Web user interface architecture for advanced planning and scheduling systems Case: Nokia Demand / Supply Planning Applications

In modem hitec industry Advanced Planning and Scheduling (APS) systems provide the basis for e-business solutions towards the suppliers and the customers. One objective of this thesis was to clarify the modem supply chain management with the APS systems and especially concentrate on the area of Collaborative Planning. In order Advanced Planning and Scheduling systems to be complete and usable, user interfaces are needed. Current Visual Basic user interfaces have faced many complaints and arguments from the users as well as from the development team. This thesis is trying to analyze the reasons and causes for the encountered problems and also provide ways to overcome them. The decision has been made to build the new user interfaces to be Web-enabled. Therefore another objective of this thesis was to research and find suitable technologies for building the Web-based user interfaces for Advanced Planning and Scheduling Systems in Nokia Demand/Supply Planning business area. Comparison between the most suitable technologies is made. Usability issues of Web-enabled user interfaces are also covered. The empirical part of the thesis includes design and implementation of a Web-based user interface with the chosen technology for a particular APS module that enables Collaborative Planning with suppliers.

Utilização de filtro de transformada de fourier para a minimização de ruídos em sinais analíticos

Instrumental data always present some noise. The analytical data information and instrumental noise generally has different frequencies. Thus is possible to remove the noise using a digital filter based on Fourier transform and inverse Fourier transform. This procedure enhance the signal/noise ratio and consecutively increase the detection limits on instrumental analysis. The basic principle of Fourier transform filter with modifications implemented to improve its performance is presented. A numerical example, as well as a real voltammetric example are showed to demonstrate the Fourier transform filter implementation. The programs to perform the Fourier transform filter, in Matlab and Visual Basic languages, are included as appendices

TitGer: uma planilha eletrônica para simulação de titulação de mistura de compostos polipróticos

The aim of this paper is to present a simple way of treating the general equation for acid-base titrations based on the concept of degree of dissociation, and to propose a new spreadsheet approach for simulating the titration of mixtures of polyprotic compounds. The general expression, without any approximation, is calculated a simple iteration method, making number manipulation easy and painless. The user-friendly spreadsheet was developed by using MS-Excel and Visual-Basic-for-Excel. Several graphs are drawn for helping visualizing the titration behavior. A Monte Carlo function for error simulation was also implemented. Two examples for titration of alkalinity and McIlvaine buffer are presented.

Una aplicación de apoyo a la toma de decisiones para el costeo de maquinarias de cosecha forestal

Desde hace años las empresas forestales y en especial las que prestan servicios de cosecha forestal han implementado la computación como una herramienta de trabajo, esto ha permitido automatizar la toma de decisiones. El propósito de esta práctica es lograr que el sector forestal siga siendo competitivo a nivel internacional, para tal objetivo se hace necesario optimizar las diferentes actividades que participan en la producción forestal. Los costos asociados a la faena de cosecha forestal son los de mayor incidencia dentro de los planes operativos, por ello es importante tener conocimiento de sus efectos reales en el cálculo de las tarifas. El trabajo realizado consistió en desarrollar un software de aplicación y consulta para la estructuración y tarifa a cobrar para una faena de cosecha forestal mecanizada, desarrollado en el lenguaje de programación Visual Basic. SICOFOR 1.0.1 al ser comparado con otras planillas de cálculo como por ejemplo las desarrolladas en Microsoft Excel entrega una mayor facilidad de trabajo, permite actualizar las bases de datos de la maquinaria a utilizar, personal, administración e implementación de trabajo para cada sistema de aprovechamiento, además entrega detalladamente la tarifa a cobrar. Aunque realmente los que fijan las tarifas de los diferentes servicios son las empresas demandantes de los servicios, el desarrollo del programa como herramienta de apoyo a la toma de decisiones, sigue siendo útil para comparar la tarifa que la empresa forestal mandante ofrece y los costos reales del servicio de cosecha, para tomar la decisión de aceptar o desestimar el negocio.

