Bulge testing and fracture properties of plasma-enhanced chemical vapor deposited silicon nitride thin films

The mechanical properties and fracture behavior of silicon nitride (SiNx) thin film fabricated by plasma-enhanced chemical vapor deposition is reported. Plane-strain moduli, prestresses, and fracture strengths of silicon nitride thin film; deposited both oil a bare Si substrate and oil a thermally oxidized Si substrate were extracted using bulge testing combined with a refined load-deflection model of long rectangular membranes. The plane-strain modu i and prestresses of SiNx thin films have little dependence on the substrates, that is, for the bare Si substrate, they are 133 +/- 19 GPa and 178 +/- 22 MPa, respectively, while for the thermally oxidized substrate, they are 140 +/- 26 Gila and 194 +/- 34 MPa, respectively. However, the fracture strength values of SiNx films grown on the two substrates are quite different, i.e., 1.53 +/- 0.33 Gila and 3.08 +/- 0.79 GPa for the bare Si substrate a A the oxidized Si substrate, respectively. The reference stresses were computed by integrating the local stress of the membrane at the fracture over the edge, Surface, and volume of the specimens and fitted with the Weibull distribution function. For SiNx thin film produced oil the bare Si Substrate, the Volume integration gave a significantly better agreement between data and model, implying that the volume flaws re the dominant fracture origin. For SiNx thin film grown on the oxidized Si substrate, the fit quality of surface and edge integration was significantly better than the Volume integration, and the dominant surface and edge flaws could be caused by buffered HF attacking the SiNx layer during SiO2 removal. Crown Copyright (C) 2008 Published by Elsevier B.V. All rights reserved.

Fracture properties of PECVD silicon nitride thin films by long rectangular memrane bulge test

Bulge test combined with a refined load-deflection model for long rectangular membrane was applied to determine the mechanical and fracture properties of PECVD silicon nitride (SiNx) thin films. Plane-strain modulus E-ps prestress s(0), and fracture strength s(max) of SiNx thin films deposited both on bare Si substrate and on SiO2-topped Si substrate were extracted. The SiNx thin films on different substrates possess similar values of E-ps and s(0) but quite different values of s(max). The statistical analysis of fracture strengths were performed by Weibull distribution function and the fracture origins were further predicted.

Fracture properties of silicon carbide thin films charcterized by bulge test of long membranes

The mechanical properties and fracture behavior of silicon carbide (3C-SiC) thin films grown on silicon substrates were characterized using bulge testing combined with a refined load-deflection model for long rectangular membranes. Plane-strain modulus E-ps, prestress so, and fracture strength s(max) for 3C-SiC thin films with thickness of 0.40 mu m and 1.42 mu m were extracted. The E, values of SiC are strongly dependent on grain orientation. The thicker SIC film presents lower so than the thinner film due to stress relaxation. The s(max) values decrease with increasing film thickness. The statistical analysis of the fracture strength data were achieved by Weibull distribution function and the fracture origins were predicted.

Relationship between load/unload response ratio and damage variable and its application

The physics-based parameter: load/unload response ratio (LURR) was proposed to measure the proximity of a strong earthquake, which achieved good results in earthquake prediction. As LURR can be used to describe the damage degree of the focal media qualitatively, there must be a relationship between LURR and damage variable (D) which describes damaged materials quantitatively in damage mechanics. Hence, based on damage mechanics and LURR theory, taking Weibull distribution as the probability distribution function, the relationship between LURR and D is set up and analyzed. This relationship directs LURR applied in damage analysis of materials quantitatively from being qualitative earlier, which not only provides the LURR method with a more solid basis in physics, but may also give a new approach to the damage evaluation of big scale structures and prediction of engineering catastrophic failure. Copyright (c) 2009 John Wiley & Sons, Ltd.

Relationship between load/unload response ratio and damage variable and its application

The physics-based parameter: load/unload response ratio (LURR) was proposed to measure the proximity of a strong earthquake, which achieved good results in earthquake prediction. As LURR can be used to describe the damage degree of the focal media qualitatively, there must be a relationship between LURR and damage variable (D) which describes damaged materials quantitatively in damage mechanics. Hence, based on damage mechanics and LURR theory, taking Weibull distribution as the probability distribution function, the relationship between LURR and D is set up and analyzed. This relationship directs LURR applied in damage analysis of materials quantitatively from being qualitative earlier, which not only provides the LURR method with a more solid basis in physics, but may also give a new approach to the damage evaluation of big scale structures and prediction of engineering catastrophic failure. Copyright (c) 2009 John Wiley & Sons, Ltd.

