Efeito da velocidade de aquecimento nas propriedades de produtos da cerâmica estrutural

Heating rate is one of the main variables that determine a fire cycle. In industrial processes that use high temperatures, greater fire great can reduce the cost of production and increase productivity. The use of faster and more efficient fire cycles has been little investigated by the structural ceramic industry in Brazil. However, one of the possibilities that aims at modernizing the sector is the use of roller kilns and the inclusion of natural gas as fuel. Thus, the purpose of this study is to investigate the effect of heating rate on the technological properties of structural ceramic products. Clay raw materials from the main ceramic industries in the state of Rio Grande do Norte were characterized. Some of the raw materials characterized were formulated to obtain the best physical and mechanical properties. Next, raw materials and formulations were selected to study the influence of heating rate on the final properties of the ceramic materials. The samples were shaped by pressing and extrusion and submitted to rates of 1 °C/min, 10 °C/min and 20 °C/min, with final temperatures of 850 °C, 950 °C and 1050 °C. Discontinuous cycles with rates of 10 °C/min or 15 °C/min up to 600 °C and a rate of 20 °C/min up to final temperature were also investigated. Technological properties were determined for all the samples and microstructural analysis was carried out under a number of fire conditions. Results indicate that faster and more efficient fire cycles than those currently in practice could be used, limiting only some clay doughs to certain fire conditions. The best results were obtained for the samples submitted to slow cycles up to 600 °C and fast fire sinterization up to 950 °C. This paper presents for the first time the use of a fast fire rate for raw materials and clay formulations and seeks to determine ideal dough and processing conditions for using shorter fire times, thus enabling the use of roller kilns and natural gas in structural ceramic industries

Influência na qualidade final de metais retificados através da variação da velocidade de mergulho

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Indústria cultural e forró eletrônico no Rio Grande do Norte

The present study aimed to understand how and to what extent the electronic forró, currently hegemonic in the music market in the state of Rio Grande do Norte, establishes and maintains relations of domination in the social contexts in which it is produced, transmitted and received. Based, in significant form-content, on the writings of the first generation of theorists of the so-called Frankfurt School (Critical Theory), particularly with Theodor W. Adorno, and systematically using the contributions of the Cultural Studies (from the Centre for Contemporary Cultural Studies of Birmingham) and of the sociology of Pierre Bourdieu, this study aimed to perform, in the fertile intersection of these references, a critical possibility of interpretation of the electronic forró predominantly spread in the state of Rio Grande do Norte. To this end, aiming at a better apprehension of the so-called capital circuits/culture circuits , this study resulted from a qualitative investment of research, based on structured interviews with musicians, entrepreneurs of the sector and music consumers, as well as on the analysis of the themes contained in the official discography of the electronic forró band called Garota Safada (Shameless Girl). As a general empirical conclusion, it was possible to infer that far from the significant presence of domination or mere prevalence of oppositions, there is a relational pluralism of forms of domination and ways of resistances present in the production and consumption of electronic forró, regardless of gender, age, income, education or place of residence. However, the artifices of the cultural industry has been shown to be efficient: from large-scale businessmen to small producers enabled by the so-called open markets . The currentness of the concept of cultural industry is based on the idea that its products are offered systematically (the systematic insistence of everything to everyone) and on the notion that its production primarily meets the administrative criteria of control over the effects on the receiver (capacity of prescription of desires). Thus, the Adornian reflection on the pseudo-individualization leads to the inference that even in some of the most apparent ways of negotiation and/or refusal regarding the consumption of forró, certain behaviors of the cultural industry still prevail both in the very (re)interpretation of the forró and in the choice of other music genres also standardized, rationalized and massified. Therefore, despite the absence of cause-effect relation and the recognition of the popular capacity of re-elaboration and contestation of the media consumption, some world views prevailing in relation to the electronic forró establish or, at least, support some hegemonic ideologies, especially those concerning the life style, consumption and genre relations (fun by all means). Therefore, due the massification of certain songs, some ways of dissemination of values, beliefs and feelings are potentially experienced from the electronic forró. So, it is presumable that in the current advance of the process of semiformation (Halbbildung), the habitus of a part of the youth from the state of Rio Grande do Norte reinforces and is reinforced by the centrality of the trinomial fun, love and sex present in the songs, emphasized in some constructive practices of sense and in certain flows of social significance

