Identification of the Emerging Issues in Recycled Fiber Processing

The objectives of this research work “Identification of the Emerging Issues in Recycled Fiber processing” are discovering of emerging research issues and presenting of new approaches to identify promising research themes in recovered paper application and production. The projected approach consists of identifying technological problems often encountered in wastepaper preparation processes and also improving the quality of recovered paper and increasing its proportion in the composition of paper and board. The source of information for the problem retrieval is scientific publications in which waste paper application and production were discussed. The study has exploited several research methods to understand the changes related to utilization of recovered paper. The all assembled data was carefully studied and categorized by applying software called RefViz and CiteSpace. Suggestions were made on the various classes of these problems that need further investigation in order to propose an emerging research trends in recovered paper.

Surgical Treatment of Colorectal Cancer. Controversial Issues

Aims: This study was carried out to evaluate surgical treatment of colorectal cancer (CRC) with special interest in present status and controversial issues: stenting as a palliative procedure for metastasized CRC (I), duration of thromboprophylaxis after the surgical treatment of CRC (II), treatment of the increasing population of elderly people (III) and the quality of life (QoL) after surgery for rectal cancer with special reference to pelvic floor dysfunction (IV). Materials and methods: The material consisted of patients with CRC operated on at Turku University Hospital between 2003 and 2008. In study II the data was collected retrospectively from electronic archives. In other studies the follow-up data was collected at postoperative control visits. In study IV the RAND-36 standardized questionnaire and additional questions assessing urinary, sexual and anorectal dysfunction were used. Results: The results of the current study showed that self-expanding metallic stents provided an alternative to palliative surgery in the treatment of obstructive CRC. Low molecular heparin given s.c. for a median of 11 days until hospital discharge seemed to provide sufficient thromboprophylaxis after surgery. With preoperative selection elderly patients with rectal cancer were suitable for major surgery for rectal cancer with morbidity and mortality rates comparable to those in younger patients. There was no difference between preoperative and one year postoperative general QoL for operated rectal cancer patients. Postoperative pelvic dysfunction was associated with an impaired QoL in some dimensions. Conclusions: Many individual factors regarding the patient and the disease must be taken into account when making treatment decisions in CRC to ensure successful treatment of CRC, patient satisfaction and QoL.

Survival and Quality of Life among Patients with Severe Lower Extremity Peripheral Arterial Disease

Lower extremity peripheral arterial disease (PAD) is associated with decreased functional status, diminished quality of life (QoL), amputation, myocardial infarction, stroke, and death. Nevertheless, public awareness of PAD as a morbid and mortal disease is low. The aim of this study was to assess the incidence of major lower extremity amputation due to PAD, the extent of reamputations, and survival after major lower extremity amputation (LEA) in a population based PAD patient cohort. Furthermore, the aim was to assess the functional capacity in patients with LEA, and the QoL after lower extremity revascularization and major amputation. All 210 amputees due to PAD in 1998–2002 and all 519 revascularized patients in 1998–2003 were explored. 59 amputees alive in 2004 were interviewed using a structured questionnaire of QoL. Two of each amputee age-, gender- and domicile-matched controls filled in and returned postal self-administered QoL questionnaire as well as 231 revascularized PAD patients (the amount of these patients who engaged themselves to the study), and one control person for each patient completed postal self-administered QoL questionnaire. The incidence rate of major LEA was 24.1/100 000 person-years and it was considerably high during the years studied. The one-month mortality rate was 21%, 52% at one-year, and the overall mortality rate was 80%. When comparing the one-year mortality risk of amputees, LEAs were associated with a 7.4-fold annual mortality risk compared with the reference population in Turku. Twenty-two patients (10%) had ipsilateral transversions from BK to AK amputation. Fifty patients (24%) ended up with a contralateral major LEA within two to four amputation operations. Three bilateral amputations were performed at the first major LEA operation. Of the 51 survivors returning home after their first major LEA, 36 (71%) received a prosthesis; (16/36, 44%) and were able to walk both in- and outdoors. Of the 68 patients who were discharged to institutional care, three (4%) had a prosthesis one year after LEA. Both amputees and revascularized patients had poor physical functioning and significantly more depressive symptoms than their controls. Depressive symptoms were more common in the institutionalized amputees than the home-dwelling amputees. The surviving amputees and their controls had similar life satisfaction. The amputees felt themselves satisfied and contented, whether or not they lived in long-term care or at home. PAD patients who had undergone revascularizations had poorer QoL than their controls. The revascularized patients’ responses on their perceived physical functioning gave an impression that these patients are in a declining life cycle and that revascularizations, even when successful, may not be sufficient to improve the overall function. It is possible that addressing rehabilitation issues earlier in the care may produce a more positive functional outcome. Depressive symptoms should be recognized and thoroughly considered at the same time the patients are recovering from their revascularization operation. Also primary care should develop proper follow-up, and community organizations should have exercise groups for those who are able to return home, since they very often live alone. In rehabilitation programs we should consider not only physical disability assessment but also QoL.

