Residual strength of GRP laminates with multiple randomly distributed fragment impacts

The residual tensile strength of glass fibre reinforced composites with randomly distributed holes and fragment impact damages have been investigated. Experiments have been performed on large scale panels and small scale specimens. A finite element model has been developed to predict the strength of multi-axial panels with randomly distributed holes. Further, an effective analytical model has been developed using percolation theory. The model gives an estimation of the residual strength as function of removed surface area caused by the holes. It is found that if 8% of the area is removed, the residual strength is approximately 50% of the un-damaged strength. © 2014 Published by Elsevier Ltd.

Dependence of dye regeneration and charge collection on the pore-filling fraction in solid-state dye-sensitized solar cells

Solid-state dye-sensitized solar cells rely on effective infiltration of a solid-state hole-transporting material into the pores of a nanoporous TiO 2 network to allow for dye regeneration and hole extraction. Using microsecond transient absorption spectroscopy and femtosecond photoluminescence upconversion spectroscopy, the hole-transfer yield from the dye to the hole-transporting material 2,2′,7,7′-tetrakis(N,N-di-p- methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD) is shown to rise rapidly with higher pore-filling fractions as the dye-coated pore surface is increasingly covered with hole-transporting material. Once a pore-filling fraction of ≈30% is reached, further increases do not significantly change the hole-transfer yield. Using simple models of infiltration of spiro-OMeTAD into the TiO2 porous network, it is shown that this pore-filling fraction is less than the amount required to cover the dye surface with at least a single layer of hole-transporting material, suggesting that charge diffusion through the dye monolayer network precedes transfer to the hole-transporting material. Comparison of these results with device parameters shows that improvements of the power-conversion efficiency beyond ≈30% pore filling are not caused by a higher hole-transfer yield, but by a higher charge-collection efficiency, which is found to occur in steps. The observed sharp onsets in photocurrent and power-conversion efficiencies with increasing pore-filling fraction correlate well with percolation theory, predicting the points of cohesive pathway formation in successive spiro-OMeTAD layers adhered to the pore walls. From percolation theory it is predicted that, for standard mesoporous TiO2 with 20 nm pore size, the photocurrent should show no further improvement beyond an ≈83% pore-filling fraction. Solid-state dye-sensitized solar cells capable of complete hole transfer with pore-filling fractions as low as ∼30% are demonstrated. Improvements of device efficiencies beyond ∼30% are explained by a stepwise increase in charge-collection efficiency in agreement with percolation theory. Furthermore, it is predicted that, for a 20 nm pore size, the photocurrent reaches a maximum at ∼83% pore-filling fraction. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Graphene nanoribbon blends with P3HT for organic electronics.

In organic field-effect transistors (OFETs) the electrical characteristics of polymeric semiconducting materials suffer from the presence of structural/morphological defects and grain boundaries as well as amorphous domains within the film, hindering an efficient transport of charges. To improve the percolation of charges we blend a regioregular poly(3-hexylthiophene) (P3HT) with newly designed N = 18 armchair graphene nanoribbons (GNRs). The latter, prepared by a bottom-up solution synthesis, are expected to form solid aggregates which cannot be easily interfaced with metallic electrodes, limiting charge injection at metal-semiconductor interfaces, and are characterized by a finite size, thus by grain boundaries, which negatively affect the charge transport within the film. Both P3HT and GNRs are soluble/dispersible in organic solvents, enabling the use of a single step co-deposition process. The resulting OFETs show a three-fold increase in the charge carrier mobilities in blend films, when compared to pure P3HT devices. This behavior can be ascribed to GNRs, and aggregates thereof, facilitating the transport of the charges within the conduction channel by connecting the domains of the semiconductor film. The electronic characteristics of the devices such as the Ion/Ioff ratio are not affected by the addition of GNRs at different loads. Studies of the electrical characteristics under illumination for potential use of our blend films as organic phototransistors (OPTs) reveal a tunable photoresponse. Therefore, our strategy offers a new method towards the enhancement of the performance of OFETs, and holds potential for technological applications in (opto)electronics.

