Adaptação do programa PAC-Pórticos ao EC2 e sua integração com o conceito BIM

Atualmente existe uma grande variedade de programas de cálculo automático de estruturas de betão armado disponíveis no mercado, pois estes, cada vez mais, são inerentes ao desenvolvimento de cada projeto de estruturas. O PAC-Pórticos foi um dos primeiros a chegar ao mercado nacional surgindo no início da década de noventa. Foi totalmente desenvolvido em Portugal, tendo tido bastante sucesso nas suas vendas a nível nacional. O PAC-Pórticos não está preparado para operar diretamente nos mais recentes sistemas operativos nem foi programado para dimensionar os diversos elementos de betão armado seguindo os termos das normas mais recentes (Eurocódigos). O tema do presente trabalho vai de encontro aos atuais problemas do programa, assim sendo, definiu-se como primeiro objetivo a adaptação do PAC-Pórticos à regulamentação europeia para o betão armado. Numa 1ª fase, para a adaptação do PAC-Pórticos aos novos códigos, foi necessário estudar o programa em si, perceber o seu funcionamento e posteriormente realizar uma comparação entre a legislação para qual o software está programado, o Regulamento de Estruturas de Betão Armado e Pré-Esforçado (ainda em vigor) e a Norma Europeia correspondente a EN 1992-1-1 (Eurocódigo 2). Seguidamente, procedeu-se ao estudo e adaptação de todas as sub-rotinas de cálculo do PAC-Pórticos para o dimensionamento de vigas e pilares, tendo finalmente sido testado o novo código e comprovados os resultados obtidos com o mesmo. Na realização do presente trabalho, não foi ignorada a importância crescente da metodologia BIM que, nos dias de hoje, tende a ser implementada nos programas de cálculo de engenharia civil. Neste âmbito, o segundo objetivo é o de conseguir visualizar uma solução obtida do PAC-Pórticos numa qualquer ferramenta tridimensional BIM. Para tal, foram ponderadas várias hipóteses, mas optou-se por criar dois plug-in para o programa AutoCAD da Autodesk. O primeiro destes plug-in contempla o desenho das vigas e o segundo para os pilares, ambos em 3D e elaborados de forma automática.

Why and How Was Regionalization of Perinatal Care Accomplished in Portugal?

Portuguese health care system was created in 1979. It is universal and for free. Expenses are supported by the State through taxes. The modern perinatal care system started by the end of 1970. The first neonatal intensive care units were created in 1980, the Portuguese Neonatal Society in 1985 and the National Neonatal Transport System in 1987. Until the seventies of twentieth century and even during eighties there were more than 200 hospitals with deliveries, a great part without obstetrician or paediatrician, a great percentage of pregnancies had no prenatal care, there were few neonatal intensive care units and perinatal mortality rate was one of the highest in the European countries. In 1987 an Experts Committee was nominated by the Health Ministry aiming to collect and analyse data on perinatal care and to suggest improvements. The Report resulting from this work is the main document on which is based the reform. The reform was a 9 years program in 3 years stages aiming to close hospitals with less than 1500 deliveries/year, to reclassify hospitals, to create Coordinating Units between health centres and hospitals, to equip neonatal intensive and intermediate care units, to define needs of obstetricians, paediatricians and nurses for each centre and to promote specialised training in neonatology for paediatricians and nurses. Levels of perinatal care were defined as well as localization of each level of hospital according to the number of deliveries in one geographic area, geographic difficulties and existing routes and connections. Steps for opening and closure of different levels of hospitals were very well programmed. The organization, capacities, number of obstetricians, neonatologists and nurses as well as equipment for each level of care was defined. Rules for pregnant women and newborns transfer from level II to level III hospitals were also well described. A specific training is neonatology was created starting in 1990. This organization resulted in an impressive decrease in mortality rates at all levels and still it is the policy we have today.

