A lifespan perspective on creativity and innovation at work

In this review, we address the relationship of aging with creativity and innovation at work. Organizing our review around the triad of person, environment, and behavior, we first discuss relevant theories and empirical findings from the creativity/innovation and aging literatures, and then review meta-analytical and primary studies on the aging-creativity/innovation relationship. In contrast to prevalent age stereotypes, we show that the empirical literature does not support direct, zero-order relationships, but that more complex (moderated, indirect, and curvilinear) relationships are highly plausible. We illustrate this point with a discussion of research on aging and scientific creativity. Finally, we outline opportunities for future research, both methodological and conceptual.

Zur lexikographischen Darstellung der Adjektivsyntax in neueren einsprachigen Wörtbüchern des Deutschen

The main objects of the investigation were the syntactic functions of adjectives. The reason for the interest in these functions are the different modes of use, in which an adjective can occur. All together an adjective can take three different modes of use: attributive (e. g. a fast car), predicative (e. g. the car is fast) and adverbial (e. g. the car drives fast). Since an adjective cannot always take every function, some dictionaries (esp. learner s dictionaries) deliver information within the lexical entry about any restrictions. The purpose of the research consisted of a comparison in relation to the lexical entries of adjectives, which were investigated within four selected monolingual German-speaking dictionaries. The comparison of the syntactical data of adjectives were done to work out the differences and the common characteristics of the lexical entries concerning the different modes of use and to analyse respective to assess them. In the foreground, however, were the differences of the syntactical information. Concerning those differences it had to be worked out, which entry is the grammatically right one respective if one entry is in fact wrong. To find that out an empirical analysis was needed, which based on the question in which way an adjective is used within a context as far as there are no conforming data within the dictionaries. The delivery of the correctness and the homogeneity of lexical entries of German-speaking dictionaries are very important to support people who are learning the German language and to ensure the user friendliness of dictionaries. Throughout the investigations it became clear that in almost half of the cases (over 40 %) syntactical information of adjectives differ from each other within the dictionaries. These differences make it for non-native speakers of course very difficult to understand the correct usage of an adjective. Thus the main aim of the doctoral thesis was it to deliver and to demonstrate the clear syntactical usage of a certain amount of adjectives.

Dodecagonal space vector diagram using cascaded H-Bridge inverters

This paper proposes the development of dodecagonal (12-sided) space vector diagrams from cascaded H-Bridge inverters. As already reported in literatures, dodecagonal space vector diagrams have many advantages over conventional hexagonal ones. Some of them include the absence of 6n±1, (n=odd) harmonics from the phase voltage, and the extension of the linear modulation range. In this paper, a new power circuit is proposed for generating multiple dodecagons in the space vector plane. It consists of two cascaded H-Bridge cells fed from asymmetric dc voltage sources. It is shown that, with proper PWM timing calculation and placement of active and zero vectors, a very high quality of sine-wave can be produced. At the same time, the switching frequency of individual cells can be reduced substantially. Detailed PWM analysis, one design example and an elaborate simulation study is presented to support the proposed idea.

The thickness dependence of the electrical and dielectric properties in the laser ablated SrBi2Nb2O9 thin films

he thickness dependence of the electrical properties in the thin films of uniaxial SrBi2Nb2O9 has been studied in this report. According to many published literatures, it could be an effective way to identify the basic conduction process. The laser ablation was chosen as the deposition technique to ensure an oriented growth and a proper stoichiometric deposition. The structural, dielectric and conduction properties were studied as a function of thickness. The films showed good ferroelectric properties, an ordered growth, and a space-charge controlled conduction process, which was double checked by reversing the polarity of the applied voltage, and also by examining the high field current response of the sample varying in thickness.

Soil aggressivity consideration for laying petroleum pipelines

The magnitude and volume of transportation of petroleum products (both crude and finished products) has necessitated constructing dedicated pipelines from the refineries to the various consumer centers. The present status and scenario of pipeline transportation has been briefly described. Published literatures covering geotechnical engineering aspects, especially corrosion studies for pipelines are scanty. Available literature has been summarized. Main topic includes soil resistivity survey, classification based on resistivity and various parameters of chemical analysis. Detailed analysis has been carried out from the data generated through field investigation and laboratory tests on soil samples obtained from different locations along the two selected pipeline route where they are to be constructed. Typical data has been analysed for aggressivity. Summary of aggressivity analysis has been presented for the two field cases and modification has been suggested for existing practice.

