Análise de novos materiais de adição para reparação naval

A crescente competitividade empresarial existente nos dias de hoje leva as empresas a adquirir uma postura diferente face ao mercado. A concorrência dos países que têm como maior trunfo a abundância de mão-de-obra barata como a China, Índia e Coreia do Sul, obriga os países ditos mais desenvolvidos a traçar uma nova estratégia. Essa estratégia passa pela diferenciação do produto em termos qualitativos, pela procura de novos materiais e técnicas de fabrico inovadoras, pela implementação de alta tecnologia aliada à constante preocupação ambiental. A Lisnave é uma empresa prestadora de serviços na área da reparação e manutenção naval, área que se tem vindo a mostrar bastante lucrativa no sector naval. Nos inúmeros serviços prestados pela empresa, o recurso a juntas soldadas é constante, levando à necessidade de se realizar um estudo de novos materiais de adição utilizados no processo de soldadura por fios fluxados autoprotegidos. Trata-se de um processo que pode funcionar em estaleiro e que permite maiores rendimentos, uma redução significativa no desperdício de material por se tratar de um consumível continuo, levando a uma redução de tempo de soldadura e consequentemente a uma redução do custo global de soldadura. Este trabalho visou estudar a soldadura em reparação naval de 2 fios consumíveis: Um fio autoprotegido (FABSHIELD XLR-8) e um fluxado (FLUXOFIL 19HD) com protecção gasosa por

Reconfigurable photonic logic architecture

The amorphous silicon photo-sensor studied in this thesis, is a double pin structure (p(a-SiC:H)-i’(a-SiC:H)-n(a-SiC:H)-p(a-SiC:H)-i(a-Si:H)-n(a-Si:H)) sandwiched between two transparent contacts deposited over transparent glass thus with the possibility of illumination on both sides, responding to wave-lengths from the ultra-violet, visible to the near infrared range. The frontal il-lumination surface, glass side, is used for light signal inputs. Both surfaces are used for optical bias, which changes the dynamic characteristics of the photo-sensor resulting in different outputs for the same input. Experimental studies were made with the photo-sensor to evaluate its applicability in multiplexing and demultiplexing several data communication channels. The digital light sig-nal was defined to implement simple logical operations like the NOT, AND, OR, and complex like the XOR, MAJ, full-adder and memory effect. A pro-grammable pattern emission system was built and also those for the validation and recovery of the obtained signals. This photo-sensor has applications in op-tical communications with several wavelengths, as a wavelength detector and to execute directly logical operations over digital light input signals.

An agent based architecture to support monitoring in plug and produce manufacturing systems using knowledge extraction

In recent years a set of production paradigms were proposed in order to capacitate manufacturers to meet the new market requirements, such as the shift in demand for highly customized products resulting in a shorter product life cycle, rather than the traditional mass production standardized consumables. These new paradigms advocate solutions capable of facing these requirements, empowering manufacturing systems with a high capacity to adapt along with elevated flexibility and robustness in order to deal with disturbances, like unexpected orders or malfunctions. Evolvable Production Systems propose a solution based on the usage of modularity and self-organization with a fine granularity level, supporting pluggability and in this way allowing companies to add and/or remove components during execution without any extra re-programming effort. However, current monitoring software was not designed to fully support these characteristics, being commonly based on centralized SCADA systems, incapable of re-adapting during execution to the unexpected plugging/unplugging of devices nor changes in the entire system’s topology. Considering these aspects, the work developed for this thesis encompasses a fully distributed agent-based architecture, capable of performing knowledge extraction at different levels of abstraction without sacrificing the capacity to add and/or remove monitoring entities, responsible for data extraction and analysis, during runtime.

