Teores de nutrientes na folha, qualidade do suco e massa seca de raizes de laranja-Valência em função da irrigação e fertirrigação

O presente trabalho foi desenvolvido na Área Experimental de Irrigação da Faculdade de Ciências Agrárias e Veterinárias de Jaboticabal/Unesp, com o objetivo de avaliar o efeito da fertirrigação sobre o teor foliar de macro e de micronutrientes, a massa fresca de raízes e a qualidade do suco de frutos em um pomar de laranja-'Valência'. Os tratamentos utilizados foram: (SI) sem irrigação e adubação com fertilizante sólido parcelado em quatro vezes; (MI-100) fertirrigação por microaspersão com 100% da evapotranspiração; (MI-50) fertirrigação por microaspersão com 50% da evapotranspiração; (G-100) fertirrigação por gotejamento com 100% da evapotranspiração; e (G-50) fertirrigação por gotejamento com 50% da evapotranspiração. Os teores de macro e micronutrientes nas folhas não foram alterados pela irrigação, pelos sistemas de fertirrigação e pela lâmina de água aplicada. A acidez total titulável foi superior no tratamento sem irrigação, e a % de suco no fruto e ratio não foram afetadas pelos tratamentos com e sem irrigação. A massa fresca de raiz foi maior nos tratamentos irrigados, porém não foram constatadas para esse parâmetro diferenças entre os sistemas de gotejamento e microaspersão. A maior concentração de raízes ocorreu até 10 cm de profundidade e até 30 cm de distância do emissor.

Resistência de genótipos de feijão-vagem ao ataque de Zabrotes subfasciatus (Bohemann, 1833) (Coleoptera: Chrysomelidae)

O feijão-vagem (Phaseolus vulgaris L.) pode sofrer ataque de carunchos, como os da espécie Zabrotes subfasciatus (Bohemann, 1833) (Coleoptera: Chrysomelidae), afetando, diretamente, a qualidade das vagens e sementes e deixando-as inviáveis para o consumo e comercialização. A fim de buscar uma alternativa para o controle deste inseto, foram determinados os tipos e graus de resistência, envolvidos em genótipos de feijão-vagem, ao ataque de Z. subfasciatus, em testes com e sem chance de escolha. Os genótipos utilizados foram UEGD7, UEG05, UEG06, UEG11, UEG13, UEG15, UEG18, UEG19 e UEG26, com quatro repetições. No teste com chance de escolha, os parâmetros avaliados foram o número de ovos viáveis, inviáveis e total e a atratividade dos adultos pelos genótipos. No teste sem chance de escolha, foram avaliados o número de ovos viáveis, inviáveis e total, massa seca consumida e massa seca consumida por inseto, massa e longevidade dos adultos, período de ovo a adulto, razão sexual e número e percentagem de insetos emergidos. Concluiu-se que o genótipo UEG05 foi o menos preferido por Z. subfasciatus, para oviposição, em teste com chance de escolha. O UEG13 foi altamente resistente e UEG05, UEG15 e UEG19 foram moderadamente resistentes. O UEG18 foi susceptível e os demais genótipos foram altamente susceptíveis a Z. subfasciatus.

Florescimento e frutificação de lichieiras em função do anelamento de ramos

Avaliou-se o efeito do anelamento de ramos sobre o florescimento e frutificação de lichieiras 'Bengal' com 17 anos de idade. Os tratamentos constaram de anelamento em ramos ou pernadas principais e ramos de 6; 4 e 2 cm de diâmetro, além do controle. O delineamento utilizado foi em blocos casualizados, com cinco repetições. As avaliações quanto à floração foram: percentagem de floração e comprimento de inflorescências por quadrante e árvore; quanto à frutificação, avaliaram-se: vingamento de frutos maduros por panícula, massa, diâmetros longitudinal e equatorial dos frutos, sólidos solúveis totais, época de colheita e rendimento. O anelamento nos ramos principais induziu maior florescimento, sem alterar as características das inflorescências; não houve diferenças no vingamento de frutos, mas o aumento na floração incrementou o rendimento por árvore, com significativa antecipação da colheita.

Manganês na nutrição e na produção de massa seca do capim-mombaça

There are few studies that relate the micronutrient manganese nutritional status and production of fodder. The objective was to evaluate the application of manganese in the nutrition and growth of Mombaca grass. The completely randomized design was used with five manganese levels (0, 15, 30, 60, 120 mg dm(-3)) and four replicates. Each experimental unit consisted of a pot filled with 3.5 dm(-3) of soil from Oxisol (Mn = 0.6 mg dm(-3)), containing four plants. Two harvests were set, the first 44 days after sowing and the second 38 days after the first cut. The concentration of manganese in the soils, the manganese content of leaves, number of tillers, plant height, shoot dry mass in each slice and the root system of Mombaca grass were evaluated. The applied rates of manganese resulted in increased accumulation of Mn in the plant, and there was an increase in dry mass of Mombaca grass, with maximum production, obtained from derivation, of 5.9 and 6.3 g plant(-1) for levels of 121 and 71 mg dm(-3) of Mn in the first and second cut respectively. The Mombaca grass has showed high manganese's tolerance, the critical level of toxicity was 841 mg kg(-1) in the second cut.

