Fire management, climate change and their interacting effects on birds in complex Mediterranean landscapes: dynamic distribution modelling of an early-successional species - the near-threatened Dartford Warbler (Sylvia undata)

The current challenge in a context of major environmental changes is to anticipate the responses of species to future landscape and climate scenarios. In the Mediterranean basin, climate change is one the most powerful driving forces of fire dynamics, with fire frequency and impact having markedly increased in recent years. Species distribution modelling plays a fundamental role in this challenge, but better integration of available ecological knowledge is needed to adequately guide conservation efforts. Here, we quantified changes in habitat suitability of an early-succession bird in Catalonia, the Dartford Warbler (Sylvia undata) ― globally evaluated as Near Threatened in the IUCN Red List. We assessed potential changes in species distributions between 2000 and 2050 under different fire management and climate change scenarios and described landscape dynamics using a spatially-explicit fire-succession model that simulates fire impacts in the landscape and post-fire regeneration (MEDFIRE model). Dartford Warbler occurrence data were acquired at two different spatial scales from: 1) the Atlas of European Breeding Birds (EBCC) and 2) Catalan Breeding Bird Atlas (CBBA). Habitat suitability was modelled using five widely-used modelling techniques in an ensemble forecasting framework. Our results indicated considerable habitat suitability losses (ranging between 47% and 57% in baseline scenarios), which were modulated to a large extent by fire regime changes derived from fire management policies and climate changes. Such result highlighted the need for taking the spatial interaction between climate changes, fire-mediated landscape dynamics and fire management policies into account for coherently anticipating habitat suitability changes of early succession bird species. We conclude that fire management programs need to be integrated into conservation plans to effectively preserve sparsely forested and early succession habitats and their associated species in the face of global environmental change.

Role of brachytherapy in the treatment of cancers of the anal canal. Long-term follow-up and multivariate analysis of a large monocentric retrospective series.

BACKGROUND AND PURPOSE: There are few data on long-term clinical results and tolerance of brachytherapy in anal canal cancer. We present one of the largest retrospective analyses of anal canal cancers treated with external beam radiotherapy with/without (±) chemotherapy followed by a brachytherapy boost. MATERIALS AND METHODS: We performed a retrospective analysis of clinical results in terms of efficacy and toxicity. The impact of different clinical and therapeutic variables on these outcomes was studied. RESULTS: From May 1992 to December 2009, 209 patients received brachytherapy after external beam radiotherapy ± chemotherapy. Of these patients, 163 were stage II or stage IIIA (UICC 2002) and 58 were N1-3. According to age, ECOG performance status (PS), and comorbidities, patients received either radiotherapy alone (58/209) or radiochemotherapy (151/209). The median follow-up was 72.8 months. The 5- and 10-year local control rates were 78.6 and 73.9 %, respectively. Globally, severe acute and late G3-4 reactions (NCI-CTC scale v. 4.0) occurred in 11.2 and 6.3 % of patients, respectively. Univariate analysis showed the statistical impact of the pelvic treatment volume (p = 0.046) and of the total dose (p = 0.02) on the risk of severe acute and late toxicities, respectively. Only six patients required permanent colostomy because of severe late anorectal toxicities. CONCLUSION: After a long follow-up time, brachytherapy showed an acceptable toxicity profile and high local control rates in patients with anal canal cancer.

