Ti基准晶材料制备和贮氢性能研究进展

Ti基准晶材料具有热力学稳定的正二十面体构造,表现出特殊的传输特性、贮氢特性和力学特性等,相关研究受到广泛关注.近年,作者所在研究组在Ti基准晶的制备和贮氢性能研究方面取得了一些新进展.综合报道了Ti-Zr-Ni-Cu系准晶相及其复合相材料的制备和贮氢性能.

Preparation, charactreization, and catalytic properties of Co-M-Al (M = transition metal) mixed oxides derived from hydrotalcite-like compound

Hydrotalcite-like compounds (HTLcs) CoMAlCO3, where M stands for Cr, Mn, Ni, Cu, or Fe, were synthesized by coprecipitation. After calcination at 450 degrees C, they became mixed oxides with spinel-like structure. The mixed oxides were characterized by XRD, BET, chemical analysis and the adsorption of NO. The catalytic decomposition of NO and its reduction by CO were studied over these mixed oxides. The study showed that the catalytic activity for removal of NO, was very high. The reaction mechanism is proposed and the effects of d-electrons of the transition metals on catalytic activity are elucidated.

以水滑石类化合物为前体的Co-M-Al(M=过渡金属)复合氧化物对催化消除NO_x活性的研究

以共沉淀法制得的水滑石类化合物为催化剂前体,经焙烧可得到一系列尖晶石类化合物Co-M-Al[M=Cr,Mn,Fe,Ni,Cu;n(Co):n(M):n(Al)=3:1:1].通过XRD,比表面测定,化学分析,NO吸附等方法对其进行表征,测定了此系列催化剂对NO催化还原和催化分解的活性,结果发现此系列催化剂对消除NO具有很高的活性.同时对催化消除NO的机理及过渡金属离子中d轨道电子对催化活性的影响进行了一些探讨.

电感耦合等离子体原子发射光谱测定镁-钕合金中稀土和非稀土元素

本文研究了ICP-AES测定Mg-Nd合金样品中10种元素的分析方法。选择了同时测定合金中La、Ce、Pr、Sm、Fe、Al、Mo、Ni、Cu和高含量Nd(20％)的条件。得到了满意结果。

聚(苯乙烯-4-乙烯基吡啶)钕配合物的研究

含氮聚合物是一类很有意义的配位体,它在某些反应的催化过程中起载体作用。在含氮聚合物中,聚(苯乙烯-4-乙烯基吡啶)(PS4VPY)也是一种很重要的配体,因其杂环氮原子有一定的反应能力和配位能力。聚(4VPY)过渡金属(如Co、Ni、Cu和Zn)配合物已有报道。但PS4VPY的稀土配合物未见报道。本文报道NdCl_3·PS4VPY的合成和表征,及催化活性。

三出口萃取工艺极值公式

为了缩短工艺流程,提高分离效率,许多单位都相继进行了三出口萃取分离工艺的研究。研究结果表明,三出口工艺不仅可应用于稀土元素的分离,而且还可应用于非稀土元素的分离。若采用三出口工艺分离Sm、Eu、Gd或Gd、Tb、Dy,可一次得到三个产品,即纯Sm、Gd及富Eu、或纯Gd、Dy和富Tb。由于缩短了工艺流程,从而提高了贵重稀土元素Eu和Tb的收率。三出口工艺应用于Cu、Co、Ni的分离时,可同时得到较纯的Cu、Ni及含量高于90％的Co产品,缩短了工艺流程,降低了消耗。

铜、钴、镍同时分离工艺的研究

稀土体系三种元素同时分离的工艺最近已有发表,但非稀土方面的工作尚未见报导.对Cu、Co、Ni三种元素,通常是将Cu、Co作为一个组份与Ni分离.本工作对组成为Cu:Co:Ni=1:1:1的水相合成料液设计了两种工艺,进行了串级实验,实现了该三种元素的同时分离, 串级实验以HEH(EHP)作萃取剂,煤油为稀释剂,其它试剂均用分析纯.