MODELING A COMPUTER APPLICATION FOR MANAGEMENT OF MAINTENANCE ACTIVITIES OF UNPAVED ROADS

ABSTRACTThis study presents a contribution to the modeling of a computer application employing a method of serviceability performance for unpaved roads, aiming the management of maintenance/restoration activities of the primary surface layer. The proposed methodology consisted of field inspections during dry (April to September) and rainy (October to March) periods, during which objective evaluations were performed to survey of defects and their densities and degrees of severity. To aid the functional classification of analyzed road sections and the determination of the defect with major influence on the serviceability of these roads, the method of serviceability performance proposed by Silva (2009)was implemented in the Visual Basic for Applications (VBA) language in Microsoft Excel software. With the use of the computer application proposed it was possible to identify among the defects analyzed in field, through the index of serviceability of the sampling unit per defect type (ISUdef), which one had the greatest influence on determining the relative serviceability index per road section (IST). The results allow us to conclude that the computer application Road achieved satisfactory results, since the objective evaluation criteria applied to road sections denotes consistency regarding their serviceability.

Determinação do perfil radial de aspersores a partir de ensaios de distribuição de água em sistemas autopropelidos de irrigação

Este trabalho apresenta uma rotina computacional, em Visual Basic 6, para determinar o perfil radial de aspersores, mediante ensaios de equipamentos autopropelidos de irrigação. Para a avaliação do programa, foi utilizado o aplicativo computacional SIMULASOFT e dados de ensaios de campo de sistemas autopropelidos de irrigação. As lâminas aplicadas, geradas pelo programa SIMULASOFT, foram para o aspersor PLONA-RL250 (bocal = 20 x 6 mm; pressão = 490 kPa), em deslocamento linear com velocidade de 50 m h-1, e quatro ângulos de giro distintos (180; 270; 330 e 360º). As lâminas aplicadas, observadas nos ensaios de campo, em condições de vento menores que 1,5 m s-1, foram para o aspersor PLONA-RL250, operando na pressão de 392 kPa e sob as condições: i) bocal de 14 mm, ângulo de giro de 240º e velocidade de 30 m h-1; ii) bocal de 14 x 6 mm, ângulo de giro de 270º e velocidade de 55 m h-1. O perfil radial gerado pela rotina computacional com as lâminas aplicadas, geradas com SIMULASOFT, foi igual ao perfil radial obtido em ensaios de laboratório, revelando que o procedimento de cálculo está correto. Uma boa semelhança entre os perfis radiais do aspersor, determinados em ensaios de laboratório e gerados pela rotina computacional, com as lâminas obtidas nos ensaios de campo, foi observada, mostrando que ensaios de campo de sistemas autopropelidos de irrigação podem ser utilizados para a obtenção do perfil radial de aspersores.

Tietokantojen yhdistäminen järjestelmän rajapintoja hyödyntäen

Tässä työssä on pyritty kartoittamaan mahdollisuudet omatoimiseen Voyager-kirjastojärjestelmän aineistotietokantojen ja asiakasrekisterien yhdistelyyn. Lähtökohtana on ollut oletus, että kohdejärjestelmän tietokantaan ei ole oikeuksia eikä sopimusteknistä mahdollisuuttakaan kirjoittaa tietoja suoraan kyselykielellä. Järjestelmän dokumentaatiota sekä verkostoa hyödyntämällä olen pyrkinyt kartoittamaan mahdollisuudet kaiken toiminnallisuuden vaatiman datan siirtoon. Hyödyntämällä järjestelmän rajapintoja, voidaan saavuttaa kustannussäästöjä sekä joustavuutta työn suorittamisen aikataulutukseen. Bibliografisen datan siirtoon Voyager-kirjastojärjestelmässä on mahdollisuus hyödyntää palvelimella eräajona suoritettavaa ohjelmaa. Tässä eräajossa voidaan siirtää sekä bibliografiset tietueet että varastotietueet. Nidetietojen kirjoittamiseksi kohteena olevaan tietokantaan käytetään Visual Studio -sovellusta, joka hyödyntää luettelointirajapintaa. Asiakastietojen siirtoon on mahdollista hyödyntää palvelimella suoritettavaa eräajoa, jonka syötteeksi kirjoitetaan määrämittainen syötetiedosto. Asiakastietueisiin sidotut lainatiedot voidaan siirtää kohdetietokantaan asiakasohjelman offline-lainaustoiminnolla.

