薇甘菊对其入侵地植物种子萌发和幼苗生长的化感影响

薇甘菊主要入侵我国华南的广东、海南和云南三省，给当地造成了严重的危害，其强烈的化感作用被认为是其成功入侵的原因之一。而目前对薇甘菊化感作用的研究还较少，因而对薇甘菊化感作用的认识还有待深入的研究。另外，在对入侵植物入侵群落进行恢复时，由于入侵植物的凋落物以及生长过的土壤都还含有化感物质，常常导致恢复难以继续。因而选择抗化感能力强的物种来恢复薇甘菊的入侵地也成为该研究的一个主题。本文以薇甘菊为实验材料来研究薇甘菊化感作用对植物种子活力、种子萌发和幼苗生长的影响，同时筛选化感抗性强的物种以进行薇甘菊入侵地的恢复工作。其主要结论如下： 1、薇甘菊根和叶的提取液对植物种子活力、种子萌发和幼苗生长都有很大的抑制作用，并且这种抑制作用随着提取液浓度的升高以及处理时间的延长而加强，这证明了薇甘菊具有很强的化感作用。 2、一些植物种子萌发和幼苗生长在低、中浓度提取液以及高浓度提取液的短时间的处理下能被促进，不过在高浓度的提取液以及长时间的处理下都被抑制，这说明化感作用是抑制还是促进作用在很大程度上受到提取液浓度和处理时间的影响。 3、薇甘菊提取液（50 g L-1）对紫薇(Lagerstroemia indica)、刺槐(Robinia pseudoacacia)、黑麦草(Lolium perenne)和西葫芦（Cucurbita pepo）种子处理50-100 h就能极大的影响到其后的种子萌发和幼苗生长，这说明薇甘菊在短时间（50-100 h）就能给植物产生极强的化感作用，也进一步证实薇甘菊很强的化感作用。 4、由于各物种进化历史的不同，而且各物种在对薇甘菊的化感抗性上也存在着差异，所以各物种对薇甘菊提取液的化感反应也各不相同。 5、薇甘菊根提取液对刺槐和紫薇幼苗根的生长的影响要大于叶提取液对刺槐和紫薇幼苗根的生长的影响，而对刺槐和紫薇种子萌发率、初始萌发时间、萌发速率以及幼苗株高的影响却是叶提取液的化感作用强。这支持了一个新的假设：由于物种间代谢的多样性，至少在根和叶对受试植物根的化感影响方面，对于一些物种来说根的化感作用可能强于叶的化感作用，对于另一些物种来说叶的化感作用可能强于根的化感作用。 6、薇甘菊叶提取液对西葫芦种子活力、种子萌发和幼苗生长的化感影响大，而对其后开花时间以及开花的数目没有明显的影响，这说明薇甘菊对西葫芦生活史前期的化感影响要大于对西葫芦生活史后期的化感影响。 7、薇甘菊叶的水提取液对种子萌发的抑制作用要大于对幼苗生长的抑制作用;对非豆科植物种子萌发的影响要大于对豆科植物种子萌发的影响，而对非豆科植物幼苗生长的影响要小于对豆科植物幼苗生长的影响;对本地种的抑制作用要大于对外来归化种的抑制作用。 本研究证实了薇甘菊强烈的化感作用，根提取液对受体植物幼根生长的影响大于叶提取液对受体植物幼根生长的影响，这种化感作用可能极大的促进了薇甘菊的入侵。另外，在恢复薇甘菊入侵群落时，考虑到薇甘菊的化感作用，理应选择外来的已经归化了的非豆科植物的幼苗。

榴绒粉蚧发生规律及其综合防治研究

：榴城粉蚧是云南蒙自石榴的主要害虫之一，1年发生4代．世代重叠。以成虫、若虫越冬。主要危害代第1，2代 成虫．若虫入果实萼筒中或果与果、果与叶片相接处取食危害，致果皮伤口并将干腐病茵侍入伤口处．果皮伤口经首 次连续降雨雨水浸泡溢出的汁液为干肩病菌提供了生长繁殖条件．谊虫是干腐病的媒介者。一般年份果园有虫株、 果率选85％～95％，75％～90％。采取综合防治后，有虫株、果率降为20％～25％，10％～15％。