Health-related quality of life in school children: validation of instrument, child self assessment, parent-proxy assessment and school nursing documentation of health check-ups

The aims of this study were to validate an international Health-Related Quality of Life (HRQL) instrument, to describe child self and parent-proxy assessed HRQL at child age 10 to 12 and to compare child self assessments with parent-proxy assessments and school nursing documentation. The study is part of the Schools on the Move –research project. In phase one, a cross-cultural translation and validation process was performed to develop a Finnish version of Pediatric Quality of Life Inventory™ 4.0 (PedsQL™ 4.0). The process included a two-way translation, cognitive interviews (children n=7, parents n=5) and a survey (children n=1097, parents n=999). In phase two, baseline and follow-up surveys (children n=986, parents n=710) were conducted to describe and compare the child self and parent-proxy assessed HRQL in school children between the ages 10 and 12. Phase three included two separate data, school nurse documented patient records (children n=270) and a survey (children n=986). The relation between child self assessed HRQL and school nursing documentation was evaluated. Validity and reliability of the Finnish version of PedsQL™ 4.0 was good (Child Self Report α=0.91, Parent-Proxy Report α=0.88). Children reported lower HRQL scores at the emotional (mean 76/80) than the physical (mean 85/89) health domains and significantly lower scores at the age of 10 than 12 (dMean=4, p=<0.001). Agreement between child self and parent-proxy assessment was fragile (r=0,4, p=<0.001) but increased as the child grew from age 10 to 12 years. At health check-ups, school nurses documented frequently children’s physical health, such as growth (97%) and posture (98/99%) but seldom emotional issues, such as mood (2/7%). The PedsQLTM 4.0 is a valid instrument to assess HRQL in Finnish school children although future research is recommended. Children’s emotional wellbeing needs future attention. HRQL scores increase during ages between childhood and adolescence. Concordance between child self and parent-proxy assessed HRQL is low. School nursing documentation, related to child health check-ups, is not in line with child self assessed HRQL and emotional issues need more attention.

Health Related Quality of Life after Childhood Cancer - A Finnish Nationwide survey

