Biossorção de lantânio por Sargassum sp.: ensaios em batelada e contínuos

Diante dos avanços tecnológicos, pesquisadores têm intensificado a busca por métodos de remoção de metais, que tragam bons resultados de captação a partir de efluentes contaminados, aliados a um baixo custo. A utilização de materiais biológicos como algas marinhas, fungos e bactérias vem se destacando e se tornando uma solução atrativa quando comparados com os tratamentos químicos convencionais; essa técnica é denominada biossorção. A biossorção é um processo de captação de íons metálicos de uma solução, a partir de interações entre o metal e determinados sítios ativos presentes na parede celular da biomassa. Existe também um crescente interesse pelo estudo dos elementos de terras raras (TR) por possuirem alto valor agregado, acarretado por processos caros e de alta complexidade na sua separação e purificação. Desta forma, este trabalho teve como objetivo descrever o potencial de biossorção de lantânio - um representante dos TR - pela macroalga Sargassum sp., a partir de soluções aquosas. Para isso foram realizados estudos em batelada, aplicando modelos cinéticos e de equilíbrio, e estudos em regime contínuo de biossorção dos íons de lantânio (III), além de um sistema contínuo bimetálico, no qual houve a adição do metal cério, outro TR. As determinações analíticas foram realizadas por espectrometria de emissão ótica por plasma indutivamente acoplado. Os ensaios cinéticos foram realizados nas concentrações metálicas de 10 e 100 mg.L-1 e em duas concentrações distintas de biomassa 2 e 5 g.L-1 na temperatura de 301C. Dois modelos cinéticos foram testados, pseudo-primeira ordem e segunda ordem, tendo o modelo de segunda ordem apresentado melhor ajuste dos dados, com r2 igual a 0,9697. No ensaio de equilíbrio foi construída a isoterma que apresentou um perfil crescente na captação no entanto não alcançou a remoção máxima. Os modelos de Langmuir e Freundlich foram utilizados para ajustar os dados da isoterma, sendo verificado maior correlação dos dados com o modelo de Langmuir; resultando num valor de captação máxima calculado pelo modelo de 3,55 mmol.g-1. No ensaio dinâmico foram realizados dois experimentos, 1 e 2. O Experimento 1 foi realizado com três colunas interligadas e recheadas com 20g de biomassa cada, sendo bombeada uma solução aquosa de lantânio na concentração de 1,41mmol.L-1. O Experimento 2 foi constituido de uma solução contendo lantânio e cério ambos na mesma concentração anterior de 1,41 mmol.L-1, sendo bombeada somente para uma única coluna recheada com 20g de biomassa. Os resultados demonstraram que o ponto de saturação não foi atingido dentro das 8 horas em que se deu o processo, o que indica a alta afinidade da Sargassum sp. pelo lantânio e que a presença do cério associada a redução da vazão prejudicou a captação do lantânio

Interações do lantânio e cério com microalgas dos gêneros Monoraphidium e Scenedesmus

