Avaliação tridimensional da sínfise mandibular em crânios secos e sua associação com diferentes classificações de tipos faciais

O objetivo deste trabalho foi desenvolver um estudo morfológico quantitativo e qualitativo da região da sínfise mandibular (SM), através da construção de modelos tridimensionais (3D) e avaliar o seu grau de associação com diferentes classificações de padrões faciais. Foram avaliados 61 crânios secos humanos de adultos jovens com oclusão normal, com idade entre 18 e 45 anos e dentadura completa. Tomografias computadorizadas de feixe cônico (TCFC) de todos os crânios foram obtidas de forma padronizada. O padrão facial foi determinado por método antropométrico e cefalométrico. Utilizando o critério antropométrico, tomando como referência o índice facial (IF), o padrão facial foi classificado em: euriprósopo (≤84,9), mesoprósopo (85,0 - 89,9) e leptoprósopo (≥90,0). Pelo critério cefalométrico, o plano mandibular (FMA) determinou o padrão facial em curto (≤21,0), médio (21,1 - 29,0) e longo (≥29,1); e o índice de altura facial (IAF) classificou a face em hipodivergente (≥0,750), normal (0,749 - 0,650) e hiperdivergente (≤0,649). A construção de modelos 3D, representativos da região da SM, foi realizada com o auxílio do software ITK-SNAP. Os dentes presentes nesta região, incisivos, caninos e pré-molares inferiores, foram separados do modelo por técnica de segmentação semi-automática, seguida de refinamento manual. Em seguida, foram obtidos modelos 3D somente com o tecido ósseo, possibilitando a mensuraçãodo volume ósseo em mm3 (VOL) e da densidade radiográfica, pela média de intensidade dos voxels (Mvox). No programa Geomagic Studio 10 foi feita uma superposição anatômica dos modelos 3D em bestfit para estabelecer um plano de corte padronizado na linha média. Para cada sínfise foi medida a altura (Alt), a largura (Larg) e calculado o índice de proporção entre altura e largura (PAL). A avaliação da presença de defeitos alveolares foi feita diretamente na mandíbula,obtendo-se a média de todas as alturas ósseas alveolares (AltOss) e a média da dimensão das deiscências presentes (Medef). O índice de correlação intra-classe (ICC) com valores entre 0,923 a 0,994,indicou alta reprodutibilidade e confiabilidade das variáveis medidas. As diferenças entre os grupos, determinados pelas classificações do padrão facial (IF, FMA e IAF), foram avaliadas através da análise de variância (oneway ANOVA) seguida do teste post-hoc de Tukey. O grau de associação entre o padrão facial e as variáveis Vol, Mvox, PAL, Alt, Larg, AltOss e Medef foi avaliado pelo coeficiente de correlação de Pearson com um teste t para r. Os resultados indicaram ausência de diferença ou associação entre o volume, densidade radiográfica e presença de defeitos alveolares da SM e o padrão facial quando determinado pelo IF, FMA e IAF. Verificou-se tendência de SM mais longas nos indivíduos com face alongada, porém a largura não mostrou associação com o padrão facial. Estes resultados sugerem que as classificações utilizadas para determinar o padrão facial não representam satisfatoriamente o caráter 3D da face humana e não estão associadas com a morfologia da SM.

Biological parameters, body length-weight and length-height relationships for various species in Greek waters

Biological/fisheries parameters (L sub(oo) M, F) are presented for four fish species (Gadiculus argenteus; Gaidropsarus mediterraneous; Symphurus ligulatus; Lepidorhombus boscii) as well as body length-weight and length-height relationships for 11 and 12 fish species, respectively, estimated from trawl samples collected using three different cod-ends (stretched mesh size: 14 mm and 20 mm diamond-shaped and 20 mm square-shaped) during 1993-1994, in the western Aegean and North Euboikos Gulf, Greece. The fisheries paramaters, estimated from length-frequency using the ELEFAN approach and software, are discussed in the light of recent information on the selectivity of the presently used trawl cod-end (14 mm diamond shaped)

The cost of quinine Cinchona pubescens control on Santa Cruz Island, Galapagos

We analyse the cost of controlling the invasive quinine tree Cinchona pubescens Vahl in the highlands of Santa Cruz Island, Galapagos. Control costs in ten 400 m2 plots formed the basis for estimating the cost of control over the whole island. In the plots, densities were 2100–24,000 stems/ha (stems >150 cm tall) and 55,000–138,000 stems/ha (all size classes combined). Control involved uprooting small plants, and applying of a mix of metsulfuron methyl and picloram to cut stumps or to machete cuts in the bark of larger trees. These methods are presently used by Galapagos National Park field crews to control quinine. Costs (in man hours, herbicide and US$) were related to stem density; the density of stems summed across four height classes was a better predictor of costs than density of any one size class. Regressions (on all size classes combined) formed the basis for predictive models of costs. Costs ranged from $14 to $2225 per ha depending on stem density. The amount of herbicide (active ingredient/ha) that must be applied to high density stands of quinine is higher than typical rates of application in an agricultural setting. The cost of treating all existing plants once across quinine’s known range on Santa Cruz Island (c. 11,000 ha) was estimated at c. US$1.65 million. CDF Contribution Number 1013.