The effects of some variables on CO2 laser-MAG hybrid welding

The CO2-laser-MAG hybrid welding process has been shown to be a productive choice for the welding industry, being used in e.g. the shipbuilding, pipe and beam manufacturing, and automotive industries. It provides an opportunity to increase the productivity of welding of joints containing air gaps compared with autogenous laser beam welding, with associated reductions in distortion and marked increases in welding speeds and penetration in comparison with both arc and autogenous laser welding. The literature study indicated that the phenomena of laser hybrid welding are mostly being studied using bead-on-plate welding or zero air gap configurations. This study shows it very clearly that the CO2 laser-MAG hybrid welding process is completely different, when there is a groove with an air gap. As in case of industrial use it is excepted that welding is performed for non-zero grooves, this study is of great importance for industrial applications. The results of this study indicate that by using a 6 kW CO2 laser-MAG hybrid welding process, the welding speed may also be increased if an air gap is present in the joint. Experimental trials indicated that the welding speed may be increased by 30-82% when compared with bead-on-plate welding, or welding of a joint with no air gap i.e. a joint prepared as optimum for autogenous laser welding. This study demonstrates very clearly, that the separation of the different processes, as well as the relative configurations of the processes (arc leading or trailing) affect welding performance significantly. These matters influence the droplet size and therefore the metal transfer mode, which in turn determined the resulting weld quality and the ability to bridge air gaps. Welding in bead-onplate mode, or of an I butt joint containing no air gap joint is facilitated by using a leading torch. This is due to the preheating effect of the arc, which increases the absorptivity of the work piece to the laser beam, enabling greater penetration and the use of higher welding speeds. With an air gap present, air gap bridging is more effectively achieved by using a trailing torch because of the lower arc power needed, the wider arc, and the movement of droplets predominantly towards the joint edges. The experiments showed, that the mode of metal transfer has a marked effect on gap bridgeability. Transfer of a single droplet per arc pulse may not be desirable if an air gap is present, because most of the droplets are directed towards the middle of the joint where no base material is present. In such cases, undercut is observed. Pulsed globular and rotational metal transfer modes enable molten metal to also be transferred to the joint edges, and are therefore superior metal transfer modes when bridging air gaps. It was also found very obvious, that process separation is an important factor in gap bridgeability. If process separation is too large, the resulting weld often exhibits sagging, or no weld may be formed at all as a result of the reduced interaction between the component processes. In contrast, if the processes are too close to one another, the processing region contains excess molten metal that may create difficulties for the keyhole to remain open. When the distance is optimised - i.e. a separation of 0-4 mm in this study, depending on the welding speed and beam-arc configuration - the processes act together, creating beneficial synergistic effects. The optimum process separation when using a trailing torch was found to be shorter (0-2 mm) than when a leading torch is used (2-4 mm); a result of the facilitation of weld pool motion when the latter configuration is adopted. This study demonstrates, that the MAG process used has a strong effect on the CO2-laser-MAG hybrid welding process. The laser beam welding component is relatively stable and easy to manage, with only two principal processing parameters (power and welding speed) needing to be adjusted. In contrast, the MAG process has a large number of processing parameters to optimise, all of which play an important role in the interaction between the laser beam and the arc. The parameters used for traditional MAG welding are often not optimal in achieving the most appropriate mode of metal transfer, and weld quality in laser hybrid welding, and must be optimised if the full range of benefits provided by hybrid welding are to be realised.

The scope of Baker's law.

656 I. 657 II. 658 III. 660 IV. 661 V. 663 VI. 663 VII. 664 VIII. 664 665 References 665 SUMMARY: Baker's law refers to the tendency for species that establish on islands by long-distance dispersal to show an increased capacity for self-fertilization because of the advantage of self-compatibility when colonizing new habitat. Despite its intuitive appeal and broad empirical support, it has received substantial criticism over the years since it was proclaimed in the 1950s, not least because it seemed to be contradicted by the high frequency of dioecy on islands. Recent theoretical work has again questioned the generality and scope of Baker's law. Here, we attempt to discern where the idea is useful to apply and where it is not. We conclude that several of the perceived problems with Baker's law fall away when a narrower perspective is adopted on how it should be circumscribed. We emphasize that Baker's law should be read in terms of an enrichment of a capacity for uniparental reproduction in colonizing situations, rather than of high selfing rates. We suggest that Baker's law might be tested in four different contexts, which set the breadth of its scope: the colonization of oceanic islands, metapopulation dynamics with recurrent colonization, range expansions with recurrent colonization, and colonization through species invasions.