Os elementos de terras raras, representados em sua maioria pelos lantanídeos, ocorrem principalmente como constituintes-traço da maioria dos minerais de rochas comuns (monazita, apatita) e também estão presentes em alguns minérios. Tais elementos foram largamente usados por décadas como fertilizantes na China. Na área das inovações tecnológicas, a demanda por esses metais vem crescendo por conta das suas aplicações em diversos campos. Consequentemente, grandes quantidades desses elementos são acumulados em ambientes aquáticos atingindo o fitoplâncton. Assim, as microalgas que são organismos ecologicamente importantes na cadeia alimentar têm sido frequentemente usadas em estudos ambientais para avaliar a toxicidade relativa de várias descargas químicas e são largamente estudadas na detecção dos primeiros impactos no ecossistema. Somado a isso, são biomassas que possuem boa capacidade de biossorção de metais devido à presença de ligantes na sua estrutura que promovem a captação deles quando em solução. Dessa forma, as interações entre as microalgas verdes Monoraphidium e Scenedesmus e os íons La3+ e Ce3+ foram investigadas neste trabalho. Para isso, foram avaliados o efeito tóxico e a bioacumulação do La3+ pelas duas microalgas verdes. Adicionalmente, estudos em batelada da biossorção do La3+ e Ce3+ em soluções contendo os elementos isoladamente ou em combinação foram realizados. No estudo de toxicidade e de bioacumulação o meio de cultivo utilizado foi o ASM-1, com e sem presença de La3+ (10 mg.L-1 a 100 mg.L-1), onde o efeito tóxico do metal foi monitorado por análises micro e macroscópica das células e também pela quantificação do crescimento celular baseada em medidas da massa seca. A bioacumulação do metal foi avaliada da mesma forma para ambas as microalgas. Os resultados obtidos mostraram que o efeito tóxico do metal foi presente em concentrações iônicas de 50 e 100 mg.L-1 e que houve uma bioconcentração do La3+ em ambas espécies de microalgas, principalmente quando a concentração inicial do La3+ foi de 10 e 25 mg.L-1, mostrando que houve uma relação direta entre a bioconcentração e a toxicidade do La3+. O gênero Monoraphidium bioconcentrou mais metal que o gênero Scenedesmus. Os resultados da biossorção dos metais em solução monoelementar mostraram que as microalgas apresentaram grande capacidade de captação do La3+ (20,7 mmol.g-1 para Monoraphidium sp. e 17,8 mmol.g-1 para Scenedesmus sp.) e do Ce3+ (25,7 mmol.g-1 para Monoraphidium sp. e 11,5 mmol.g-1 para Scenedesmus sp.). Os resultados obtidos revelaram que os dados melhor se ajustaram ao modelo de Freundlich, na maioria dos casos. Em sistema binário, notou-se que houve uma menor captação de cada um individualmente, evidenciando uma competição entre eles pelos mesmos sítios ligantes e que ambas apresentaram maior afinidade pelo Ce3+

Tests for conceptual design of 6.6 kV class superconducting fault current limiter with YBCO thin film elements

A superconducting fault current limiter (SFCL) for 6.6 kV and 400 A installed in a cubicle for a distribution network substation was conceptually designed. The SFCL consists of parallel- and series-connected superconducting YBCO elements and a limiting resistor. Before designing the SFCL, some tests were carried out. The width and length of each element used in the tests are 30 mm and 210 mm, respectively. The element consists of YBCO thin film of about 200 nm in thickness on cerium dioxide (CeO2) as a cap-layer on a sapphire substrate by metal-organic deposition with a protective metal coat. In the tests, characteristics of each element, such as over-current, withstand-voltage, and so on, were obtained. From these characteristics, series and parallel connections of the elements, called units, were considered. The characteristics of the units were obtained by tests. From the test results, a single phase prototype SFCL was manufactured and tested. Thus, an SFCL rated at 6.6 kV and 400 A can be designed. © 2009 IEEE.

Growth of CeO2 : Bi12SiO20 crystals in multi-position furnace(II) - Space growth experiment

Ce-doped Bi12SiO20 single crystal with size of phi10mm x 40mm was successfully grown in space on board of the spacecraft Shenzhou No.3. The surface morphology of space-grown crystal is different from that of ground-grown crystal The space- and ground-grown crystals were measured by X-ray rocking curves, absorption spectra and micro-Raman spectra. The results show that the quality of Ce-deped crystal grown in space is better than that of the ground-grown one. The effect of doping on optical properties of BSO grown in space is evident in comparison with the ground-grown crystal.

Violet/blue photoluminescence from CeO2 thin film

CeO2 thin film was fabricated by dual ion beam epitaxial technique. The violet/blue PL at room temperature and lower temperature was observed from the CeO2 thin film. After the analysis of crystal structure and valence in the compound was carried out by the XRD and XPS technique, it was inferred that the origin of CeO2 PL was due to the electrons transition from Ce4f band to O2p band and the defect level to O2p band. And these defects levels were located in the range of 1 eV around Ce4f band.

A study of the interface of CeO2/Si heterostructure grown by ion beam deposition

Epitaxial cerium dioxide films on single-crystal silicon substrates (CeO2/Si) have been grown by a dual mass-analyzed low-energy ion beam deposition (IBD) system. By double-crystal X-ray diffraction (XRD), Full Width at Half Maximum (FWHM) are 23' and 33' in the rocking curves for (222) and (111) faces of the CeO2 film, respectively, and the lattice-mismatch Delta a/a with the substrate is about - 0.123%. The results show that the CeO2/Si grown by IBD is of high crystalline quality. In this work, the CeO2/Si heterostructure were investigated by X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) measurements. Especially, XPS and AES depth profiling was used to analyze the compositions and structures in the interface regions of the as-grown and post-annealed CeO2/Si. It was found that there was no silicon oxide in the interface region of the as-grown sample but silicon oxide in the post-annealed sample. The reason for obtaining such high quality heterostructure mainly depends on the absence of silicon oxide in the surface at the beginning of the deposition. (C) 1998 Elsevier Science Ltd. All rights reserved.

