Quasi-objects and actors in the web of belief. Formation of a national nuclear waste management system: the case of Finland

Paper presented in ISA RC23 meeting, Gothenburg July 16th 2010

Hankintajärjestelmän kehittäminen projektiliiketoiminnassa

Diplomityön tavoitteena oli tutkia millaisia vaatimuksia toimitusketjun yrityksen sisäisen osan toiminta ja tuotokset asettavat yrityksessä käytössä oleville tietojärjestelmille ja työprosesseille. Tarkoituksena oli myös rakentaa kehitysehdotus siitä, kuinka hankintatoimen osa-alueita järjestelmänäkökulmasta tulisi kehittää. Työn tutkimusote oli kvalitatiivinen ja konstruktiivinen. Työn teoriaosuudessa tarkasteltiin projektiliiketoimintaa ja hankintatoimea, joiden avulla oli tarkoitus luoda pohja empiriaosuuden käsittelylle. Lisäksi teoriassa tarkasteltiin hankintajärjestelmien kehittymistä ja nykyisiä kehityssuuntauksia, sekä tuotetiedonhallintaa ja sen osa-alueita. Aluksi kartoitettiin yrityksen tämänhetkiset ongelmakohdat suunnittelu-hankinta-toimitusvalvonta -rajapinnoilla, jonka jälkeen kuvattiin tavoitetilanne. Rajapintojen katkokset vaikuttivat pitkälle seuraaviin työvaiheisiin, mikä saataisiin ratkaistua automatisoinnilla. Työssä esitettiin myös kehityssuunnitelma ja sen eri osa-alueet nykyiselle järjestelmälle. Lisäksi aiheesta esitettiin syventäviä jatkotutkimuskohteita.

Automatisointiin ja monistettavuuteen perustuvan palvelumallin soveltaminen tietojärjestelmätoimituksissa

Ohjelmistotuotannon yleinen ongelma on se, että toimitusprojektien läpivientiajat pitkittyvät. Kilpailun kiristyessä ohjelmistoalalla on alettu kiinnittää erityistä huomiota projektien eri vaiheiden tehostamiseen. Process Vision Oy kehittää energiatietojärjestelmiä Suomen energia-alan yrityksille. Yrityksessä on kehitetty vuonna 2010 palvelumalli, jonka avulla pyritään nopeuttamaan toimitusprojektien eri vaiheita. Valtioneuvosto valmisteli vuonna 2009 tuntimittausasetuksen, joka määritti sääntöjä mittaustiedon hallintaan energia-alalla. Kyseisen asetuksen pohjalta Energiateollisuus julkaisi vuonna 2010 ohjeistuksen, joka selkeyttää asetuksen sisällön vaatimuksia jakeluverkonhaltijoille ja sähkön myyjille. Process Vision Oy on valmistellut ohjeistuksen pohjalta tuntimittauspaketin, joka sisältää ohjeistuksen mukaiset toiminnot GENERIS-järjestelmässä. Tässä diplomityössä määritellään Process Vision Oy:n palvelumallin mukaiset standardikomponentit tuntimittauspaketin toimitusprojekteja varten. Työn tavoitteena on kehittää mahdollisimman pitkälle tuotteistettu tuntimittauspaketin toimitus uusille ja vanhoille asiakkaille. Työn lopussa pohditaan miten hyvin palvelumalli soveltuu tuntimittauspaketin toimitusprojekteihin. Lisäksi työssä kartoitetaan yrityksessä käytössä olevien automatisointityökalujen kehitystarpeita. Työn tuloksena saatiin määriteltyä GENERIS-objektit ja konfiguraatiot, jotka toimitetaan tuntimittauspaketin mukana. Työn ohessa sisällytettiin yrityksen Suomen taseselvitysjärjestelmien asennusohjeeseen tuntimittauspaketin toiminnallisuuksien konfigurointi. Uusien vientimäärittelyjen avulla voidaan tuntimittauspaketin toiminnallisuudet toimittaa jatkossa tehokkaammin kuin aiemmin.

The Design and Implementation of a Power Management Feature to a Configuration Management System

Green IT is a term that covers various tasks and concepts that are related to reducing the environmental impact of IT. At enterprise level, Green IT has significant potential to generate sustainable cost savings: the total amount of devices is growing and electricity prices are rising. The lifecycle of a computer can be made more environmentally sustainable using Green IT, e.g. by using energy efficient components and by implementing device power management. The challenge using power management at enterprise level is how to measure and follow-up the impact of power management policies? During the thesis a power management feature was developed to a configuration management system. The feature can be used to automatically power down and power on PCs using a pre-defined schedule and to estimate the total power usage of devices. Measurements indicate that using the feature the device power consumption can be monitored quite precisely and the power consumption can be reduced, which generates electricity cost savings and reduces the environmental impact of IT.

