Information and appearance - design creating value for wearable technology items in B2C markets

The objective of the thesis is to study the role of design in adding value for wearable technology (WT) items in B2C markets by applying previous value creation literature to the subject. The thesis investigates value creation through types of value perceived by the customer being functional/instrumental, experiential/hedonic, symbolic/expressive and cost/sacrifice. The data was collected in face-to-face interviews with both consumers and industry experts. The results suggest that value perceived by both experts and consumers in every end-user category was elementarily functional, however, design was considered to bring most added value to WT in the categories of health and medicine, infotainment, and fashion. Also, WT ought to have same characteristics as regular clothing in order to attract mass markets. The results of the study suggest that companies should invest in design in order to gain long-term user engagement.

Elinkaarihankkeen rakennusliikeriskit

Tiivistelmä: Elinkaaren palvelumallit ovat suosittuja julkisten palveluiden hankintamuotoja Iso-Britanniassa. PPP–malli on yksi monista julkisten palvelujen kumppanuusmalleista, josta on tullut joissakin kunnissa yhä suositumpi hankintamalli myös Suomessa. Tämä on seurausta kuntien tiukasta taloustilanteesta, jossa PPP–hankkeen katsotaan mahdollistavan julkisen sektorin investoinnit joutumatta leikkaamaan muita pakollisia hankintoja. Kuitenkin koko elinkaaren kattavat palvelutarjonnan hankintamallit ovat vielä melko uusia malleja ja meillä on tarve löytää toimivia sopimusmalleja ja käytäntöjä, jotta hankkeista saadaan rakennusliikettä kiinnostavia liiketoimintamalleja. Ulkomailla elinkaarihankkeista on tehty monia tutkimuksia ja konsultit ovat kääntäneet niitä omiin tarkoituksiinsa sopiviksi. Kuitenkin Suomen lainsäädäntö on erilainen julkisten palveluiden tuottamisessa, erityisesti lakisääteisissä terveydenhuoltopalveluissa, vesi- ja jätevesihuollossa, vankeinhoidossa, ja niin edelleen. Tästä näkökulmasta ulkomailla tehdyt tutkimukset eivät sellaisenaan sovi Suomeen käytettäviksi. Esimerkiksi tutkimuksissa esitetään, että elinkaarihankkeet tuottavat pitkän aikavälin kassavirtaan, mutta tämä etu koskee vain rahoittaja ja kiinteistöpalvelu yrityksiä - ei rakennusyritystä. Tutkimuksissa mainitaan myös muista elinkaarihankkeiden mahdollisuuksista, jotka jäävät kuitenkin rakennusliikkeen näkökulmasta epäselviksi. Perinteisiin rakennuttamisen malleihin verrattuna elinkaarihankkeiden sopimusmenettelyt ovat monimutkaisempia sekä aikaa vievempiä ja sopijaosapuolten yhteistyö elinkaarihankkeissa on välttämätöntä. Käytännössä elinkaarihankkeiden riskienjako nähdään julkisen sektorin ja yksityisen sektorin välillä yksipuoliseksi. Jotta elinkaarimalli yleistyisi Suomessa, niin elinkaarisopimuksen riskienjaosta on tehtävä tasapuolinen ja käyttäjä pitää saada myös riskejä kantamaan. Tässä työssä keskitytään arvioimaan elinkaarimallien keskeisiä menestystekijöitä ja riskitekijöitä ja löytää mahdollisia tapoja tehdä hankintaprosessista helppoa ja sujuvaa. Samalla yritetään selvittää, miten elinkaarihankkeesta saadaan rakennusliikkeen kannalta menestyvää liiketoimintaa. Johtopäätökset perustuvat aikaisempiin tutkimuksiin ja empiiriseen tapaustutkimukseen. Työssä arvioidaan niitä seikkoja, jotka vaikuttavat yksityisen sektorin tarjouspäätökseen. Arvioinnissa erotetaan toisistaan kolme erillistä riskitekijää; tarjouksen tekemisen riskit, rakennushankkeen riskit ja elinkaaren aikaiset riskit. Työssä todetaan, että aikaisemmat tutkimukset ovat riittämättömiä rakennusliikkeen riskien arvioimiseen.