Synthesis Gas Generation by Chemical-Looping Reforming Using Ce-Based Oxygen Carriers Modified with Fe, Cu, and Mn Oxides

Chemical-looping reforming (CLR) is a technology that can be used for partial oxidation and steam reforming of hydrocarbon fuels. It involves the use of a metal oxide as an oxygen carrier, which transfers oxygen from combustion air to the fuel. Composite oxygen carriers of cerium oxide added with Fe, Cu, and Mn oxides were prepared by co-precipitation and investigated in a thermogravimetric analyzer and a fixed-bed reactor using methane as fuel and air as oxidizing gas. It was revealed that the addition of transition-metal oxides into cerium oxide can improve the reactivity of the Ce-based oxygen carrier. The three kinds of mixed oxides showed high CO and H-2 selectivity at above 800 degrees C. As for the Ce-Fe-O oxygen carrier, methane was converted to synthesis gas at a H-2/CO molar ratio close to 2:1 at a temperature of 800-900 degrees C; however, the methane thermolysis reaction was found on Ce-Cu-O and Ce-Mn-O oxygen carriers at 850-900 degrees C. Among the three kinds of oxygen carriers, Ce-Fe-O presented the best performance for methane CLR. On Ce-Fe-O oxygen carriers, the CO and H-2 selectivity decreased as the Fe content increased in the carrier particles. An optimal range of the Ce/Fe molar ratio is Ce/Fe > 1 for Ce-Fe-O oxygen carriers. Scanning electron microscopy (SEM) analysis revealed that the microstructure of the Ce-Fe-O oxides was not dramatically changed before and after 20 cyclic reactions. A small amount of Fe3C was found in the reacted Ce-Fe-O oxides by X-ray diffraction (XRD) analysis.

氟碳铈矿分离过程中的氧化问题及工艺改进

针对Cyanex 923萃取分离铈、钍、稀土过程中Ce(IV)在萃取过程中被有机相中的还原性物质还原的问题，提出采用高锰酸钾氧化萃余水相中的Ce(III)。研究结果表明，在酸性条件下，高锰酸钾能有效的氧化水相中的Ce(III)，但在萃取过程中，高锰酸根会先于Ce（IV）被萃入到有机相中，从而失去氧化Ce(III)的能力，由此提出氧化过程必须无含Cyanex 923有机相存在并参与设计了一套油水分离氧化装置。经过高锰酸钾氧化后，萃余水相中铈可低于0.5g/L，铈收率达到98%。 针对攀西氟碳铈矿新流程中直接制备的纳米级氟化铈，考察了氟化铈的紫外吸收性能，发现其在254nm处有特征吸收峰，还考察了分散剂的极性强弱、分散物浓度、粒径、温度及表面包覆等因素对紫外吸收性能的影响；发现随着粒径的减小，紫外吸收峰发生明显的红移；经TiO2包覆后CeF3的紫外吸光域范围扩展。 研究了Cyanex 923与P204组成的双溶剂萃取体系及其单独体系萃取Ce(IV)、F及Ce(IV)-F混液的热力学性质，得出了协同萃取机理，获得了萃取平衡方程式以及协萃物的组成。研究发现混合体系对Ce(IV)及Ce(IV)-F混液中的Ce、F均有明显的协萃作用，这为该萃取体系应用于现实分离中提供了可靠的保证。 在上述工作的基础上，提出了Cyanex 923与P204组成的双溶剂萃取体系分离攀西氟碳铈矿的新清洁冶金流程。对影响这一流程的化学因素进行了系统研究，并给出了工艺运行参数。

High quality CeO2 film grown on Si(111) substrate by using low energy dual ion beam deposition technology

By using the mass-analyzed low energy dual ion beam deposition technique, a high quality epitaxial, insulating cerium dioxide thin film with a thickness of about 2000 Angstrom, has been grown on a silicon (111) substrate. The component species, cerium and oxygen, are homogeneous in depth, and have the correct stoichiometry for CeO2. X-ray double-crystal diffraction shows that the full width at half maximum of the (222) and (111) peaks of the film are less than 23 and 32 s, respectively, confirming that the film is a perfect single crystal. (C) 1995 American Institute of Physics.