Reconfiguração e desenvolvimento do sistema de controlo de um AGV

O veículo guiado automaticamente (AGV) adquirido pelo Departamento de Engenharia Mecânica (DEM) tem vindo a ficar obsoleto devido ao hardware, que nos dias de hoje começa a dar sinais de falhas bem como falta de peças de substituição, e ao software, sendo o PLC (Programmable Logic Controller) usado muito limitado quanto às suas funções de controlo, ficando as principais tarefas de controlo do AGV a cargo de placas eletrónicas de controlo. Para promover o controlo autónomo do AGV, foi decidido retirar toda a parte de hardware que detinha o controlo do mesmo e passou a ser um novo PLC, com maior capacidade de processamento, a executar todo o tipo de controlo necessário ao funcionamento do mesmo. O hardware considerado apenas incluí, de forma resumida, os motores responsáveis pelo movimento e direção, placa de controlo de potência dos motores, placa de interface entre as saídas digitais do PLC e as entradas da placa de controlo de potência dos motores e os demais sensores necessários à deteção de obstáculos, fins de curso da direção, sensores dos postos de trabalho e avisadores de emergência. Todo o controlo de movimento e direção bem como a seleção das ações a executar passou a ficar a cargo do software programado no PLC assim como a interação entre o sistema de supervisão instalado num posto de controlo e o PLC através de comunicação via rádio. O uso do PLC permitiu a flexibilidade de mudar facilmente a forma como as saídas digitais são usadas, ao contrário de um circuito eletrónico que necessita de uma completa remodelação, tempo de testes e implementação para efetuar a mesma função. O uso de um microcontrolador seria igualmente viável para a aplicação em causa, no entanto o uso do PLC tem a vantagem de ser robusto, mais rápido na velocidade de processamento, existência de software de interface de programação bastante intuitivo e de livre acesso, facilidade de alterar a programação localmente ou remotamente, via rádio, acesso a vários protocolos de comunicação robustos como Modbus, Canbus, Profinet, Modnet, etc., e acesso integrado de uma consola gráfica totalmente programável. iv É ainda possível a sua expansão com adição de módulos de entradas e saídas digitais e/ou analógicas permitindo expandir largamente o uso do AGV para outros fins. A solução está a ser amplamente testada e validada no Laboratório de Automação (LabA) do Departamento de Engenharia Mecânica do ISEP (Instituto Superior de Engenharia do Porto), permitindo a otimização dos sistemas de controlo de direção bem como a interatividade entre o PLC e o programa de interface/supervisão do posto de trabalho.

Diagnosis of Eosinophilic Esophagitis in an Infant Undergoing Milk Oral Immunotherapy - A Case Report

Although the standard of care for cow’s milk (CM) allergy is strict food avoidance, oral immunotherapy (OIT) is being widely investigated as an alternative management option in certain cases. Immediate adverse reactions to OIT have been described, but its long-term effects are much less often reported. We present the case of a girl diagnosed with IgE-mediated CM allergy that was proposed for our CM OIT protocol at the age of 3 years. The first sessions (dose escalation up to 5 ml) were well tolerated, however eight hours after her daily morning dose of 5ml CM the child developed late episodes of vomiting. No other symptoms, particularly immediately after CM ingestion, were reported. These episodes became progressively worse and on the third day she presented mild dehydration and blood eosinophilia. After OIT interruption, a progressive clinical improvement was observed. An esophageal endoscopy was performed, showing signs of eosinophilic esophagitis (EoE) with peak 20 eosinophils/hpf. After treatment with topical swallowed fluticasone (500 mcg bid) and a CM-free diet for 4 months, the child was asymptomatic and endoscopy and biopsy findings were normal. The long-term effects of milk OIT are still in part unknown. We hypothesize that eosinophilic esophagitis may have been a consequence of OIT in this case. The findings seem to indicate that food allergy may play a role in the pathogenesis of esophageal eosinophilia and stress the importance of a well programmed long-term follow-up of patients that have undergone milk OIT.