ORCID for DSpace

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Käyttäjäkokemuksen määrittelyn erot eri käyttäjäryhmien ja kehittäjien välillä sekä niiden merkitys

Usein käyttäjäkokemuksella (user experience, UX) kuvataan tuotteen tai palvelun synnyttämiä tunteita ja kokemuksia. Vaikka UX on yleisesti tunnettu termi ja tärkeä tekijä menestyvän tuotteen luomisessa, ei yhtenäistä määritelmää sille ole muodostunut. Kun suunnittelija, ohjelmistotuottaja ja loppukäyttäjä käsittävät sen eri tavoin, ei tuote vastaa loppukäyttäjän vaatimuksia. Ongelman ratkaisemiseksi laaditaan kysely lukiolaisille ja tuloksia verrataan aikaisempiin tuloksiin, jossa vastaajina olivat yliopisto-opiskelijat ja UX-ammattilaiset. Tulosten perusteella lukiolaiset määrittelevät UX:n hyvin laaja-alaisesti ja sisällyttävät siihen lähes kaikki käyttöön liittyvät asiat. Heille tärkeintä ovat tuotteen konkreettiset ominaisuudet, kuten toimivuus ja luotettavuus. Koska UX merkitsee niin monia asioita loppukäyttäjille, suunnittelijoiden tulisi keskittyä käyttäjäkokemuksen luomiseen sen määrittelemisen sijaan. Oikea käyttäjäkokemus oikealle käyttäjälle.

Power Electronic Converters in Low-Voltage Direct Current Distribution – Analysis and Implementation

Over the recent years, smart grids have received great public attention. Many proposed functionalities rely on power electronics, which play a key role in the smart grid, together with the communication network. However, “smartness” is not the driver that alone motivates the research towards distribution networks based on power electronics; the network vulnerability to natural hazards has resulted in tightening requirements for the supply security, set both by electricity end-users and authorities. Because of the favorable price development and advancements in the field, direct current (DC) distribution has become an attractive alternative for distribution networks. In this doctoral dissertation, power electronic converters for a low-voltage DC (LVDC) distribution system are investigated. These include the rectifier located at the beginning of the LVDC network and the customer-end inverter (CEI) on the customer premises. Rectifier topologies are introduced, and according to the LVDC system requirements, topologies are chosen for the analysis. Similarly, suitable CEI topologies are addressed and selected for study. Application of power electronics into electricity distribution poses some new challenges. Because the electricity end-user is supplied with the CEI, it is responsible for the end-user voltage quality, but it also has to be able to supply adequate current in all operating conditions, including a short-circuit, to ensure the electrical safety. Supplying short-circuit current with power electronics requires additional measures, and therefore, the short-circuit behavior is described and methods to overcome the high-current supply to the fault are proposed. Power electronic converters also produce common-mode (CM) and radio-frequency (RF) electromagnetic interferences (EMI), which are not present in AC distribution. Hence, their magnitudes are investigated. To enable comprehensive research on the LVDC distribution field, a research site was built into a public low-voltage distribution network. The implementation was a joint task by the LVDC research team of Lappeenranta University of Technology and a power company Suur-Savon S¨ahk¨o Oy. Now, the measurements could be conducted in an actual environment. This is important especially for the EMI studies. The main results of the work concern the short-circuit operation of the CEI and the EMI issues. The applicability of the power electronic converters to electricity distribution is demonstrated, and suggestions for future research are proposed.