A study on strong room temperature photoluminescence of a-SiNx : H films

Photoluminescence measurements have been performed in Si-rich a-SiNx:H (x less than or equal to 1.3) alloys prepared by glow discharge. It is observed that the blue shift of the peak of room temperature luminescence spectrum with increasing N content parallels increasing intensity. Two distinct luminescence mechanisms are proposed in a-SiNx:H with the threshold near x = 0.8. For low x, the samples show typical luminescence properties of a-Si:H, while for high x, the normalized luminescence bands are independent of temperature. Combining percolation theory, the luminescence origins are discussed on the basis of Brodsky's quantum well model. (C) 2000 Elsevier Science B.V. All rights reserved.

Tunable optical properties of nano-Au on vanadium dioxide

The optical properties of Au nanoparticles deposited on thermochromic thin films of VO2 are investigated using spectroscopy. A localized modification on the transmittance spectrum of VO2 film is formed due to the presence of Au nanoparticles which exhibit localized surface plasmon resonance (LSPR) in the visible-near IR region. The position of the modification wavelength region shows a strong dependence on the Au mass thickness and shifts toward the red as it increases. On the other hand, it was found that the LSPR of Au nanoparticles can be thermally tunable because of the thermochromism of the supporting material of VO2. The LSPR wavelength, lambda(SPR), shifts to the blue with increasing temperature, and shifts back to the red as temperature decreases. A fine tuning is achieved when the temperature is increased in a stepwise manner.