The purpose of this Finnish epidemiological nationwide cross-sectional study was to evaluate the Health Related Quality of Life (HRQL) of young people that have survived childhood cancer at least four years after cancer diagnosis. The study aims were (1) to increase knowledge and understanding about the relationship between childhood cancer and its treatment and HRQL of childhood cancer survivors and (2) to identify survivors who need and could benefit from ongoing long-term follow-up, as well as (3) to identify what kind of aftercare the childhood cancer survivors will possibly need. HRQL and fatigue of currently still young survivors of extracranial childhood malignancies were evaluated with self-reports and parent proxy reports. HRQL was measured with age-appropriate generic instruments: PedsQL™, SF-36, 15D, 16D and 17D. Fatigue for children and adolescents aged below 18 years was measured with the PedsQL™ Multidimensional Fatigue Scale Finnish version. PedsQL™ parent-proxy and the PedsQL™ Multidimensional Fatigue Scale Parentproxy instruments were used to assess the perception of the parents on HRQL and fatigue of their children and adolescents. Postal-survey questionnaires were mailed to 852 childhood cancer survivors aged 11-27 years and their randomly selected gender-, age and living-place matched controls, as well as under 18-year-old children´s parents. A total of 474 survivors, 595 controls, 209 survivor’s parent and 253 control’s parent replied. The mean age of survivors at the time of the study was 18.4 years. The mean length of survival was 12.3 years, and the mean age at diagnosis 5.5 years. The most of the Finnish childhood cancer survivors evaluated that their HRQL as good. Survivors rated their HRQL equal or higher than their controls. The only dimension where the survivors scored poorer than the controls was the 15D mobility dimension. Survivors of childhood cancer did not suffer from significant fatigue. There were subgroups of childhood cancer survivors who had poorer level of HRQL, and suffered from fatigue more than the reference group. The demographic factors that associated with poorer HRQL were female gender, greater weight, living alone, need of remedial education, an additional non-cancer diagnosis, survivors with siblings, and self-reported unhappiness. Disease-related factors that associated with poorer HRQL were higher age at the time of diagnosis, the diagnosis of Wilms tumor, neuroblastoma, or osteosarcoma, and treatment with stem cell transplantation. The factors associated with more fatigue in survivors were male gender, older age at evaluation, the need of remedial education at school, lower overall average grade in the latest school marks report, length of survival more than 10 years, lower HRQL-scores, and a sarcoma diagnosis. However, all the used demographic and disease related factors explained only about one third of the variation in the HRQL scores. In open questions, the survivors were most worried about their physical health, but were also worried about their mental health, cancer inheritance, late-effects, and fertility and relapse issues. It seems that there are subgroups of survivors who need and could benefit from ongoing long-term follow-up. In the future, the survivors of childhood cancer need more information about their physical and mental health, as well as on their cancer inheritance, possible late-effects including fertility issues, and on the risk of relapse.

Coercion, Perceived Care and Quality of Life Among Patients in Psychiatric Hospitals

The goals of the study were to describe patients’ perceptions of care after experiencing seclusion/restraint and their quality of life. The goal was moreover to identify methodological challenges related to studies from the perspective of coerced patients. The study was conducted in three phases between September 2008 and April 2012. In the first phase, the instrument Secluded/ Restrained Patients’ Perception of their Treatment (SR-PPT) was developed and validated in Japan in cooperation with a Finnish research group (n = 56). Additional data were collected over one year from secluded/restrained patients using the instrument (n = 90). In the second phase, data were collected during the discharge process (n = 264). In the third phase, data were collected from electronic databases. Methodological and ethical issues were reviewed (n = 32) using systematic review method. Patients perceived that co-operation with the staff was poor; patients’ opinions were not taken into account, treatment targets collated and treatment methods were seen in different ways. Patients also felt that their concerns were not well enough understood. However, patients received getting nurses’ time. In particular, seclusion/restraint was considered unnecessary. The patients felt that they benefited from the isolation in treating their problems more than they needed it, even if the benefit was seen to be minor. Patients treated on forensic wards rated their treatment and care significantly lower than in general units. During hospitalization secluded/restrained patients evaluated their quality of life, however, better than did non-secluded/restrained patients. However, no conclusion is drawn to the effect that the better quality of life assessment is attributable to the seclusion/restraint because patients’ treatment period after the isolation was long and because of many other factors, as rehabilitation, medication, diagnostic differences, and adaptation. According to the systematic mixed studies review variation between study designs was found to be a methodological challenge. This makes comparison of the results more difficult. A research ethical weakness is conceded as regards descriptions of the ethical review process (44 %) and informed consent (32 %). It can be concluded that patients in psychiatric hospital care and having a voice as an equal expert require special attention to clinical nursing, decision-making and service planning. Patients and their family members will be consulted in plans of preventive and alternative methods for seclusion and restraint. The study supports the theory that in ethical decision-making situations account should be taken of medical indications, in addition to the patients’ preferences, the effect of treatment on quality of life, and this depends on other factors. The connection between treatment decisions and a patient’s quality of life should be evaluated more structurally in practice. Changing treatment culture towards patients’ involvement will support daily life in nursing and service planning taking into account improvements in patients’ quality of life.