Devido processo penal: uma análise acerca dos direitos fundamentais sob a perspectiva do processo eletrônico

The current study presents an analysis about the automation of the lawsuits in Brazil, which opens a new direction to be followed by the National Secretary of Justice, applied indistinctively to the civil, criminal and labor lawsuits, as well as to the special court houses at any degree of juridisdiction. It treats, specifically, about the transition from the classic lawsuit with bureaucratic aspects to the electronic one, based on the simplicity of the functions, the quality of the oral and the readiness. The light of the constitutional principle of the reasonable duration of the lawsuit, while fundamental rigth of the defendant and, under de protection of the democratic guarantee, it investigates, from the theory of the fundamental rights to the reform movement of the lawsiut, in the scenery of the alien law and national law, the latter, mostly because it has the automation as a necessary improvement claimed by modernity, yet without forgetting of the humane character inherent to the criminal lawsuit. It faces the issue of of the disruption of the paradigm of the written formality of the Brazilian lawsuit, the problem of the resistance to the new automized method, the use of the video conference for the inquest of the witnesses as well as for the questioning of the defendant, the advancements of the virtual lawsuit on the Superior Courts, Federal Supreme Court and Superior Court of Justice, it treats also about the role of the National Council of Justice - CNJ - to uniformize the legal proceedings in the country. Without neglecting the effective respect to the fundamental rights, it focuses the cultural change necessary so that the electronic technology can be, in fact, in the indictment system, the means to reach with excellency the citizenship by the simplification of the legal proceedings, transposing the baseless bureaucracy and assuring an effective judicial service assistance in order to have a better quality of life

Análise do processo judicial eletrônico (PJe) sob os parâmetros da discursividade processual e do acesso democrático à justiça

The conceptions of the judicial function, the process and the factors of legitimacy of the norm of decision are changed according to the model of State (liberal, social democratic and constitutional). The right of access to justice, likewise, follows the ideals present in constitutional movements experienced in different historical moments. The deficit of legitimacy of the judiciary is recurring subject of study in the doctrine, especially in the face of democratic standards that permeate the current paradigm of state. Under the process law, the essential element for the distinction of the states based on the rule of law (formal and material) and the democratic constitutional state lies in the democratic guarantee of participation to the litigants in the process of elaborating the norm of decision. The concern about the participatory democracy and the concretion of fundamental rights has as presupposition the conception of popular sovereignty. Keeping this effort in mind, the civil procedure cannot be oblivious to such considerations, especially when it justifies its constitutional conformation from the institutionalization of discourse within the procedural field (democratic principle) and of the democratization of access to justice, leading to the necessary contestation of the theory of instrumentality of the process. The democratic prospects of civil procedure and the concern about the legitimacy of the rule of decision cannot be moved away from the analysis of the judicial function and the elements that influence the legal suit s progress. The computerization of the judicial process entails extensive modification in the way the judicial function is developed, in view of automation of activities held, of the eliminating of bureaucratic tasks, manual and repetitive, and of streamlining the procedure. The objective of this study is to analyze the dogmatic changes and resulting practices from the implementation of the Judicial Electronic Process (JEP), prepared by the National Council of Justice, under the parameters of procedural discourse and democratic access to justice. Two hypotheses are raised, which, based on a bibliographic-documentary, applied and exploratory research, are contested dialectically. The expansion of publicity of procedural acts and the facilitating of communication and practice of such acts are elements that contribute to the effective participation of the recipients of the norm of decision in its making process and, therefore, the democratic principle in the procedural field. Ensuring access (to the parts) to the case files and reasonable duration of the process along with the preservation of its founding principles (contradictory, legal defense and isonomy) are essential to ensure democratic access to justice within the virtual system

Produtividade de híbridos de milho em função da velocidade de semeadura

O presente trabalho foi conduzido na área experimental do Laboratório de Máquinas e Mecanização Agrícola da UNESP - Jaboticabal, em um Latossolo Vermelho eutroférrico, em preparo convencional. Avaliaram-se o desenvolvimento e os componentes de produção de dois híbridos de milho (DKB 390, simples e DKB 435, duplo) em função de três velocidades do conjunto trator-semeadora-adubadora (5,4; 6,8 e 9,8 km h-1), totalizando seis tratamentos, com quatro repetições, em delineamento em blocos ao acaso, em esquema fatorial 2 x 3. Os resultados evidenciaram que o aumento da velocidade do conjunto trator-semeadora-adubadora reduziu a produtividade de grãos para o híbrido simples e não interferiu na produtividade do híbrido duplo. Apenas na menor velocidade (5,4 km h-1), o híbrido simples apresentou maior produtividade de grãos, comparado com o híbrido duplo. O aumento da velocidade na operação de semeadura reduziu a percentagem de espaçamentos normais entre as sementes, independentemente do híbrido estudado.

