Synthesis and toxicological evaluation of a chitosan‑L‑leucine conjugate for pulmonary drug delivery applications

Herein are reported the synthesis of a conjugate of chitosan with L-leucine, the preparation of nanoparticles from both chitosan and the conjugate for use in pulmonary drug delivery, and the in vitro evaluation of toxicity and inflammatory effects of both the polymers and their nanoparticles on the bronchial epithelial cell line, BEAS-2B. The nanoparticles, successfully prepared both from chitosan and the conjugate, had a diameter in the range of 10−30 nm. The polymers and their nanoparticles were tested for their effects on cell viability by MTT assay, on trans-epithelial permeability by using sodium fluorescein as a fluid phase marker, and on IL-8 secretion by ELISA. The conjugate nanoparticles had a low overall toxicity (IC50 = 2 mg/mL following 48 h exposure; no induction of IL-8 release at 0.5 mg/mL concentration), suggesting that they may be safe for pulmonary drug delivery applications.

Colloidal drug probe : Method development and validation for adhesion force measurement using Atomic Force Microscopy

This study demonstrates a novel technique of preparing drug colloid probes to determine the adhesion force between a model drug salbutamol sulphate (SS) and the surfaces of polymer microparticles to be used as carriers for the dispersion of drug particles from dry powder inhaler (DPI) formulations. Model silica probes of approximately 4 lm size, similar to a drug particle used in DPI formulations, were coated with a saturated SS solution with the aid of capillary forces acting between the silica probe and the drug solution. The developed method of ensuring a smooth and uniform layer of SS on the silica probe was validated using X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy (SEM). Using the same technique, silica microspheres pre-attached on the AFM cantilever were coated with SS. The adhesion forces between the silica probe and drug coated silica (drug probe) and polymer surfaces (hydrophilic and hydrophobic) were determined. Our experimental results showed that the technique for preparing the drug probe was robust and can be used to determine the adhesion force between hydrophilic/ hydrophobic drug probe and carrier surfaces to gain a better understanding on drug carrier adhesion forces in DPI formulations.

Engineered microenvironments provide new insights into ovarian and prostate cancer progression and drug responses

Tissue engineering technologies, which have originally been designed to reconstitute damaged tissue structure and function, can mimic not only tissue regeneration processes but also cancer development and progression. Bioengineered approaches allow cell biologists to develop sophisticated experimentally and physiologically relevant cancer models to recapitulate the complexity of the disease seen in patients. Tissue engineering tools enable three-dimensionality based on the design of biomaterials and scaffolds that re-create the geometry, chemistry, function and signalling milieu of the native tumour microenvironment. Three-dimensional (3D) microenvironments, including cell-derived matrices, biomaterial-based cell culture models and integrated co-cultures with engineered stromal components, are powerful tools to study dynamic processes like proteolytic functions associated with cancer progression, metastasis and resistance to therapeutics. In this review, we discuss how biomimetic strategies can reproduce a humanised niche for human cancer cells, such as peritoneal or bone-like microenvironments, addressing specific aspects of ovarian and prostate cancer progression and therapy response.

Driver licensing experience of Korean Australian novice drivers

Graduated driver licensing has been shown to improve the safety of young drivers but relatively little is known about how well it works for drivers born in countries where the licensing system is less sophisticated. This research used Bronfenbrenner's ecological model to examine the driver licensing experience of Korean Australian young drivers using driver and parent focus groups and an online survey of drivers. Accumulating the required supervised driving was more difficult for international students than those living with parents and differences in road rules (particularly relating to seat belt use) between the countries exerted an important influence on behaviour.

Graduated driver licensing : an international review

Graduated driver licensing (GDL) aims to gradually increase the exposure of new drivers to more complex driving situations and typically consists of learner, provisional and open licence phases. The first phase, the learner licence, is designed to allow novice drivers to obtain practical driving experience in lower risk situations. The learner licence can delay licensure, encourage novice drivers to learn under supervision, mandate the number of hours of practice required to progress to the next phase and encourage parental involvement. The second phase, the provisional licence, establishes various driving restrictions and thereby reduces exposure to situations of higher risk, such as driving at night, with passengers or after drinking alcohol. Parental involvement with a GDL system appears essential in helping novices obtain sufficient practice and in enforcing compliance with restrictions once the new driver obtains a provisional licence. Given the significant number of young drivers involved in crashes within Oman, GDL is one countermeasure that may be beneficial in reducing crash risk and involvement for this group.

