Eye-safe UV stand-off Raman spectroscopy for the ranged detection of explosives in the field

Increasing worldwide terrorist attacks involving explosives presents a growing need for a rapid and ranged explosive detection method that can safely be deployed in the field. Stand-off Raman spectroscopy shows great promise; however, the radiant exposures of lasers required for adequate signal generation are often much greater than what is safe for the eye or the skin, restricting use of the technique to un-populated areas. Here, by determining the safe exposure levels for lasers typically used in Raman spectroscopy, optimal parameter values are identified, which produce the largest possible detection range using power densities that do not exceed the eye-safe limit. It is shown that safe ultraviolet pulse energies can be more than three orders of magnitude greater than equivalent safe visible pulse energies. Coupling this to the 16-fold increase in Raman signal obtained in the ultraviolet at 266 nm over that at 532 nm results in a 131 times larger detection range for the eye-safe 266-nm system over an equivalent eye-safe 532-nm laser system. For the Raman system described here, this translates to a maximum range of 42 m for detecting Teflon with a 266-nm laser emitting a 100-mm diameter beam of 23.5-mJ nanosecond pulses.

Keep It Tame: Promoting respect online Safe And Well Online Pilot Study: Evaluating the design, engagement and impact of a social marketing approach aimed at 12 to 18 year olds

This report describes the Year One Pilot Study processes, and articulates findings from the major project components designed to address these challenges noted above (See Figure 1). Specifically, the pilot study tested the campaign research and development process involving participatory design with young people and sector partners, and the efficacy and practicality of conducting a longitudinal, randomised control trial online with minors, including ways oflinking survey data to campaign data. Each sub-study comprehensively considered the ethical requirements of conducting online research with minors in school settings. The theoretical and methodological framework for measuring campaign engagement and efficacy (Sub-studies 3, 4 and 5) drew on the Model of Goal-Directed Behaviour (MGB) (Perugini & Bagozzi 2001) and Nudge Theory (Thaler & Sunstein, 2008).

‘Appreciate A Mate’ Helping others to feel good about themselves. Safe and Well Online: A report on the development and evaluation of a positive messaging social marketing campaign for young people.

This report describes the Year Two/Campaign Two processes, and articulates findings from the major project components designed to address the challenges noted above (see Figure 1). Three major components comprise the Safe and Well Online project: 1) A participatory design (PD) process involving young people and sector partners (UWS) for; 2) campaign development (Zuni & Digital Arts Network); and 3) a cohort study (University of South Australia) to evaluate campaign effectiveness and attitude and behaviour change. Each sub-study comprehensively considered the ethical requirements of conducting online research with minors. The theoretical and methodological framework for measuring campaign engagement and efficacy (Sub-studies 3, 4 and 5) drew on the Model of Goal Directed Behaviour (MGB) (Perugini & Bagozzi 2001) and Nudge Theory (Thaler & Sunstein, 2008). This report extends the findings and conclusions of the Year One Pilot Study ‘‘Keep it Tame’’ (Spears et.al, 2015), and details the development and evaluation of the second of four Safe and Well Online Campaigns—‘‘Appreciate A Mate’: Helping others feel good about themselves’.

