Time lag between catching and curing of fish and its influence on the finished product. 1. Mackerel

A study is made to determine the maximum permissible time lag both under iced and not iced storage conditions between the catching of mackerel (Rastrelliger kanagurta) and its curing, so that the quality of the finished product is within tolerable limits. Based on physical, chemical, bacteriological and taste panel studies the maximum time lag permissible is fixed as 8hrs under not iced condition and 3 days under iced condition. Icing of fish is also found to affect the tasting qualities of the finished product.

A review on oil sardine 2. Preservation by canning, curing and smoking

Commercial canning of oil sardine (Sardinella longiceps) in India is a relatively new procedure. Although 7 firms are engaged in canning this compares poorly with the abundance of the fish. There are often wide variations in the quality of the canned fish and important chemical and physical variations occur in the product once canned. A description of the canning process is given, and production figures compared to those of other countries. Production figures for 1965 to 1969 are given. These show that production increased from 1.2 to 1.5 million cans, but that there was a peak in 1967 when 3.2 million can s were produced. Exports of canned marine fish by country, and production of caned sardine by country from 1965 to 1970 are tabulated. The types of containers used and the feasibility of exporting canned fish are considered. Finally, the preparation of cured and smoked products is discussed briefly.

Studies on smoke curing of tropical fishes

Fresh mackerel (Rastrelliger kanagurta), catfish (Tachisurus dussumeri) and sole (Cynoglossus dubis) were gutted, cleaned, washed, brined, and smoked. Though it contributes to the quality of the smoked products, salt does not appear to prevent bacterial growth or spoilage at low concentration. In heavily salted products, salt is found to have a definite preservative action. Smoking lasted roughly 5 hrs for mackerel and 4 hrs for sole. Increasing the smoking time gave the product an unpleasant taste. Fish were then sun-dried to 20% moisture. The fish had been prepared in three groups, (1) turmeric-treated, (2) propionate-treated and control. Turmeric treated samples had a very attractive appearance, especially sole. The course of spoilage, as measured by following changes in total volatile nitrogen content, is tabulated. All controls were spoiled within 3 months; the others remained in good condition for 6 months. Turmeric is considered to be an ideal preservative.

Studies on Colombo-curing of mackerel (Rastrelliger kanagurta)

Results of investigations carried out to improve the process of 'Colombo-curing' of mackerel are presented in this paper. Optimum composition of salt and gorujka puli (malabar tamarind, Garcinia cambogea) to be used in the pickle mixture to give a product of good organoleptic and chemical characteristics have been worked out. Sodium benzoate is used as a preservative against the attack of molds, 'red' etc.

Pickle curing of fish using tartaric acid and garlic as preservatives

Tartaric acid and garlic have proved highly satisfactory as pickling agents when used in combination, giving fishery products of good appearance, texture, taste and shelf life. Full details of the pickling method are given.

Utilization of the fish waste self-brine of fish curing industry as farm fertilizer

Large quantities of self-brine accumulating in curing tanks during the process of commercial fish salting is mostly wasted at present. This liquor exuded from the fish during the process of salting contains considerable amounts of soluble proteins and minerals. Due to the presence of organic matter the self-brine quickly putrefies causing nauseating smell. This renders the whole surroundings insanitary and often leads to health hazards to neighboring localities. Any economic method of utilising this waste brine and converting it into some useful product will be a tangible help to the fish curing industry. Hence, a method is given for converting this waste self-brine into a cheap and efficient fertilizer.

Discriminant analysis of selected variables in the adoption of fish curing

Discriminant functions were worked out for adoption or non-adoption of five improved practices in fish curing. Four variables measured quantitatively formed the basis for discrimination. In four out of five equations, the selected variables were found to discriminate significantly between the adopters and non-adopters.

Analysis of dimensions involved in the option of improved fish curing practices

A statistical analysis was made of the dimensions involved in the adoption of improved fish curing practices.

Effect of mass media on the adoption of fish curing

A study of two factors with two-way classification shows that the main effect of newspaper subscription on the adoption of improved practices in fish curing is significant. The effect of radio ownership appears to be masked by newspaper subscription. The interaction between the two factors was not significant. The study confirms the importance of mass media in adoption.