高分子溶液中物理凝胶化的Monte Carlo模拟和小角中子散射研究

高分子凝胶广泛地存在于自然界以及日常生活中，按其形成作用力不同分为化学凝胶和物理凝胶两大类。由于高分子物理凝胶具有凝胶化的可逆性及其对环境条件强烈的响应性，因此，在近半个世纪的研究与应用中受到极大的关注。高分子溶液中的物理凝胶因其结构及形成机制复杂，在实验方面，除了散射技术及流变技术能够有效地揭示它的部分信息外，其它的实验手段很难用于这个领域的研究；在理论方面，化学凝胶的理论已经比较成熟，而物理凝胶的粘弹性质以及凝胶化是一个远离平衡态的松弛过程，除了一些特征的标度指数外，人们还没有得到适用于高分子物理凝胶的普适规律。当前，由于计算机模拟理论及模拟方法的发展，使得计算机模拟成为除了实验和理论研究方法之外的第三个重要的研究方法。但是，由于物理凝胶化行为的复杂性，用实验和理论获得的信息很难较好地描述凝胶化过程，而计算机模拟的高度透明性及反映信息的完整性，有助于理解这一复杂过程中所涉及的物理本质。因此，利用计算机模拟结合实验及理论方法深入研究高分子物理凝胶的形成机制、结构与性能关系已成为目前最有效的手段之一。 本论文主要运用Monte Carlo模拟方法，并结合小角中子散射（Small-Angle Neutron Scattering, SANS）和流变（Rheology）等实验手段从多个角度探讨了以下几类典型的高分子溶液物理凝胶化行为。 1. 温度对遥爪型三嵌段共聚物在选择性溶剂中的自组装及凝胶化行为影响的研究：采用二维简单方格子Monte Carlo模拟方法，结合逾渗（Percolation）理论，建立了溶胶－凝胶转变相图在统计热力学中的确定方法；甄别了具有特征构象的链，讨论了链及胶束的聚集，明晰了相互作用（体现为约化温度）、构象转变、聚集与凝胶化的一致的关联关系；提出了构象转变模型，进而明确了此体系的凝胶化过程，在微观尺度上表现为桥型链和环型链之间的竞争。 2. 模拟模型改进及其应用到持续长度对稀溶液中高分子链构象影响的研究：考虑到原始八位置键涨落模型效率低，实现复杂且不能应用到复杂的高分子体系，对该模型进行了改进，使其实现简单、效率高，并拓宽了该模型的应用范围。然后，以刚性对均聚物构象的影响为例，发现随着刚性增加，均聚物构象从球形椭球到棒状椭球的转变，并对比了自由连接链（Free Joint Chain, FJC）模型和蠕虫链（Wormlike Chain, WLC）模型在不同刚性范围内对高分子链末端距预测的偏差，首次给出了这两个经典模型的半定量的适用边界。 3. 溶剂尺寸对遥爪型三嵌段共聚物在选择性溶剂中的自组装及凝胶化行为影响的研究：用改进后的八位置键涨落Monte Carlo模型，研究了遥爪型三嵌段共聚物在选择性溶剂条件下的聚集和凝胶化对溶剂尺寸的依赖性，发现溶剂尺寸效应对凝胶化的作用是非单调的。由一个均聚物体系的对比模拟证明这种作用主要是由熵驱动的，并给出了中分子溶剂的半定量定义。在均聚物和嵌段共聚物溶液中，不同尺寸的溶剂分子可以使溶液由于高分子聚集不同而具有不同的微结构，并影响高分子链构象和溶液的性质。从多个角度研究了三嵌段共聚物在不同尺寸溶剂的溶液中所遵循的三种不同的凝胶化机理。 4. 聚氧化乙烯－氧化丙稀－氧化乙烯三嵌段共聚物（poly(ethylene oxide)-poly (propylene oxide)-poly-(ethylene oxide), PEO-PPO-PEO）重水溶液凝胶化的小角中子散射（SANS）和Monte Carlo研究：结合Pluronic F127（EO65PO99EO65）/D2O三嵌段共聚物溶液的特征，对照SANS数据，用改进后的八位置键涨落模型成功地从模拟中获得了F127/D2O的溶胶－凝胶转变相图。详细地考察了体系的微观结构，提出此类高分子溶液中形成的物理凝胶包含高分子逾渗网络的生成，以及被束缚溶剂（Bound Solvent）必须超过离散组分体系逾渗的临界体积分数的机理。着重研究了一定浓度的F127水溶液随温度升高引起的溶胶－凝胶转变以及凝胶－溶胶转变的Reentrant相行为，发现体系在低温区域的溶胶－凝胶转变遵循相同的机理，而在中等温度和较高温度以及不同浓度区域中的凝胶－溶胶转变遵循不同的机理。 5. 极性基团饱和度和溶剂条件对两亲性聚合物在溶液中的聚集行为和凝胶化影响的研究：用改进后的八位置键涨落模型，针对两亲性聚合物在不同溶剂条件的溶液建立了粗粒化模型，以两亲性聚合物中极性基团的饱和度，溶剂条件和高分子浓度为变量，考察了其对链构象、聚集及其凝胶化的影响。 6. 多糖水溶液凝胶化的流变和小角中子散射研究：用流变和SANS考察了两个多糖水溶液中物理凝胶化过程，针对由氢键主导的水基凝胶体系的典型特征进行了讨论，从分子链构象，聚集体结构及其关联以及流变特征等方面对聚强电解质角叉胶（Carrageenan）水溶液和聚弱电解质明胶（Pectin）水溶液进行了详细的讨论。考察了不同多糖的种类（聚合物链的电荷密度），盐的种类和浓度，溶液温度等对凝胶化和凝胶结构的影响，分析了不同多糖溶液的凝胶化机理。

北方稻田生态系统水量平衡规律及阻渗效果研究

本研究针对北方地区的实际情况，依据水量平衡原理，采取田间试验方法，通过蒸散试验、测筒试验、阻渗试验和无阻渗条件下灌水试验，研究了3种灌水处理（淹灌、湿润灌和间歇灌）条件下水稻蒸腾、稻田棵间蒸发和稻田蒸散的变化规律，以及3种阻渗处理（薄膜阻渗、厚膜阻渗和土壤夯实阻渗）条件下稻田的阻渗效果及无阻渗条件下2种灌水处理（淹灌和间歇灌）对稻田渗漏的影响。研究结果表明：1、湿润灌处理的蒸散量与其它两种灌水处理的蒸散量具有显著差别，3种灌水处理的产量差别不显著，与淹灌相比，湿润灌处理的水分利用效率可以提高23.9～31.2％；2、3种灌水处理的水稻蒸腾量没有显著差别；3、3种灌水处理条件下的稻田棵间蒸发量，以湿润灌最小，与淹灌和间歇灌相比，分别减少38.8和26.6％的蒸发量；4、0.007mm厚的薄膜阻渗效果不明显；0.03mnl厚的厚膜处理和土壤夯实处理具有明显的阻渗效果，与对照（无阻渗）相比，可以减少23.7～47.3％渗漏量；5、无阻渗条件下，与淹灌处理相比，间歇灌水处理的渗漏量，在整个稻作生产期（包括泡田期和水稻整个生育期）内减少15.2％；6、不同阻渗处理和无阻渗条件下2种灌水处理之间的产量无显著差别，以厚膜阻渗处理和夯实处理的水分利用效率最高，无阻渗条件下淹灌处理的水分利用效率最低。