Formation of Fe-oxyhydroxides from the East Pacific Rise near latitude 13 degrees N: Evidence from mineralogical and geochemical data

The mineralogical and geochemical characteristics of Fe-oxyhydroxide samples from one dredge station (long. 103 degrees 54.48'W, lat. 12 degrees 42.30'N, water depth 2655 m) on the East Pacific Rise near lat 13 degrees N were analyzed by XRD, ICP-AES, and ICP-MS. Most Fe-oxyhydroxides are amorphous, with a few sphalerite microlites. In comparison with Fe-oxyhydroxides from other fields, the variable ranges in the chemical composition of Fe-oxyhydroxide samples are very narrow; their Fe, Si, and Mn contents were 39.90%, 8.92%, and 1.59%, respectively; they have high Cu (0.88%-1.85%) and Co (65x10(-6)-704x10(-6)) contents, and contain Co+Cu+Zn+Ni > 1.01%. The trace-element (As, Co, Ni, Cu, Zn, Ba, Sr) and major-element (Fe, Ca, Al, Mg) contents of these samples are in the range of hydrothermal sulfide from the East Pacific Rise near 13 degrees N, reflecting that this type of Fe-oxyhydroxide constitutes a secondary oxidation product of hydrothermal sulfide. The Fe-oxyhydroxide samples from one dredge station on the East Pacific Rise near 13 degrees N are lower in Sigma REE (5.44x10(-6)-17.01x10(-6)), with a distinct negative Ce anomaly (0.12-0.28). The Fe-oxyhydroxide samples have similar chondrite-normalized rare-earth-element (REE) patterns to that of seawater, and they are very different from the REE composition characteristics of hydrothermal plume particles and hydrothermal fluids, showing that the REEs of Fe-oxyhydroxide are a major constituent of seawater and that the Fe-oxyhydroxides can become a sink of REE from seawater. The quick settling of hydrothermal plume particles resulted in the lower REE content and higher Mn content of these Fe-oxyhydroxides, which are captured in part of the V and P from seawater by adsorption. The Fe-oxyhydroxides from one dredge station on the East Pacific Rise near 13 degrees N were formed by secondary oxidation in a low temperature, oxygenated environment. In comparison with the elemental (Zn, Cd, Pb, Fe, Co, Cu) average content of hydrothermal sulfide samples from the East Pacific Rise near 13 degrees N, the Zn, Cd, and Pb contents of the Fe-oxyhydroxides are lower, and their Fe, Co, and Cu contents are higher.

Determination of multiple trace elements in seawater using chelation ion chromatography and ICP-MS

An off-line chelation system combined with ICP-MS technique was developed for the quantitative determination of trace elements in seawater, namely V, Co, Ni, Cu, Zn, Mo, Cd, Pb, U and rare earth elements(REEs). The system was built based on an ion chromatography equipped with MetPac((R)) CC-I chelation columns which had a strong selective chelation to these target elements within a pH range 5.2-5.6. Acidified seawater samples and NH4Ac(2 mol/L) were blended to meet suitable pH before being injected into the chelation column, thus target elements were retained while alkali and alkaline metals were excluded. Then chelated elements were eluted by HNO3 (1 mol/L) and samples were collected for ICP-MS analysis. Varying the ratio of input( gen. 200 mL) to output( gen. 5 mL), the target elements which were concentrated as 40 times as their concentrations were far beyond instrumental quantification limits. At last, a certificated seawater CASS-4 was introduced and our detected values were in good agreement with those certified values.