Simuloinnin hyödyntäminen ajoneuvon kestoikäanalyysissä

Diplomityö tehtiin Patria Land & Armament Oy:n toimeksiannosta. Patria Land & Armament Oy:n tuotteisiin kuuluvat vaativiin maasto-olosuhteisiin soveltuvat sotilasajoneuvot. Tuotesuunnittelussa otetaan huomioon ajoneuvon koko elinkaari, joten väsymismitoitus ja kestoikäanalyysit ovat suunnittelun tärkeitä osa-alueita. Kestoikäanalyysit ovat perinteisesti pohjautuneet mittausten avulla määritettyyn jännityshistoriaan. Työn tavoitteena oli tutkia tietokonesimuloinnin soveltuvuutta maastoajoneuvon jännityshistorian määrittämiseen. Selvityksen perusteella muodostettiin kohdeyrityksen tarpeisiin soveltuva ja kestoikäanalyysiä helpottava simulointiympäristö. Tietokonesimuloinnin tuloksien tarkkuutta tutkittiin mittaamalla todellisen ajoneuvon käyttäytymistä. Simulointiympäristö toteutettiin analysoimalla joustavia kappaleita ADAMS dynamiikkaohjelmistolla. Kappaleiden joustavuus mallinnettiin kelluvan koordinaatiston menetelmällä ja siihen käytettiin PATRAN/NASTRAN elementtimenetelmäohjelmistoa. Simulointiympäristön toimivuus testattiin case-esimerkin avulla. Esimerkissä tutkittiin AMV:n alatukivarren rasituksia. Tuloksista havaittiin, että simuloimalla on mahdollista tuottaa maastoajoneuvon rakenteiden jännityshistoria. Eri parametrien tutkiminen onnistuu vaivattomasti, mutta simuloimalla määritetyn kestoiän absoluuttisiin arvoihin tulee suhtautua varauksella.

Estudo teórico da estrutura eletrônica e da dinâmica induzida por lasers da molécula de HCl

Potential energy and dipole moment curves for the HCl molecule were computed. Calculations were performed at different levels of theory (DFT, MRCI). Spectroscopic properties are reported and compared with experimental data, for validating the theoretical approaches. Interaction of infrared radiation with HCl is simulated using the wave packet formalism. The quantum control model for population dynamics of the vibrational levels, based on pi-pulse theory, is applied. The results demonstrate that wavepackets with specific composition can be built with short infrared laser pulses and provide the basis for studies of H + HCl collision dynamics with infrared laser excitation.

Alloxan-induced diabetes delays repair in a rat model of closed tibial fracture

A closed fracture was performed on the left tibia of 3-month-old Wistar rats weighing 250 to 350 g that were either healthy (N = 24) or made diabetic with alloxan (N = 24) to investigate the effect of alloxan-induced diabetes on the course of bone fracture healing. Histomorphometric analysis of the fracture site was performed at 7, 14, 25, and 35 days. After 7 days, diabetic rats had significantly less cartilage (P = 0.045) and greater fibrous connective (P = 0.006) tissue formation at the fracture site compared to controls. In contrast, marked callus formation was seen in diabetic rats with significant osteogenesis (P = 0.011, P = 0.010, P = 0.010, respectively, for 14, 25, and 35 days) and chondrogenesis (P = 0.028, P = 0.033, P = 0.019) compared to controls. Radiographic analysis revealed a displaced fracture with poor bone fragment alignment and delayed consolidation at these times in the diabetic group. The levels of alkaline phosphatase were significantly higher in diabetic rats at 25 days (P = 0.009). These results suggest that the initial excessive formation of fibrous connective tissue associated with delay in chondrogenesis and osteogenesis may not provide suitable stability of the fractured site, contributing to the inappropriate alignment of fragments and an increase in the volume of callus in later stages of repair. The resulting displaced fracture in diabetic rats requires long periods for remodeling and complete bone consolidation.

Um modelo evolucionário Norte-Sul

This work expands the classical Nelson and Winter model of Schumpeterian competition by including two sectors and a North-South dynamics, with a view to analyzing how different institutions and technological regimes affect the processes of convergence and divergence in the international economy. The results suggest that convergence may emerge out of the efforts for imitation in the South when the technological regime is cumulative. But when the regime is science-based, imitation is not enough for a successful catching-up. In this case convergence requires the South to invest in innovation as well. The work also analyses the robustness of the model results using Montecarlo techniques.

Complexité de la communication sur un canal avec délai

Nous introduisons un nouveau modèle de la communication à deux parties dans lequel nous nous intéressons au temps que prennent deux participants à effectuer une tâche à travers un canal avec délai d. Nous établissons quelques bornes supérieures et inférieures et comparons ce nouveau modèle aux modèles de communication classiques et quantiques étudiés dans la littérature. Nous montrons que la complexité de la communication d’une fonction sur un canal avec délai est bornée supérieurement par sa complexité de la communication modulo un facteur multiplicatif d/ lg d. Nous présentons ensuite quelques exemples de fonctions pour lesquelles une stratégie astucieuse se servant du temps mort confère un avantage sur une implémentation naïve d’un protocole de communication optimal en terme de complexité de la communication. Finalement, nous montrons qu’un canal avec délai permet de réaliser un échange de bit cryptographique, mais que, par lui-même, est insuffisant pour réaliser la primitive cryptographique de transfert équivoque.