石榴干腐病生物生态学及发生流行规律和治理研究

云南蒙自石榴干腐病助故阮以菌丝体和分生抢子在僵果、干 腐果及其他感病部位越冬。翌年经风雨、昆虫和人为活动在果园广为传播。石榴 花、幼果、果实期均可感病发病, 等筒花丝最易感病。果实发病率达一, 重者达一。采取综合治理措施, 其中重要的是在首次连续降雨前利去干 花丝、套袋和树冠多次喷清水, 提前水解、淡化干花丝、伤口渗出液的微酸性度, 可 控制该病的发生危害, 危害率由原来的一现降为一。

Abalone R&D at AQD

Details are given of the results of research conducted at the SEAFDEC Aquaculture Department on abalone (Haliotis asinina). The following areas are covered: reproductive biology; induced spawning; raising abalone in the hatchery; and, cage culture trials.

Tensile response of passivated films with climb-assisted dislocation glide

The tensile response of single crystal films passivated on two sides is analysed using climb enabled discrete dislocation plasticity. Plastic deformation is modelled through the motion of edge dislocations in an elastic solid with a lattice resistance to dislocation motion, dislocation nucleation, dislocation interaction with obstacles and dislocation annihilation incorporated through a set of constitutive rules. The dislocation motion in the films is by glide-only or by climb-assisted glide whereas in the surface passivation layers dislocation motion occurs by glide-only and penalized by a friction stress. For realistic values of the friction stress, the size dependence of the flow strength of the oxidised films was mainly a geometrical effect resulting from the fact that the ratio of the oxide layer thickness to film thickness increases with decreasing film thickness. However, if the passivation layer was modelled as impenetrable, i.e. an infinite friction stress, the plastic hardening rate of the films increases with decreasing film thickness even for geometrically self-similar specimens. This size dependence is an intrinsic material size effect that occurs because the dislocation pile-up lengths become on the order of the film thickness. Counter-intuitively, the films have a higher flow strength when dislocation motion is driven by climb-assisted glide compared to the case when dislocation motion is glide-only. This occurs because dislocation climb breaks up the dislocation pile-ups that aid dislocations to penetrate the passivation layers. The results also show that the Bauschinger effect in passivated thin films is stronger when dislocation motion is climb-assisted compared to films wherein dislocation motion is by glide-only. © 2012 Elsevier Ltd.

Characteristics of blood flow in microchannels and relevant impact on modelling blood behaviour in biochip separators

This paper reports a perspective investigation of computational modelling of blood fluid in microchannel devices as a preparation for future research on fluid-structure interaction (FSI) in biofluid mechanics. The investigation is carried out through two aspects, respectively on physical behaviours of blood flow in microchannels and appropriate methodology for modelling. The physics of blood flow is targeted to the challenges for describing blood flow in microchannels, including rheology of blood fluid, suspension features of red blood cells (RBCs), laminar hydrodynamic influence and effect of surface roughness. The analysis shows that due to the hyperelastic property of RBC and its comparable dimension with microchannels, blood fluid shows complex behaviours of two phase flow. The trajectory and migration of RBCs require accurate description of RBC deformation and interaction with plasma. Following on a discussion of modelling approaches, i.e. Eulerian method and Lagrangian method, the main stream modelling methods for multiphase flow are reviewed and their suitability to blood flow is analysed. It is concluded that the key issue for blood flow modelling is how to describe the suspended blood cells, modelled by Lagrangian method, and couple them with the based flow, modelled by Eulerian method. The multiphase flow methods are thereby classified based on the number of points required for describing a particle, as follows: (i) single-point particle methods, (ii) mutli-point particle methods, (iii) functional particle methods, and (iv) fluid particle methods. While single-point particle methods concentrate on particle dynamic movement, multipoint and functional particle methods can take into account particle mechanics and thus offer more detailed information for individual particles. Fluid particle methods provide good compromise between two phases, but require additional information for particle mechanics. For furthermore detailed description, we suggest to investigate the possibility using two domain coupling method, in which particles and base flow are modelled by two separated solvers. It is expected that this paper could clarify relevant issues in numerical modelling of blood flow in microchannels and induce some considerations for modelling blood flow using multiphase flow methods. © 2012 IEEE.