中国河口、近岸海洋沉积物酸提取相中元素相关性及其背景值的研究

本文详细研究了黄河口（五、八月）、长江口、龙口湾、日照近海以及冀东唐海近岸海域表层沉积物中元素Zn、Pb、Ni、Cu、Co、Fe、K、Corg、Cr、Mn、P的总量和元素Zn、Cu、Pb、Co、Cr、Li、Ni、Mn、Fe、K 、Al、P的可提取量。在此基础上，着重研究了沉积物中元素总量间的相关性、元素可提取量间的相关性、元素的含量与粒度组成之间的关系、元素的总量与可提取量的关系以及可提取部分背景值等几个方面的内容。通过对不同地区不同类型的大量沉积物的研究结果表明：沉积物中元素Cu、Zn、Ni、Fe、Corg、Cr的总量在不同河口、不同类型的沉积物中与其它元素存在着显著的正相关关系。考虑到参比元素的限制条件，可以利用Ni、Fe、Corg、Cr作为参比元素，这些参比元素在不同地区、不同类型的沉积物中具有普遍性。元素Cu、Zn、Pb、Ni、Fe、K、Cr、Corg、Mn的总量与粘土含量呈显著的正相关关系。用1N HCl或0.5N HCl+H_2O_2提取沉积物，元素Cu、Zn、Pb、Co、Li、Ni、Fe、K、Al的提取量之间以及与其它元素的可提取量存在显著的正相关关系。Li、Ni、Fe、Al、Co同样可以作为参比元素，这比用总量来评价环境质量具有更方便的特点。元素Zn、Cu、Pb、Co、Li、Ni、Fe、K的可提取量与粘土含量成显著的正相关关系。与1N HC1、0.5N HCl+H_2O_2两种提取方法相比较，25%(V/V) CH_3COOH只提取了部分结合松散的金属，元素的可提取量之间以及与粘土含量之间的相关关系较差。采用不同的提取方法，元素的提取率的大小顺序与提取方法是一致的，与沉积物的区域及类型关系不明显。元素的提取率与粘土之间相关性差，说明虽然随着颗粒变细，各元素含量的绝对值增加，但相对比例变化不明显。在以上内容研究的基础上，提出了沉积物中元素可提取部分背景值的概念，这个概念具有一定的普遍性，对今后环境质量的正确评价，特别是评价对生物体影响方面，更具有重要的意义。Li、Al、K三种元素在采用提取量进行环境质量评价时，可以作为参比元素。这在以前的文献中尚没有报道，是在前人工作的基础上的又一发展。初步发现了沉积物中部分元素可提取相的元素粒度控制规律。