利用HIRFL加速的重离子获得半导体器件的σ-LET曲线

表征器件单粒子敏感度的σ-LET 曲线是轨道翻转率预估的重要依据.利用兰州重离子加速器（HIRFL）加速的 35 MeV/u的36Ar离子和 15.14 MeV/u的136Xe离子得到的 32 kbit×8静态存储器（SRAM）IDT71256单粒子翻转的实验数据,用Weibull和Lognormal两种函数拟合获得了完整的σ-LET 曲线,对两种拟合结果的差别进行了讨论,并在拟合参数的基础上估算了地球同步轨道和两条太阳同步轨道辐射环境中IDT71256的翻转率.

不同起源沙地樟子松林结构与生长比较研究(英文)

樟子松已成为三北沙区防护林主要乔木造林树种,但是,最早于20世纪50年代在科尔沁沙地引种的沙地樟子松却出现了生长衰退、枯梢直至死亡的现象,而天然状态的樟子松在该阶段却正处于旺盛生长期。为了比较沙地人工樟子松林与天然林的林分结构、生长特点及所处立地的生态因子的异同,对辽宁省彰武县章古台(最早引种沙地樟子松区)和内蒙古自治区红花尔基(天然樟子松分布区)的樟子松林进行了综合调查。结果表明,Weibull分布函数可较好地模拟人工林树木直径分布,正态分布函数可用于模拟天然林树木直径分布。基于树干解析的树木生长模型(Chapman-Richards)分析,人工林胸径、树高与材积的相对生长率与平均生长率的最大值比天然林分别提早11、22年,6、18年和35、59年。人工林材积的生长加速度高峰值出现在14年,而天然林则出现在33年;人工林的数量成熟龄为43年,天然林为102年;因此,可以推断天然林的寿命比人工林要长近60年。这一结果可以归纳为以下综合作用:1)两种起源地生态因子的巨大的差异,主要包括:人工林区的纬度、平均气温、降水量、蒸发量、海拨高度等较天然林区高;2)人工林的林分密度较天然林大;3)人工林区的干扰强度较天然林强。图4表6参23。

长白山阔叶红松林径级模拟研究——林分模拟

该文利用指数分布、Weibull分布和混合分布3种类型7个方程模拟长白山阔叶红松林径级分布.研究结果表明,长白山阔叶红松林的径级分布不是理想的倒“J”型,基本为“S”型;用3个负指数方程和修正指数方程模拟均为倒“J”型,在半对数图上为直线;Weibull方程模拟出了单峰,但是效果一般;用2个和3个组分的Weibull混合模型对长白山阔叶红松林径级分布进行了成功模拟,3个组分的Weibull混合模型的模拟效果有所提高,但是并没有显著改善.

土壤侵蚀的中子活化示踪法研究

利用中子活化示踪法研究坡面土壤的侵蚀过程 ,发现坡面的相对侵蚀量从坡脚到坡顶随坡长的变化符合 Weibull分布 ,其形状参数主要受降雨量、降雨历时和径流深度的影响 ,尺度参数主要与平均雨强、I3 0 相关。坡面在侵蚀的同时也发生沉积 ,一般来说短历时高强度的降雨沉积量较小 ,而长历时低强度的降雨沉积量较大 ,某一部位侵蚀产沙的沉积量与其距离之间有 y=axb的关系。坡面径流直接影响着坡面的输移比 ,当径流深和径流系数较高时 ,输移比接近于 1,否则输移比降低

樟子松沙地人工林直径分布模拟

利用反 Weibull函数模拟了章古台沙地樟子松人工林的直径分布规律 .结果表明 ,反 Weibull分布函数模拟樟子松人工林的直径分布效果好 ,具有精度高、适应性强等特点 .分别建立了反 Weibull分布函数 3个参数与林分年龄及密度之间的关系方程以及直径分布与 3个参数的回归方程 ,这些方程可用来预估林分产量、出材量以及评价经营效果