Quality, Productivity and Economy in Welding Manufacturing - Case Study: West Africa

This thesis studies quality, productivity and economy in welding manufacturing in West African states such as Ghana, Nigeria and Cameroon. The study consists of two parts: the first part, which forms the theoretical background, reviews relevant literature concerning the metal and welding industries, and measurement of welding quality, productivity and economy. The second part, which is the empirical part, aims to identify activities in the metal manufacturing industries where welding is extensively used and to determine the extent of welding quality, productivity and economy measurements in companies operating in the metal manufacturing industries. Additionally, the thesis aims to identify challenges that companies face and to assess the feasibility of creating a network to address these issues. The research methods used in the empirical part are the case study (qualitative) method and the survey (quantitative) method. However, the case study method was used to elicit information from companies in Ghana, while the survey method was used to elicit information from companies in Nigeria and Cameroon. The study considers important areas that contribute to creating awareness and understanding of the current situation of the welding industry in West Africa. These areas include the metal manufacturing industrial sector, metal products manufactured, metal production and manufacturing systems deployed, welding quality, productivity and economy measurement systems utilized, equipment and materials on the markets, general challenges facing companies in welding operations, welding technology programs and research in local universities, and SWOT analysis of the various West African states. The notable findings indicate that majority of the companies operate in the constructionindustrial sector. Also, majority of the companies are project manufacturing oriented, thus provide services to customers operating in the growing industries such as the oil and gas, mining, food and the energy industry. In addition, only few companies are certified under standards such as ISO 9001, ISO 3834, and OHSAS 18001. More so, majority of the companies employ manual welding technique, and shielded metal arc welding (SMAW) as the commonly used welding process. Finally, welder salary is about € 300 / month as of June 2013 and the average operations turnover of medium to large companies is about € 5 million / year as at 2012. Based on analysis of the results of the study, it is noted that while welding activities are growing, the availability of cheap labor, the need for company and welder qualification and certification, and the need to manufacture innovative products through developmental projects (transfer of welding expertise and technology) remain as untapped opportunities in the welding industry in the West African states. The study serves as a solid platform for further research and concludes with several recommendations for development of the West African welding industry.

Managing Customer Issues through a Support Channel Network

The importance of after-sales service or service in general can be seen and experienced by customers every day with industrial as well as other non-industrial services or products. This dissertation, drawing on theory and experience, focuses on practical engineering implications, specifically the management of customer issues in the after-sales phase in the mobile phone arena. The main objective of this doctoral dissertation is to investigate customer after-sales issue management, specifically regarding mobile phones. The case studies focus on issue resolution time and the issue of corrective actions. This dissertation consists of a main body and four peer-reviewed journal articles and one manuscript currently under review by a peer-reviewed journal. The main body of this dissertation examines the elements of customer satisfaction, loyalty, and retention with respect to corrective actions to address customer issues and issue resolution time through literature and empirical studies. The five independent works are case studies supporting the thesis research questions. This study examines four questions: 1) What are the factors affecting corrective actions for customers? 2) How can customer issue resolution time be controlled? 3) What are the factors affecting processes in the service chain? and 4) How can communication be measured in a service chain? In this work, both quantitative and qualitative analysis methods are used. The main body of the thesis reviews the literature regarding the elements that bridge the five case studies. The case studies of the articles and surveys lean more toward the methodology of critical positivism and then apply the interpretive approach in interpreting the results. The case study articles employ various statistical methods to analyze and to interpret the empirical and survey data. The statistical methods were used to create a model that is useful for significantly optimizing issue resolution time. Moreover, it was found that samples for verifying issues provided by the customer neither improve the perceived quality of corrective actions nor the perceived quality of issue resolution time. The term “service” in this work is limited to the technical services that are provided by product manufacturers and after-sales authorized service vendors. On the basis of this research work, it has been observed that corrective actions and issue resolution time are associated with customer satisfaction and hence, according to induction theory, to customer loyalty and retention. This thesis utilizes knowledge of marketing and customer relationships to contribute to the existing body of knowledge concerning information and communication technology for after-sales service recovery of mobile terminals. The established models in the thesis contribute to the existing knowledge of the after-sales process of dealing with customer issues in the field of mobile phones. The findings suggest that process managers could focus more on communication and training provided to the staff as new technology evolves rapidly. The study also suggest the managers formulate strategies for how customers can be kept informed on a regular basis of the status of issues that have been escalated for corrective action. The findings also lay the foundation for the comprehensive objective to control the entire product development process, starting with conceptualization. This implies that robust design should be applied to the new products so that problems affecting customer service quality are not repeated. The objective will be achieved when the entire service chain from product development to the final user can be modeled and this model can be used to support the organization at all levels.