Enhancing robustness and immunization in geographical networks

We find that different geographical structures of networks lead to varied percolation thresholds, although these networks may have similar abstract topological structures. Thus, strategies for enhancing robustness and immunization of a geographical network are proposed. Using the generating function formalism, we obtain an explicit form of the percolation threshold q(c) for networks containing arbitrary order cycles. For three-cycles, the dependence of q(c) on the clustering coefficients is ascertained. The analysis substantiates the validity of the strategies with analytical evidence.

嵌入晶格的地理网络的逾渗

本文中，我们对复杂网络做了一些简单的回顾，并在这些基础的基础上对地理网络做了一些相应的研究。地理网络最近吸引了很多复杂网络研究者的注意力。我们研究了地理结构对复杂网络逾渗阈值的影响。我们发现当地理约束很弱时,地理网络一般是空间上很稀疏地连接，网络的逾渗比密集连接时更容易， 即使网络拥有抽象的拓扑结构(度分布)。也就是说稀疏地理网络拥有更高的鲁棒性。这些结果对一些真实网络中的现象给出了解释，并且对真实地理网络的建设除了最小消耗外给出了一些建议。嵌入晶格的网络模型虽然在大多数情况下并不是网络产生的真实模型(比如BA模型), 但当网络结构随时间的变化可以忽略时，它也可以很好的研究复杂网络上的动力学问题

有限核多重碎裂中的同位旋效应和液气相变

本论文介绍了原子核多重碎裂中的同位旋效应、液气相变研究的意义和现状以及当前常用的几种描述原子核液气相变的理论模型，基于同位旋相关的量子分子动力学(IQMD)模型和唯象静态模型，系统研究了有限核多重碎裂中的同位旋效应和液气相变。利用非对称核物质状态方程、IQMD模型和静态模型，研究了有限核112Sn和132Sn多重碎裂的同位旋效应以及它们对温度的依赖性。给出了在一定温度下不同密度对产生中等质量碎片和平均自由中子数/平均自由质子数的影响，发现温度较低时(5MeV)，低密区(0.01-0.04fm-3)对中等质量碎片产生的贡献大。随着温度的升高(10MeV,15MeV)，高密区域(>0.04fm-3)对中等质量碎片的产生的贡献增加。不论是在低密度区(0.01-0.04fm-3)或是在较高密度区(>0.04fm-3),如果考察自由的中子与质子的比例，则可以看出，它们与系统的同位旋有密切的关系，即在同位旋大的系统中自由中子/自由质子的比值要大于同位旋小的系统中的比值。为了寻找出核多重碎裂的临界行为信号，分析了条件矩、折合矩和组合矩及提取临界指数。采用唯象的同位旋非对称核物质状态方程和静态模型来研究热核液-气相变的临界行为，通过对核碎片的条件矩、折合矩和组合矩分析，指出了中高能重离子碰撞中形成的高温高密核在膨胀阶段存在明显的临界现象。寻找出了临界行为的信号，发现通过Zmax与S2在自然对数的对数坐标下的等高图，可以做为核发生临界现象的信号，这种现象对较重的体系会更加明显。通过线性拟合提取了临界指数，并跟其它模型提取的进行了对比，结果表明与在3D Percolation系统、Fluid系统、Au+C Fragmentation系统提取的临界指数是一致的