花岗岩风化土微观结构及其工程地质特性研究

Saprolite is the residual soil resulted from completely weathered or highly weathered granite and with corestones of parent rock. It is widely distributed in Hong Kong. Slope instability usually happens in this layer of residual soil and thus it is very important to study the engineering geological properties of Saprolite. Due to the relic granitic texture, the deformation and strength characteristics of Saprolite are very different from normal residual soils. In order to investigate the effects of the special microstructure on soil deformation and strength, a series of physical, chemical and mechanical tests were conducted on Saprolite at Kowloon, Hong Kong. The tests include chemical analysis, particle size analysis, mineral composition analysis, mercury injection, consolidation test, direct shear test, triaxial shear test, optical analysis, SEM & TEM analysis, and triaxial shear tests under real-time CT monitoring.Based on the testing results, intensity and degree of weathering were classified, factors affecting and controlling the deformation and strength of Saprolite were identified, and the interaction between those factors were analyzed.The major parameters describing soil microstructure were introduced mainly based on optical thin section analysis results. These parameters are of importance and physical meaning to describe particle shape, particle size distribution (PSD), and for numerical modeling of soil microstructure. A few parameters to depict particle geometry were proposed or improved. These parameters can be used to regenerate the particle shape and its distribution. Fractal dimension of particle shape was proposed to describe irregularity of particle shapes and capacity of space filling quantitatively. And the effect of fractal dimension of particle shape on soil strength was analyzed. At the same time, structural coefficient - a combined parameter which can quantify the overall microstructure of rock or soil was introduced to study Saprolite and the results are very positive. The study emphasized on the fractal characteristics of PSD and pore structure by applying fractal theory and method. With the results from thin section analysis and mercury injection, it was shown that at least two fractal dimensions Dfl(DB) and Df2 (Dw), exist for both PSD and pore structure. The reasons and physical meanings behind multi-fractal dimensions were analyzed. The fractal dimensions were used to calculate the formation depth and weathering rate of granite at Kowloon. As practical applications, correlations and mathematical models for fractal dimensions and engineering properties of soil were established. The correlation between fractal dimensions and mechanical properties of soil shows that the internal friction angle is mainly governed by Dfl 9 corresponding to coarse grain components, while the cohesion depends on Df2 , corresponding to fine grain components. The correlations between the fractal dimension, friction angle and cohesion are positive linear.Fractal models of PSD and pore size distribution were derived theoretically. Fragmentation mechanism of grains was also analyzed from the viewpoint of fractal. A simple function was derived to define the theoretical relationship between the water characteristic curve (WCC) and fractal dimension, based on a number of classical WCC models. This relationship provides a new analytical tool and research method for hydraulic properties in porous media and solute transportation. It also endues fractal dimensions with new physical meanings and facilitates applications of fractal dimensions in water retention characteristics, ground water movement, and environmental engineering.Based on the conclusions from the fractal characteristics of Saprolite, size effect on strength was expressed by fractal dimension. This function is in complete agreement with classical Weibull model and a simple function was derived to represent the relationship between them.In this thesis, the phenomenon of multi-fractal dimensions was theoretically analyzed and verified with WCC and saprolite PSD results, it was then concluded that multi-fractal can describe the characteristics of one object more accurately, compared to single fractal dimension. The multi-fractal of saprolite reflects its structural heterogeneity and changeable stress environment during the evolution history.

Estudo do processo de difusão de gases em carvões com base em isotérmicas de Langmuir

Tese de Doutoramento apresentada à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Doutror em Ciências da Terra.

Estimación de heredabilidades y correlaciones genéticas para caracteres funcionales mediante análisis de supervivencia en Holstein Colombiano.

Las evaluaciones genéticas para caracteres funcionales requieren metodologías como el análisis de supervivencia (SA), que contemplen registros pertenecientes a hembras que no han presentado el evento de interes (descarte o prenez) al momento de la evaluacion. Así, los objetivos de esta tesis fueron: 1) analizar los factores que afectan el riesgo de descarte en vida productiva (VP), y de concepción en días abiertos (DA) e intervalo primer-último servicio (IP), 2) estimar parámetros genéticos de dispersión para los caracteres evaluados. Se emplearon 44652 registros de lactancia de 15706 vacas Holstein Colombiano, ajustando un modelo animal frágil Weibull para VP, con el número de partos (NP), producción de leche (PL) y edad al primer parto (EPP) como efectos fijos. En el caso de DA e IPU se emplearon 14789 servicios de 6205 vacas, ajustando un modelo de datos agrupados con efectos fijos de NP, EPP y número de servicios (SC). En todos los casos se incluyeron efectos aleatorios de animal y de hato. Tanto PL como NP tuvieron gran influencia en la VP, al igual que NP en DA e IPU. Se estimaron valores de h2 de 0,104, 0,086 y 0,1013 para VP, DA, e IPU, respectivamente, asi como correlaciones genéticas simples (rs) entre el nivel de PL con VP y DA de ƒ{0,03 y 0,47, respectivamente. Teniendo en cuenta tanto los valores de cría expresados como riesgo relativo, asi como la magnitud de rs, un aumento en PL conllevaría a disminución en el riesgo de descarte y aumento en el riesgo de concepción, dando lugar a aumentos en la VP y reducción en DA. Las h2s estimadas sugieren la existencia de variabilidad genetica para VP, DA e IPU en Holstein Colombiano, sirviendo de sustento para la implementación de evaluaciones genética de la raza, aprovechando las ventajas de metodologías como SA.