytön. Projektin jälkeen projektin suunnitteltua ja toteutunutta aikataulua voidaan analysoida keskenään ja siten saada toisiin projekteihin vertailukelpoista tietoa. Lisäksi seisokkitöiden suunnittelussa on 4D-aikataulun avulla mahdollista suunnitella töiden järjestäminen tehokkaasti sekä ottaa myös turvallisuusnäkökohdat huomioon.

The effects of congestion in the daily management of a trauma hospital

Today’s healthcare organizations are under constant pressure for change, as hospitals should be able to offer their patients the best possible medical care with limited resources and, at the same time, to retain steady efficiency level in their operation. This is challenging, especially in trauma hospitals, in which the variation in the patient cases and volumes is relatively high. Furthermore, the trauma patient's care requires plenty of resources as most the patients have to be treated as single cases. Occasionally, the sudden increases in demand causes congestion in the operations of the hospital, which in Töölö hospital appears as an increase in the surgery waiting times within the yellow urgency class patients. An increase in the surgery waiting times may cause the diminution of the patient's condition, which also raises the surgery risks. The congestion itself causes overloading of the hospital capacity and staff. The aim of this master’s thesis is to introduce the factors contributing to the trauma process, and to examine the correlation between the different variables and the lengthened surgery waiting times. The results of this study are based on a three-year patient data and different quantitative analysis. Based on the analysis, a daily usable indicator was created in order to support the decision making in the operations management. By using the selected indicator, the effects of congestion can be acknowledged and the corrective action can also be taken more proactively.

Koneinvestointien elinkaarikustannusmalli

Työn tavoitteena oli rakentaa käyttökelpoinen elinkaarikustannusmalli, jonka avulla voidaan arvioida investoitavien uusien koneiden elinkaaren aikaisia kustannuksia. Elinkaarikustannusmalli on rakennettu Microsoft Excel -ohjelman avulla. Mallin tavoitteena oli saada tarkempaa tietoa koneiden aiheuttamista elinkaarikustannuksista. Aiemmin tällaista mallia ei ole ollut käytössä, vaan investointien paremmuutta on paljolti verrattu takaisinmaksuajan ja hankintahinnan perusteella. Työssä hyödynnetään investointi- ja elinkaarilaskennan teorioita elinkaarikustannusmallin rakentamiseen. Työn empiirisessä osiossa käydään läpi, miten elinkaarikustannusmalli on rakennettu ja millaisia ominaisuuksia malli sisältää. Empiirisessä osassa myös testataan rakennetun mallin toimivuutta ja lasketaan elinkaarikustannukset yhdelle koneinvestoinnille. Teoriaosuudessa käsiteltiin myös elinkaarituottoja mallin jatkokehityksen kannalta. Työn tuloksena saatiin rakennettua käyttökelpoinen elinkaarikustannusmalli, jonka ominaisuuksina ovat sen helppo käyttö ja yksinkertaisuus. Mallia voidaan käyttää useammalle koneinvestointivaihtoehdolle samanaikaisesti ja sitä voidaan helposti laajentaa tulevaisuudessa.

Comparison of Model-Based Flow Rate Estimation Methods in Frequency-Converter-Driven Pumps and Fans

Fluid handling systems such as pump and fan systems are found to have a significant potential for energy efficiency improvements. To deliver the energy saving potential, there is a need for easily implementable methods to monitor the system output. This is because information is needed to identify inefficient operation of the fluid handling system and to control the output of the pumping system according to process needs. Model-based pump or fan monitoring methods implemented in variable speed drives have proven to be able to give information on the system output without additional metering; however, the current model-based methods may not be usable or sufficiently accurate in the whole operation range of the fluid handling device. To apply model-based system monitoring in a wider selection of systems and to improve the accuracy of the monitoring, this paper proposes a new method for pump and fan output monitoring with variable-speed drives. The method uses a combination of already known operating point estimation methods. Laboratory measurements are used to verify the benefits and applicability of the improved estimation method, and the new method is compared with five previously introduced model-based estimation methods. According to the laboratory measurements, the new estimation method is the most accurate and reliable of the model-based estimation methods.