Verkkopalveluiden jatkuvan ylläpidon kehittäminen: Case Aucor Oy ja WordPress

Verkkopalveluiden ylläpitovaiheessa halutaan varmistua, etteivät palveluun tehdyt muutokset aiheuta verkkopalvelussa virhetilanteita ja palvelu toimii moitteetta. Muutoksen hyväksyntätestaus voidaan tehdä regressiotestauksena vertaamalla palvelun tilaa ennen ja jälkeen muutoksen. Sisältöpainotteisessa verkkopalvelussa testaaminen keskittyy loppukäyttäjälle esitetyn sivun semanttiseen sekä visuaaliseen oikeellisuuteen sekä erilaisiin toiminnallisiin testeihin. Työssä tarkastellaan etenkin suositulla WordPress-julkaisujärjestelmällä toteutettujen verkkopalveluiden ylläpitoa. Keskeisenä osana julkaisujärjestelmillä toteutettujen verkkopalveluiden ylläpitoa on julkaisujärjestelmän ja sitä täydentävien lisäosien päivittämistä ajantasaisiin versioihin. Nämä päivitykset paitsi tuovat uusia ominaisuuksia verkkopalvelun kehittäjille, myös paikkaavat järjestelmän tietoturvahaavoittuvuuksia sekä korjaavat aiemmissa versioissa esiintyneitä virheitä. Tässä työssä kehitettiin kohdeyrityksen aiempia verkkopalveluiden ylläpitoprosesseja niissä tunnistettujen kehityskohteiden perusteella. Uudistettu kokonaisuus jakautuu kahteen kokonaisuuteen: päivitystarpeen seurantaan sekä päivitysten tekemiseen. Päivitystarpeen seurantaa varten kehitettiin uusi työkalu helpottamaan kokonaiskuvan hahmottamista. Päivitysten tekemisen osalta työssä keskityttiin automatisoidun regressiotestauksen kehittämiseen, missä tärkeimpänä testauskeinona käytetään verkkopalvelusta tallennettujen kuvankaappausten vertailuun perustuvaa visuaalista testausta. Uusien ylläpitoprosesseille määriteltiin myös seurannan kohteet uudistuksen onnistumisen ja jatkokehityksen arviointia varten.

Spare Part Management of Bubbling Fluidized Bed Boiler

Energy generation industry is very capital-intensive industry. Productivity and availability requirements have increased while competition and quality requirement have increased. Maintenance has a significant role that these requirements can be reached. Even maintenance is much more than repairing faults nowadays, spare parts are important part of maintenance. Large power boilers are user-specific therefore features of boilers vary from project to project. Equipment have been designed to follow the customer’s requirements therefore spare parts are mainly user-specific also. The study starts with literature review introducing maintenance, failure mechanisms, and systems and equipment of bubbling fluidized bed boiler. At the final part spare part management is discussed from boiler technology point of view. For this part of the study science publications about spare part management are utilized also some specialist from a boiler technology company and other original equipment manufacturers were interviewed. Spare part management is challenging from the boiler supplier point of view and the end user of spare parts has a responsibility of stocking items. Criticality analysis can be used for finding most critical devices of the process and spare part management shall focus to those items. Spare parts are part of risk management. Stocking spare parts is increasing costs but then high spare part availability is decreasing delay time caused by fault of item.

Master Plan for Renewable Energy based Electricity Generation in The Gambia

The principal objective of this paper is to develop a methodology for the formulation of a master plan for renewable energy based electricity generation in The Gambia, Africa. Such a master plan aims to develop and promote renewable sources of energy as an alternative to conventional forms of energy for generating electricity in the country. A tailor-made methodology for the preparation of a 20-year renewable energy master plan focussed on electricity generation is proposed in order to be followed and verified throughout the present dissertation, as it is applied for The Gambia. The main input data for the proposed master plan are (i) energy demand analysis and forecast over 20 years and (ii) resource assessment for different renewable energy alternatives including their related power supply options. The energy demand forecast is based on a mix between Top-Down and Bottom-Up methodologies. The results are important data for future requirements of (primary) energy sources. The electricity forecast is separated in projections at sent-out level and at end-user level. On the supply side, Solar, Wind and Biomass, as sources of energy, are investigated in terms of technical potential and economic benefits for The Gambia. Other criteria i.e. environmental and social are not considered in the evaluation. Diverse supply options are proposed and technically designed based on the assessed renewable energy potential. This process includes the evaluation of the different available conversion technologies and finalizes with the dimensioning of power supply solutions, taking into consideration technologies which are applicable and appropriate under the special conditions of The Gambia. The balance of these two input data (demand and supply) gives a quantitative indication of the substitution potential of renewable energy generation alternatives in primarily fossil-fuel-based electricity generation systems, as well as fuel savings due to the deployment of renewable resources. Afterwards, the identified renewable energy supply options are ranked according to the outcomes of an economic analysis. Based on this ranking, and other considerations, a 20-year investment plan, broken down into five-year investment periods, is prepared and consists of individual renewable energy projects for electricity generation. These projects included basically on-grid renewable energy applications. Finally, a priority project from the master plan portfolio is selected for further deeper analysis. Since solar PV is the most relevant proposed technology, a PV power plant integrated to the fossil-fuel powered main electrical system in The Gambia is considered as priority project. This project is analysed by economic competitiveness under the current conditions in addition to sensitivity analysis with regard to oil and new-technology market conditions in the future.