Estimation of design basis earthquake using region-specific M-max, for the NPP site at Kalpakkam, Tamil Nadu, India

The objective of the paper is to estimate Safe Shutdown Earthquake (SSE) and Operating/Design Basis Earthquake (OBE/DBE) for the Nuclear Power Plant (NPP) site located at Kalpakkam, Tamil Nadu, India. The NPP is located at 12.558 degrees N, 80.175 degrees E and a 500 km circular area around NPP site is considered as `seismic study area' based on past regional earthquake damage distribution. The geology, seismicity and seismotectonics of the study area are studied and the seismotectonic map is prepared showing the seismic sources and the past earthquakes. Earthquake data gathered from many literatures are homogenized and declustered to form a complete earthquake catalogue for the seismic study area. The conventional maximum magnitude of each source is estimated considering the maximum observed magnitude (M-max(obs)) and/or the addition of 0.3 to 0.5 to M-max(obs). In this study maximum earthquake magnitude has been estimated by establishing a region's rupture character based on source length and associated M-max(obs). A final source-specific M-max is selected from the three M-max values by following the logical criteria. To estimate hazard at the NPP site, ten Ground-Motion Prediction Equations (GMPEs) valid for the study area are considered. These GMPEs are ranked based on Log-Likelihood (LLH) values. Top five GMPEs are considered to estimate the peak ground acceleration (PGA) for the site. Maximum PGA is obtained from three faults and named as vulnerable sources to decide the magnitudes of OBE and SSE. The average and normalized site specific response spectrum is prepared considering three vulnerable sources and further used to establish site-specific design spectrum at NPP site.

Dilemas del paraíso : viaje, utopía ymundanidad en la literatura árabe

Resumen: La utopía y el relato de viaje conforman dos narrativas complementarias que describen mundos desconocidos, pero largamente anhelados. No obstante, en el contexto medieval, no podemos interpretar el concepto de utopía en el sentido político propio de la Modernidad, moriano, del término, sino como un proceso de construcción de expectativas que, a partir de un mismo modelo formal que se mantendrá a lo largo del tiempo en todas las manifestaciones de un país o sociedad ideal, tiende a ubicar en una lejanía inaccesible pero narrable la satisfacción de las necesidades de un presente difícil. Este es el caso de la Abundantia, la más antigua forma de utopía, vinculada al reino de Saturno y a sus múltiples versiones medievales: la Cucaña, el país de Jauja, el Dorado. Presente bajo diferentes formas en prácticamente todas las literaturas europeas occidentales, también la literatura árabe medieval hará un uso particular de la utopía y del relato de viaje, en donde incorporará su propia y específica visión religiosa y cultural. Nos proponemos entonces describir el modelo formal propio de la literatura utópica y la modalidad que adquirió el relato utópico de la Abundantia en el Islam, en particular en la leyenda de la Ciudad de Cobre, del geógrafo andalusí Abu Hamid al-Garnati, y su posterior desarrollo en Las mil y una noches.

El cuento de la doncella sin manos : versiones hispánicas medievales y la tradición oral en América

Resumen: A partir de la primera versión literaria en lengua vernácula del “Cuento de la doncella sin manos”, escrita por Philippe de Remi en el siglo XIII, la literatura medieval no dejó de reelaborar el relato a lo largo y a lo ancho del Occidente europeo. Del periodo que abarca desde el siglo XIII hasta el XVII nos llegan, por lo menos, unas treinta y cuatro versiones escritas solo en los ámbitos románico y germánico. Existe asimismo una tradición arábiga del cuento, probablemente de origen semítico, que constituiría, según algunos autores, una rama narrativa independiente. En la tradición oral el relato ha pervivido hasta nuestros días, en diversos países del mundo, incluida América del Sur, particularmente Brasil, Chile y la Argentina. El legado folclórico en Europa, inicialmente recopilado y puesto por escrito por los hermanos Grimm en 1812, presenta, ciertamente, numerosos puntos de contacto con las versiones americanas. Sin embargo, se ha establecido un vínculo aún más estrecho entre estas y los Cuentos populares españoles recogidos por Aurelio Espinosa en 1923, por un lado, así como también con una de las tres versiones provenientes del ámbito árabe. Luego de trazar un panorama histórico del corpus y estudiar los puntos de contacto entre la tradición europea y la americana, nos centraremos en el análisis de las versiones sudamericanas, particularmente las recogidas en la Argentina