Restaural, sistema de gestió de comandes per restaurants

El projecte consisteix en un sistema informatitzat per restaurants centralitzat en un servidor que permet recollir comandes als clients a través de PDA’s i de pantalles tàctils situades a la barra per enviar-les als corresponents llocs d’ elaboració: -Terminal de la cuina on s’elaboraran tots els menjars. -Terminal de la bodega on es serviran els vins i caves. -Terminal barra on es serviran els licors, refrescos (entre d’altres productes totalment configurables). -Terminal de postres on es reben les línies de comanda relacionades amb els postres. L’objectiu acadèmic del projecte serà adquirir coneixement a nivell de disseny i gestió de dades, així com la comunicació de diversos dispositius en temps real. S’utilitzarà la tecnologia .net, concretament el llenguatge de programació visual c# .net. i com a gestor de bases de dades el mysql 5.0.19. A més, es treballa amb la metodologia UML, utilitzant també diversos patrons. Per fer del sistema un sistema centralitzat en un servidor s’utilitzarà la comunicació per terminal service de windows el qual ens brinda la possibilitat d’establir diverses sessions d’usuaris concurrents. Cada sessió estarà destinada a un cambrer, per tant, hi haurà una sessió per PDA

Mjukvaruverktyg för loggning och analys avindustriella processer

This report discusses developing a software log tool for analysis of industrial processes. The target was to develop software that can help electro Engineers for monitor and fault finding in industrial processes. The tool is called PLS (Process log server), and is developed in Visual Studio.NET Framework 2005. PLS works as a client with Beijer Electronics OPC Server. The program is able to read data from PLC (Programmable Logic Controller), trough the OPC Server. PLS connects to all kind of controllers that is supported by the Beijer Electronics OPC Server. Signal data is stored in a database for later analysis. Chosen signals data can easily be exported into a text file. The text file is adopted for import to MS Office Excel. User manual [UM-07] is written as a separate document. The software acted stable through the function test. The final product becomes a first-rate tool that is simple to use. As an advantage, the software can be developed with more functions in the future.

Saúde Mental e enfermagem: em busca da integralidade na ESF

The present work shows an inquiry about the conceptions and practical work of the nursing professionals on the accompaniment of mental sick patients in the Family s Health Strategy, under the approach of the completeness in health. The justification of this research is given by bringing an special attention concerning the subjet to these professionals of health: the gradual abandonment of the traditional manicomial model leads to the insertion of mental patients in the community . The nursing professionals must be prepared to receive these patients in the basic net of health and contribute to help their adaptation and insertion in the social environment as citizen. In this context, considering the entire attention to the mental health, it is important to detach that the assistance to the patient must search his reinsertion in the community by providing programs that develops his sociability. This analytical study was developed using a qualitative approach and a thematic verbal history. Ten nurses of Nova Natal s Health of the Family Unit, of Felipe Camarão Mista s Unit and of Cidade da Esperança s Health Unit contributed for its development . The information was acquired through an instrument research that made possible the accomplishment of the interviews. These ones were set previously and counted on the assent of the participants. The interviews were recorded and analyzed in accordance with the pertinent literature concerning the subject. The aggregation of the information was then discussed. At this moment three thematic axles were defined dividing the categories of analysis. According to the results of the interviews, the practical procedure given to the patients with mental upheaval is resumed by the prescription of psicotroprics medicaments. It doesn t provide an accompaniment by the professionals of health, specifically, nurses, to the patients and their families. The lack of qualification and a multi-professional team emerged as one of the challenges for the implementation of practical procedures towards the patients with mental upheaval. Therefore, the results of this research show the necessity of transformations in the current scene of the mental health in the Family s Health Strategy. These changes can be reached by politics investments on the mental health area, not only financially but by providing human resources that should allow the professionals to exert the completeness procedures

Modelagem e simulação da solubilização da parafina em tubos circulares e em regime laminar

O óleo produzido nos novos campos de petróleo está cada vez mais parafínico e viscoso, com isso, à medida que o óleo é escoado, parafinas são depositadas sobre as paredes internas do tubo, e ao longo do tempo, tendem a reduzir drasticamente a área transversal ao escoamento. Visando estudar o processo de solubilização da parafina em dutos, esse trabalho objetiva desenvolver modelos matemáticos que represente o processo, com base nos fenômenos envolvidos no mesmo tais como transferência de massa, transferência de energia e equilíbrio sólido-líquido, implementando-os em um ambiente de desenvolvimento VBA (Visual Basic) for Excel ®. O presente trabalho foi realizado em quatro etapas: i) modelagem dos fenômenos de transferência de calor e massa, ii) modelagem da rotina dos coeficientes de atividade através do modelo UNIFAC e modelagem do sistema de equilíbrio sólido-líquido; iii) modelagem matemática do processo de solubilização e cálculo da espessura da parafina ao longo do tempo; iv) implementação dos modelos em um ambiente de desenvolvimento VBA for Excel® e criação de um simulador com uma interface gráfica, para simular o processo de solubilização da parafina depositada em dutos e sua otimização. O simulador conseguiu produzir soluções bastante adequadas, mantendo continuidade das equações diferenciáveis do balanço de energia e de massa, com uma interpretação física viável, sem a presença de dissipação de oscilações nos perfis de temperatura e massa. Além disso, esse simulador visa permitir a simulação nas diversas condições de escoamento, bem como compreender a importância das variáveis (vazão, temperatura de entrada, temperatura externa, cadeia carbônica do solvente). Através dos resultados foram possíveis verificar os perfis de temperatura, fração molar e o de solubilização