Twitter en Colombia: ¿Cómo lo están usando las cadenas radiales para informar?

En Colombia los medios de comunicación, más específicamente las cadenas radiales nacionales más importantes, no se han quedado atrás y han optado por unirse desde hace unos años a twitter, incursionando sobre la marcha. Las cuentas de twitter de Bluradio, Caracol Radio y RCN Radio analizadas junto a las entrevistas con los encargados de las mismas y las emisiones de los programas de noticias escogidos, muestran que las redes sociales siguen siendo un desafío en la actualidad. Uno de esos desafíos es encontrar el verdadero objetivo de los medios en twitter y que este no sólo consista en la escucha activa en busca de las noticias de último momento. Para alcanzar una legitimidad comunicativa en la web 2.0 es necesario adaptarse a la cultura de la participación de las redes, de lo contrario se está condenado a obtener tan solo un nuevo canal de difusión de noticias.

gvSIG Mini y Phone Cache

gvSIG Mini es una aplicación open-source de usuario final cliente móvil de Infraestructura de Datos Espaciales IDEs con licencia GNU/ GPL, diseñada para teléfonos móviles Java y Android que permite la visualización y navegación sobre cartografía digital estructurada en tiles procedente de servicios web OGC como WMS(-C) y de servicios como OpenStreetMap (OSM), Yahoo Maps, Maps Bing, así como el almacenamiento en caché para reducir al mínimo el ancho de banda. gvSIG Mini puede acceder a servicios geoespaciales como NameFinder, para la búsqueda de puntos de interés y YOURS (Yet Another OpenStreetMap Routing Service) para el cálculo de rutas y la renderización de la información vectorial el lado del cliente. Por otra parte, gvSIG Mini también ofrece servicio de localización GPS. La versión de gvSIG Mini para Android, posee algunas características adicionales como son el soporte de localización Android o el uso del lacelerómetro para centrado. Esta versión también hace uso de servicios como son la predicción del tiempo o TweetMe que permite compartir una localización utilizando el popular servicio social Twitter. gvSIG Mini es una aplicación que puede ser descargada y usada libremente, convirtiéndose en una plataforma para el desarrollo de nuevas soluciones y aplicaciones en el campo de Location Based Services (LBS). gvSIG Mini ha sido desarrollado por Prodevelop, S.L. No es un proyecto oficial de gvSIG, pero se une a la familia a través del catálogo de extensiones no oficiales de gvSIG. Phone Cache es una extensión que funciona sobre gvSIG 1.1.2 que permite generar una caché, para poder utilizar gvSIG Mini para Java en modo desconectado

Exploiting CAFS-ISP

In the summer of 1982, the ICLCUA CAFS Special Interest Group defined three subject areas for working party activity. These were: 1) interfaces with compilers and databases, 2) end-user language facilities and display methods, and 3) text-handling and office automation. The CAFS SIG convened one working party to address the first subject with the following terms of reference: 1) review facilities and map requirements onto them, 2) "Database or CAFS" or "Database on CAFS", 3) training needs for users to bridge to new techniques, and 4) repair specifications to cover gaps in software. The working party interpreted the topic broadly as the data processing professional's, rather than the end-user's, view of and relationship with CAFS. This report is the result of the working party's activities. The report content for good reasons exceeds the terms of reference in their strictest sense. For example, we examine QUERYMASTER, which is deemed to be an end-user tool by ICL, from both the DP and end-user perspectives. First, this is the only interface to CAFS in the current SV201. Secondly, it is necessary for the DP department to understand the end-user's interface to CAFS. Thirdly, the other subjects have not yet been addressed by other active working parties.