Damage threshold determination of bulk polymer samples using pulsed photothermal deflection technique

Photothermal deflection technique was used for determining the laser damage threshold of polymer samples of teflon (PTFE) and nylon. The experiment was conducted using a Q-switched Nd-YAG laser operating at its fundamental wavelength (1-06μm, pulse width 10 nS FWHM) as irradiation source and a He-Ne laser as the probe beam, along with a position sensitive detector. The damage threshold values determined by photothermal deflection method were in good agreement with those determined by other methods.

A clear atomic example for the surface sensitivity of penning ionization

Using a crossed-beam apparatus with a double hemispherical electron spectrometer, we have studied the spectrum of electrons released in thermal energy ionizing collisions of metastable He^*(2^3S) atoms with ground state Yb(4f^14 6s^2 ^1S_0) atoms, thereby providing the first Penning electron spectrum of an atomic target with-4f-electrons. In contrast to the HeI (58.4nm) and NeI (73.6/74.4nm) photoelectron spectra of Yb, which show mainly 4f- and 6s-electron emission in about a 5:1 ratio, the He^*(2^3S) Penning electron spectrum is dominated by 6s-ionization, acoompnnied by some correlation- induced 6p-emission (8% Yb+( 4f^14 6p^2P) formation) and very little 4f-ionization (<_~ 2.5%). This astounding result is attributed to the electron exchange mechanism for He^*(2^3S) ionization and reflects the poor overlap of the target 4f-electron wavefunction with the 1s-hole of He^*(2^3S), as discussed on thc basis of Dirac-Fock wave functions for the Yb orbitals and through calculations of the partial ionization cross sections involving semiempirical complex potentiale. The presented case may be regarded as the elearest atomic example for the surface sensitivity of He^*(2^3S) Penning ionization observed so far.

Dinámica del anillo mitral en pacientes con insuficiencia mitral isquemica

OBJETIVOS: Describir y comparar los cambios dinámicos de la geometría del anillo mitral durante todo el ciclo cardiaco en pacientes con insuficiencia mitral isquémica y pacientes con válvula mitral normal. MATERIALES Y MÉTODOS: Los estudios ecocardiográficos analizados fueron 37, 23 con insuficiencia mitral isquémica y 14 con válvula mitral normal. La reconstrucción del anillo se realizó en la estación de trabajo Xcelera (Philips Medial Systems) mediante la herramienta de análisis mitral (MVQ), en 5 momentos del ciclo cardiaco: Comienzo de Sístole, Mitad de Sístole, Final de Sístole, Mitad de Diástole y Final de Diástole. RESULTADOS: El anillo del grupo control, fue más dinámico, con sus menores dimensiones al final de la diástole, presentando incremento progresivo durante la sístole. Los cambios en el perímetro y el área, fueron significativos entre el comienzo y mitad de la sístole (p:0.087 y p: 0.055). En el grupo con insuficiencia mitral isquémica, el anillo fue más estático. Todas las dimensiones en este grupo, fueron mayores en los cinco momentos del ciclo cardiaco. (p < 0.1). El anillo también fue más plano, con un índice morfológico anular menor al del grupo control (p:0.087). DISCUSIÓN Y CONCLUSIONES: En pacientes sin insuficiencia mitral, el anillo es una estructura dinámica. Durante la sístole, las menores dimensiones se produjeron al comienzo de este periodo y la conformación en silla de montar se mantuvo, protegiendo contra la insuficiencia mitral. El anillo del grupo con insuficiencia mitral fue más estático y plano, perdiendo los mecanismos protectores.

Efecto de la hipoxia-reoxigenación y las radiaciones ionizantes en la captación de glucosa en líneas tumorales de seno y colon cocultivadas con células endoteliales.