Design, implementation, and evaluation of an online water quality monitoring system in Lake Saimaa, Finland

Environmental threats are growing nowadays, they became global issues. People around the world try to face these issues by two means: solving the current affected environs and preventing non-affected environs. This thesis describes the design, implementation, and evaluation of online water quality monitoring system in Lake Saimaa, Finland. The water quality in Lake Saimaa needs to be monitored in order to provide responsible bodies with valuable information which allows them to act fast in order to prevent any negative impact on the lake's environment. The objectives were to design a suitable system, implement the system in Lake Saimaa, and then to evaluate the applicability and reliability of such systems for this environment. The needs for the system were first isolated, and then the design, needed modifications, and the construction of the system took place. After that was the testing of the system in Lake Saimaa in two locations nearby Mikkeli city. The last step was to evaluate the whole system. The main results were that the application of online water quality monitoring systems in Lake Saimaa can benefit of many advantages such as reducing the required manpower, time and running costs. However, the point of unreliability of the exact measured values of some parameters is still the drawback of such systems which can be developed by using more advanced equipments with more sophisticated features specifically for the purpose of monitoring in the predefined location.

Empirical studies on software quality construction: Exploring human factors and organizational influences

Software quality has become an important research subject, not only in the Information and Communication Technology spheres, but also in other industries at large where software is applied. Software quality is not a happenstance; it is defined, planned and created into the software product throughout the Software Development Life Cycle. The research objective of this study is to investigate the roles of human and organizational factors that influence software quality construction. The study employs the Straussian grounded theory. The empirical data has been collected from 13 software companies, and the data includes 40 interviews. The results of the study suggest that tools, infrastructure and other resources have a positive impact on software quality, but human factors involved in the software development processes will determine the quality of the products developed. On the other hand, methods of development were found to bring little effect on software quality. The research suggests that software quality is an information-intensive process whereby organizational structures, mode of operation, and information flow within the company variably affect software quality. The results also suggest that software development managers influence the productivity of developers and the quality of the software products. Several challenges of software testing that affect software quality are also brought to light. The findings of this research are expected to benefit the academic community and software practitioners by providing an insight into the issues pertaining to software quality construction undertakings.

Quality of outsourced IT services in different degrees of offshoring

The Finnish IT service market can be described to be at a turning point. The clients are ever more interested on services delivered from offshore but certain issues keep them cautious. There is a lack of knowledge on what implications different degrees of offshoring have on service quality. Although there has been significant amount of research related to both service quality and offshoring, several questions are unanswered, terminology remains ambivalent and research findings are inconsistent. The study focuses on the interception of these two fields. The purpose of the study is to learn more about service quality in different degrees of offshoring. At the same time it aims to contribute in narrowing the research gaps. The degree of offshoring can be divided to three delivery modes: onshore, collaboration and offshore. The study takes a mixed method approach where the quantitative and qualitative phases are executed sequentially. First data was gathered from incident management system. Resolution time in different degrees of offshoring was analyzed with Kruskal-Wallis and Jonckheere-Terpstra tests. In addition, the compliance to Service Level Agreement (SLA) in different degrees of offshoring was examined with cross tabulation. The findings from the quantitative analysis suggested that the services with offshore delivery mode perform the best in terms of promptness and SLA compliance. However, several issues were found related to the data and for that reason, the findings should be considered with prudence. After the quantitative analysis, the study moved on to qualitative data collection and analysis. Four semi-structured interviews were held. The interviewees represented different organizational roles and had experiences from different delivery modes. Several themes were covered in the interviews, including: the concept of quality, the subjectivity or objectivity of service quality, expectations and prejudices towards offshore deliveries, quality produced in India, proactiveness of offshore resources, quality indicators and the scarcity of collaborative deliveries. Several conclusions can be made from the empirical research. Firstly, the quality in different delivery modes was found to be controversial topic. Secondly, in the collaborative delivery covered in the study, the way tasks and resources are allocated seem to cause issues. On the other hand inexperienced offshore resources are assigned to the delivery and on the other hand only routine tasks are assigned to the resources. This creates a self-enforcing loop that results in low motivation, low ownership and high employee turnover in offshore. Nevertheless, this issue is not characteristic only to collaborative deliveries but rather allocation of tasks and resources. Moreover, prejudices were identified to affect the perceived service quality in non-predictable way. The research also demonstrated that there is a need in focal company for further data gathering and analysis.