Battery Cell Modeling for Battery Management System

Usage of batteries as energy storage is emerging in automotive and mobile working machine applications in future. When battery systems become larger, battery management becomes an essential part of the application concerning fault situations of the battery and safety of the user. A properly designed battery management system extends one charge cycle of battery pack and the whole life time of the battery pack. In this thesis main objectives and principles of BMS are studied and first order Thevenin’s model of the lithium-titanate battery cell is built based on laboratory measurements. The battery cell model is then verified by comparing the battery cell model and the actual battery cell and its suitability for use in BMS is studied.

Evaluating the Maturity of Data Management Practices in a Major Energy Provider Company

Data is the most important asset of a company in the information age. Other assets, such as technology, facilities or products can be copied or reverse-engineered, employees can be brought over, but data remains unique to every company. As data management topics are slowly moving from unknown unknowns to known unknowns, tools to evaluate and manage data properly are developed and refined. Many projects are in progress today to develop various maturity models for evaluating information and data management practices. These maturity models come in many shapes and sizes: from short and concise ones meant for a quick assessment, to complex ones that call for an expert assessment by experienced consultants. In this paper several of them, made not only by external inter-organizational groups and authors, but also developed internally at a Major Energy Provider Company (MEPC) are juxtaposed and thoroughly analyzed. Apart from analyzing the available maturity models related to Data Management, this paper also selects the one with the most merit and describes and analyzes using it to perform a maturity assessment in MEPC. The utility of maturity models is two-fold: descriptive and prescriptive. Besides recording the current state of Data Management practices maturity by performing the assessments, this maturity model is also used to chart the way forward. Thus, after the current situation is presented, analysis and recommendations on how to improve it based on the definitions of higher levels of maturity are given. Generally, the main trend observed was the widening of the Data Management field to include more business and “soft” areas (as opposed to technical ones) and the change of focus towards business value of data, while assuming that the underlying IT systems for managing data are “ideal”, that is, left to the purely technical disciplines to design and maintain. This trend is not only present in Data Management but in other technological areas as well, where more and more attention is given to innovative use of technology, while acknowledging that the strategic importance of IT as such is diminishing.

Establishment of a health and safety management system according to the OHSAS 18001 standard

The thesis develops guidelines for the implementation of the health and safety management system according to the OHSAS 18001 standard, as well as the feasible threat analysis, project proposal schedule, future system quality improvements and organizational change evaluation. The theoretical part clarifies determination of occupational health and safety, its management system, the OHSAS 18001 standard and integrated management system compounded of triple ISO 14001, ISO 9001 and OHSAS 18001 standards. The literature includes such important aspects as human factor, organizational policies, possible benefits, threats, organizational safety culture, Deming’s quality improvement cycle, system implementation, maintenance and cost matters. The empirical part demonstrates real-life situation by using Andritz Pulp & Paper Oy as a case study. Prior the thesis proposal, Andritz Group is analysed including separate business areas, acquisition and integration strategies, current status of the health and safety management and parallel experiences of the largest business area Andritz Hydro. The proposal is aimed at improving the current health and safety system for the permanent and sub-contracted employees at Andritz Pulp & Paper both in Finland and in various projects globally.

Supply chain performance management system

The purpose of the study is to determine general features of the supply chain performance management system, to assess the current state of performance management in the case company mills and to make proposals for improvement – how the future state of performance management system would look like. The study covers four phases which consist of theory and case company parts. Theoretical review gives understanding about performance management and measurement. Current state analysis assesses the current state of performance management in the mills. Results and proposals for improvement are derived from current state analysis and finally the conclusions with answers to research questions are presented. Supply chain performance management system consists of five areas: perfor-mance measurement and metrics, action plans, performance tracking, performance dialogue and rewards, consequences and actions. The result of the study revealed that all mills were quite average level in performance management and there is a room for improvement. Created performance improvement matrix served as a tool in assessing current performance management and could work also as a tool in the future in mapping the current state after transformation process. Limited harmonization was revealed as there were different ways to work and manage performance in the mills. Lots of good ideas existed though actions are needed to make a progress. There is also need to harmonize KPI structure.

Improving the Supply Chain Performance Management System in a Finnish paper mill

This Master’s Thesis studies performance management system and its benefits, risks and costs. Objective of the thesis is to describe and evaluate currently used supply chain performance management system (SCPMS) in a Finnish paper mill and its interfaces with its business unit’s SCPMS. As a result, the host company has improvement road map for improving its SCPMS. Used SCPMS in the host company and its interfaces to business unit’s SCPMS are described based on interviews held in the host company and the business unit. Evaluation of the host company’s SCPMS is based on literature study. For improvement road map, three areas in need of improvements are chosen. The study shows the need of high level top management commitment in successful performance management system implementation and usage, especially when the system is deployed to lower levels in the organization.

Toward a-state-of-the-art IR copyright management system: a needs assessment

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Research Data Management in the Cloud

Workshop at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Data Management [in eprints] for arts research: the experience at University of the Arts London

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

The Purdue University Research Repository (PURR): An institutional data management service with a virtual research environment, data publication, and archiving

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

From KAPTUR to VADS4R: Exploring Research Data Management in the Visual Arts

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014