Versuche zur Verringerung des Dorschbeifanges in Grundschleppnetzen

Bottom otter trawls with cut back upper panels were tested in the fischeries on Baltic Sea flounder and North Sea plaice to reduce cod by-catch. In a first series of experiments on board the fishing research cutter “Clupea” the cod-bycatch was reduced by 63 %. The catch of flounder was by 92 % higher in the cut back trawl. The same trawl with the same experimental set-up achieved aboard the fisching research vessel “Solea” on the other hand a reduction in cod-bycatch by 69 %. The catch of flounder was 23,3 % lesser in the topless trawl, which was in contrast to the “Clupea” trials. In the second series of experiments with the same cut back trawl the splits were shortened to reduce the net opening height from 0,9 m to 0,6 m previously. The cod-bycatch was reduced by 86 % and the catch of flounder was 81 % higher in comparison to the complete trawl. A prototype made of stronger net material but based on the cutting and rigging design of the tested cut back trawl with the shortened splits was tested with commercial twin trawlers. The cod-bycatch was reduced by 82,2 %, the catch of plaice by 43,3 % and the catch of dab by 44,6 % in the comparison to the commercial used trawl TV280. The flounder catch was in the topless trawl 10 % higher. In the North Sea in the comparison to a bottom trawl TV300 the cod by-catch was reduced by 89,8 %, but the catch of plaice and dab were 54 % and 58,7 % lesser. In the next step was a prototype of a normally in the North Sea plaice fisheries used trawl tested with a cut back of 2 m only. The cod catch was reduced by 16,9 % but the plaice catch, however , by 22,3 %. Kurzfassung Schleppnetze mit verkürzten Oberblättern wurden in der Fischerei auf Ostseeflunder und Nordseescholle zur Verringerung des Dorschbeifanges erprobt. In einer ersten Versuchsserie mit dem Forschungskutter „Clupea“ wurde der Dorschbeifang um 63 % reduziert. Die Fänge der Zielart Flunder waren im reduzierten Schleppnetz dagegen um 92 % höher. Das gleiche Schleppnetz mit gleichem Versuchsaufbau erzielte auf dem Fischereiforschungsschiff „Solea“ dagegen eine Reduktion des Dorschbeifanges um 69 %, wobei im Gegensatz zu den „Clupea“-Versuchen der Flunderfang um 23,3 % im reduzierten Netz geringer war. In der zweiten Versuchsserie wurden die Netzstander am reduzierten Schleppnetz verkürzt, um die Netzöffnungshöhe zu verringern. Dadurch wurde der Dorschbeifang in Versuchen mit dem Forschungskutter „Clupea“ um 86 % verringert und die Flunderfänge waren im reduzierten Schleppnetz 81 % höher. Basierend auf dem Zuschnitt des erprobten Schleppnetzes, jedoch aus stärkerem Netzmaterial gefertigt, wurde ein Prototyp auf kommerziellen Doppelnetz-Kuttern erprobt. In der Ostsee wurde in diesen Versuchen der Dorschbeifang um 82,2 %, der Schollenfang um 43,3 % und der Klieschenfang um 44,6 % mit dem im Oberblatt verkürztem Schleppnetz im Vergleich zum Kutterschleppnetz TV280 reduziert. Der Flunderfang war im reduzierten Schleppnetz 10 % höher. Auf der Nordsee wurde mit diesem Versuchsnetz im Vergleich zu einem TV 300 der Kabeljaubeifang um 89,8 % verringert, die Schollenfänge waren jedoch 54 % geringer und die Klieschenfänge 58,7 % geringer als im Vergleichsnetz. In einer weiteren Variante wurde ein in der Nordseeschollenfischerei verwendetes Grundschleppnetz mit 2 m geringfügig im Oberblatt zurückgeschnitten und mit dem Prototyp auf einem Doppelnetz-Heckschlepper verglichen. Der Kabeljaubeifang wurde dadurch um 16,9 % der Schollenfang aber um 22,3 % verringert

Topic 1. Some steric-height features of the water off the Pacific coast of Canada; Topic 2. Possible warming of the water at station P in the northeast Pacific during 1956-1984 [abstract]

TOPIC 1: In terms of seasonal scale, temperature effect dominates the annual change of steric height in the open ocean whereas salinity effect controls it along the continental shelf. Large portion of the annual change of height relative to the 1000-db surface is contained in the upper 100m layer. However, in interannual scale large anomalies of steric height in the open ocean, are more often than not, caused by halosteric rather than thermosteric effect. At least in the open ocean the heights are almost totally determined by the behavior of deep water. Their interannual variability appears to be related to the cumulative effect of Eckman pumping. TOPIC 2: There is a "trend" that over the past 28 years the water at Station P has warmed. Least-square analysis indicates that this warming may be significant but shortening of the time-series data by approximately 10 years fails to show that this is the case. These "trends" have to be interpreted with care. The warming may be "apparent" in that it is not indicated clearly in the deep isopynal surfaces which, during the above period, have deepened. Thus warming at the isobaric surfaces may be the effect of the downward migration of the isopynal surfaces.

Material model of lung parenchyma based on living precision-cut lung slice testing.

We describe a novel constitutive model of lung parenchyma, which can be used for continuum mechanics based predictive simulations. To develop this model, we experimentally determined the nonlinear material behavior of rat lung parenchyma. This was achieved via uni-axial tension tests on living precision-cut rat lung slices. The resulting force-displacement curves were then used as inputs for an inverse analysis. The Levenberg-Marquardt algorithm was utilized to optimize the material parameters of combinations and recombinations of established strain-energy density functions (SEFs). Comparing the best-fits of the tested SEFs we found Wpar = 4.1 kPa(I1-3)2 + 20.7 kPa(I1 - 3)3 + 4.1 kPa(-2 ln J + J2 - 1) to be the optimal constitutive model. This SEF consists of three summands: the first can be interpreted as the contribution of the elastin fibers and the ground substance, the second as the contribution of the collagen fibers while the third controls the volumetric change. The presented approach will help to model the behavior of the pulmonary parenchyma and to quantify the strains and stresses during ventilation.