Smoke curing of catfish (Tachysurus dussumieri)

The results deals with studies undertaken on the preparation of smoked catfish (Tachysurus dussumieri). The proximate composition of raw and smoked fillets are given.

Metrical dental analysis on golden monkey (Rhinopithecus roxellana)

Dental variation in the Chinese golden monkey (Rhinopithecus roxellana) is here evaluated by univariate, bivariate, and multivariate analyses. Allometric analyses indicate that canines and P3s are positively, but other dimensions negatively scaled to mandible and maxilla, and to body size. With the exception of the mesiodistal dimensions of I-1 and M-3, and the buccolingual dimension of Pq, mandibular dental variables show similar scaling relative to body size. Analysis of residuals shows that males have significantly larger canine, P-3 and buccolingual dimensions of the postcanine teeth (M-2 and M-3) than females. A significant difference in shape between the sexes is found in the buccolingual dimension of the upper teeth, but not in the mandible. Unlike the situation in some other species, Female golden monkeys do nor exhibit relatively larger postcanine teeth than males, in fact, the reverse is true, especially for M(2)s and M(3)s. The fact that most of the dental variables show low negative allometry to body size might be related a cold environment that has led to the development of larger body size with I-educed energy loss. When the raw data are examined by Discriminant Function Analysis the sexes are clearly distinguishable.

Physical properties of a hybrid and a nanohybrid dental light-cured resin composite.

This work was aimed at the study of some physical properties of two current light-cured dental resin composites, Rok (hybrid) and Ice (nanohydrid). As filler they both contain strontium aluminosilicate particles, however, with different size distribution, 40 nm-2.5 mum for Rok and 10 nm-1 mum for Ice. The resin matrix of Rok consists of UDMA, that of Ice of UDMA, Bis-EMA and TEGDMA. Degree of conversion was determined by FT-IR analysis. The flexural strength and modulus were measured using a three-point bending set-up according to the ISO-4049 specification. Sorption, solubility and volumetric change were measured after storage of composites in water or ethanol/water (75 vol%) for 1 day, 7 or 30 days. Thermogravimetric analysis was performed in air and nitrogen atmosphere from 30 to 700 degrees C. Surface roughness and morphology of the composites was studied by atomic force microscopy (AFM). The degree of conversion was found to be 56.9% for Rok and 61.0% for Ice. The flexural strength of Rok does not significantly differ from that of Ice, while the flexural modulus of Rok is higher than that of Ice. The flexural strengths of Rok and Ice did not show any significant change after immersion in water or ethanol solution for 30 days. The flexural modulus of Rok and Ice did not show any significant change either after immersion in water for 30 days, while it decreased significantly, even after 1 day immersion, in ethanol solution. Ice sorbed a higher amount of water and ethanol solution than Rok and showed a higher volume increase. Thermogravimetric analysis showed that Rok contains about 80 wt% inorganic filler and Ice about 75 wt%.

Enhancing the carbonation of MgO cement porous blocks through improved curing conditions

The use of reactive magnesia (MgO) as the binder in porous blocks demonstrated significant advantages due to its low production temperatures and ability to carbonate, leading to significant strengths. This paper investigates the enhancement of the carbonation process through different curing conditions: water to cement ratio (0.6-0.9), CO2 concentration (5-20%), curing duration (1-7 days), relative humidity (55-98%), and wet/dry cycling frequency (every 0-3 days), improving the carbonation potential through increased amounts of CO2 absorbed and enhanced mechanical performance. UCS results were supported with SEM, XRD, and HCl acid digestion analyses. The results show that CO2 concentrations as low as 5% can produce the required strengths after only 1 day. Drier mixes perform better in shorter curing durations, whereas larger w/c ratios are needed for continuous carbonation. Mixes subjected to 78% RH outperformed all the others, also highlighting the benefits of incorporating wet/dry cycling to induce carbonation. © 2014 Elsevier Ltd.