Semeadora-adubadora: exigências em função do preparo do solo, da pressão de inflação do pneu e da velocidade

As semeadoras-adubadoras, responsáveis pela correta adição de semente e adubo ao solo, possuem mecanismos dosadores acionados por suas rodas motrizes, que giram em função do contato com a superfície do solo. Esse contato é influenciado, entre outros fatores, pela pressão de inflação dos pneus. O objetivo do presente trabalho foi estudar o desempenho de uma semeadora-adubadora de precisão em função do preparo do solo (preparo convencional e plantio direto), das velocidades de deslocamento e da pressão de inflação do seu pneu. O trabalho foi realizado na UNESP de Jaboticabal (SP) no ano de 2006. Foram avaliadas as seguintes variáveis: força de tração e potência na barra, consumo de combustível (horário, ponderal, operacional e específico), capacidade de campo operacional, patinagem dos rodados do trator e da semeadora-adubadora, estande inicial e distribuição longitudinal de sementes. O sistema plantio direto demandou maior força (35 %), potência e consumo horário de combustível; o mesmo aconteceu na maior velocidade. A pressão de inflação das rodas da semeadora proporcionou menor patinagem e maior estande inicial de plântulas.

Demanda energética e eficiência da distribuição de sementes de milho sob variação de velocidade e condição de solo

O trabalho teve o objetivo de avaliar a demanda energética e a eficiência da distribuição de sementes de uma semeadora-adubadora para semeadura direta, submetida à variação de velocidade e condições de solo, na semeadura da cultura do milho. O estudo foi desenvolvido em um Nitossolo Vermelho distrófico, na Fazenda Experimental Lageado, no município de Botucatu - SP. O delineamento experimental foi em blocos casualizados, com oito repetições, combinando-se três velocidades de deslocamento (4,4; 6,1 e 8,1 km h-1) e duas condições de solo (solo manejado sob sistema de plantio direto há cinco anos e solo preparado com escarificador há 18 meses). Avaliaram-se a força de tração, a potência na barra de tração, o consumo de combustível, a capacidade de campo efetiva, a distribuição longitudinal de plantas, o coeficiente de variação, o índice de precisão e o número de plantas por hectare (estande inicial). Os resultados revelaram que, aumentando-se a velocidade de 4,4 para 8,1 km h-1, consegue-se aumentar em 86% a capacidade operacional, com incremento de 96% na demanda de potência na barra de tração e redução de 26% no consumo operacional de combustível. A maior velocidade (8,1 km h-1) proporcionou menor porcentual de espaçamentos normais e aumento no porcentual de espaçamentos múltiplos e falhos, maior coeficiente de variação e pior índice de precisão. A variação da velocidade não interferiu no número de plantas por hectare.

Desempenho de uma semeadora-adubadora direta, em função da velocidade de eslocamento e do tipo de manejo da biomassa da cultura de cobertura do solo

O objetivo do presente trabalho foi estudar o desempenho de uma semeadora-adubadora, operando em duas velocidades sobre a palhada da cultura do milheto (Pennisetum glaucum (L.) R. Brown), após diferentes manejos, na semeadura direta da cultura da soja (Glycine Max L.). O experimento foi realizado com seis tratamentos, em esquema fatorial, delineados em blocos ao acaso, com quatro repetições. Os tratamentos combinaram três manejos (triturador de palhas tratorizado, rolo- faca e herbicida) com duas velocidades de deslocamento da semeadora-adubadora (5,2 e 7,3 km h-1). Foram analisadas as seguintes variáveis: acúmulo e decomposição de massa seca do milheto, índice de emergência da cultura da soja, uniformidade de distribuição longitudinal de sementes, capacidade de campo efetiva da semeadora-adubadora e produtividade da soja. Os resultados mostraram que não houve diferença na decomposição da massa de milheto após os manejos e que esses, juntamente com a velocidade de deslocamento do conjunto trator-semeadora-adubadora, não influenciaram no número de dias para a emergência das plântulas de soja e na distribuição longitudinal das sementes. A capacidade de campo efetiva da semeadora-adubadora foi maior na velocidade mais alta. O rendimento de grãos não diferiu significativamente nos tratamentos estudados.