Development of a New Welding Product Quality Control and Management System Model for China

The Chinese welding industry is growing every year due to rapid development of the Chinese economy. Increasingly, companies around the world are looking to use Chinese enterprises as their cooperation partners. However, the Chinese welding industry also has its weaknesses, such as relatively low quality and weak management. A modern, advanced welding management system appropriate for local socio-economic conditions is required to enable Chinese enterprises to enhance further their business development. The thesis researches the design and implementation of a new welding quality management system for China. This new system is called ‗welding production quality control management model in China‘ (WQMC). Constructed on the basis of analysis of a survey and in-company interviews, the welding management system comprises the following different elements and perspectives: a ‗Localized congenital existing problem resolution strategies‘ (LCEPRS) database, a ‗human factor designed training system‘ (HFDT) training strategy, the theory of modular design, ISO 3834 requirements, total welding management (TWM), and lean manufacturing (LEAN) theory. The methods used in the research are literature review, questionnaires, interviews, and the author‘s model design experiences and observations, i.e. the approach is primarily qualitative and phenomenological. The thesis describes the design and implementation of a HFDT strategy in Chinese welding companies. Such training is an effective way to increase employees‘ awareness of quality and issues associated with quality assurance. The study identified widely existing problems in the Chinese welding industry and constructed a LCEPRS database that can be used in efforts to mitigate and avoid common problems. The work uses the theory of modular design, TWM and LEAN as tools for the implementation of the WQMC system.

The Effectiveness of Learning Portfolios: A Study of Quality Assurance Programs of Selected Health Regulatory Colleges in Ontario

Health regulatory colleges promote quality practice and continued competence through Quality Assurance (QA) programs. For many colleges, a QA program includes the use of portfolios that incorporate self-directed learning. The purpose of this study was to determine some of the issues surrounding the effectiveness of QA portfolio programs. The literature review revealed that portfolios are valuable tools, but gaps in knowledge include a comparative analysis of QA programs and the perspective of regulatory college administrators. Data were collected through interviews with 6 administrators and a review of 14 portfolio models described on college websites. The results from the two data sources were applied to Robert Stake's responsive evaluation framework to identify issues related to the portfolio's effectiveness (Stake, 1967). The learning components of portfolios were analyzed through the humanist and constructivist lenses. All 14 portfolio models were found to have 3 main components: self-diagnosis, learning plan and activities, and self-evaluation. However, differences were uncovered in learners' autonomy in selecting learning activities, methods of portfolio evaluation, and the relationship between the portfolio and other QA components. The results revealed a dual philosophy of learning in portfolio models and an apparent contradiction between the needs of the individual learner and the organization. Paths for future research include the tenuous relationship between competence and learning, and the impact of technical approaches on selfdirected learning initiatives. A key recommendation is to acknowledge the unique identity of each profession so that health regulatory colleges can address legislative demands and learner needs.

