Understanding key mechanism by which internal communication influences prosocial service behaviors of front-line employees

This paper contributes to the prosocial service behavior (PSB) literature by investigating the nature of the relationships between internal communication and PSBs, and whether role stress and organizational commitment mediate these relationships. According to the literature, internal communication plays an important role in influencing FLEs job attitudes and behaviors, as well as reducing role stress. Data collected from FLEs in a UK based service organization was used to test our conceptual framework. The results show that FLE perceptions of internal communication practices influence their role stress and organizational commitment, which, in turn, affect the performance of PSBs. Our findings highlight the significance of studying role stress and organizational commitment as mediators in the relationship between internal communication and PSBs, and shed light on the mechanisms by which internal communication influences PSBs. The limitations of the study are then sketched, and suggestions for future research are also made.

Reliability estimation of second life battery system power electronic topologies for grid frequency response applications

This paper is part of a project which aims to research the opportunities for the re-use of batteries after their primary use in low and ultra low carbon vehicles on the electricity grid system. One potential revenue stream is to provide primary/secondary/high frequency response to National Grid through market mechanisms via DNO's or Energy service providers. Some commercial battery energy storage systems (BESS) already exist on the grid system, but these tend to use costly new or high performance batteries. Second life batteries should be available at lower cost than new batteries but reliability becomes an important issue as individual batteries may suffer from degraded performance or failure. Therefore converter topology design could be used to influence the overall system reliability. A detailed reliability calculation of different single phase battery-to-grid converter interfacing schemes is presented. A suitable converter topology for robust and reliable BESS is recommended.

Distributed Visualization Systems in Remote Sensing Data Processing Grid

Implementation of GEOSS/GMES initiative requires creation and integration of service providers, most of which provide geospatial data output from Grid system to interactive user. In this paper approaches of DOS- centers (service providers) integration used in Ukrainian segment of GEOSS/GMES will be considered and template solutions for geospatial data visualization subsystems will be suggested. Developed patterns are implemented in DOS center of Space Research Institute of National Academy of Science of Ukraine and National Space Agency of Ukraine (NASU-NSAU).

Grid-enabling Satellite Image Archive Prototype for UA Space Grid Testbed

* The work is partially supported by the grant of National Academy of Science of Ukraine for the support of scientific researches by young scientists No 24-7/05, " Розробка Desktop Grid-системи і оптимізація її продуктивності ”.

Grid Approach to Satellite Monitoring Systems Integration

This paper highlights the challenges of satellite monitoring systems integration, in particular based on Grid platform, and reviews possible solutions for these problems. We describe integration issues on different levels: data integration level and task management level (job submission in terms of Grid). We show example of described technologies for integration of monitoring systems of Ukraine (National Space Agency of Ukraine, NASU) and Russia (Space Research Institute RAS, IKI RAN). Another example refers to the development of InterGrid infrastructure that integrates several regional and national Grid systems: Ukrainian Academician Grid (with Satellite data processing Grid segment) and RSGS Grid (Chinese Academy of Sciences).

Do managerial strategies influence service behaviours? Insights from a qualitative study

Based on a review of the extant literature, a conceptual framework for analyzing the associations between managerial strategies (internal communications, empowerment, supportive leadership and professional development), employee job attitudes (organizational commitment and job satisfaction) and prosocial service behaviours (PSBs) is developed. The authors explore the relevance of the proposed conceptual model and testable propositions regarding the associations between managerial strategies, employee attitudes and PSBs by conducting in-depth interviews of FLEs in a travel service organization. Based on the findings of the in-depth interviews, the relationships between managerial strategies, job attitudes and PSBs in the conceptual framework are largely supported.

3D TerraFly: Quality of service management for online interactive 3D geographic information system

3D geographic information system (GIS) is data and computation intensive in nature. Internet users are usually equipped with low-end personal computers and network connections of limited bandwidth. Data reduction and performance optimization techniques are of critical importance in quality of service (QoS) management for online 3D GIS. In this research, QoS management issues regarding distributed 3D GIS presentation were studied to develop 3D TerraFly, an interactive 3D GIS that supports high quality online terrain visualization and navigation. ^ To tackle the QoS management challenges, multi-resolution rendering model, adaptive level of detail (LOD) control and mesh simplification algorithms were proposed to effectively reduce the terrain model complexity. The rendering model is adaptively decomposed into sub-regions of up-to-three detail levels according to viewing distance and other dynamic quality measurements. The mesh simplification algorithm was designed as a hybrid algorithm that combines edge straightening and quad-tree compression to reduce the mesh complexity by removing geometrically redundant vertices. The main advantage of this mesh simplification algorithm is that grid mesh can be directly processed in parallel without triangulation overhead. Algorithms facilitating remote accessing and distributed processing of volumetric GIS data, such as data replication, directory service, request scheduling, predictive data retrieving and caching were also proposed. ^ A prototype of the proposed 3D TerraFly implemented in this research demonstrates the effectiveness of our proposed QoS management framework in handling interactive online 3D GIS. The system implementation details and future directions of this research are also addressed in this thesis. ^

