Computer Simulation Tb(lll) Speciation in Human Blood Plasma

A multi phase model of human blood plasma was developed and the Tb(Ⅲ) speciation in this system was studied. The results show that the speciation of Tb(Ⅲ) depends on the concentration of Tb(Ⅲ). When the concentration of Tb(Ⅲ) is below 4.000×10 -8 mol/L, most of Tb(Ⅲ) exists as soluble species while the concentration of Tb(Ⅲ) is in between 4.000 ×10 -8 mol/L and 1.667×10 -2 mol/L, precipitates(TbPO 4 and Tb 2 (CO 3 ) 3 ) are the dominant species of Tb(Ⅲ). Among soluble Tb(Ⅲ) ...

High-temperature and high-pressure extraction of Ln(n)@C-2n(Ln=Y,Gd,Tb)

A high temperature and high pressure method was used to efficiently and selectively extract metallofullerenes Ln(m)@C-2n,(Ln = Y, Gd, Tb) in a closed stainless steel autoclave under inert gas protection. 1, 2, 3-Trichlorobenzene was found to be more effective and selective for the extraction of Ln@C-82 (Ln=Y, Gd, Tb) from empty fullerenes and other metallofullerene species.

高温高压法提取金属富勒烯Ln_m@C_(2n)(Ln=Y,Gd,Tb)

笼内金属富勒烯以其独特的结构性质和潜在的应用价值而引起了人们极大的注意 [1～ 3] ,但因制备技术复杂、产率低以及将其从伴生的空心富勒烯中分离出来比较困难而使其研究受到很大的限制 .笼内金属富勒烯的分离提取始终是金属富勒烯研究的一个重要分支 .通常的方法是将放电得到的烟炱采用甲苯索氏提取的方法粗提 ,然后用高压液相色谱法分离得到纯品 ,笼内金属富勒烯的产率仅为烟炱的 0 .1 % [4～ 6] .我们改进了常规的提取方法 ,建立了一种新的提取方法—高温高压提取法 .具体的做法是采用甲苯索氏提取法从烟炱中提取出空心富勒烯和少量金属富勒烯 ,对剩余物用 1 ,2 ,4-氯苯高温高压法提取 .笼内金属富勒烯的产率增大了 5倍 ( 0 .5 % ) ,这一结果目前尚未见文献报道 .1　实验部分1 .1　金属富勒烯的合成　笼内金属富勒烯 Lnm@C2 n( Ln=Y,Tb,Gd)采用电弧放电法 ,在自制的一套电弧放电器中合成 .将 8mm× 2 0 0 mm的光谱纯级石墨棒钻出 5 mm× 1 5 0 mm的深孔 ,充填经预先处理的各种稀土氧化物和石墨粉的混合物 ,混合物中稀土原子和碳原子物质的量比为 1∶ 5 ...

Tb(III) speciation in human blood plasma by computer simulation

A multi-phase model was developed and Tb(III) speciation in human blood plasma was studied. At a concentration below 3.744x 10(-4) mol/L (or at the concentration), Tb(III) is mostly bound to phosphate to form precipitate of TbPO4. As the concentration of Tb(III) increases, phosphate is exceeded and another kind of precipitate of Tb-2(CO3)(3) appears. Among soluble Tb(III) species, Tb(III) mainly distribute in [Tb (Tf)] at low concentration and in [Tb (HSAA, [Tb-2 (Tf)], [Th (IgG)], [Tb (Lactate)](2+), [Tb (CitArgH)] and free Tb(III) at high concentration.

Infrared spectra and VUV excitation properties of BaLnB(9)O(16): Re (Ln = La, Gd; Re = Eu, Tb)

The infrared spectra of BaLnB(9)O(16):Re, along with the VUV excitation spectra, have been measured. The spectra were tentatively interpreted in terms of the data on absorptions of the borate groups and band structure. It was observed that there are absorption due to BO3 and BO4 groups, indicating that there are BO3 and BO4 groups in BaLnB(9)O(16). It is found that absorption of the borate groups is located in the range from 120 to 170 mn. This result reveals that there is an energy transfer from host to the rare earth ions. It also observed that the energy of charge transfer band, the host absorption, the total crystal field splitting of d-levels of Tb3+ increase with the decrease in the Ln(3+) radius. (C) 2001 Elsevier Science B.V. All rights reserved.