Controlo de qualidade interno: elaboração de um programa de Controlo de Qualidade Interno segundo as boas práticas da Qualidade

RESUMO: Esta dissertação pretende apresentar uma proposta para um programa de Controlo de Qualidade interno das hormonas tiroideias, segundo as boas práticas da qualidade. Para que se comprove o rigor e fiabilidade dos seus resultados analíticos, condição indispensável para que estes possam servir de base às mais diversas tomadas de decisão, toda a filosofia que envolve a qualidade assume um papel preponderante. Neste contexto a elaboração de um programa de controlo de qualidade adequado é muito importante e imprescindível. A realização do controlo de qualidade permite monitorizar o desempenho de todos os materiais, equipamentos, instrumentos e métodos analíticos bem como criar sinais de alerta para prevenir a emissão de resultados não-conformes e indicar a necessidade de ações corretivas. Permite também indicar a necessidade de melhorias em processos e em atividades ligadas aos operadores e consciencializar o pessoal de que o controlo da qualidade é um dever para com o cliente e tem a função de gerar confiança nos resultados obtidos. O controlo de qualidade interno abrange todos os procedimentos assumidos por um laboratório para avaliação contínua do seu trabalho. A sua finalidade é assegurar a consistência dos resultados diários e a sua conformidade com critérios definidos, avaliando a precisão dos ensaios e dando indicação do momento para se promoverem ações corretivas quando surge uma não conformidade. Segundo as melhores práticas da qualidade, serão calculados os valores do controlo de qualidade interno para as hormonas tiroideias, os seus limites e critérios (regras) de aceitabilidade, com base na relação entre o desempenho analítico e o Erro Máximo Admissível. Pretende-se assim, otimizar o desempenho do Controlo de Qualidade Interno, aperfeiçoando a capacidade de identificação do erro.-------- ABSTRACT: This paper intends to submit a proposal for a thyroid hormones internal quality Control program, according to the best quality practices. The whole philosophy involving quality plays a central role in order to prove the accuracy and reliability of the analytical results, a basic prerequisite for decision making. In this context the elaboration of an appropriate quality control program is essential and very important. Quality control allows the motorization of the performance of all materials, equipment, instruments and analytical methods, as well as the creation of warning signals indicating the need for corrective actions, to prevent the release of non-compliant results. It also indicates the need for improvements in the processes and operating activities as well as making the staff aware that quality control is a duty to the client and promotes confidence in the results. The internal quality control covers all procedures undertaken by a laboratory for a continuous evaluation of its performance. Its purpose is to ensure the consistency of the daily results and compliance with defined criteria, assessing the accuracy of the tests and indicating the moment to promote corrective actions when nonconformity appears. According to the best quality practices, the values of the internal quality control for the thyroid hormones, their limits and criteria (rules) of acceptability will be calculated, based on the relationship between analytical performance and the maximum allowable error. Thus, the aim is to optimize the performance of the Internal Quality Control, improving the ability for error detection and identification.

O impacto do perfil do utente da USF durante o seu internamento

RESUMO - Introdução: Através da elaboração do presente projeto de investigação pretendeu-se analisar o que poderá influenciar o custo total de um utente internado, inscrito numa USF, que foi seguidamente internado no setor hospitalar. Recorreu-se à base de dados de uma USF e de um hospital, ambos pertencentes à ARS Alentejo do ano de 2010. O objetivo central consiste em estudar a relação do volume de consultas da USF e se o tipo de admissão no hospital, sendo ela programada ou não programada, explica a variância o custo do internamento. Metodologia: Foi efetuado o cruzamento entre os dados dos utentes inscritos na USF e o total de internamento hospitalar, utilizando a sua data de nascimento e respetivo sexo. Após efetuado o cruzamento, através de um procedimento estatístico com base em SPSS, foram estipuladas pressupostos de forma a encontrar uma associação entre o custo do utente internado com as variáveis da base de dados da USF. De seguida, foi verificado se o tipo de admissão do internamento pode ou não influenciar o custo do internamento. Para efetuar tais correlações, optei por separar a amostra consoante alguns dos seus grupos mais frequentes, em que foi desagregado os internamentos referentes ao GCD 14 – Gravidez, Parto e Puerpério e dos utentes pertencentes ao escalão etários dos idosos (mais de 64 anos). Resultados: A variável da idade do utente é a que mais poderá explicar a variância do custo do internamento, apresentando sempre valores significativos para tal relação. As restantes pouco ou nada podem explicar a variância do custo do internamento. Quanto à tipologia de admissão, o facto de ser programado poderá explicar a diminuição dos dias de internamento, que concomitantemente poderá diminuir o custo do internamento, devido a forte correlação existente entre elas (r=0,666). Conclusão: A introdução da integração dos cuidados de saúde a nível primário e secundário poderá ser a solução base para a redução dos gastos desnecessários na saúde. Um maior acompanhamento do utente nos CSP poderá reduzir a frequência hospitalar, como verificamos que as variáveis da USF e o facto de a consulta ser programada podem explicar tal variância.