Deterrence of drug driving : the impact of the ACT drug driving legislation and detection techniques

Overarching Research Questions Are ACT motorists aware of roadside saliva based drug testing operations? What is the perceived deterrent impact of the operations? What factors are predictive of future intentions to drug drive? What are the differences between key subgroups

Tissue-engineered 3D tumor angiogenesis models : potential technologies for anti-cancer drug discovery

Angiogenesis is indispensable for solid tumor expansion, and thus it has become a major target of cancer research and anti-cancer therapies. Deciphering the arcane actions of various cell populations during tumor angiogenesis requires sophisticated research models, which could capture the dynamics and complexity of the process. There is a continuous need for improvement of existing research models, which engages interdisciplinary approaches of tissue engineering with life sciences. Tireless efforts to develop a new model to study tumor angiogenesis result in innovative solutions, which bring us one step closer to decipher the dubious nature of cancer. This review aims to overview the recent developments, current limitations and future challenges in three-dimensional tissue-engineered models for the study of tumor angiogenesis and for the purpose of elucidating novel targets aimed at anti-cancer drug discovery.

Delivering crushed tablets using thickened fluids : is drug diffusion into gastric fluids restricted?

Solid medications are often crushed and mixed with food or thickened water to aid drug delivery for those who cannot or prefer not to swallow whole tablets or capsules. Dysphagic patients have the added problem of being unable to safely swallow thin fluids so water thickened with polysaccharides is used to deliver crushed medications and ensure safe swallowing. It is postulated that these polysaccharide systems may restrict drug release by reducing the diffusion of the drug into gastric fluids. METHODS By using a vertical diffusion cell separated with a synthetic membrane, the diffusion of a model drug (atenolol) was studied from a donor system containing the drug dispersed into thickened water with xanthan gum (concentration range from 0.005%-2.2%) into a receptor system containing simulated gastric fluid (SGF) at 37°C. The amount of drug transferred was measured over 8 hours and diffusion coefficients estimated using the Higuchi model approach. RESULTS Atenolol diffusion decreased with increasing xanthan gum concentration up to 1.0%, above which diffusion remained around 300 μ2s-1. The rheological measurements captured the influence of the structure and conformation of the polysaccharide in water on the movement and availability of the drug in SGF. DISCUSSION Dose form administration for dysphagic patients’ needs special attention from general practitioners, pharmacist and patients. Improving drug release of crushed tablets from thickening agents requires a reduction in the diffusion pathway (e.g. by decreasing drop size radius). This approach could make the drug available in SGF in a short time without compromising the mechanical aspects of thickening agents that guarantee safe swallowing.

Sortase A : an ideal target for anti-virulence drug development

Sortase A is a membrane enzyme responsible for the anchoring of surface-exposed proteins to the cell wall envelope of Gram-positive bacteria. As a well-studied member of the sortase subfamily catalysing the cell wall anchoring of important virulence factors to the surface of staphylococci, enterococci and streptococci, sortase A plays a critical role in Gram-positive bacterial pathogenesis. It is thus considered a promising target for the development of new anti-infective drugs that aim to interfere with important Gram-positive virulence mechanisms, such as adhesion to host tissues, evasion of host defences, and biofilm formation. The additional properties of sortase A as an enzyme that is not required for Gram-positive bacterial growth or viability and is conveniently located on the cell membrane making it more accessible to inhibitor targeting, constitute additional reasons reinforcing the view that sortase A is an ideal target for anti-virulence drug development. Many inhibitors of sortase A have been identified to date using high-throughput or in silico screening of compound libraries (synthetic or natural), and while many have proved useful tools for probing the action model of the enzyme, several are also promising candidates for the development into potent inhibitors. This review is focused on the most promising sortase A inhibitor compounds that are currently in development as leads towards a new class of anti-infective drugs that are urgently needed to help combat the alarming increase in antimicrobial resistance.

Antidepressant direct-to-consumer prescription drug advertising and public stigma of depression : the mediating role of perceived prevalence of depression

This study examines whether memory of antidepressant direct-to-consumer (DTC) prescription drug advertising is associated with the public stigma attached to depression. Results indicate that those who better remember antidepressant DTC ads tend to have a higher perceived prevalence of depression (i.e., more people suffer from depression). And, the perceived prevalence of depression is inversely associated with the public stigma toward depression. That is, those who have a higher perceived prevalence of depression report that they are more supportive of and comfortable with people who have depression. The results suggest that the perceived prevalence of depression is a mediating variable that accounts for the relationship between memory of antidepressant DTC ads and the public stigma toward depression. The implications and limitations of the study, as an exploratory investigation, are discussed.