Ca_2Y_8(SiO_4)_6O_2∶RE(RE=Eu,Tb)发光薄膜的制备及发光性能的研究

采用溶胶 凝胶法制备了稀土离子掺杂 (Eu3+ ,Tb3+ )的氧磷灰石三元稀土硅酸盐Ca2 Y8(SiO4 ) 6 O2 发光薄膜。通过X射线衍射 (XRD) ,红外光谱 (IR) ,扫描电镜 (SEM)等方法对薄膜的组成、结构、颗粒尺寸、形貌及厚度进行了研究 ,通过发光光谱对薄膜的发光性质进行了分析。XRD结果表明 70 0℃时薄膜尚处于非晶态 ,80 0℃时已开始有Ca2 Y8(SiO4 ) 6 O2 的物相形成 ,10 0 0℃时结晶已完全。这一点和红外光谱的结果相符。发光光谱测试表明Ca2 Y8(SiO4 ) 6 O2 ∶Eu3+ 薄膜显示了很强的红光发射 ,并以Eu3+ 的5D0 -7F2 (616nm)超灵敏跃迁为最强一组。Ca2 Y8(SiO4 ) 6 O2 ∶Tb3+ 的发射光谱由蓝光发射和绿光发射两部分组成 ,前者对应于5D3-7FJ,后者对应于5D4 -7FJ(J =6,5 ,4,3 ) ,且以5D4 -7F5(5 44nm)绿光发射为最强。

MAl_2O_4:Eu~(2+)、RE~(3+)长余辉发光性质的研究

研究鳞石英结构碱土铝酸盐MAl2O4 Eu2+、RE3+(M=Mg,Ca,Sr,Ba;RE=Y,La,Ce,Pr,Nd,Sm,Gd,Tb,Dy,Ho,Er,Tm,Yb,Lu)的荧光及长余辉发光性质.其发光由Eu2+的4f-5d跃迁产生.Re3+作为辅助激活离子,提供合适的陷阱能级.即使用RE3+的特征波长激发,在MAl2O4 Eu2+、RE3+的发光中也观察不到RE3+的发光.基于其荧光,热释光,X-射线,红外光谱等实验结果,分析这一结构对稀土发光的影响,并总结其发光规律

Calculation of nonlinear optical coefficients of orthorhombic Re-2(MoO4)(3) crystals

From the chemical bond viewpoint, the second-order nonlinear optical (NLO) tensor coefficients of some Re-2(MoO4)(3) (ReMO)-type tare earth molybdates, with Re = Pr, Nd, Sm, Eu, Gd, Tb and Dy, have been calculated by using the chemical bond theory of complex crystals and the modified bond charge model. All kinds of constituent chemical bonds are considered in the calculation. The major part of the NLO properties of these ReMO crystals is found from the ReO7 groups. The NLO coefficients of these ReMO crystals decrease with Re from Pr to Dy. (C) 1998 Elsevier Science Ltd. All rights reserved.

Synthesis and spectroscopic studies of endohedral metallofullerenes Tb@C-2n

Endohedral metallofullerenes Tb@C-2n were synthesized and extracted with high-yield by K-H carbon-are evaporation and an effective pyridine extraction technique at high-temperature high-pressure. Laser-desorption-ionization time-of-flight (LD-TOF) mass spectrometry, X-ray photoelectron spectroscopy (XPS), solid-state fluorescent emission spectroscopy and gas phase derivation reaction with the self-chemical ionization mass spectrometric ion system of vinyl acetate were employed for studying the electronic structures, fluorescent properties and gas phase reactivities of metallofullerenes Tb@C-2n. The experimental results suggest that endohedral metallofullerenes Tb@C-2n would have the approximate structures of Tb3+@C-2n(3-) similar to other metallofullerenes, good fluorescent emission properties and active reactivities in gas phase ion-molecular reactions.

真空熔炼(Tb、Dy)Fe金属间化合物的研究

研究了采用真空电弧炉在配制熔炼（Ｔｂ、Ｄｙ）Ｆｅ金属间化合物过程中各种元素成分的变化。结果表明，在真空度约为１．３３Ｐａ下，经一定温度、时间熔炼后，（Ｔｂ、Ｄｙ）Ｆｅ中元素的成分由开始配制的组成—ＴｂＦｅ１．７５和ＤｙＦｅ１．７０，经１２ｍｉｎ熔炼后约为ＴｂＦｅ１．７５８和ＤｙＦｅ１．７３０；经２４ｍｉｎ熔炼后约为ＴｂＦｅ１．７６５和ＤｙＦｅ１．７５６。元素的挥发损失Ｄｙ＞Ｔｂ＞Ｆｅ。这和各元素的熔点、蒸气压等物理化学性质有关。