长吻和异育银鲫对玉米淀粉利用差异的比较研究

在同一实验条件下,通过8周生长实验比较研究了不同玉米淀粉含量的饲料对长吻和异育银鲫生长、饲料利用和鱼体组成的影响,以探讨肉食性和杂食性鱼类对玉米淀粉利用的差异。长吻的实验饲料是5种等氮等脂、玉米淀粉含量分别为0、5%、10%、15%和20%的半精制饲料。异育银鲫的实验饲料是5种等氮等脂、玉米淀粉含量分别为6%、12%、18%、24%和30%的半精制饲料。每天饱食投喂鱼两次。实验结果表明:对于长吻,玉米淀粉含量为5%和10%饲料组的特定生长率显著高于另外3组(Duncan s多重比较,P<0.05)。

Improving photosynthesis of microalgae by changing the ratio of light-harvesting pigments

Changing the ratio of light-harvesting pigments was regarded as an efficient way to improve the photosynthesis rate in microalgae, but the underlying mechanism is still unclear. In the present study, a mutant of Anabeana simensis (called SP) was selected from retrieved satellite cultures. Several parameters related with photosynthesis, such as the growth, photosynthesis rate, the content of photosynthetic pigment, low temperature fluorescence spectrum (77K) and electron transport rate, were compared with those of the wild type. It was found that the change in the ratio of light-harvesting pigments in the mutant led to more efficient light energy transfer and usage in mutant than in the wild type. This may be the reason why the mutant had higher photosynthesis and growth rates.

Ultrathin FBG pressure sensor with enhanced responsivity

An ultrathin fiber Bragg grating pressure sensor with enhanced sensitivity is demonstrated. A novel piston-like diaphragm with a hard core in the center is used as the sensing element to enhance the responsivity. Both the theoretical analysis and the experimental results show that the Young's modulus of the diaphragm and the radius of the hard core have significant effect on the pressure responsivity. By optimizing these two parameters, a pressure responsivity of 7 nm/MPa has been achieved.

Study on optical properties of Er/Er+O doped GaN thin films

We extend the use of Raman spectroscopy to investigate the modes of Er-implanted and Er + O co-implanted GaN, and discuss the influence of O ions on Er3+ -related infrared photoluminescence (PL). It is found that Er3+ implantation introduces new Raman peaks in Raman spectra at frequencies 300 and 670 cm and one additional new peak at 360cm is introduced after Er + O implantation. It is proposed that the broad structure around 300 cm(-1) mode originates from disorder-activated scattering (DARS). The Raman peak at 670 cm is assigned to nitrogen vacancy related defects. The 360 cm peak is attributed to the O implantation induced defect complexes (vacancies, interstitial, or anti-sites in the host). The appearance of the 360 cm(-1) mode results in the decrease of the Er3+ -related infrared PL of GaN: Er + O.

一种面向异构实时集群系统的使用率反馈控制方法

软实时系统有着广泛的应用,如在线游戏、股票交易、传感器网络数据处理等.在这类应用中,通常有多个服务节点来响应外界大量的软实时请求.为了保证服务质量及防止系统超载,这些节点的CPU需要满足一定的使用率限制.为此,首先提出了异构集群系统中基于负载平衡的CPU使用率动态模型,其次在算法设计上将反馈控制理论引入其中并提出了针对异构实时集群系统的基于反馈的使用率控制算法.实验结果证明,该算法在引入负载平衡机制的异构实时集群系统中运行良好,系统节点间负载均衡并且各节点的CPU使用率能稳定地运行在限定状态.