Segurança da informação no correio eletrônico com base na ISO/IEC 17799 :um estudo de caso em uma instituição superior com foco no treinamento

The electronic mail service is one of the most Internet services that grow in the corporate environment. This evolution is bringing several problems for the organizations, especially to information that circulates inside of the corporate net. The lack of correct orientation to the people, about the usage and the security importance of these resources, is leaving breaches and causing misusage and overuse of service, for example. In recent literature, it starts to coming out several ideas, which has helped to rganizations how to plain and how to implement the information security system to the electronic mail in computer environment. However, these ideas are still not placed in practice in many companies, public or private. This dissertation tries to demonstrate the results of a research that has like goal, identify the importance that user training has over the information security policy, through a case study inside of private superior education institute in this state. Besides, this work had by basic orientation the ISO/IEC 17799, which talk about People Security. This study was developed over a proposed model to this research, which looked for offer conditions to guide the institution studied, how to plan better a information security policy to the electronic mail. Also, this research has an exploratory and descreptive nature and your type, qualitative. Firstly, it was applied na questionary to the information technology manager, as better way to get some general data and to deepen the contact which still then, it was being kept through e-mail. Thereupon this first contact, eleven interviews were done with the same manager, beside one interview with twenty-four users, among employees e students. After that to collect and transcript the interviews, were review with the manager all informations given, to correct any mistakes and to update that informations, to then, start the data analyze. The research suggests that the institution has a pro attitude about the information security policy and the electronic mail usage. However, it was clear that answers have their perception about information security under a very inexperient way, derived of a planning lack in relation to training program capable to solve the problem

Uma aplicação de análise de decisão com o método AHP Processo de hierarquia analítica: um estudo sobre adoção de Sistema eletrônico de cobrança no Transporte público urbano

This thesis carries through an application of Analysis of Multicriterion Decision with use of the method of Analytical Hierarchy Process (AHP) in the problematic one of taking of decision of the adoption of electronic collecting in the system of urban transport in the country, a subject that has been controversial. A modeling of criteria and alternatives is carried through and applied a questionnaire based on method AHP the excellent actors in the system of urban transport - Leading of the Managing Agency Public Municipal theatre of Urban Transports, Controller of Company of Bus, Controller of Labor union, Controller of Union of Companies, Communitarian Leader. The considered alternatives were: the maintenance of the current state with collectors, the implementation of electronic collection without collectors, and the implementation of electronic collection with collectors. The used criteria were: job, impact in the fare, control of the system, easiness of use, information. The study was carried through in the city of Natal, RN, where if the adoption of electronic collection argues and where this implementation in some bus lines between Natal and Parnamirim exists, city that integrates the region of the great Natal. The main results of the method evidence in a dimension, the viability of use of method AHP with questionnaire by means of validation of the judgments with analysis of variance beyond proper the normal mechanisms of analysis of consistency to the method, and in another one, the contribution of the analysis boarding multicriterion to become the judgments more clearly. The main results of the analysis help to show that although to models of criteria and distinct judgments of the actors, the method evidenced that it has inclination the adoption of the electronic collection on the current situation, even so with divergences between the maintenance or not of the collector. The research points to the possibility of accomplishment of the application of the AHP in successive rounds of judgments

Controle vetorial de velocidade de uma máquina de indução sem mancais trifásica com bobinado dividido utilizando estimação neural de fluxo