Os Centros de Especialidades Odontológicas como suporte da atenção básica: uma avaliação na perspectiva da integralidade

The public dental services in Brazil were limited, practically, to the basic care, so that the specialized services acted, up to 2002, no more than 3,5% of the total of clinical procedures. That lower offer reveals the difficulty of continuity of the attention, that is, the comprehensiveness in the assistance, particulary, the reference and counter-reference system. Brasil Sorridente search to supply those needs when proposing Speciality Dental's Centers(CEOs Centros de Especialidades Odontológicas, Brazil) to compose the services of average complexity. In 2005, Ministry of Health enabled the three CEOs of Natal, located in the North II, East and West Sanitary Districts. This investigation evaluated the implantation of these CEOs, as support of the family health care teams, in the perspective of organization of the services in assistencial nets in Natal/RN. It was a study of evaluation, with qualitative approach and some quantitative data as contribution. Dentists, users and managers were interviewed to identify and to understand their perceptions, relationships and experiences in the daily of the services. The conceptual base that orientated the investigation was the principle of comprehensiveness, in its operational sense of the hierarchization in health attention levels. The collection of data was done with documental research, direct observation and semi-structured interview. The analysis was accomplished by triangulation of the extracted content from the used techniques and sources of interviewed groups depositions, looking for theoretical-conceptual support in specific bibliography. The results pointed aspects that go away from the comprehensiveness like: low resolution of problems in the basic net; little valorization of the space in the health units; traditional models of access to health services, insufficient offer for some specialties, compromising the reference and counter-reference system; practices centered in procedures in the CEO; bureaucratic directions from basic care to the specialized service; disintegrated and disjointed system among levels of attention; disrespect to the municipal protocol. On the other hand, there is an approach of compreensiveness in situations like: increase of the access and covering in the Family Health Strategy (ESF Estratégia Saúde da Família, Brazil); larger approach between professional and user; tendency to the quantitative and qualitative growth of specialized actions; punctual initiatives of relationships among levels; existence of protocol to guide professionals

Electrothermal characterization and nonlinear modelling of GaN transistors for telecommunication circuit design

This thesis starts showing the main characteristics and application fields of the AlGaN/GaN HEMT technology, focusing on reliability aspects essentially due to the presence of low frequency dispersive phenomena which limit in several ways the microwave performance of this kind of devices. Based on an equivalent voltage approach, a new low frequency device model is presented where the dynamic nonlinearity of the trapping effect is taken into account for the first time allowing considerable improvements in the prediction of very important quantities for the design of power amplifier such as power added efficiency, dissipated power and internal device temperature. An innovative and low-cost measurement setup for the characterization of the device under low-frequency large-amplitude sinusoidal excitation is also presented. This setup allows the identification of the new low frequency model through suitable procedures explained in detail. In this thesis a new non-invasive empirical method for compact electrothermal modeling and thermal resistance extraction is also described. The new contribution of the proposed approach concerns the non linear dependence of the channel temperature on the dissipated power. This is very important for GaN devices since they are capable of operating at relatively high temperatures with high power densities and the dependence of the thermal resistance on the temperature is quite relevant. Finally a novel method for the device thermal simulation is investigated: based on the analytical solution of the tree-dimensional heat equation, a Visual Basic program has been developed to estimate, in real time, the temperature distribution on the hottest surface of planar multilayer structures. The developed solver is particularly useful for peak temperature estimation at the design stage when critical decisions about circuit design and packaging have to be made. It facilitates the layout optimization and reliability improvement, allowing the correct choice of the device geometry and configuration to achieve the best possible thermal performance.