Quality of life in multiple sclerosis: translation in French Canadian of the MSQoL-54

Affiliation: Louise Lafortune: Faculté de médecine, Université de Montréal

Étude sur la définition et la mesure des qualités des archives définitives issues d’une évaluation

Depuis quelques décennies, l'intérêt pour l’étude de la fonction d’évaluation s’est diversifié pour approfondir les principes théoriques (Jenkinson, 1922; Schellenberg, 1956; Samuels, 1992; Cook, 1992b; Eastwood, 1992b; Duranti, 1994; Couture, 1999), les stratégies (Booms, 1972; Samuels, 1986; Cook, 1992b; Eastwood, 1992b; Couture, 1999) et les dispositifs de leur processus d’application (Ham, 1984; Boles & Young, 1991; Cook, 2001a, 2001b). Mais, toutes ces contributions n'ont pas encore étudié la nature des résultats de l'évaluation que sont les archives définitives. Du point de vue patrimonial, l’absence d’études sur la définition et la mesure des qualités des archives définitives ne permet pas de vérifier si ces archives constituent un patrimoine documentaire significatif. Sur le plan administratif, l’état actuel de la pratique de l'évaluation n'a pas encore investi dans l'examen méticuleux de la nature de ses résultats. Au plan économique, le manque de méthodes et d'outils pour la mesure des qualités des archives ne permet pas de juger si ces archives valent l’investissement matériel, technique, financier et humain que leur conservation implique. Du point de vue professionnel, l’absence de méthodes et d’instruments d’évaluation des qualités des archives ne permet pas aux professionnels d’appuyer leur décision en matière d’évaluation des archives. Afin de remédier à cette situation, notre recherche vise à définir et à mesurer les qualités des archives définitives issues de l’évaluation. Pour ce faire, nous privilégions une méthodologie quantitative de nature descriptive, appropriée lorsqu’il s’agit d’étudier un sujet peu abordé (Fortin, 2006) tel que l'opérationnalisation des qualités des archives définitives. La stratégie de la recherche a comporté deux phases. La phase conceptuelle a permis d’identifier et de définir quatre qualités soit l’« Unicité », la « Preuve crédible », l’« Exploitabilité » et la « Représentativité ». La phase empirique consistait à vérifier la mesurabilité, à titre d’exemple, des variables découlant de deux des quatre dimensions de qualité dans le contexte des archives définitives, soit la « Preuve crédible » et l’« Exploitabilité ». Le mode de collecte des données réside dans l’application d’une grille de mesure conçue spécialement aux fins de cette étude. La réalisation de la collecte de données qui s’est déroulée à Bibliothèque et Archives nationales du Québec a permis l’opérationnalisation de 10 indicateurs spécifiques sur 13 appartenant à deux dimensions de qualité : la « Preuve crédible » et l’« Exploitabilité » des archives définitives. Ainsi, trois indicateurs spécifiques sur l’ensemble de 13 sont restés sans mesures à cause d’une certaine faiblesse liée à leur mesure que nous avons pu identifier et vérifier lors des pré-tests de la recherche. Ces trois indicateurs spécifiques sont le « Créateur » dans le cadre de la dimension de la « Preuve crédible », ainsi que la « Compréhensibilité » et la « Repérabilité » dans le cadre de la dimension de l’« Exploitabilité ». Les mesures obtenues pour les 10 indicateurs ont mené à l’identification des avantages et des points à améliorer concernant différentes variables liées au créateur, au service de conservation ou encore à l’état et à la nature du support. Cibler l’amélioration d’un produit ou d’un service représente, comme démontré dans la revue de la littérature, le but ultime d’une étude sur les dimensions de qualité. Trois types de contributions découlent de cette recherche. Au plan théorique, cette recherche offre un cadre conceptuel qui permet de définir le concept de qualité des archives définitives dans une perspective d’évaluation archivistique. Au plan méthodologique, elle propose une méthode de mesure des qualités applicables aux archives définitives ainsi que les instruments et le guide qui expliquent sa réalisation. Au plan professionnel, d'une part, elle permet d’évaluer les résultats de l’exercice de l’évaluation archivistique; d'autre part, elle offre aux professionnels non seulement une grille de mesure des qualités des archives définitives déjà testée, mais aussi le guide de son application.