Towards natural human computer interaction in BCI

BCI systems require correct classification of signals interpreted from the brain for useful operation. To this end this paper investigates a method proposed in [1] to correctly classify a series of images presented to a group of subjects in [2]. We show that it is possible to use the proposed methods to correctly recognise the original stimuli presented to a subject from analysis of their EEG. Additionally we use a verification set to show that the trained classification method can be applied to a different set of data. We go on to investigate the issue of invariance in EEG signals. That is, the brain representation of similar stimuli is recognisable across different subjects. Finally we consider the usefulness of the methods investigated towards an improved BCI system and discuss how it could potentially lead to great improvements in the ease of use for the end user by offering an alternative, more intuitive control based mode of operation.

Ocean data dissemination: new challenges for data integration

In the decade since OceanObs `99, great advances have been made in the field of ocean data dissemination. The use of Internet technologies has transformed the landscape: users can now find, evaluate and access data rapidly and securely using only a web browser. This paper describes the current state of the art in dissemination methods for ocean data, focussing particularly on ocean observations from in situ and remote sensing platforms. We discuss current efforts being made to improve the consistency of delivered data and to increase the potential for automated integration of diverse datasets. An important recent development is the adoption of open standards from the Geographic Information Systems community; we discuss the current impact of these new technologies and their future potential. We conclude that new approaches will indeed be necessary to exchange data more effectively and forge links between communities, but these approaches must be evaluated critically through practical tests, and existing ocean data exchange technologies must be used to their best advantage. Investment in key technology components, cross-community pilot projects and the enhancement of end-user software tools will be required in order to assess and demonstrate the value of any new technology.

The transformation of earth-system observations into information of socio-economic value in GEOSS

The Group on Earth Observations System of Systems, GEOSS, is a co-ordinated initiative by many nations to address the needs for earth-system information expressed by the 2002 World Summit on Sustainable Development. We discuss the role of earth-system modelling and data assimilation in transforming earth-system observations into the predictive and status-assessment products required by GEOSS, across many areas of socio-economic interest. First we review recent gains in the predictive skill of operational global earth-system models, on time-scales of days to several seasons. We then discuss recent work to develop from the global predictions a diverse set of end-user applications which can meet GEOSS requirements for information of socio-economic benefit; examples include forecasts of coastal storm surges, floods in large river basins, seasonal crop yield forecasts and seasonal lead-time alerts for malaria epidemics. We note ongoing efforts to extend operational earth-system modelling and assimilation capabilities to atmospheric composition, in support of improved services for air-quality forecasts and for treaty assessment. We next sketch likely GEOSS observational requirements in the coming decades. In concluding, we reflect on the cost of earth observations relative to the modest cost of transforming the observations into information of socio-economic value.

New high technology product development: The case of light emitting diodes

New high technology products usher in novel possibilities to transform the design, production and use of buildings. The high technology companies which design, develop and introduce these new products by generating and applying novel scientific and technical knowledge are faced with significant market uncertainty, technological uncertainty and competitive volatility. These characteristics present unique innovation challenges compared to low- and medium technology companies. This paper reports on an ongoing Construction Knowledge Exchange funded project which is tracking, real time, the new product development process of a new family of light emitting diode (LEDs) technologies. LEDs offer significant functional and environmental performance improvements over incumbent tungsten and halogen lamps. Hitherto, the use of energy efficient, low maintenance LEDs has been constrained by technical limitations. Rapid improvements in basic science and technology mean that for the first time LEDs can provide realistic general and accent lighting solutions. Interim results will be presented on the complex, emergent new high technology product development processes which are being revealed by the integrated supply chain of a LED module manufacture, a luminaire (light fitting) manufacture and end user involved in the project.