Reviewing in-vehicle systems to improve fuel efficiency and road safety

Road transport plays a significant role in various industries and mobility services around the globe and has a vital impact on our daily lives. However it also has serious impacts on both public health and the environment. In-vehicle feedback systems are a relatively new approach to encouraging driver behavior change for improving fuel efficiency and safety in automotive environments. While many studies claim that the adoption of eco-driving practices, such as eco-driving training programs and in-vehicle feedback to drivers, has the potential to improve fuel efficiency, limited research has integrated safety and eco-driving. Therefore, it is crucial to understand the human factors related theories and practices which will inform the design of an in-vehicle Human Machine Interface (HMI) that could provide real-time driver feedback and consequently improve both fuel efficiency and safety. This paper provides a comprehensive review of the current state of published literature on in-vehicle systems to identify and evaluate the impact of eco-driving and safety feedback systems. This paper also discusses how these factors may conflict with one another and have a negative effect on road safety, while also exploring possible eco-driving practices that could encourage more sustainable, environmentally-conscious and safe driving behavior. The review revealed a lack of comprehensive theoretical research integrating eco-driving and safe driving, and no current available HMI covering both aspects simultaneously. Furthermore, the review identified that some eco-driving in-vehicle systems may enhance fuel efficiency without compromising safety. The review has identified a range of concepts which can be developed to influence driver acceptance of safety and eco-driving systems within the area of HMI. This can promote new research aimed at enhancing our understanding of the relationship between eco-driving and safety from the human factors viewpoint. This provides a foundation for developing innovative, persuasive and acceptable in-vehicle HMI systems to improve fuel efficiency and road safety.

Human factors evaluation of a novel Australian approach for activating railway level crossings

There are currently 23,500 level crossings in Australia, broadly divided active level crossings with flashing lights; and passive level crossings controlled by stop and give way signs. The current strategy is to annually upgrade passive level crossings with active controls within a given budget, but the 5,900 public passive crossings are too numerous to be upgraded all. The rail industry is considering alternative options to treat more crossings. One of them is to use lower cost equipment with reduced safety integrity level, but with a design that would fail to a safe state: in case of the impossibility for the system to know whether a train is approaching, the crossing changes to a passive crossing. This is implemented by having a STOP sign coming in front of the flashing lights. While such design is considered safe in terms of engineering design, questions remain on human factors. In order to evaluate whether such approach is safe, we conducted a driving simulator study where participants were familiarized with the new active crossing, before changing the signage to a passive crossing. Our results show that drivers treated the new crossing as an active crossing after the novelty effect had passed. While most participants did not experience difficulties with the crossing being turned back to a passive crossing, a number of participants experienced difficulties stopping in time at the first encounter of such passive crossing. Worse, a number of drivers never realized the signage had changed, highlighting the link between the decision to brake and stop at an active crossing to the lights flashing. Such results show the potential human factor issues of changing an active crossing to a passive crossing in case of failure of the detection of the train.

Overcoming language barriers in healthcare: A protocol for investigating safe and effective communication when patients or clinicians use a second language

Background Miscommunication in the healthcare sector can be life-threatening. The rising number of migrant patients and foreign-trained staff means that communication errors between a healthcare practitioner and patient when one or both are speaking a second language are increasingly likely. However, there is limited research that addresses this issue systematically. This protocol outlines a hospital-based study examining interactions between healthcare practitioners and their patients who either share or do not share a first language. Of particular interest are the nature and efficacy of communication in language-discordant conversations, and the degree to which risk is communicated. Our aim is to understand language barriers and miscommunication that may occur in healthcare settings between patients and healthcare practitioners, especially where at least one of the speakers is using a second (weaker) language. Methods/Design Eighty individual interactions between patients and practitioners who speak either English or Chinese (Mandarin or Cantonese) as their first language will be video recorded in a range of in- and out-patient departments at three hospitals in the Metro South area of Brisbane, Australia. All participants will complete a language background questionnaire. Patients will also complete a short survey rating the effectiveness of the interaction. Recordings will be transcribed and submitted to both quantitative and qualitative analyses to determine elements of the language used that might be particularly problematic and the extent to which language concordance and discordance impacts on the quality of the patient-practitioner consultation. Discussion Understanding the role that language plays in creating barriers to healthcare is critical for healthcare systems that are experiencing an increasing range of culturally and linguistically diverse populations both amongst patients and practitioners. The data resulting from this study will inform policy and practical solutions for communication training, provide an agenda for future research, and extend theory in health communication.