Modos de aplicação de zinco na nutricão e na produção de massa seca de plantas de trigo

Zinc application methods can affect the nutrition and the initial development of the wheat. Thus, the aim of this work was to analyze the different ways of Zn application in the soil, on nutrition and on dry matter production. A completely randomized experimental design with four replications was used. The experiment was composed by the following Zn application treatments: control (no zinc application); soil incorporation, furrow located, seeds treatment and leaf pulverization. The experimental unit was composed of a pot filled with 7 L of soil. Morphological traits for each plant were determined on 52 days after emergence by the evaluations of plant height, internodes number, tillers number and aerial part dry matter. Still, the soil and plant chemical analysis was accomplished. The furrow located method provided larger concentrations of the micronutrient available. The zinc application methods did not influence the initial growth of the wheat plants. The zinc concentration in leaves was influenced by the different application methods, being the leaf pulverization the one that was caused the largest zinc accumulation on aerial part dry matter.

Acúmulo de massa seca e marcha de absorção de nutrientes em mudas de goiabeira 'Pedro Sato'

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito da sucessão com leguminosas sob diferentes níveis de calagem no desenvolvimento e micorrização do trigo

Estudou-se, em areia quartzosa, em Assis (SP), a influência da calagem e de leguminosas para adubação verde sobre o desenvolvimento e micorrização do trigo. Verificou-se o efeito do pousio, do cultivo da soja e dos adubos verdes Crotalaria paulina, Crotalaria juncea e mucuna-preta (Stizolobium aterrimum), e da dosagem de calcário 0, 2 e 4 t/ha sobre os seguintes fatores: massa das raízes e da parte aérea e produtividade de grãos de trigo; teores de fósforo no solo e na folha-bandeira; percentagem de colonização e número de esporos de fungos micorrízicos no solo. A percentagem do sistema radicular do trigo, colonizado por fungos micorrízicos arbusculares aos 21 dias da emergência, e a massa de matéria seca da parte aérea e de grãos foram maiores nos tratamentos com aplicação de calcário e nos cultivados com C. paulina. A colonização do sistema radicular por fungos micorrízicos arbusculares influenciou positivamente o desenvolvimento da parte aérea e a produção de grãos do trigo. O teor de fósforo no solo e a micorrização não correlacionaram com o estado nutricional da planta em relação ao fósforo.

Massa de forragem, composição morfológica e química de capim-tanzânia sob diferentes dias de descanso e altura de resíduo pós-pastejo

The experiment was conducted at UNESP/FCAV, Jaboticabal, SP, with the objective of evaluating the influence of the rest period and height of the residue post-grazing on the dry matter mass, morphologic composition and on the chemical composition of the Tanzania-grass pre-grazing condition, under rotational grazing. The treatments consisted of the combination of two rest periods (25 and 35 days) and two residue height post-grazing (30 and 50 cm), as a complete randomized design in factorial arrangement 2 x 2, with three replications, with the grazing cycles considered as sub plots. The herbage mass of stem, leaves, dead material and the leaf: stem ratio were significantly influenced (P<0.05) by the grazing cycles. The percentage of CP in the leaf and stem and the NDF in the stem, leaf and whole plant were influenced positively (P<0.05) by the grazing cycles. It was observed that the short rest periods associated with the smallest residue height post-grazing presented the best results in terms of herbage mass and chemical characteristics of the herbage.

Produção de massa seca e nutrição de cultivares de arroz de terras altas sob condição de déficit hídrico e adubação silicatada

Although silicon has not been considered an essential element for plant growth and development, it has provided several benefits for the rice crop, especially under biotic and abiotic stress. The objective of this work was to evaluate macronutrient and silicon levels in upland rice cultivars cropped under water deficit and silicon fertilization. The experiment was carried out in greenhouse and the design was the completely randomized block, analyzed as a 2 x 2 x 2 factorial, which consisted of two cultivars, 'Maravilha' (modern group) and 'Caiapo' (traditional group), two silicon rates (0 and 350 kg ha(-1)) and two soil water tensions (-0.025 MPa and -0.050 MPa). Plant dry matter of the 'Maravilha' cultivar was higher compared to the other material. Higher soil water tensions decreased plant dry matter and macronutrient levels. Upland rice cultivars respond distinctively to soil water tensions and silicon rates.