Enabling adaptability in service aggregates using transparent shaping techniques

Distributed applications are exposed as reusable components that are dynamically discovered and integrated to create new applications. These new applications, in the form of aggregate services, are vulnerable to failure due to the autonomous and distributed nature of their integrated components. This vulnerability creates the need for adaptability in aggregate services. The need for adaptation is accentuated for complex long-running applications as is found in scientific Grid computing, where distributed computing nodes may participate to solve computation and data-intensive problems. Such applications integrate services for coordinated problem solving in areas such as Bioinformatics. For such applications, when a constituent service fails, the application fails, even though there are other nodes that can substitute for the failed service. This concern is not addressed in the specification of high-level composition languages such as that of the Business Process Execution Language (BPEL). We propose an approach to transparently autonomizing existing BPEL processes in order to make them modifiable at runtime and more resilient to the failures in their execution environment. By transparent introduction of adaptive behavior, adaptation preserves the original business logic of the aggregate service and does not tangle the code for adaptive behavior with that of the aggregate service. The major contributions of this dissertation are: first, we assessed the effectiveness of BPEL language support in developing adaptive mechanisms. As a result, we identified the strengths and limitations of BPEL and came up with strategies to address those limitations. Second, we developed a technique to enhance existing BPEL processes transparently in order to support dynamic adaptation. We proposed a framework which uses transparent shaping and generative programming to make BPEL processes adaptive. Third, we developed a technique to dynamically discover and bind to substitute services. Our technique was evaluated and the result showed that dynamic utilization of components improves the flexibility of adaptive BPEL processes. Fourth, we developed an extensible policy-based technique to specify how to handle exceptional behavior. We developed a generic component that introduces adaptive behavior for multiple BPEL processes. Fifth, we identify ways to apply our work to facilitate adaptability in composite Grid services.

Analytical approximations to predict performance measures of manufacturing systems with job failures and parallel processing

Parallel processing is prevalent in many manufacturing and service systems. Many manufactured products are built and assembled from several components fabricated in parallel lines. An example of this manufacturing system configuration is observed at a manufacturing facility equipped to assemble and test web servers. Characteristics of a typical web server assembly line are: multiple products, job circulation, and paralleling processing. The primary objective of this research was to develop analytical approximations to predict performance measures of manufacturing systems with job failures and parallel processing. The analytical formulations extend previous queueing models used in assembly manufacturing systems in that they can handle serial and different configurations of paralleling processing with multiple product classes, and job circulation due to random part failures. In addition, appropriate correction terms via regression analysis were added to the approximations in order to minimize the gap in the error between the analytical approximation and the simulation models. Markovian and general type manufacturing systems, with multiple product classes, job circulation due to failures, and fork and join systems to model parallel processing were studied. In the Markovian and general case, the approximations without correction terms performed quite well for one and two product problem instances. However, it was observed that the flow time error increased as the number of products and net traffic intensity increased. Therefore, correction terms for single and fork-join stations were developed via regression analysis to deal with more than two products. The numerical comparisons showed that the approximations perform remarkably well when the corrections factors were used in the approximations. In general, the average flow time error was reduced from 38.19% to 5.59% in the Markovian case, and from 26.39% to 7.23% in the general case. All the equations stated in the analytical formulations were implemented as a set of Matlab scripts. By using this set, operations managers of web server assembly lines, manufacturing or other service systems with similar characteristics can estimate different system performance measures, and make judicious decisions - especially setting delivery due dates, capacity planning, and bottleneck mitigation, among others.

Take the "Con" Out of Consulting in the Food Service Industry

Consultants can help a food service operator with almost any problem which needs solving. Howeve6 the manager must "manage" the consultant. The author offers a design for planning for hiring and evaluating the work of anyone given the job of analyzing existing systems and diagnosing problems.

Correlates of Non-Institutional Food Service Turnover

The high rate of restaurant employee turnover, particularly of the non-supervisory employee, is a continuing problem. The authors assess the possible correlates of this turnover and their relative strengths, ranking and comparing working hours, quality of supervision, chance for promotion, on-the-job training, pay, work of others, employees' attitudes, and management's interest in employees to present possible solutions for the high rate of turnover.