海洋环境中有机锡的形态分析及其代谢降解研究

有机锡化合物被广泛用作塑料制品中的稳定剂、船舶油漆的防污剂、工业催化剂、农林业杀虫杀菌剂以及用于木材的防腐保存等，已经引起严重的环境污染。世界上许多国家纷纷制定相应的法规对其使用加以禁止或限制。我国目前还没有明确的限制有机锡使用的法律法规，缺少有机锡污染的第一手资料，更没有长期的控制、监测与研究计划。由于有机锡的种类繁多，理化性质存在差别，所以在提取、分离和测定中均存在较大的困难。从我国这方面己有的工作来看，缺乏各种高选择性的分离方法和高灵敏度的检测方法是制约这项研究广泛开展的原因之一。有机锡的痕量与超痕量分析技术是当今环境和食品安全分析领域的前沿技术。 本论文利用高效液相色谱和电感耦合等离子体质谱联用技术建立了海洋环境中多种有机化合物的同时快速检测方法；发展了多种海洋环境样品中有机锡的前处理技术；研究了有机锡在海洋生物中的分布、代谢及降解过程中化学形态的变化；同时发展了海洋环境中多种痕量元素的快速检测方法。所建立的高效液相色谱和电感耦合等离子体质谱联用技术可同时、快速分析5种有机锡的形态(三甲基锡TMT、二苯基锡DPhT、二丁基锡DBT、三丁基锡TBT和三苯基锡TPhT)，其检出限均低于0.3μg/L。 用所建立方法对南海海洋生物样品中的有机锡污染进行了研究，利用SPSS软件对检测结果进行了探讨，发现在所研究海洋生物样品的97.2%中可检出丁基锡和苯基锡化合物，其浓度分布处于该化合物检出限～1487.8ng/g范围内。其中，贝类样品中总有机锡的平均浓度为416.9ng/g，远远高于鱼类样品中总有机锡的平均浓度（211.9ng/g）。海洋生物中存在高浓度的有机锡说明本海域有机锡污染严重，已经对生态环境造成了严重影响，危害到人类生活。其主要的污染源是防污涂料的应用，目前紧迫的问题是采取必要的措施来控制有机锡的使用。 本工作建立了海水样品和沉积物样品中五种有机锡的简单快速萃取方法。采用加入2%的环庚三烯酚（tropolone）的二氯甲烷CH2Cl2对海水中的有机锡进行萃取，大大提高了有机锡的萃取率，减少了萃取的时间，二苯基锡（DPhT）、二丁基锡（DBT）、三丁基锡（TBT）和三苯基锡（TPhT）的萃取率均在80%以上，仅三甲基锡（TMT）的萃取率较低（在50%左右），究其原因，可能是因为在萃取的过程中三甲基锡（TMT）产生了降解。采用流动相和0.2%环庚三烯酚酮（tropolone）对沉积物国际标准物质PACS-2进行超声萃取及高速离心后，用所建方法进行了分析。结果表明，测定值与标准值吻合。研究表明，所建立的方法可用于实际环境沉积物中有机锡的形态分析。 本文建立了流动注射与电感耦合等离子体质谱联用技术直接同时测定海水中多种痕量元素的方法。该方法采用痕量进样技术，能够有效地减少海水中Na，Mg, Ca和Cl等大量基体元素对待测痕量元素测定的干扰，减少这些元素在电感耦合等离子体采样锥上的盐沉积，可以同时测量海水中的V、Cr、Mn、Fe、Co、Ni、Cu、Zn、As、Mo、Cd、Pb，Hg和U等痕量级元素。用所建的方法测定南海海域海水中的重金属元素，发现Cd，Cr，As等有毒有害元素的污染很轻，均符合Ⅰ级海水的限量。 在海洋沉积物样品处理研究中，本工作改进了不需要赶走HF酸就可以对沉积物消解完全的密闭容器消解法，由于减少了赶走HF酸的步骤，使消解的时间由原来的二十个小时降低为十个小时，大大降低了消解的时间。采用该样品消解方法，并用ICP-MS测定了南黄海海域沉积物中锡及其他重金属元素的含量。建立了微波消解-ICP-MS测定海洋生物中锡、砷、镉、汞及铅等有害重金属元素的分析方法，并用于南黄海7个及南海海域29个海产品中的测定。测定结果表明海洋生物中上述有毒有害元素有不同程度的超标问题；不同种类，不同产地的海洋生物中重金属元素的含量有一定的差别，这些研究结果为海产品安全质量控制提供了有价值的科学信息。 在上述各章工作的基础上，本文研究了有机锡在海洋生物中的分布、代谢及降解过程，并初步建立了高效液相-电喷雾-飞行时间质谱（LC-APCI-TOF-MS）测定有机锡的方法，可对未知的有机锡化合物进行结构表征。有机锡在贝类中不同的组织显示，其内脏中有机锡的含量高于肌肉中有机锡含量。常规的煮、炸、蒸及微波的烹饪方式并不能降解海产品中的有机锡化合物。

Study on corrosion of steels in marine environment by corrosion simulation device

Three kinds of steels were studied using electrically connected hanging specimen in the corrosion simulation device and offshore long scale hanging specimen. The experimental results obtained by the two methods show that the device can better reflect the offshore corrosion environment. A Ni-Cu-P steel specimen was studied through analysis of the specimen's corrosion products and corrosion types. The surface of the samples before and after the removal of the rust layer produced by these two methods were observed and compared after some experiments. The microstructure of the corrosion products under different marine environments were analyzed and compared through IR. It indicated good correlation between the electrically connected hanging specimen method and the long scale hanging specimen method.

Study on corrosion simulation device for marine structural steel

A corrosion simulation device was studied using offshore long scale hanging specimens. An Ni-Cu-P steel specimen was studied by analysing its corrosion products and corrosion types. The appearance of the samples and the surface of the metallic substrate after the removal of the rust layer produced by these two methods were observed and compared after 470 days of exposure. The phase structure of the corrosion products under different marine environments were analysed and compared. It further indicated good correlation between the electrically connected hanging specimen method and the long scale hanging specimen method.