Eleohjaus Google Cardboard-virtuaaliympäristöön käyttäen älypuhelimen kameraa

Tässä opinnäytetyössä on toteutettu ja arvioitu virtuaalitodellisuuteen soveltuvaa käyttöliittymää. Motivaationa työlle oli Google Cardboardin mahdollistama todentuntuinen virtuaalikokemus älypuhelimen hinnalla. Cardboard-ympäristöön ei kuitenkaan ollut olemassa kattavaa käyttöliittymää ja tämän työn tavoitteena olikin selvittää, onko älypuhelimen kameraa mahdollista käyttää eleohjauksen toteuttamiseen niin että ohjaus on käytettävyydeltään kelvollinen ja se tukee läsnäolon tunteen syntymistä. Asian selvittämiseksi kehitettiin testipeli, jolla eleohjausta verrattiin Cardboardin oletuskäyttöliittymään. Koehenkilöt saavuttivat ehdotetulla käyttöliittymällä testipelissä keskimäärin 45-% korkeampia pistemääriä ja lisäksi he arvioivat sen olleen toimiva ja sen synnyttämän läsnäolon tunteen olleen voimakkaampaa.

A Web-Based Environmental Toolkit to Support Small and Medium-Sized Enterprises in the Implementation of Their Own Environmental Management System

With small and medium sized-enterprises (SMEs) taking up the majority of the global businesses, it is important they act in an environmentally responsible manner. Environmental management systems (EMS) help companies evaluate and improve their environmental impact but they often require human, financial, and temporary resources that not all SMEs can provide. This research encompasses interviews with representatives of two small enterprises in Germany to provide insights into their understanding, and knowledge of an EMS and how they perceive their responsibility towards the environment. Furthermore, it presents a toolkit created especially for small and medium-sized enterprises that serves as a simplified version of an EMS based on the ISO 14001 standard and is evaluated by the representatives of the SMEs. Some of the findings are: while being open to the idea of improving their environmental impact, SMEs do not always feel it is their responsibility to do so; they seem to lack the means to fully implement an EMS. The developed toolkit is considered useful and usable and recommendations are drawn for its future enhancement.

The transforming network of a foreign company operating in Mongolia. Case: A Finnish firm in Mongolia

In the globalising business environment ever fewer market areas remain unknown. Mongolia is yet only considered as an isolated strip between two power states. The purpose of this study is to put Mongolia on the map of academic business research. This is done by describing the transforming network of a foreign company operating in Mongolia. The objective of the study is approached through a case study, which presents the transformation of a Finnish company operating in Mongolia. This study aims at providing understanding on how the foreign case company observes the transformations of its network. The transformation within the case company is reflected to the transformations that occur in the Mongolian business environment. This study was conducted through a qualitative, intrinsic case study approach. The empirical data was gathered by using the method of network pictures. The network pictures were completed with the assistance of themed interviews. In order to be able to analyse the transformation within a network, three different time periods were observed: the past period around 2000, the present around 2014, and the estimated future around 2020. The data was collected from four executives positioned either in Finland, Russia or Mongolia. The respondents have a long experience within the case company, they hold managerial position, and therefore were able to offer valuable data for this study. The analytical framework used to analyse the collected data was built on the industrial network model, the ARA (actors-resources-activities)-model. The study shows that the changing business environment of Mongolia was utilised by the case company. In order to better meet the transforming customer wishes, the case company transformed from being a retailer to being a manufacturer. The case company was able to become a pioneer in the market. Thus, the case company has undergone similar kind of rapid transformation as the economy of Mongolia in entirety. This study shows that the general nature of the ARA-model makes it usable for new research contexts. The initial ARA-model offers a way to identify the dimensions of a network and a mean to understand these dimensions. The ARA-model can be applied to different contexts and to all time dimensions, past, present and future. The managerial recommendations offered in this study are directed towards the managers that plan to start operations in Mongolia. While this study is the first of its kind, it offers a good starting point for the future research on the change of Mongolian business networks. Valuable information could, for example, be obtained from a comparative study between the case company of this study and a multinational mining company operating in Mongolia.