Recreational Food Service: A Growing Employment Option

The recreational food service industry represents a wealth of potential job opportunities for graduates of hospitality management degree programs. Most hospitality management curricula are saturated with core courses and basic hospitality education course work, leaving little room for additional components. Recreational food service, however, could be easily integrated into an existing pro- gram and made available for students interested in this growing employment option. The author presents one option as a model curriculum approach.

The Food Service Industry: Beliefs Held by Academics

In his study - The Food Service Industry: Beliefs Held by Academics - by Jack Ninemeier, Associate Professor, School of Hotel, Restaurant and Institutional Management at Michigan State University, Associate Professor Ninemeier initially describes his study this way: “Those in the academic sector exert a great deal of influence on those they are training to enter the food service industry. One author surveyed educational institutions across the country to ascertain attitudes of teachers toward various segments of the industry.” Those essential segments of the industry serve as the underpinnings of this discussion and are four-fold. They are lodging, institutional, multi-unit, and single-unit properties. For each segment the analysis addressed factors relating to Marketing, management and operating concerns: Marketing, operations, fiscal management, innovation, future of the segment Employee-related concerns: quality of work life, training/education opportunities, career opportunities The study uses a survey of academicians as a guide; they point to segments of the food service industry students might be inclined to enter, or even ignore. The survey was done via a questionnaire sent from the campus of the School of Hotel, Restaurant and Institutional Management at Michigan State University to 1850 full-time faculty members in two and four-year hospitality programs in the United States. Through the survey, Ninemeier wishes to reasonably address specific problems now confronting the food service industry. Those problems include but are not limited to: reducing employee turnover, retaining staff, increasing productivity and revenue, and attracting new staff. “Teachers in these programs are, therefore, an important plank in industry's platform designed to recruit students with appropriate background knowledge and interest in their operations,” Ninemeier says. Your author actually illustrates the survey results, in table form. The importance to an employee, of tangibles and intangibles such as morale, ego/esteem, wages, and benefits are each explored through the survey. According to the study, an interesting dichotomy exists in the institutional property element. Although, beliefs the academics hold about the institutional element suggest that it offers low job stress, attractive working conditions, and non-demanding competitive pressures, the survey and Ninemeier also observe: “Academics do not believe that many of their graduates will enter the institutional segment.” “If academic beliefs are incorrect, an educational program to educate academics about management and employee opportunities in the segment may be in order,” Ninemeier waxes philosophically.

Effects of computer self efficacy and positive mood in business -to -business service encounters

Attempts to improve the level of customer service delivered have resulted in an increased use of technology in the customer service environment. Customer-contact employees are expected to use computers to help them in providing better service encounters for customers. This research study done in a business-to-business environment explored the effects of customer-contact employees' computer self efficacy and positive mood on in-role customer service, extra-role customer service and organization citizenship. It also examined the relationship of customer service to customer satisfaction and customer delight. ^ Research questions were analyzed using descriptive statistics, frequency distributions, correlation analysis, and regression analysis. Results indicated that computer self efficacy had a greater impact on extra-role customer service than it did on in-role customer service. Positive mood had a positive moderating influence on extra-role customer service but not on in-role customer service. ^ There was a significant relationship between in-role customer service and customer satisfaction but not between extra-role customer service and customer satisfaction. There was no significant relationship between in-role customer service and customer delight nor between extra-role customer service and customer delight. There was a statistically greater positive relationship between joy experienced by clients and customer delight than between pleasant surprise and customer delight. ^ This study demonstrated the importance of facilitating customer-contact employee positive mood on the job in order to improve the level of extra-role customer service delivered. It also showed that increasing the level of customer service does not necessarily lead to higher levels of customer satisfaction. ^

Interoperable resource brokering with policy-based provisioning and job allocation

The increasing needs for computational power in areas such as weather simulation, genomics or Internet applications have led to sharing of geographically distributed and heterogeneous resources from commercial data centers and scientific institutions. Research in the areas of utility, grid and cloud computing, together with improvements in network and hardware virtualization has resulted in methods to locate and use resources to rapidly provision virtual environments in a flexible manner, while lowering costs for consumers and providers. ^ However, there is still a lack of methodologies to enable efficient and seamless sharing of resources among institutions. In this work, we concentrate in the problem of executing parallel scientific applications across distributed resources belonging to separate organizations. Our approach can be divided in three main points. First, we define and implement an interoperable grid protocol to distribute job workloads among partners with different middleware and execution resources. Second, we research and implement different policies for virtual resource provisioning and job-to-resource allocation, taking advantage of their cooperation to improve execution cost and performance. Third, we explore the consequences of on-demand provisioning and allocation in the problem of site-selection for the execution of parallel workloads, and propose new strategies to reduce job slowdown and overall cost.^