Cure processing modeling and cure cycle simulation of epoxy-terminated poly(phenylene ether ketone) .3. Determination of the time of pressure application

The curing temperature, pressure, and curing time have significant influence on finished thermosetting composite products. The time of pressure application is one of the most important processing parameters in the manufacture of a thermosetting composite. The determination of the time of pressure application relies on analysis of the viscosity variation of the polymer, associated with curing temperature and curing time. To determine it, the influence of the time of pressure application on the physical properties of epoxy-terminated poly(phenylene ether ketone) (E-PEK)-based continuous carbon fiber composite was studied. It was found that a stepwise temperature cure cycle is more suitable for manufacture of this composite. There are two viscosity valleys, in the case of the E-PEK system, associated with temperature during a stepwise cure cycle. The analysis on the effects of reinforcement fraction and defect content on the composite sheet quality indicates that the width-adjustable second viscosity valley provides a suitable pressing window. The viscosity, ranging from 400 to 1200 Pa . s at the second viscosity valley, is the optimal viscosity range for applying pressure to ensure appropriate resin flow during curing process, which enables one to get a finished composite with optimal fiber volume fraction and low void content. (C) 1997 John Wiley & Sons, Inc.

Luminescence properties of sol-gel derived silica gels doped and undoped with RE-complexes (RE=Eu, Tb)

The luminescence properties of silica gels and silica gels doped with two rare earth complexes, Eu(TTA)(3) and Tb(o-CBA)(3) (TTA=thenoyltriffuocetate, o-CBA=o-chlorobenzoic acid) are reported and discussed. Pure silica gels show a blue luminescence, and the maximum excitation and emission wavelengths depend strongly on the solvents used. Both of the studied rare earth complexes exhibit the characteristic emissions of the rare earth ions in silica gels, i.e., Eu3+5D0-->F-7(J)(J=0,1,2,3,4), Tb3+5D4-->F-7(J)(J=3,4,5,6) transitions. Compared with the pure RE-complexes powder, the silica gels doped with RE-complexes show fewer emission lines of the rare earth ions. Furthermore the rare earth ion (Tb3+) presents a longer lifetime (1346 mu s) in silica gel doped with Tb(o-CBA)3 than in pure Tb((o-CBA)(3) powder (744 mu s). The reasons responsible for these results are discussed in the context.

CaAl_3BO_7:RE(RE=Ce,Gd,Tb)中稀土离子的光谱特性

采用固相反应法合成了ＣａＡｌ３ＢＯ７ＲＥ（ＲＥ＝Ｃｅ，Ｇｄ，Ｔｂ），研究了Ｃｅ３＋，Ｇｄ３＋和Ｔｂ３＋的光谱特性．发现铈离子周围存在较强的晶场，使基态的４ｆ能级劈裂较大，从而导致铈离子的特征发射峰重叠较大；Ｃｅ３＋的５ｄ能级明显低于Ｇｄ３＋的６Ｉ、６Ｐ能级；Ｃｅ３＋和Ｔｂ３＋之间存在有效的能量传递

The spectral properties of BaB8O13:Eu,Tb phosphors

The luminescence properties of BaB8O13:xEu,yTb phosphors which were synthesized in air atmosphere have been studied. The emissions of europium(III), terbium(III) and europium(II) have been observed in BaB8O13:xEu, yTb phosphors. Electron paramagnetic resonance (EPR) studies were carried out. The intensities of EPR peaks of europium(II) are increased if terbium(III) is increased in BaB8O13:Eu3+,yTb(3+) phosphors. So the valence state of europium is influenced by terbium(III). These phenomena can be explained by an electron transfer mechanism. We found a new kind of method to prepare trichromatic phosphor that two rare earth ions activated in a BaB8O13 matrix.

A new thermoplastic polyimide composite based on 1,4-(3,4-dicarboxyphenoxyl)benzene/4,4'-methylene dianiline

New thermoplastic polyimide (PEI) composites based on 1,4-(3,4-discarboxyphenoxyl)benzene/4,4'- methylene dianiline have been fabricated by the approach of polymerization by the approach of polymerization of monomer reactants (PMR). The chemical and physical behavior of the resin during processing are determined by infrared spectroscopy and rheology. The influence of processing conditions on the composite properties is investigated. The processing, physical and mechanical properties of the composites reinforced with different fibers are presented.