Avatars and the «Imitation Game» – can machines smile?

Considering Alan Turing’s challenge in «Computing Machinery and Intelligence» (1950) – can machines play the «imitation game»? – it is proposed that the requirements of the Turing test are already implicitly being used for checking the credibility of virtual characters and avatars. Like characters, Avatars aim to visually express emotions (the exterior signs of the existence of feeling) and its creators have to resort to emotion codes. Traditional arts have profusely contributed for this field and, together with the science of anatomy, shaped the grounds for current Facial Action Coding System (FACS) and their databases. However, FACS researchers have to improve their «instruction tables» so that the machines will be able, in a near future, to be programmed to carry out the operation of recognizing human expressions (face and body) and classify them adequately. For the moment, the reproductions have to resort to the copy of real life expressions, and the presente smile of avatars comes from mirroring their human users.

FPGA field oriented control of an axial flux motor-in-wheel

This paper presents the design and the prototype implementation of a three-phase power inverter developed to drive a motor-in-wheel. The control system is implemented in a FPGA (Field Programmable Gate Array) device. The paper describes the Field Oriented Control (FOC) algorithm and the Space Vector Modulation (SVM) technique that were implemented. The control platform uses a Spartan-3E FPGA board, programmed with Verilog language. Simulation and experimental results are presented to validate the developed system operation under different load conditions. Finally are presented conclusions based on the experimental results.

Grafting of adipic anhydride to carbon nanotubes through a Diels-Alder cycloaddition/oxidation cascade reaction

Accepted Manuscript

An algorithmic approach to estimating the minimal number of periodic points for smooth self-maps of simply-connected manifolds

For a given self-map f of M, a closed smooth connected and simply-connected manifold of dimension m ≥ 4, we provide an algorithm for estimating the values of the topological invariant Dm r [f], which equals the minimal number of r-periodic points in the smooth homotopy class of f. Our results are based on the combinatorial scheme for computing Dm r [f] introduced by G. Graff and J. Jezierski [J. Fixed Point Theory Appl. 13 (2013), 63–84]. An open-source implementation of the algorithm programmed in C++ is publicly available at http://www.pawelpilarczyk.com/combtop/.

Reforço ao corte de vigas de betão armado com compósitos de CFRP: valores experimentais vs valores analíticos

Dissertação de mestrado integrado em Engenharia Civil

Characteristics and identification of sites of chagasic ventricular tachycardia by endocardial mapping

OBJECTIVE: To study electrophysiological characteristics that enable the identification and ablation of sites of chagasic tachycardia. METHODS: Thirty-one patients with chronic Chagas' heart disease and sustained ventricular tachycardia (SVT) underwent electrophysiological study to map and ablate that arrhythmia. Fifteen patients had hemodinamically stable SVT reproducible by programmed ventricular stimulation, 9 men and 6 women with ages ranging from 37 to 67 years and ejection fraction varying from 0.17 to 0.64. Endocardial mapping was performed during SVT in all patients. Radiofrequency (RF) current was applied to sites of presystolic activity of at least 30 ms. Entrainment was used to identify reentrant circuits. In both successful and unsuccessful sites of RF current application, electrogram and entrainment were analyzed. RESULTS: Entrainment was obtained during all mapped SVT. In 70.5% of the sites we observed concealed entrainment and ventricular tachycardia termination in the first 15 seconds of RF current application. In the unsuccessful sites, significantly earlier electrical activity was seen than in the successful ones. Concealed entrainment was significantly associated with ventricular tachycardia termination. Bystander areas were not observed. CONCLUSION: The reentrant mechanism was responsible for the genesis of all tachycardias. In 70.5% of the studied sites, the endocardial participation of the slow conducting zone of reentrant circuits was shown. Concealed entrainment was the main electrophysiological parameter associated with successful RF current application. There was no electrophysiological evidence of bystander regions in the mapped circuits of SVT.