La captación de glucosa y su conversión en lactato juega un papel fundamental en el metabolismo tumoral, independientemente de la concentración de oxígeno presente en el tejido (efecto Warburg). Sin embrago, dicha captación varía de un tipo tumoral a otro, y dentro del mismo tumor, situación que podría depender de las características microambientales tumorales (fluctuaciones de oxígeno, presencia de otros tipos celulares) y de factores estresores asociados a los tratamientos. Se estudió el efecto de la hipoxia-reoxigenación (HR) y las radiaciones ionizantes (RI) sobre la captación de glucosa, en cultivos de líneas tumorales MCF-7 y HT-29, cultivadas de forma aislada o en cocultivo con la línea celular EAhy296. Se encontró que la captación de glucosa en HR es diferente para lo descrito en condiciones de hipoxia permanente y que es modificada en el cocultivo. Se identificaron poblaciones celulares dentro de la misma línea celular, de alta y baja captación de glucosa, lo que implicaría una simbiosis metabólica de la célula como respuesta adaptativa a las condiciones tumorales. Se evaluó la expresión de NRF2 y la translocación nuclear de NRF2 y HIF1a, como vías de respuesta a estrés celular e hipoxia. La translocación nuclear de las proteínas evaluadas explicaría el comportamiento metabólico de las células tumorales de seno, pero no de colon, por lo cual deben existir otras vías metabólicas implicadas. Las diferencias en el comportamiento de las células tumorales en HR en relación con hipoxia permitirá realizar planeaciones dosimétricas más dinámicas, que reevalúen las condiciones de oxigenación tumoral constantemente.

ControlFluid: un mercado variable

Las estrategias de una empresa en un mercado pequeño donde hay pocos compradores y muchos vendedores se vuelven el centro y punto clave de éxito, de lo contrario la empresa solo sigue una tendencia de mercado que al mediano plazo no resultara efectiva y terminan desapareciendo. Es por ello que las estrategias de mercado en las empresas se vuelven la característica diferenciadora permitiendo tomar ventaja del hacinamiento de un sector. Para que una empresa sea exitosa debe tener en cuenta sus ventajas competitivas y potencializarlas al máximo según las condiciones del mercado en el que se desempeña, ya sean estas de estructura, recursos o talento humano. El estudio de caso pretende abordar las dinámicas de un mercado específico con tendencias particulares que definen la forma de competir y las costumbres de sus principales actores. Estas mismas tendencias fijan los modelos de negocio en el sector, que desde diversos análisis como el PESTEL o puntos de vista de autores como Kotler (1992) y sus estrategias competitivas según la participación de mercado o Miller (1986) y sus definiciones de mercados o Porter (1980) con sus fuerzas de mercado, lo que permite dar una guía o explicación del porqué de las situaciones particulares del mercado en un sector tan especifico como el de automatización y control de calidad.

Urbanismo ambiental y evaluación estratégica

La tesis doctoral "Urbanismo Ambiental y Evaluación Estratégica" investiga y propone un renovado papel del urbanismo y muy especialmente de la ordenación del territorio como instrumentos no tan sólo de valor para la protección del medio ambiente sino también para la consecución de las políticas hacia un desarrollo sostenible. Con tal fín se reflexiona y potencia la visión/función del suelo como recurso ambiental, también en su función urbanística, y de su mano las consecuencias e interacciones que tal conceptuación puede tener en la Comunidad Europea desde su competencia compartida con los Estados Miembros en materia de medio ambiente, concretamente en su capacidad para incidir, mediante técnicas normativas y no normativas en el urbanismo y la ordenación del territorio en cuanto instrumentos de regulación y ordenación del recurso ambiental suelo. En esta nueva andadura del urbanismo ambientalizado o, si se prefiere, en la carrera hacia el desarrollo urbanístico sostenible, la técnica de evaluación ambiental estratégica de determinados planes y programas se revela como fundamental, especialmente si se consigue que su transposición a los ordenamientos internos de los Estados Miembros se lleve a cabo con pleno respeto a las notas insosyalables defendidas en la tesis de técnica preventiva y no reparativa, dinámica, con capacidad de incidencia en la elección misma del modelo de plan y con miras finalistas a la sostenibilidad. Con ella podrá generalizarse el urbanismo ambiental y acelerarse el proceso de revisión que tienen pendiente las materias de urbanismo y ordenación del territorio desde la nueva concepción del suelo como recurso ambiental y mediante la recepción e integración de los principios ambientalistas.