Architecture and mosaics in recently discovered Palaeochristian basilicas

The excavations of the Dericik Early Christian Basilicas revealed the importance of the surrounding area of Bursa for understanding Early Christianity between the Late Roman and Early Byzantine periods. In the salvage excavations of 2001, the basic plan of the basilica (nave, narthex, presbyterium and apse) was revealed. The most important artefacts uncovered in that year were the mosaic pavements with geometric and plant ornaments and a grave located in the North Eastern corner of the church. The mosaic of the basilica was laid with the opus tessellatum technique on a thick mortar foundation with white, red, yellow, olive green and dark blue tesserae. A refrigerium scene is represented in the middle of the narthex mosaic. The mosaic in the centre of the nave is divided into parts, one of which with figures of birds inside octagons. In the transitional area between the nave and apse, three heavily damaged inscriptions have been conserved each of three or four lines, one of them indicating the wish of Epituchanos, diakôn, a church member.

Portuguese plain architecture: history opening a closed sequence

The paper will address George Kubler’s Portuguese Plain Architecture [PPA] (1972) and its effect in Portuguese architectural practice. Kubler’s philosophy of art history implied that closed sequences of objects could be opened by several reasons. Thus, it will be argued that there is an effect upon Portuguese architecture post 1974, that is apparent by the reemergence of some of the form classes treated by Kubler. This was mostly achieved through the popularity of Kubler’s book within architectural practice, scholarship and moreover by the establishment of the term “Plain Architecture��� in portuguese architectural vocabulary. Plain Architecture of the seventeenth and eighteenth centuries shared some qualities with the architecture to be built in post‑revolutionary Portugal, most importantly the effect that could be achieved with low budget buildings that were responding to a situation of crisis, and simultaneously exhaled aristocratic sparsity. The connection of PPA with the ideological attributes of early modernism and the political context of the time catalysed the reemergence of a new order of Portuguese Plain that resonates still in contemporary architecture.

Recensão: Michelangelo Sabatino, "Pride in Modesty: Modernist Architecture and the Vernacular Tradition in Italy"

Recensão de: Michelangelo Sabatino, "Pride in Modesty: Modernist Architecture and the Vernacular Tradition in Italy", Toronto: University of Toronto Press, 2011

In Search of the Origins of Modernism: Venice and the Crisis of Classical Architecture in the mid-eighteenth century

This paper attempts to prove that in the years 1735 to 1755 Venice was the birthplace and cradle of Modern architectural theory, generating a major crisis in classical architecture traditionally based on the Vitruvian assumption that it imitates early wooden structures in stone or in marble. According to its rationalist critics such as the Venetian Observant Franciscan friar and architectural theorist Carlo Lodoli (1690-1761) and his nineteenth-century followers, classical architecture is singularly deceptive and not true to the nature of materials, in other words, dishonest and fallacious. This questioning did not emanate from practising architects, but from Lodoli himself– a philosopher and educator of the Venetian patriciate – who had not been trained as an architect. The roots of this crisis lay in a new approach to architecture stemming from the new rationalist philosophy of the Enlightenment age with its emphasis on reason and universal criticism.

Semantic architecture for sensors

Based on the report for the unit “Sociology of New Information Technologies” of the Master on Computer Sciences at FCT/University Nova Lisbon in 2015-16. The responsible of this curricular unit is Prof. António Moniz

Implementação de um modelo de geometric semantic genetic programming para aplicação naval

Recaí sob a responsabilidade da Marinha Portuguesa a gestão da Zona Económica Exclusiva de Portugal, assegurando a sua segurança da mesma face a atividades criminosas. Para auxiliar a tarefa, é utilizado o sistema Oversee, utilizado para monitorizar a posição de todas as embarcações presentes na área afeta, permitindo a rápida intervenção da Marinha Portuguesa quando e onde necessário. No entanto, o sistema necessita de transmissões periódicas constantes originadas nas embarcações para operar corretamente – casos as transmissões sejam interrompidas, deliberada ou acidentalmente, o sistema deixa de conseguir localizar embarcações, dificultando a intervenção da Marinha. A fim de colmatar esta falha, é proposto adicionar ao sistema Oversee a capacidade de prever as posições futuras de uma embarcação com base no seu trajeto até à cessação das transmissões. Tendo em conta os grandes volumes de dados gerados pelo sistema (históricos de posições), a área de Inteligência Artificial apresenta uma possível solução para este problema. Atendendo às necessidades de resposta rápida do problema abordado, o algoritmo de Geometric Semantic Genetic Programming baseado em referências de Vanneschi et al. apresenta-se como uma possível solução, tendo já produzido bons resultados em problemas semelhantes. O presente trabalho de tese pretende integrar o algoritmo de Geometric Semantic Genetic Programming desenvolvido com o sistema Oversee, a fim de lhe conceder capacidades preditivas. Adicionalmente, será realizado um processo de análise de desempenho a fim de determinar qual a ideal parametrização do algoritmo. Pretende-se com esta tese fornecer à Marinha Portuguesa uma ferramenta capaz de auxiliar o controlo da Zona Económica Exclusiva Portuguesa, permitindo a correta intervenção da Marinha em casos onde o atual sistema não conseguiria determinar a correta posição da embarcação em questão.