Safety culture and speeding in the Australian heavy vehicle industry

Inappropriate speed and speeding are among the highest causes of crashes in the heavy vehicle industry. Truck drivers are subjected to a broad range of influences on their behaviour including industrial pressures, company monitoring and police enforcement. Further, drivers have a high level of autonomy over their own behaviour. As such it is important to understand how these external influences interact with commonly shared beliefs, attitudes and values of heavy vehicle drivers to influence their behaviour. The present study uses a re-conceptualisation of safety culture to explore the behaviours of driving at an inappropriate speed and speeding in the heavy vehicle industry. A series of case studies, consisting of interviews and ride-along observations, were conducted with three transport organisations to explore the effect of culture on safety in the heavy vehicle industry. Results relevant to inappropriate speed are reported and discussed. It was found that organisational management through monitoring, enforcement and payment, police enforcement, customer standards and vehicle design factors could all reduce the likelihood of driving at inappropriate speeds under some circumstances. However, due to weaknesses in the ability to accurately monitor appropriate speed, this behaviour was primarily influenced by cultural beliefs, attitudes and values. Truck drivers had a tendency to view speeding as relatively safe, had a desire to speed to save time and increase personal income, and thus often attempted to speed without detection. When drivers saw speeding as dangerous, however, they were more likely to drive safely. Implications for intervention are discussed.

From gearstick to joystick – Challenges in designing new interventions for the safety-critical driving context

Consumer electronics increasingly find their way into cars and are often portrayed as unwanted distractions. As part of our endeavour to capitalise on these technologies as safety tools rather than safety threats, we suggest to use smartphones, head-up displays, vehicle interfaces, and other digital gadgets: a) as readily available and lightweight sensing devices, and b) as platforms for engaging interventions that provide safe stimuli in real- time while driving. In our effort to make safe driving behaviours more fun, we explore ways to apply gamification to driving. In this paper, we illustrate the need for a careful balance between fun and safety and reveal ethical issues that arise when introducing new technology interventions into this complex and safety- critical design space.

An Integrated Assessment Of The Suitability Of Domestic Solar Still As A Viable Safe Water Technology For India

Improving access to safe drinking water can result in multi-dimensional impacts on people's livelihood. This has been aptly reflected in the Millennium Development Goals (MDG) as one of the major objectives. Despite the availability of diverse and complex set of technologies for water purification, pragmatic and cost-effective use of the same is impeding the use of available sources of water. Hence, in country like India simple low-energy technologies such as solar still are likely to succeed. Solar stills would suffice the basic minimum drinking water requirements of man. Solar stills use sunlight, to kill or inactivate many, if not all, of the pathogens found in water. This paper provides an integrated assessment of the suitability of domestic solar still as a viable safe water technology for India. Also an attempt has been made to critically assess the operational feasibility and costs incurred for using this technology in rural India.

Drink driver rehabilitation and new developments

Drink driving continues to be a major public health concern. Significant reductions in road fatalities have been achieved due largely to the Safe Systems Approach to road safety. However, serious injury due to road trauma has increased in most Australian jurisdictions. Some subgroups of drink drivers such as young drivers and Indigenous drink drivers are vulnerable to road trauma and have been less responsive to countermeasures based on the deterrence philosophy. Drink driving rehabilitation programs that use a combination of deterrence, education and social control models have been moderately successful in reducing recidivism. However, most of these programs do not adequately address alcohol related health concerns or the needs of drink drivers in remote and rural areas. Scant attention has also been given to the use of brief online drink driving interventions. The ‘Under the Limit’ (UTL) drink driving rehabilitation program has recently been revised to ensure that its content is contemporary, relevant and evidenced based. CARRS-Q has also developed a brief online program that targets first time convicted drink drivers who have a BAC under 0.15g/100mL and a culturally sensitive program that targets Aboriginals and Torres Strait Islanders living in rural and remote areas. These new developments will be discussed in the context of the most effective road safety educational policy and practice.