Converter-Fed Induction Motor Losses: Determination With IEC Methods

Energy efficiency is an important topic when considering electric motor drives market. Although more efficient electric motor types are available, the induction motor remains as the most common industrial motor type. IEC methods for determining losses and efficiency of converter-fed induction motors were introduced recently with the release of technical specification IEC/TS 60034-2-3. Determining the induction motor losses with IEC/TS 60034-2-3 method 2-3-A and assessing the practical applicability of the method are the main interests of this study. The method 2-3-A introduces a specific test converter waveform to be used in the measurements. Differences between the induction motor losses with a test converter supply, and with a DTC converter supply are investigated. In the IEC methods, the tests are run at motor rated fundamental voltage, which, in practice, requires the frequency converter to be fed with a risen input voltage. In this study, the tests are run on both frequency converters with artificially risen converter input voltage, resulting in rated motor fundamental input voltage as required by IEC. For comparison, the tests are run with both converters on normal grid input voltage supply, which results in lower motor fundamental voltage and reduced flux level, but should be more relevant from practical point of view. According to IEC method 2-3-A, tests are run at rated motor load, and to ensure comparability of the results, the rated load is used in the grid-fed converter measurements, although motor is overloaded while producing the rated torque at reduced flux level. The IEC 2-3-A method requires also sinusoidal supply test results with IEC method 2-1-1B. Therefore, the induction motor losses with the recently updated IEC 60034-2-1 method 2-1-1B are determined at the motor rated voltage, but also at two lower motor voltages, which are according to the output fundamental voltages of the two network-supplied converters. The method 2-3-A was found to be complex to apply but the results were stable. According to the results, the method 2-3-A and the test converter supply are usable for comparing losses and efficiency of different induction motors at the operating point of rated voltage, rated frequency and rated load, but the measurements do not give any prediction of the motor losses at final application. One might therefore strongly criticize the method’s main principles. It seems, that the release of IEC 60034-2-3 as a technical specification instead of a final standard for now was justified, since the practical relevance of the main method is questionable.

Development and Effect Analysis of the Asteri Consultative Auditing Process - Safety and Security Management in Educational Institutions

The Finnish legislation requires for a safe and secure learning environment. However, the comprehensive, risk based safety and security management (SSM) and the management commitment in the implementation and development of the SSM are not mentioned in the legislation. Multiple institutions, operators and researchers have studied and developed safety and security in educational institutions over the past decade. Typically the approach has been fragmented and without bringing up the importance of the comprehensive SSM. The development needs of the safety and security operations in universities have been studied. However, in universities of applied sciences (UASs) and in elementary schools (ESs), the performance level, strengths and weaknesses of the comprehensive SSM have not been studied. The objective of this study was to develop the comprehensive, risk based SSM of educational institutions by developing the new Asteri consultative auditing process and study its effects on auditees. Furthermore, the performance level in the comprehensive SSM in UASs and ESs were studied using Asteri and the TUTOR model developed by the Keski-Uusimaa Department for Rescue Services. In addition, strengths, development needs and differences were identified. In total, 76 educational institutions were audited between the years 2011 and 2014. The study is based on logical empiricism, and an observational applied research design was used. Auditing, observation and an electronic survey were used for data collection. Statistical analysis was used to analyze the collected information. In addition, thematic analysis was used to analyze the development areas of the organizations mentioned by the respondents in the survey. As one of the main contributions, this research presents the new Asteri consultative auditing process. Organizations with low performance levels on the audited subject benefit the most from the Asteri consultative auditing process. Asteri may be usable in many different types of audits, not only in SSM audits. As a new result, this study provides new knowledge on attitudes related to auditing. According to the research findings, auditing may generate negative attitudes and the auditor should take them into account when planning and preparing for audits. Negative attitudes can be compensated by producing added value, objectivity and positivity for the audit and, thus, improve the positive effects of auditing on knowledge and skills. Moreover, as the results of this study shows, auditing safety and security issues do not increase feelings of insecurity, but rather increase feelings of safety and security when using the new Asteri consultative auditing process with the TUTOR model. The results showed that the SSM in the audited UASs was statistically significantly more advanced than that in the audited ESs. However, there is still room for improvement in the ESs and the UASs as the approach to the SSM was fragmented. It can be assumed that the majority of Finnish UASs and ESs do not likely meet the basic level of the comprehensive, risk based the SSM.