This work describes the study and the implementation of the vector speed control for a three-phase Bearingless induction machine with divided winding of 4 poles and 1,1 kW using the neural rotor flux estimation. The vector speed control operates together with the radial positioning controllers and with the winding currents controllers of the stator phases. For the radial positioning, the forces controlled by the internal machine magnetic fields are used. For the radial forces optimization , a special rotor winding with independent circuits which allows a low rotational torque influence was used. The neural flux estimation applied to the vector speed controls has the objective of compensating the parameter dependences of the conventional estimators in relation to the parameter machine s variations due to the temperature increases or due to the rotor magnetic saturation. The implemented control system allows a direct comparison between the respective responses of the speed and radial positioning controllers to the machine oriented by the neural rotor flux estimator in relation to the conventional flux estimator. All the system control is executed by a program developed in the ANSI C language. The DSP resources used by the system are: the Analog/Digital channels converters, the PWM outputs and the parallel and RS-232 serial interfaces, which are responsible, respectively, by the DSP programming and the data capture through the supervisory system

Estudo de estratégias de otimização para poços de petróleo com elevação por bombeio de cavidades progressivas

The progressing cavity pump artificial lift system, PCP, is a main lift system used in oil production industry. As this artificial lift application grows the knowledge of it s dynamics behavior, the application of automatic control and the developing of equipment selection design specialist systems are more useful. This work presents tools for dynamic analysis, control technics and a specialist system for selecting lift equipments for this artificial lift technology. The PCP artificial lift system consists of a progressing cavity pump installed downhole in the production tubing edge. The pump consists of two parts, a stator and a rotor, and is set in motion by the rotation of the rotor transmitted through a rod string installed in the tubing. The surface equipment generates and transmits the rotation to the rod string. First, is presented the developing of a complete mathematical dynamic model of PCP system. This model is simplified for use in several conditions, including steady state for sizing PCP equipments, like pump, rod string and drive head. This model is used to implement a computer simulator able to help in system analysis and to operates as a well with a controller and allows testing and developing of control algorithms. The next developing applies control technics to PCP system to optimize pumping velocity to achieve productivity and durability of downhole components. The mathematical model is linearized to apply conventional control technics including observability and controllability of the system and develop design rules for PI controller. Stability conditions are stated for operation point of the system. A fuzzy rule-based control system are developed from a PI controller using a inference machine based on Mandami operators. The fuzzy logic is applied to develop a specialist system that selects PCP equipments too. The developed technics to simulate and the linearized model was used in an actual well where a control system is installed. This control system consists of a pump intake pressure sensor, an industrial controller and a variable speed drive. The PI control was applied and fuzzy controller was applied to optimize simulated and actual well operation and the results was compared. The simulated and actual open loop response was compared to validate simulation. A case study was accomplished to validate equipment selection specialist system

Controle vetorial de velocidade de um motor de indução trifásico com estimação neural de fluxo

This work describes the study and the implementation of the speed control for a three-phase induction motor of 1,1 kW and 4 poles using the neural rotor flux estimation. The vector speed control operates together with the winding currents controller of the stator phasis. The neural flux estimation applied to the vector speed controls has the objective of compensating the parameter dependences of the conventional estimators in relation to the parameter machine s variations due to the temperature increases or due to the rotor magnetic saturation. The implemented control system allows a direct comparison between the respective responses of the speed controls to the machine oriented by the neural rotor flux estimator in relation to the conventional flux estimator. All the system control is executed by a program developed in the ANSI C language. The main DSP recources used by the system are, respectively, the Analog/Digital channels converters, the PWM outputs and the parallel and RS-232 serial interfaces, which are responsible, respectively, by the DSP programming and the data capture through the supervisory system

Otimização do controle eletrônico do diagrama de radiação de arranjos de antenas usando algoritmos genéticos com codificação real

Antenna arrays are able to provide high and controlled directivity, which are suitable for radiobase stations, radar systems, and point-to-point or satellite links. The optimization of an array design is usually a hard task because of the non-linear characteristic of multiobjective, requiring the application of numerical techniques, such as genetic algorithms. Therefore, in order to optimize the electronic control of the antenna array radiation pattem through genetic algorithms in real codification, it was developed a numerical tool which is able to positioning the array major lobe, reducing the side lobe levels, canceling interference signals in specific directions of arrival, and improving the antenna radiation performance. This was accomplished by using antenna theory concepts and optimization methods, mainly genetic algorithms ones, allowing to develop a numerical tool with creative genes codification and crossover rules, which is one of the most important contribution of this work. The efficiency of the developed genetic algorithm tool is tested and validated in several antenna and propagation applications. 11 was observed that the numerical results attend the specific requirements, showing the developed tool ability and capacity to handle the considered problems, as well as a great perspective for application in future works.