Whole ship energy optimization: the case study of a chemical tanker

La presente dissertazione investiga la possibilità di ottimizzare l’uso di energia a bordo di una nave per trasporto di prodotti chimici e petrolchimici. Il software sviluppato per questo studio può essere adattato a qualsiasi tipo di nave. Tale foglio di calcolo fornisce la metodologia per stimare vantaggi e miglioramenti energetici, con accuratezza direttamente proporzionale ai dati disponibili sulla configurazione del sistema energetico e sui dispositivi installati a bordo. Lo studio si basa su differenti fasi che permettono la semplificazione del lavoro; nell’introduzione sono indicati i dati necessari per svolgere un’accurata analisi ed è presentata la metodologia adottata. Inizialmente è fornita una spiegazione sul layout dell’impianto, sulle sue caratteristiche e sui principali dispositivi installati a bordo. Vengono dunque trattati separatamente i principali carichi, meccanico, elettrico e termico. In seguito si procede con una selezione delle principali fasi operative della nave: è seguito tale approccio in modo da comprendere meglio la ripartizione della richiesta di potenza a bordo della nave e il suo sfruttamento. Successivamente è svolto un controllo sul dimensionamento del sistema elettrico: ciò aiuta a comprendere se la potenza stimata dai progettisti sia assimilabile a quella effettivamente richiesta sulla nave. Si ottengono in seguito curve di carico meccanico, elettrico e termico in funzione del tempo per tutte le fasi operative considerate: tramite l’uso del software Visual Basic Application (VBA) vengono creati i profili di carico che possono essere gestiti nella successiva fase di ottimizzazione. L’ottimizzazione rappresenta il cuore di questo studio; i profili di potenza ottenuti dalla precedente fase sono gestiti in modo da conseguire un sistema che sia in grado di fornire potenza alla nave nel miglior modo possibile da un punto di vista energetico. Il sistema energetico della nave è modellato e ottimizzato mantenendo lo status quo dei dispositivi di bordo, per i quali sono considerate le configurazioni di “Load following”, “two shifts” e “minimal”. Una successiva investigazione riguarda l’installazione a bordo di un sistema di accumulo di energia termica, così da migliorare lo sfruttamento dell’energia disponibile. Infine, nella conclusione, sono messi a confronto i reali consumi della nave con i risultati ottenuti con e senza l’introduzione del sistema di accumulo termico. Attraverso la configurazione “minimal” è possibile risparmiare circa l’1,49% dell’energia totale consumata durante un anno di attività; tale risparmio è completamente gratuito poiché può essere raggiunto seguendo alcune semplici regole nella gestione dell’energia a bordo. L’introduzione di un sistema di accumulo termico incrementa il risparmio totale fino al 4,67% con un serbatoio in grado di accumulare 110000 kWh di energia termica; tuttavia, in questo caso, è necessario sostenere il costo di installazione del serbatoio. Vengono quindi dibattuti aspetti economici e ambientali in modo da spiegare e rendere chiari i vantaggi che si possono ottenere con l’applicazione di questo studio, in termini di denaro e riduzione di emissioni in atmosfera.

Creazione e validazione di un modello per lo sfruttamento dell'idrogeno come vettore di accumulo dell'energia elettrica

Nell’ambito di un progetto di ricerca sui sistemi di accumulo dell’energia elettrica, in corso di avvio al “Laboratorio di microreti di generazione e accumulo” di Ravenna, è stato sviluppato un modello di calcolo in grado di simulare il comportamento di un elettrolizzatore.Il comportamento di un generico elettrolizzatore è stato modellato mediante una serie di istruzioni e relazioni matematiche, alcune delle quali ricavate tramite un’analisi dettagliata della fisica del processo di elettrolisi, altre ricavate empiricamente sulla base delle prove sperimentali e dei dati presenti nella bibliografia. Queste espressioni sono state implementate all’interno di un codice di calcolo appositamente sviluppato, realizzato in linguaggio Visual Basic, che sfrutta come base dati i fogli di calcolo del software Microsoft Excel per effettuare la simulazione. A partire dalle caratteristiche dell’elettrolizzatore (pressione e temperatura di esercizio, dimensione degli elettrodi, numero di celle e fattore di tuning, più una serie di coefficienti empirici) e dell’impianto generale (potenza elettrica disponibile e pressione di stoccaggio), il modello è in grado di calcolare l’idrogeno prodotto e l’efficienza globale di produzione e stoccaggio. Il modello sviluppato è stato testato sia su di un elettrolizzatore alcalino, quello del progetto PHOEBUS, basato su una tecnologia consolidata e commercialmente matura, sia su di un apparecchio sperimentale di tipo PEM in fase di sviluppo: in entrambi i casi i risultati forniti dal modello hanno trovato pieno riscontro coi dati sperimentali.