Suorituskyvyn mittaaminen valmistavan yrityksen logistiikkatoiminnoissa

Yrityksen hakiessa kasvua vientimarkkinoilta sen logistiikka nousee entistä tärkeämpään rooliin. Jotta tuotteet ovat kilpailukykyisiä kansainvälisillä markkinoilla, tulee tuotteen hinta – laatu – suhde olla kohdallaan, jolloin logistiikan kustannusten pienentäminen ja laadukas toimitusketju ovat varsin keskeisiä tavoitteita. Toimitusketjun eri vaiheiden laatu korostuu, kun kyseessä on räätälöity tuote, jota ei voida korvata varastossa olevalla tuotteella. Näiden tavoitteiden saavuttaminen edellyttää logistiikkaprosessien suorituskyvyn mittaamista ja kehittämistä. Suorituskyvyn mittaamisen avulla voidaan viestiä logistiikalle asetetut tavoitteet ja seurata tavoitteiden toteutumista Tämän työn tavoitteena oli selvittää, miten suorituskykyä voidaan mitata valmistavan yrityksen logistiikkatoiminnoissa. Tarkasteltavana olivat logistiikan prosessit tilauksen vahvistamisesta valmiin tuotteen toimittamiseen asiakkaalle. Työn alussa käytiin läpi suorituskyvyn mittaamista yleisellä tasolla sekä logistiikan mittaamista ja mittareita. Tämän jälkeen aloitettiin mittausjärjestelmän suunnittelu kohdeyrityksen logistiikkaosastolle, sen vision ja strategian pohjalta. Työn tuloksena kohdeyrityksen logistiikkaosastolle kehitettiin suorituskykymittaristo mittareineen. Mittareita eri logistiikkatoimintojen mittaamiseen on varsin runsaasti, ja kaikkia niitä ei ole järkevä liittää osaksi mittaristoa, mutta tilanteiden muuttuessa niitä voidaan vaihtaa tai lisätä tarpeen mukaan.

ATTITUDES TOWARD RUSSIAN CUSTOMERS IN THE FINNISH RETAIL TRADE SECTOR – A salesperson’s point of view

The amount of Russian tourists in Finland has increased significantly in the past years. The impact of Russian tourism to the Finnish retail trade sector is enormous, since Russian tourists often spend a lot of money particularly on shopping. Shopping tourism is mainly focused in the near border cities, such as Imatra and Lappeenranta, and in addition in Helsinki metropolitan area. The purpose of this study is to map the attitudes and perceptions of the sales personnel who are working in the Finnish retail trade sector towards Russian customers and to discover which elements affect these attitudes. The theories in this study are based on cultural elements and elements related to sales behavior and performance. Cultural differences between Finland and Russia, cultural distance and cultural intelligence form the cultural aspect of this study. Customer orientation vs. sales orientation (SOCO), adaptive selling, selling skills and job competency, salesperson’s affect and empathy toward customers, and job autonomy form the elements concerning sales behavior and performance. Furthermore, the attitude – behavior link, based on social psychology is addressed. A survey was conducted in two retail trade chains operating in Finland. These retail companies have stores and department stores in different geographical areas in Finland and the survey was conducted in altogether 19 cities. In addition to the theories that were discussed, two expert interviews were conducted in order to get a deeper understanding of the phenomenon at hand. Moreover the interviews helped in the formulation of the hypotheses and the questionnaire design. The questionnaires were sent directly to the stores, where they were placed so that they were available for the sales personnel. Altogether 487 usable responses were collected. The returned questionnaires were analyzed with IBM SPSS 21 statistics program. The results of this study indicated that the attitudes toward Russian customers are more negative compared to other foreign customers. However, the respondents’ attitudes toward and perceptions of Russian customers varied a lot. From the background variables age, education level, length of employment in current workplace, and length of experience in customer service had an effect on the attitudes of the respondents. In addition, the perceptions of Russian customers were more positive in the Eastern Finland compared to Helsinki metropolitan area. The cultural elements; cultural knowledge, cultural distance and cultural intelligence all affected the attitudes of the respondents. From the elements related to sales behavior and performance customer orientation, salesperson’s affect and empathy toward customers, and perceived job autonomy had an effect on the attitudes