A novel architecture of a bidirectional bridgeless interleaved converter for EV battery chargers

This paper presents a novel architecture of a bidirectional bridgeless interleaved converter for battery chargers of electric vehicles (EVs). The proposed converter is composed by two power stages: an ac-dc converter that is used to interface the power grid and the dc-link, and a dc-dc converter that is used to interface the dc-link and the batteries. The ac-dc converter is an interleaved bridgeless bidirectional boost-type converter and the dc-dc converter is a bidirectional buck-boost-type converter. The proposed converter works with sinusoidal grid current and with high power factor for all operating power levels, and in both grid-to-vehicle (G2V) and vehicle-to-grid (V2G) operation modes. In the paper is described in detail the proposed converter for EV battery chargers: the circuit topology, the principle of operation, the power control theory, and the current control strategy. Several simulation results for both G2V and V2G operation modes are presented.

The domestic architecture of Bracara Augusta and its evolution

The excavations carried out under the rescue “Project of Bracara Augusta” have generated significant amounts of data that enabled the reconstruction of Bracara Augusta urban evolution and the characterization of its buildings and blocks. This paper aims to enhance the existing data related with the domestic architecture of the roman town, which was mainly represented by the houses of domus type.

Topography of aligned PNIPAm nanogels determines cell motility and cytoskeleton architecture

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Engenharia Clínica)

The influence of the Palestinian sociocultural values in shaping the vernacular architecture of Nablus city

Recently, environmental architecture and sustainable construction has been ranked on top of the worldâ s interests. Making use of natural resources helps in reducing energy consumption and costs associated with the operation of buildings. The current architectural approaches and designs in Palestine are far away from environmental concepts, copying and simulating abroad approaches, without taking into account the culture, climate, and inhabitant's needs. On the contrast, vernacular architecture has achieved environmental concepts and has given suitable approaches and samples - without any need to simulate or copy - which come from people and land. This paper discusses how the Palestinian socio-cultural context shaped the residential vernacular architecture in Palestine, taking the old city of Nablus as a case-study. The research concept depends on analysing and trying to understand the effect of the socio-cultural context on vernacular architecture and trying to reach some rules or understandings of how it works in order to reach a modern environmental dwelling that is suitable to this concept. The research method goes through analysing study cases from the traditional architecture models and the Nablus city is selected as a case study. This analytical and qualitative method can lead to deep understanding for how to benefit from vernacular architecture in Palestine in finding the future environmental residential construction. One of the main findings of this research is to set general and special rules for building sustainable buildings in Palestine from the socio-cultural point view, in order to be a reference for designers, stakeholders, ministry of planning, and municipalities.

A modular traffic sampling architecture for flexible network measurements

Dissertação de Mestrado (Programa Doutoral em Informática)

Towards a pervasive data mining engine: architecture overview

Current data mining engines are difficult to use, requiring optimizations by data mining experts in order to provide optimal results. To solve this problem a new concept was devised, by maintaining the functionality of current data mining tools and adding pervasive characteristics such as invisibility and ubiquity which focus on their users, providing better ease of use and usefulness, by providing autonomous and intelligent data mining processes. This article introduces an architecture to implement a data mining engine, composed by four major components: database; Middleware (control); Middleware (processing); and interface. These components are interlinked but provide independent scaling, allowing for a system that adapts to the user’s needs. A prototype has been developed in order to test the architecture. The results are very promising and showed their functionality and the need for further improvements.