Using DNA as a drug - bioprocessing and delivery strategies

DNA may take a leading role in a future generation of blockbuster therapeutics. DNA has inherent advantages over other biomolecules such as protein, RNA and virus-like particles including safety, production simplicity and higher stability at ambient temperatures. Vaccination is the principal measure for preventing influenza and reducing the impact of pandemics; however, vaccines take up to 8-9 months to produce, and the global production capacity is woefully low. With production times as short as 2 weeks, improved safety and stability, bioprocess engineering developments, and the ability to perform numerous therapeutic roles, DNA has the potential to meet the demands of emerging and existing diseases. DNA is experiencing sharp growths in demand as indicated by its use in gene therapy trials and DNA vaccine related patents. Of particular interest for therapeutic use is plasmid DNA (pDNA), a form of non-genomic DNA that makes use of cellular machinery to express proteins or antigens. The production stages of fermentation and downstream purification are considered in this article. Forward looking approaches to purifying and delivering DNA are reported, including affinity chromatography and nasal inhalation. The place that pDNA may take in the preparation for and protection against pandemics is considered. If DNA therapeutics and vaccines prove to be effective, the ultimate scale of production will be huge which shall require associated bioprocess engineering research and development for purification of this large, unique biomolecule.

Using DNA as a drug : challenges and opportunities for process engineers

The maturing of the biotechnology industry and a focus on productivity has seen a shift from discovery science to small-scale bench-top research to higher productivity, large scale production. Health companies are aggressively expanding their biopharmaceutical interests, an expansion which is facilitated by biochemical and bioprocess engineering. An area of continuous growth is vaccines. Vaccination will be a key intervention in the case of an influenza pandemic. The global manufacturing capacity for fast turn around vaccines is currently woefully inadequate at around 300 million shots. As the prevention of epidemics requires > 80 % vaccination, in theory the world should currently be aiming for the ability to produce around 5.3 billion vaccines. Presented is a production method for the creation of a fast turn around DNA vaccine. A DNA vaccine could have a production time scale of as little as two weeks. This process has been harnessed into a pilot scale production system for the creation of a pre-clinical grade malaria vaccine in a collaborative project with the Coppel Lab, Department of Microbiology, Monash University. In particular, improvements to the fermentation, chromatography and delivery stages will be discussed. Consideration will then be given as to how the fermentation stage affects the mid and downstream processing stages.

Injecting Creative Commons Licensing into university policy and publishing

Australian universities are publishing previously unpublished works such as theses in institutional repositories or by publishing scholarly journals on their own presses. This re-invented role of publisher is due in part, to the availability of digital age technologies which scaffold the publishing process and facilitate inexpensive production of digital-only journals. The global push for Open Access to the outputs of publicly-funded research has also been a major driver. Research funder mandates and institutional Open Access policies apply only to publications for which the authors have no expectation of commercial gain. In all cases the primary motivation is to disseminate widely for maximum uptake with attribution to the author thereby increasing impact. This makes works published in institutional repositories and on university presses ideal candidates for Creative Commons licences.

Employee perceptions of alcohol and drug policy effectiveness: Policy features, concerns about drug testing, and the key role of preventative measures

As negative employee attitudes towards alcohol and other drug (AOD) policies may have serious consequences for organizations, the present study examined demographic and attitudinal dimensions leading to employees’ perceptions of AOD policy effectiveness. Survey responses were obtained from 147 employees in an Australian agricultural organization. Three dimensions of attitudes towards AOD policies were examined: knowledge of policy features, attitudes towards testing, and preventative measures such as job design and organizational involvement in community health. Demographic differences were identified, with males and blue-collar employees reporting significantly more negative attitudes towards the AOD policy. Attitude dimensions were stronger predictors of perceptions of policy effectiveness than demographics, and the strongest predictor was preventative measures. This suggests that organizations should do more than design adequate and fair AOD policies, and take a more holistic approach to AOD impairment by engaging in workplace design to reduce AOD use and promote a consistent health message to employees and the community.