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes

Aproveitamento de resíduos de cinza da cana de açúcar em massas cerâmicas

This study aimed to investigate the use of cane sugar ashes from small-scale stills of Eunápolis region, state of Bahia, in pottery mass that can be developed as porcelain stoneware. Bahia is the second largest producer of rum distillery in Brazil. In the production of rum is produced residue called bagasse, which is used to generate electricity in Power plants and in the distillery itself, generating ashes as residue, which is played in nature, causing environmental damage. We studied 5 (five) formulations of 0% 10% 20%, 30% and 40% by weight of the ash, without ignition and 3 (three) formulations of 10%, 20% and 30% with gray ash temperature of 1250ºC. The formulation at 0% by weight of ash was used for a comparison between the traditional mass of porcelain stoneware and the masses with the addition of ash calcined, replacing feldspar. The percentage by weight of kaolin and of Clay was kept the same, 30%, and all raw materials were derived from the state of Bahia. The samples were made in uniaxial array with dimensions of (60 x 20 x 5) mm and compressed to a pressure of 45 MPa. Assays were performed to characterize the raw by X-ray fluorescence, X-ray diffraction, ATD and ATG and Dilatometric analysis. The samples were sintered at temperatures of 1100°C, 1150°C, 1200°C and 1250°C, for the specimens with the ashes without ash and 1150° C and 1200° C for specimens with the gray level of calcined 60 minutes. and then we made a cooling ramp with the same rate of warming until reach ambient temperature. The sintered bodies were characterized by water absorption, porosity, linear shrinkage, bending strength and XRD of the fracture surface and the results analyzed. It was proven, after results of tests performed, that it is possible to use the ash residue of sugar cane bagasse on ceramic coating with the addition of up to 10% wt of the residue ash

Modelagem numérica de escoamento em padrão anular com transferência de calor e massa

Annular flow is the prevailing pattern in transport and energy conversion systems and therefore, one of the most important patterns in multiphase flow in ducts. The correct prediction of the pressure gradient and heat transfer coefficient is essential for optimizing the system s capacity. The objective of this work is to develop and implement a numerical algorithm capable of predicting hydrodynamic and thermal characteristics for upflow, vertical, annular flow. The numerical algorithm is then complemented with the physical modeling of phenomena that occurs in this flow pattern. These are, turbulence, entrainment and deposition and phase change. For the development of the numerical model, axial diffusion of heat and momentum is neglected. In this way the time-averaged equations are solved in their parabolic form obtaining the velocity and temperature profiles for each axial step at a time, together with the global parameters, namely, pressure gradient, mean film thickness and heat transfer coefficient, as well as their variation in the axial direction. The model is validated for the following conditions: fully-developed laminar flow with no entrainment; fully developed laminar flow with heat transfer, fully-developed turbulent flow with entrained drops, developing turbulent annular flow with entrained drops, and turbulent flow with heat transfer and phase change

Estudo de formulação de massa para aplicação em placas cerâmicas

The sector of civil construction is strongly related to the red ceramic industry. This sector uses clay as raw material for manufacturing of various products such as ceramic plates. In this study, two types of clay called clay 1 and clay 2 were collected on deposit in Ielmo Marinho city (RN) and then characterized by thermogravimetric analysis (TG/DTG), differential thermal analysis (DTA), X-ray diffraction (XRD), X-ray fluorescence (XRF), rational analysis and particle size distribution and dilatometric analyses. Ceramic plates were manufactured by uniaxial pressing and by extrusion. The plates obtained by pressing were produced from the four formulations called 1, 2, 3 and 4, which presented, respectively, the following proportions by mass: 66.5% clay 1 and 33.5% clay 2, 50% clay 1 and 50% clay 2, 33.5% clay 1 and 66.5% clay 2, 25% clay 1 and 75% clay 2. After firing at 850, 950 and 1050 °C with heating rate of 10 °C/min and soaking time of 30 minutes, the following technological properties were determined: linear firing shrinkage, water absorption, apparent porosity, apparent specific mass and tensile strength (3 points). The formulation containing 25% clay 1 produced plates with most satisfactory results of water absorption and mechanical resistance, because of that it was chosen for manufacturing plates by extrusion. A single firing cycle was established for these plates, which took place as follow: heating rate of 2 °C/min up to 600 ºC with soaking time of 60 minutes, followed by heating using the same rate up to 1050 ºC with soaking time of 30 minutes. After this cycle, the same technological properties investigated in the plates obtained by pressing were determined. The results indicate (according to NRB 13818/1997) that the plates obtained by pressing from the mixture containing 25 wt% clay 1, after firing at 1050 °C, reach the specifications for semi-porous coating (BIIb). On the other hand, the plates obtained by extrusion were classified as semi-stoneware (group AIIa)

Importância do fluxo de massa e difusão no suprimento de potássio ao algodoeiro como variável de água e potássio no solo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência do etil-trinexapac no acúmulo, na distribuição de nitrogênio (15N) e na massa de grãos de arroz de terras altas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)