东天山后碰撞镁铁-超镁铁岩镍铜硫化物矿床PGE地球化学示踪与富集规律研究

Eastern Tianshan area, a Paleozoic complex trench-arc-basin system, experienced multi-period sudbuction and collision in geological history. A large number of Early Permian mafic-ultramafic intrusions emplaced along deep faults in post-collision extension tectonic stage and hosted a series of magmatic Cu-Ni sulfide deposits. This paper sets newly-discovered Tianyu magmatic Cu-Ni sulfide deposit related to small intrusion as an example. On basis of the study of ore-forming mechanism of Cu-Ni deposit, we compared PGE content and discussed enrichment mechanism and regularity of mafic-ultramafic rocks and ores in Jueluotage tectonic belt and Central Tianshan Massif. PGE and Cu, Ni, S contents correlate with each other. PGE is mainly controlled by S content.Samilar PGE distribution patterns of mafic-ultramafic show that complex originated from the same parental magma; Pd/Ir and Ni/Cu ratios indicate that high-Mg basaltic magma and deep sulfide segregation happened during magma evolution process. PGE and Cu-Ni ores are enriched in liquid sulfide and only individual samples completely control by monosulfide solid solution. Comparison of all control factors, early segregation of sulfide and quality of supply of magma may be the key factors leading to the Eastern Tianshan magmatic copper-nickel sulfide deposits don’t reach PGE grade, but we do not rule out the possibility of occurrence continuous mafic-ultramafic rocks and PGE-rich layer in deep.

攀西地区红格、新街岩体的岩石地球化学特征

The mafic-ultramafic layered intrusions in the Panxi, China contain large V-Ti-magnetite deposits. These layered intrusions are related with the Emeishan continental flood basalts in space and time. Two layered intrusions, Hongge and Xinjie have clear PGE mineralization at the base of the intrusions. Thus the detailed investigations of these two intrusions not only have a geological but also have an economic significance. This thesis aims to characterize the elemental and Sr-Nd isotopic features of diverse rock zones within the intrusion on the basis of systematic studies of the major, trace element and isotope ratios, therefore to constrain the petrogenesis, mantle source and evolution of the Hongge and Xinjie intrusions. Generally, both Hongge and Xinjie intrusions show the same Fe-Ti-rich and Si-M-poor characteristics. They are also enriched in rare-earth elements (REE) and large-ion lithophile elements (LILE) as well as in Sr-Nd isotope ratios (Hongge: initial Sr = 0.7056-0.7076, ε_(Nd)(t) and (Nd/Sm)_N-ε_(Nd)(t) plots, the Hongge intrusion has a similar elemental and isotopic features to the Emeishan low-Ti (LT) basalts, whereas the Xinjie intrusion was close to the Emeishan high-Ti (HT) basalt. Therefore, the Hongge intrusion may be co-genetic with the LT basalt, formed by the partial melting of the spinel-garnet transition mantle that had a slight enriched isotope character. In contrast, the Xinjie intrusion and the HT basalts are probably derived from the garnet-phases mantle with a primitive isotope character. The involvement of the components of mantle wedge into the source is considered to be the major reason of the REE and LILE enrichment and Nd isotope depletion in the Xinjie intrusion. In contrast with the systematic variations in TiO_2 content, Mg#, transition elements (Ni, Cu, Co), REE concentrations, and La/Yb, La/Sm ratios from the lower zone to upper zone, the different rock zones of the Hongge intrusion have no clear Sr-Nd isotope variations. This suggests that the Hongge intrusions were formed by the crystal fractionation from the same magma source. The rhythm may be formed by slow injection of the co-genetic magma during the crystal fractionation. The increase in K_2O and Al_2O_3 contents, REE abundance, and the degree of the REE fractionation in the base of the intrusion, together with the relatively low ε_(Nd)(t) value, may imply that the base of the Hongge intrusion was contaminated with the local crust rocks. Xinjie intrusion shows the clearly elemental and isotopic differences in diverse cumulus cycles. The observation of the systematic variations in TiO_2 content, Mg# value, transition elements (Ni, Cu, Co), REE concentrations, and La/Yb, La/Sm ratios in first cycle was not occurred in second cumulus cycle. In addition, the ε_(Nd)(t) value in second cumulus cycle is apparently higher than that of the first one. Thus the abruptly elemental and isotopic changes at the base of second cycle demonstrate that there is considerable new and depleted magma addition to the residue magma after the crystallization of the first cycle. These features are very similar to those of the well-known PGE-rich Bushveld and Stillwater layered intrusions. The PGE mineralization in Xinjie intrusion is much better than in Hongge intrusion. Therefore, the layered intrusion similar to the Xinjie in Panxi area posses the better prospects for the PGE deposits.