Micro Insert: A Prototype Full-Ring PET Device for Improving the Image Resolution of a Small-Animal PET Scanner

A full-ring PET insert device should be able to enhance the image resolution of existing small-animal PET scanners. Methods: The device consists of 18 high-resolution PET detectors in a cylindric enclosure. Each detector contains a cerium-doped lutetium oxyorthosilicate array (12 x 12 crystals, 0.72 x 1.51 x 3.75 mm each) coupled to a position-sensitive photomultiplier tube via an optical fiber bundle made of 8 x 16 square multiclad fibers. Signals from the insert detectors are connected to the scanner through the electronics of the disabled first ring of detectors, which permits coincidence detection between the 2 systems. Energy resolution of a detector was measured using a Ge-68 point source, and a calibrated 68Ge point source stepped across the axial field of view (FOV) provided the sensitivity profile of the system. A Na-22 point source imaged at different offsets from the center characterized the in-plane resolution of the insert system. Imaging was then performed with a Derenzo phantom filled with 19.5 MBq of F-18-fluoride and imaged for 2 h; a 24.3-g mouse injected with 129.5 MBq of F-18-fluoride and imaged in 5 bed positions at 3.5 h after injection; and a 22.8-g mouse injected with 14.3 MBq of F-18-FDG and imaged for 2 h with electrocardiogram gating. Results: The energy resolution of a typical detector module at 511 keV is 19.0% +/- 3.1 %. The peak sensitivity of the system is approximately 2.67%. The image resolution of the system ranges from 1.0- to 1.8-mm full width at half maximum near the center of the FOV, depending on the type of coincidence events used for image reconstruction. Derenzo phantom and mouse bone images showed significant improvement in transaxial image resolution using the insert device. Mouse heart images demonstrated the gated imaging capability of the device. Conclusion: We have built a prototype full-ring insert device for a small-animal PET scanner to provide higher-resolution PET images within a reduced imaging FOV. Development of additional correction techniques are needed to achieve quantitative imaging with such an insert.

The microstructure and mechanical properties of Mg-3Al-3RE alloys

The Mg-3Al-3RE alloys (RE, the cerium-rich or the yttrium-rich misch metal) were smelted in a resistance furnace under the protective flux from the Mg-RE master alloys and pure magnesium ingots. The microstructure and mechanical properties of samples prepared by steel mould casting method were investigated.

Influence of the deposition energy on the composition and thermal cycling behavior of La-2(Zr0.7Ce0.3)(2)O-7 coatings

Lanthanum-zirconium-cerium composite oxide (La-2(Zr0.7Ce0.3)(2)O-7, LZ7C3) coatings were prepared under different conditions by electron beam-physical vapor deposition (EB-PVD). The composition, crystal structure, surface and cross-sectional morphologies, cyclic oxidation behavior of these coatings were studied. Elemental analysis indicates that the coating composition has partially deviated from the stoichiometry of the ingot, and the existence of excess La2O3 is also observed.

The influence of mischmetal and tin on the microstructure and mechanical properties of Mg-6Zn-5Al-based alloys

The influence of the addition of mischmetal (MM) and tin (Sn) (total content of mischmetal and tin = 4 wt.%) on the microstructure, aging behavior and mechanical properties of Mg-6Zn-5Al-based alloys has been investigated. The microstructure of the as-cast alloys consists of alpha-Mg. Mg-32(Al,Zn)(49), Al2Mg5Zn2, Mg2Sn and Al2MMZn2 phases, and the morphology of these intermetallic phases varies with different MM and Sri additions.

PtCeOx/C as a novel methanol-tolerant electrocatalyst of oxygen reduction for direct methanol fuel cells

A prominent methanol-tolerant characteristic of the PtCeOx/C electrocatalyst was found during oxygen reduction reaction process. The carbon-supported platinum modified with cerium oxide (PtCeOx/C) as cathode electrocatalyst for direct methanol fuel cells was prepared via a simple and effective route. The synthesized electrocatalysts were characterized by X-ray diffraction and transmission electron microscopy. It was found that the cerium oxide within PtCeOx/C present in an amorphous form on the carbon support surface and the PtCeOx/C possesses almost similar disordered morphological structure and slightly smaller particle size compared with the unmodified Pt/C catalyst.