Las Prophetiae Merlini de Geoffrey de Monmouth en los Baladros castellanos: estado de la cuestión

Resumen: La Historia regum Britanniae (circa 1139) del obispo galés Geoffrey de Monmouth, texto destacado en el corpus latino medieval a causa de sus proyecciones tanto historiográficas como ficcionales, tiene como objeto referir los actos de todos los monarcas célticos de la Gran Bretaña anteriores a la conquista germánica. En este propósito, sus capítulos 112 a 117 obran como una mise en abîme puesto que las Prophetiae Merlini que allí se leen, atribuidas al famoso mago pero inspiradas en la literatura apocalíptica vétero y neotestamentaria, reproducen proféticamente las grandes líneas de contenido de la propia crónica, e incluso anticipan la restauración definitiva de los celtas derrotados. Aunque Wace, Chrétien de Troyes y la tradición romancística francesa posterior, deudora de la Historia en muchos puntos, desecharon el texto a causa de su agudo hermetismo, el mismo sí se difundió por el continente y reapareció asombrosamente interpolado, en versión castellana, dentro de dos tardíos ejemplares del género caballeresco hispánico, el Baladro del sabio Merlín con sus profecías (Burgos, 1498) y la primera parte de la Demanda del santo Grial (Sevilla, 1535). La presente comunicación tiene como objetivos reseñar los actuales conocimientos de la crítica acerca de esta versión castellana de las Prophetiae y señalar los problemas aún pendientes de resolución; serán consideradas las contribuciones fundamentales relativas al original latino y, también, a las versiones francesas conservadas, dada la posibilidad de que nuestra traducción tenga una fuente gala

Self-instability and bending behaviors of nano plates

This paper aims at investigating the size-dependent self-buckling and bending behaviors of nano plates through incorporating surface elasticity into the elasticity with residual stress fields. In the absence of external loading, positive surface tension induces a compressive residual stress field in the bulk of the nano plate and there may be self-equilibrium states corresponding to the plate self-buckling. The self-instability of nano plates is investigated and the critical self-instability size of simply supported rectangular nano plates is determined. In addition, the residual stress field in the bulk of the nano plate is usually neglected in the existing literatures, where the elastic response of the bulk is often described by the classical Hooke’s law. The present paper considered the effect of the residual stress in the bulk induced by surface tension and adopted the elasticity with residual stress fields to study the bending behaviors of nano plates without buckling. The present results show that the surface effects only modify the coefficients in corresponding equations of the classical Kirchhoff plate theory.

The effects of surface tension on the elastic properties of nano structures

In the absence of external loading, surface tension will induce a residual stress field in the bulk of nano structures. However, in the prediction of mechanical properties of nano structures, the elastic response of the bulk is usually described by classical Hooke’s law, in which the aforementioned residual stress was neglected in the existing literatures. The present paper investigates the influences of surface tension and the residual stress in the bulk induced by the surface tension on the elastic properties of nano structures. We firstly present the surface elasticity in the Lagrangian and the Eulerian descriptions and point out that even in the case of infinitesimal deformations the reference and the current configurations should be discriminated; otherwise the out-plane terms of surface displacement gradient, associated with the surface tension, may sometimes be overlooked in the Eulerian descriptions, particularly for curved and rotated surfaces. Then, the residual stress in the bulk is studied through the non-classical boundary conditions and used to construct the linear elastic constitutive relations for the bulk material. Finally, these relations are adopted to analyze the size-dependent properties of pure bending of Al nanowires. The present results show that surface tension will considerably affect the effective Young’s modulus of Al nanowires, which decrease with either the decrease of nanowires thickness or the increase of the aspect ratio.

A surface energy model and application to mechanical behavior analysis of single crystals at sub-micron scale

Size effects of mechanical behaviors of materials are referred to the variation of the mechanical behavior due to the sample sizes changing from macroscale to micro-/nanoscales. At the micro-/nanoscale, since sample has a relatively high specific surface area (SSA) (ratio of surface area to volume), the surface although it is often neglected at the macroscale, becomes prominent in governing the energy effect, although it is often neglected at the macroscale, becomes prominent in governing the mechanical behavior. In the present research, a continuum model considering the surface energy effect is developed through introducing the surface energy to total potential energy. Simultaneously, a corresponding finite element method is developed. The model is used to analyze the axial equilibrium strain problem for a Cu nanowire at the external loading-free state. As another application of the model, from dimensional analysis, the size effects of uniform compression tests on the microscale cylinder specimens for Ni and Au single crystals are analyzed and compared with experiments in literatures. (C) 2009 Elsevier B.V. All rights reserved.