Worldview awareness and adult education /

This research derived data from two sets of interviews with 18 participants who were involved in adult education in either a community college or a university. The purpose was to explore their worldview awareness. Through the interviews, the participants shared their understanding of worldview as a term and concept and as something that might be seen to apply in their practice of teaching. The responses indicated that there are three kinds of awareness (noetic, experiential, and integrative) which appeared to develop upon a landscape of constraints and opportunities. Constraints were seen to fall into the 5 broad categories of institutional, circumstantial, self-imposed, other-imposed, and discipline-related constraints. Opportunities for developing awareness were linked to individual experiences and could occur to different extents in many directions, on different occasions, and in different phases of life. Through this research, and in spite of the prevalence of worldview in the human experience, it was foimd that the term and concept have remained on the margins of educational discourse. Consequently, theory, research, and practice have been deprived of a useful and usable concept.

Examining sport commitment and intentions to participate in intramural sports : application of the Sport Commitment Model and the Theory of Planned Behaviour in a campus recreational sport setting

Fifty-six percent of Canadians, 20 years of age and older, are inactive (Canadian Community Health Survey, 200012001). Research has indicated that one of the most dramatic declines in population physical activity occurs between adolescence and young adulthood (Melina, 2001; Stephens, Jacobs, & White, 1985), a time when individuals this age are entering or attending college or university. Colleges and universities have generally been seen as environments where physical activity and sport can be promoted and accommodated as a result of the available resources and facilities (Archer, Probert, & Gagne, 1987; Suminski, Petosa, Utter, & Zhang, 2002). Intramural sports, one of the most common campus recreational sports options available for post-secondary students, enable students to participate in activities that are suited for different levels of ability and interest (Lewis, Jones, Lamke, & Dunn, 1998). While intramural sports can positively affect the physical activity levels and sport participation rates of post-secondary students, their true value lies in their ability to encourage sport participation after school ends and during the post-school lives of graduates (Forrester, Ross, Geary, & Hall, 2007). This study used the Sport Commitment Model (Scanlan et aI., 1993a) and the Theory of Planned Behaviour (Ajzen, 1991) with post secondary intramural volleyball participants in an effort to examine students' commitment to intramural sport and 1 intentions to participate in intramural sports. More specifically, the research objectives of this study were to: (1.) test the Sport Commitment Model with a sample of postsecondary intramural sport participants(2.) determine the utility of the sixth construct, social support, in explaining the sport commitment of post-secondary intramural sport participants; (3.) determine if there are any significant differences in the six constructs of IV the SCM and sport commitment between: gender, level of competition (competitive A vs. B), and number of different intramural sports played; (4.) determine if there are any significant differences between sport commitment levels and constructs from the Theory of Planned Behaviour (attitudes, subjective norms, perceived behavioural control, and intentions); (5.) determine the relationship between sport commitment and intention to continue participation in intramural volleyball, continue participating in intramurals and continuing participating in sport and physical activity after graduation; and (6.) determine if the level of sport commitment changes the relationship between the constructs from the Theory of Planned Behaviour. Of the 318 surveys distributed, there were 302 partiCipants who completed a usable survey from the sample of post-secondary intramural sport participants. There was a fairly even split of males and females; the average age of the students was twenty-one; 90% were undergraduate students; for approximately 25% of the students, volleyball was the only intramural sport they participated in at Brock and most were part of the volleyball competitive B division. Based on the post-secondary students responses, there are indications of intent to continue participation in sport and physical activity. The participation of the students is predominantly influenced by subjective norms, high sport commitment, and high sport enjoyment. This implies students expect, intend and want to 1 participate in intramurals in the future, they are very dedicated to playing on an intramural team and would be willing to do a lot to keep playing and students want to participate when they perceive their pursuits as enjoyable and fun, and it makes them happy. These are key areas that should be targeted and pursued by sport practitioners.