The National Road Safety Partnership Program providing a pathway for any business/organisation to create a positive road safety culture

The National Road Safety Partnership Program (NRSPP) is an industry-led collaborative network which aims to support Australian businesses in developing a positive road safety culture. It aims to help businesses to protect their employees and the public, not only during work hours, but also when their staff are ‘off-duty’. How do we engage and help an organisation minimise work-related vehicle crashes and their consequences both internally, and within the broader community? The first step is helping an organisation to understand the true cost of its road incidents. Larger organisations often wear the costs without knowing the true impact to their bottom line. All they perceive is the change in insurance or vehicle repairs. Understanding the true cost should help mobilise a business’s leadership to do more. The next step is ensuring the business undertakes an informed, structured, evidence-based pathway which will guide them around the costly pitfalls. A pathway based around the safe system approach with buy-in at the top which brings the workforce along. The final step, benchmarking, allows the organisation to measure and track its change. This symposium will explore the pathway steps for organisations using NRSPP resources to become engaged in road safety. The 'Total Cost of Risk' calculator has been developed by Zurich, tested in Europe by Nestle and modified by NRSPP for Australia. This provides the first crucial step. The next step is a structured approach through the Workplace Road Safety Guide using experts and industry to discuss the preferred safe system approach which can then link into the national Benchmarking Project. The outputs from the symposium can help frame a pathway for organisations to follow through the NRSPP website.

Proposed vehicle impact speed: Severe injury probability relationships for selected crash types

Speed is recognised as a key contributor to crash likelihood and severity, and to road safety performance in general. Its fundamental role has been recognised by making Safe Speeds one of the four pillars of the Safe System. In this context, impact speeds above which humans are likely to sustain fatal injuries have been accepted as a reference in many Safe System infrastructure policy and planning discussions. To date, there have been no proposed relationships for impact speeds above which humans are likely to sustain fatal or serious (severe) injury, a more relevant Safe System measure. A research project on Safe System intersection design required a critical review of published literature on the relationship between impact speed and probability of injury. This has led to a number of questions being raised about the origins, accuracy and appropriateness of the currently accepted impact speed–fatality probability relationships (Wramborg 2005) in many policy documents. The literature review identified alternative, more recent and more precise relationships derived from the US crash reconstruction databases (NASS/CDS). The paper proposes for discussion a set of alternative relationships between vehicle impact speed and probability of MAIS3+ (fatal and serious) injury for selected common crash types. Proposed Safe System critical impact speed values are also proposed for use in road infrastructure assessment. The paper presents the methodology and assumptions used in developing these relationships. It identifies further research needed to confirm and refine these relationships. Such relationships would form valuable inputs into future road safety policies in Australia and New Zealand.

New constraints on the pion EM form factor using Pi `(-Q(2))

We study the constraints arising on the expansion parameters c and d of the pion electromagnetic form factor from the inclusion of pure spacelike data and the phase of timelike data along with one spacelike datum, using as input the first derivative of the QCD polarization amplitude Pi'(-Q(2)). These constraints when combined with other analyses, provide a valuable check on a determination of c due to Guo et al. and on our previous work where pionic contribution to the (g - 2) of the muon was used as the input. This work further illustrates the power of analyticity techniques in form factor analysis.

Safe to crush? A pilot study into solid dosage form modification in aged care

Aims To observe medication solid dosage form modification in aged care facilities (ACFs), and assess staff levels of self-perceived knowledge of medication modification and the types of resources available to them. Method Observation of medication rounds in a convenience sample of Australian Capital Territory ACFs and assessment of staff knowledge of dosage form modification and available resources. Results From 160 observations across six medication rounds, 29 residents had a total of 75 medications modified by the nursing staff prior to administration, with 32% of these instances identified as inappropriate. The methods used for crushing and administration resulted in drug mixing, spillage and incomplete dosing. The staff reported adequate resources; however, a lack of knowledge on how to locate and use these resources was evident. Conclusions Improved staff training on how to use available resources is needed to reduce the observed high incidence of inappropriate medication crushing.