Accuracy of computer-aided design/computer-assisted manufacture (CAD/CAM) fabricated dental restorations: a comparative study

Introduction: Computer-Aided-Design (CAD) and Computer-Aided-Manufacture (CAM) has been developed to fabricate fixed dental restorations accurately, faster and improve cost effectiveness of manufacture when compared to the conventional method. Two main methods exist in dental CAD/CAM technology: the subtractive and additive methods. While fitting accuracy of both methods has been explored, no study yet has compared the fabricated restoration (CAM output) to its CAD in terms of accuracy. The aim of this present study was to compare the output of various dental CAM routes to a sole initial CAD and establish the accuracy of fabrication. The internal fit of the various CAM routes were also investigated. The null hypotheses tested were: 1) no significant differences observed between the CAM output to the CAD and 2) no significant differences observed between the various CAM routes. Methods: An aluminium master model of a standard premolar preparation was scanned with a contact dental scanner (Incise, Renishaw, UK). A single CAD was created on the scanned master model (InciseCAD software, V2.5.0.140, UK). Twenty copings were then fabricated by sending the single CAD to a multitude of CAM routes. The copings were grouped (n=5) as: Laser sintered CoCrMo (LS), 5-axis milled CoCrMo (MCoCrMo), 3-axis milled zirconia (ZAx3) and 4-axis milled zirconia (ZAx4). All copings were micro-CT scanned (Phoenix X-Ray, Nanotom-S, Germany, power: 155kV, current: 60µA, 3600 projections) to produce 3-Dimensional (3D) models. A novel methodology was created to superimpose the micro-CT scans with the CAD (GOM Inspect software, V7.5SR2, Germany) to indicate inaccuracies in manufacturing. The accuracy in terms of coping volume was explored. The distances from the surfaces of the micro-CT 3D models to the surfaces of the CAD model (CAD Deviation) were investigated after creating surface colour deviation maps. Localised digital sections of the deviations (Occlusal, Axial and Cervical) and selected focussed areas were then quantitatively measured using software (GOM Inspect software, Germany). A novel methodology was also explored to digitally align (Rhino software, V5, USA) the micro-CT scans with the master model to investigate internal fit. Fifty digital cross sections of the aligned scans were created. Point-to-point distances were measured at 5 levels at each cross section. The five levels were: Vertical Marginal Fit (VF), Absolute Marginal Fit (AM), Axio-margin Fit (AMF), Axial Fit (AF) and Occlusal Fit (OF). Results: The results of the volume measurement were summarised as: VM-CoCrMo (62.8mm3 ) > VZax3 (59.4mm3 ) > VCAD (57mm3 ) > VZax4 (56.1mm3 ) > VLS (52.5mm3 ) and were all significantly different (p presented as areas with different colour. No significant differences were observed at the internal aspect of the cervical aspect between all groups of copings. Significant differences (p< M-CoCrMo Internal Occlusal, Internal Axial and External Axial 2 ZAx3 > ZAx4 External Occlusal, External Cervical 3 ZAx3 < ZAx4 Internal Occlusal 4 M-CoCrMo > ZAx4 Internal Occlusal and Internal Axial The mean values of AMF and AF were significantly (p M-CoCrMo and CAD > ZAx4. Only VF of M-CoCrMo was comparable with the CAD Internal Fit. All VF and AM values were within the clinically acceptable fit (120µm). Conclusion: The investigated CAM methods reproduced the CAD accurately at the internal cervical aspect of the copings. However, localised deviations at axial and occlusal aspects of the copings may suggest the need for modifications in these areas prior to fitting and veneering with porcelain. The CAM groups evaluated also showed different levels of Internal Fit thus rejecting the null hypotheses. The novel non-destructive methodologies for CAD/CAM accuracy and internal fit testing presented in this thesis may be a useful evaluation tool for similar applications.

A Virtual Joystick as a Novel Interaction Modality for Surgeon-Computer Interaction During Computer-Assisted Surgical Procedures

Interacting with a computer system in the operating room (OR) can be a frustrating experience for a surgeon, who currently has to verbally delegate to an assistant every computer interaction task. This indirect mode of interaction is time consuming, error prone and can lead to poor usability of OR computer systems. This thesis describes the design and evaluation of a joystick-like device that allows direct surgeon control of the computer in the OR. The device was tested extensively in comparison to a mouse and delegated dictation with seven surgeons, eleven residents, and five graduate students. The device contains no electronic parts, is easy to use, is unobtrusive, has no physical connection to the computer and makes use of an existing tool in the OR. We performed a user study to determine its effectiveness in allowing a user to perform all the tasks they would be expected to perform on an OR computer system during a computer-assisted surgery. Dictation was found to be superior to the joystick in qualitative measures, but the joystick was preferred over dictation in user satisfaction responses. The mouse outperformed both joystick and dictation, but it is not a readily accepted modality in the OR.

Computer in Unterricht und Ausbildung. Neue Anforderungen an Lehrer, Ausbilder und Trainer?

Die Nützlichkeit des Einsatzes von Computern in Schule und Ausbildung ist schon seit einigen Jahren unbestritten. Uneinigkeit herrscht gegenwärtig allerdings darüber, welche Aufgaben von Computern eigenständig wahrgenommen werden können. Bewertet man die Übernahme von Lehrfunktionen durch computerbasierte Lehrsysteme, müssen häufig Mängel festgestellt werden. Das Ziel der vorliegenden Arbeit ist es, ausgehend von aktuellen Praxisrealisierungen computerbasierter Lehrsysteme unterschiedliche Klassen von zentralen Lehrkompetenzen (Schülermodellierung, Fachwissen und instruktionale Aktivitäten im engeren Sinne) zu bestimmen. Innerhalb jeder Klasse werden globale Leistungen der Lehrsysteme und notwendige, in komplementärer Relation stehende Tätigkeiten menschlicher Tutoren bestimmt. Das dabei entstandene Klassifikationsschema erlaubt sowohl die Einordnung typischer Lehrsysteme als auch die Feststellung von spezifischen Kompetenzen, die in der Lehrer- bzw. Trainerausbildung zukünftig vermehrt berücksichtigt werden sollten. (DIPF/Orig.)