交替隔沟灌溉水分入渗特性

以玉米为试验材料 ,通过大田 3种灌水方式土壤水分的入渗规律比较分析 ,发现交替隔沟灌溉和固定隔沟灌溉土壤水分的侧向入渗比较明显 ,而常规灌溉由于受到相邻灌水沟侧向入渗的影响 ,土壤水分主要在土壤剖面的垂直方向变化。对 3种灌水方式湿润锋到达深度的研究表明 ,常规灌溉的湿润锋到达深度明显大于固定隔沟灌溉和交替隔沟灌溉。因此 ,田间采用交替隔沟灌溉可以减小土壤水分发生深层渗漏的机率

解集GCM输出模拟黄土塬区土壤水分平衡的潜在变化

壤水分平衡对气候变化存在着响应,在全球变化的大背景下,研究土壤水分的可能变化是气候变化影响评估中非常重要的一项内容。目标是利用经验统计方法解集GCM网格逐月的降水和温度数据,并使用建立的气候变化情景作为WEPP的输入文件评估黄土高原王东沟流域2010～2039年土壤水分平衡(土壤水分、蒸发、渗漏和蒸腾)的可能变化。结果表明,3种情景预测2010～2039年王东沟流域年均降水可能增长1.8%～17.5%,年最高温度和最低温度分别可能增长0.5～0.9℃和2.0～2.3℃。作物蒸腾变化主要在4～6月份,土壤蒸发变化主要发生在7～9月份;作物蒸腾年均变化-5%～19%,土壤水分年均变化-4%～4%,土壤蒸发年均变化-7%～7%,均为A2a减少,B2a和GGal增大;A2a的土壤水分渗漏增长最大,GGal次之,B2a基本不变。这些结果表明气候变化及其导致的作物生长变化对土壤水分平衡存在重要的影响。

One-Step Ionic Liquid-Assisted Electrochemical Synthesis of Ionic Liquid-Functionalized Graphene Sheet Directly from Graphite

Graphite, inexpensive and available in large quantities, unfortunately does not readily exfoliate to yield individual graphene sheets. Here a mild, one-step electrochemical approach for the preparation of ionic-liquid-functionalized graphite sheets with the assistance of an ionic liquid and water is presented. These ionic-liquid-treated graphite sheets can be exfoliated into functionalized graphene nanosheets that can not only be individuated and homogeneously distributed into polar aprotic solvents, but also need not be further deoxidized. Different types of ionic liquids and different ratios of the ionic liquid to water can influence the properties of the graphene nanosheets. Graphene nanosheet/polystyrene composites synthesized by a liquid-phase blend route exhibit a percolation threshold of 0.1 vol % for room temperature electrical conductivity, and, at only 4.19 vol %, this composite has a conductivity of 13.84 S m(-1), which is 3-15 times that of polystyrene composites filled with single-walled carbon nanotubes.

Critical behavior of brittle-ductile transition of polymers

We report that the brittle-ductile transition of polymers induced by temperature exhibits critical behavior. When t close to 0, the critical surface to surface interparticle distance (IDc) follows the scaling law: IDc proportional to t(-v) where t = 1 - T/T-BD(m) (T and T-BD(m) are the test temperature and brittle-ductile transition temperature of matrix polymer, respectively) and v = 2/D. It is clear that the scaling exponent v only depends on dimension (D). For 2, 3, and 4 dimension, v = 1, 2/3, and 1/2 respectively. The result indicates that the ID, follows the same scaling law as that of the correlation length (xi), when t approach to zero.

The effect of multiwall carbon nanotube on the crystallization, morphology, and rheological properties of nylon1010 nanocomposites

Nanocomposites based on poly(iminosebacoyl imino-decamethylene) (PA1010) and multiwall carbon nanotubes (MWNTs) were successfully prepared by melt blending technique. environmental scanning electron microscope micrographs of the fracture surfaces showed that not only is there an evenly dispersion of MWNTs throughout the PA1010 matrix but also a strongly interfacial adhesion with the matrix. The combined effect of more defects on MWNTs and low temperature buckling fracture is mainly responsible for the broken tubes. Differential scanning calorimeter results showed that the MWNTs acted as a nucleation agent and increased the crystallization rate and decreased crystallite size. In the linear region, rheological measurements showed a distinct change in the frequency dependence of storage modulus, loss modulus, and complex viscosity particularly at low frequencies. We conclude that the rheological percolation threshold might occur when the content of MWNTs is over 2 wt% in the composites.