Ventricular evoked response in patients with hypertrophic obstructive cardiomyopathy treated with DDD pacing

OBJECTIVE: To assess the changes in ventricular evoked responses (VER) produced by the decrease in left ventricular outflow tract gradient (LVOTG) in patients with hypertrophic obstructive cardiomyopathy (HOCM) treated with dual-chamber (DDD) pacing. METHODS: A pulse generator Physios CTM (Biotronik, Germany) was implanted in 9 patients with severe drug-refractory HOCM. After implantation, the following conditions were assessed: 1) Baseline evaluation: different AV delay (ranging from 150ms to 50 ms) were sequentially programmed during 5 to 10 minutes, and the LVOTG (as determined by Doppler echocardiography) and VER recorded; 2) standard evaluation, when the best AV delay (resulting in the lowest LVOTG) programmed at the initial evaluation was maintained so that its effect on VER and LVOTG could be assessed during each chronic pacing evaluation. RESULTS: LVOTG decreased after DDD pacing, with a mean value of 59 ± 24 mmHg after dual chamber pacemaker, which was significantly less than the gradient before pacing (98 + 22mmHg). An AV delay >100ms produced a significantly lower decrease in VER depolarization duration (VER DD) when compared to an AV delay <=100ms. Linear regression analyses showed a significant correlation between the LVOTG values and the magnitude of VER (r=0.69; p<0.05) in the 9 studied patients. CONCLUSION: The telemetry obtained intramyocardial electrogram is a sensitive means to assess left ventricular dynamics in patients with HOCM treated with DDD pacing.

Predictive value of clinical and electrophysiological variables in patients with chronic chagasic cardiomyopathy and nonsustained ventricular tachycardia

OBJECTIVE: Risk stratification of patients with nonsustained ventricular tachycardia (NSVT) and chronic chagasic cardiomyopathy (CCC). METHODS: Seventy eight patients with CCC and NSVT were consecutively and prospectively studied. All patients underwent to 24-hour Holter monitoring, radioisotopic ventriculography, left ventricular angiography, and electrophysiologic study. With programmed ventricular stimulation. RESULTS: Sustained monomorphic ventricular tachycardia (SMVT) was induced in 25 patients (32%), NSVT in 20 (25.6%) and ventricular fibrillation in 4 (5.1%). In 29 patients (37.2%) no arrhythmia was inducible. During a 55.7-month-follow-up, 22 (28.2%) patients died, 16 due to sudden death, 2 due to nonsudden cardiac death and 4 due to noncardiac death. Logistic regression analysis showed that induction was the independent and main variable that predicted the occurrence of subsequent events and cardiac death (probability of 2.56 and 2.17, respectively). The Mantel-Haenszel chi-square test showed that survival probability was significantly lower in the inducible group than in the noninductible group. The percentage of patients free of events was significantly higher in the noninducible group. CONCLUSION: Induction of SMVT during programmed ventricular stimulation was a predictor of arrhythmia occurrence cardiac death and general mortality in patients with CCC and NSVT.

Enhancing longevity of pacemakers through reprogramming. Underutilization and cost-effectiveness

OBJECTIVE: This study was performed to observe the number of pacemakers that had never been reprogrammed after implantation, and the effect of optimised output programming on estimated longevity of pulse generators in patients with pacemaker METHODS: Sixty patients with Teletronics Reflex pacemakers were evaluated in a pacemaker clinic, from the time of the beginning of its activities, in June 1998, until March 1999. Telemetry was performed during the first clinic visit, and we observed how many pulse generators retained nominal output settings of the manufactures indicating the absence of reprogramming until that date. After evaluation of the capture threshold, reprogramming of pacemakers was performed with a safety margin of 2 to 2.5:1, and we compared the estimated longevity based on battery current at the manufacturer's settings with that based on settings achieved after reprogramming. RESULTS: In 95% of the cases, the original programmed setting was never reprogrammed before the patients attended the pacemaker clinic. Reprogramming the pacemaker prolonged estimated pulse generator life by 19.7±15.6 months (35.5%). CONCLUSION: The majority of the pacemakers evaluated had never been reprogrammed. Estimated pulse generator longevity can be prolonged significantly, using this simple, safe, efficacious, and cost-effective procedure.