Palinologia de espécies de Convolvulaceae Juss. ocorrentes na região Sudeste, Brasil - tribos Merremieae e Cuscuteae

A família Convolvulaceae é cosmopolita, com ampla distribuição nos trópicos e subtrópicos. No Brasil, ocorrem 18 gêneros e cerca de 340 espécies, sendo 151 endêmicas de campos rupestres, cerrados ou caatingas. Este trabalho refere-se ao estudo palinotaxonômico dos grãos de pólen de táxons de Convolvulaceae ocorrentes na região sudeste, Brasil tribos Merremieae e Cuscuteae. Foram analisados os grãos de pólen de 6 táxons de Cuscuta L., 12 táxons de Merremia Dennst. e 2 táxons de Operculina S. Manso. O material botânico utilizado foi obtido através de exsicatas depositadas nos principais herbários nacionais. Os grãos de pólen foram tratados pelo método de acetólise, sendo posteriormente mensurados, descritos, fotomicrografados em microscopia de luz. Para análise em microscópio eletrônico de varredura (MEV), as anteras foram rompidas e os grãos de pólen, não acetolisados, espalhados sobre uma fita de carbono. Os resultados obtidos neste estudo demonstraram que: na tribo Cuscuteae foram registrados pela primeira vez, grãos de pólen colporados; na tribo Merremieae, a morfologia polínica das espécies de Merremia mostraram variações já registradas em publicações anteriores porém, a ausência de polaridade em alguns táxons é um resultado inédito. O número, a forma das aberturas e a presença de opérculo, a ornamentação de base, ou seja, microrretículo, retículo ou perfuração e as supra ornamentações (grânulos, espinhos e microespinhos) também foram registros importantes aqui mencionados. No gênero Operculina, os resultados aqui expressos foram novos, uma vez que as poucas bibliografias anteriores fizeram menção apenas à quantidade de aberturas para o gênero.O Tamanho, a forma e a ornamentação da sexina características são descritas pela primeira vez neste estudo. Os resultados aqui obtidos permitem confirmar que Cuscuta, Merremia e Operculina puderam ser identificados através dos atributos polínicos bem como, suas espécies foram separadas na chave aqui elaborada. Confirma-se, assim, que os gêneros estudados são euripolínicos.

Structure-change-dependent transmittance of PtOx thin film in super-resolution near-field structure: Diffraction effect analysis

To study working mechanism of super-resolution near-field structure (super-RENS) optical disk from a far-field optics view is very necessary because of the actual far-field writing/readout process in the optical disk system. A Gaussian diffraction model based on Fresnel-Kirchhoff diffraction theory of PtOx-type super-RENS has been set up in this Letter. The relationship between micro-structural deformation (change of bubble structure and refractive index profile) with far-field optical response of PtOx thin film has been studied with it in detail. The simulation results are in good agreement with the experimental results reported in literatures with a designed configuration. These results may provide more quantitative information for better understanding of the working mechanism of metal-oxide-type super-RENS. (c) 2007 Elsevier B.V. All rights reserved.

四川地区出土古玻璃的质子激发X荧光分析

abstract {Proton induced X-ray emission (PIXE) technique is an effective method for the chemical composition analysis of ancient glass samples without destruction. Chemical composition of the ancient glass samples dated from the Warring States Period (770-476 B.C.) to the Six Dynasties Period (220-589 A.D.), which were unearthed in Sichuan area, was quantitatively determined by the PIXE technique. The results show that the glass Bi (disc) and the glass eye beads of the Warring States Period all belong to the PbO-BaO-SiO₂ system. According to the composition and shape, we infer that these glass Bi and eye beads were made in China. Whereas, the chemical compositions of the glass ear pendants and beads of the Six Dynasties Period are varied, including K₂O-CaO-SiO₂, K₂O-SiO₂ and other glass systems. Based on the obtained results and those from literatures, some questions related to the technical propagation of the ancient Chinese glass are discussed.}