Exploring the learning potential of an artificial life simulation

CULTURE is an Artificial Life simulation that aims to provide primary school children with opportunities to become actively engaged in the high-order thinking processes of problem solving and critical thinking. A preliminary evaluation of CULTURE has found that it offers the freedom for children to take part in process-oriented learning experiences. Through providing children with opportunities to make inferences, validate results, explain discoveries and analyse situations, CULTURE encourages the development of high-order thinking skills. The evaluation found that CULTURE allows users to autonomously explore the important scientific concepts of life and living, and energy and change within a software environment that children find enjoyable and easy to use.

Projecte interactiu "Vila-moguda"

La idea inicial va ser la de crear un interactiu multimèdia amb finalitat didàctica que gira entorn els trastorns per dèficit d'atenció.Està adreçat a nens en edat escolar. Com a part principal hi ha una sèrie d'activitatsindicades per a potenciar la concentració i motivar a acabar allò que comença, així comdiversa informació sobre el transtorn i consells sobre activitats a realitzar per treballar les carències d'aquests nens/es.

JWQ : Java WebQuest

L¿objectiu principal d¿aquest projecte és el de donar resposta a la necessitat de uncol·lectiu de professors i alumnes de magisteri de disposar d¿una eina de pràctiques per larealització de WebQuests.

Diseño y prototipo de un sistema de eventos para dispositivos móviles en el trabajo en grupo

El present treball de fi de carrera té com a objectiu la conceptualització, disseny i prototip d'un sistema d'esdeveniments per a dispositius mòbils que permetin la comunicació entre Universitat, Docent i Alumne independentment de l'espai físic i temporal de qualsevol d'aquests actors, utilitzant per a això els dispositius mòbils i smartphones d'àmplia presència i ús.

Implantación de Software Libre en el Centro de Desarrollo Infantil (CENDI) No. 4

El presente proyecto consiste en la implantación de Software Libre en el Centro de Desarrollo Infantil (CENDI) No. 4, que es un centro de educación infantil de niños de 0 a 6 años con equipos antiguos de recursos limitados, de forma que se incorporen programas que sean adecuados a la edad de los niños, y además el profesorado pueda aprovechar los ordenadores, todo ello con el menor coste posible, debido a que el presupuesto del centro es muy limitado.

Criteria for ICT-supported Higher Education Teachers Training

Aquest document pretén recollir aportacions teòriques sobre les pràctiques pedagògiques que incorporen i promouen l'ús de les TIC per tal de definir els criteris per al disseny de la formació dels professors d'educació superior en les TIC.

Analysis of teachers training for ICT Higher Education

Aquest document pretén recollir aportacions teòriques i pràctiques sobre les pràctiques pedagògiques que incorporen i promouen l'ús de les TIC per tal d'aclarir, facilitar i fer coherent el disseny de la formació dels professors d'educació superior en les TIC. El seu propòsit és trobar alternatives de formació que compleixin amb les necessitats educatives del professor, així com per superar o atenuar les dificultats i/o la manca de voluntat a les quals s'enfronta en la pràctica educativa en introduir aplicacions de les TIC.

Transnational study of roles/functions and associated ICT competencies for Higher Education teachers

Aquest estudi forma part del projecte eLene-TLC1 Virtual Campus (2007-2008) recolzat pel programa eLearning de la Comissió Europea. L'objectiu d'aquest projecte és que els professors i els estudiants facin el millor ús possible de les TIC en l'educació superior, preparant als professors per als estudiants de la generació xarxa, permetent als estudiants a la transferència de coneixements i pràctiques de la vida quotidiana per al seu aprenentatge i estimular tant la integració plena de pràctiques innovadores d'ensenyament i d'aprenentatge possibilitades per un entorn tecnològic en constant evolució. Per tal de cobrir part d'aquest objectiu general, es va concebre un estudi per examinar les competències en TIC professors d'Educació Superior en entorns d'aprenentatge en línia.

PERSONAL(ONTO) : Personalizing the Learning Process in Virtual Environments by means of Adaptive Formative Itineraries based on Reusable Learning Objects and Ontologies TIN2006-15107-C02

Personalization in e-learning allows the adaptation of contents, learning strategiesand educational resources to the competencies, previous knowledge or preferences of the student. This project takes a multidisciplinary perspective for devising standards-based personalization capabilities into virtual e-learning environments, focusing on the conceptof adaptive learning itinerary, using reusable learning objects as the basis of the system and using ontologies and semantic web technologies.

A Classification of Tools for Learning Logic

A table showing a comparison and classification of tools (intelligent tutoring systems) for e-learning of Logic at a college level.

A teaching/learning support tool for introductory programming courses

In This work we present a Web-based tool developed with the aim of reinforcing teaching and learning of introductory programming courses. This tool provides support for teaching and learning. From the teacher's perspective the system introduces important gains with respect to the classical teaching methodology. It reinforces lecture and laboratory sessions, makes it possible to give personalized attention to the student, assesses the degree of participation of the students and most importantly, performs a continuous assessment of the student's progress. From the student's perspective it provides a learning framework, consisting in a help environment and a correction environment, which facilitates their personal work. With this tool students are more motivated to do programming