Uso do método de Monte Carlo para simulação e detecção do espectro de raios-X gerado com feixes de elétrons em alvo de Molibdênio, utilizando o Geant4

The huge demand for procedures involving ionizing radiation promotes the need for safe methods of experimentation considering the danger of their biological e ects with consequent risk to humans. Brazilian's legislation prohibits experiments involving this type of radiation in humans through Decree 453 of Ministry of Health with determines that such procedures comply with the principles of justi cation, optimization and dose limitation. In this line, concurrently with the advancement of available computer processing power, computing simulations have become relevant in those situations where experimental procedures are too cost or impractical. The Monte Carlo method, created along the Manhattan Project duringWorldWar II, is a powerful strategy to simulations in computational physics. In medical physics, this technique has been extensively used with applications in diagnostics and cancer treatment. The objective of this work is to simulate the production and detection of X-rays for the energy range of diagnostic radiology, for molybdenum target, using the Geant4 toolkit. X-ray tubes with this kind of target material are used in diagnostic radiology, speci cally in mammography, one of the most used techniques for screening of breast cancer in women. During the simulations, we used di erent models for bremsstrahlung available in physical models for low energy, in situations already covered by the literature in earlier versions of Geant4. Our results show that although the physical situations seems qualitatively adequate, quantitative comparisons to available analytical data shows aws in the code of Geant4 Low Energy source

Analisando a possibilidade de um anel ao redor de um satélite

On November 26 th, 2005, Rhea, one of Saturn's moons, is found by Cassini spacecraft approximately at 5.105 km from Saturn. Observations in situ reveal that electrons are depleted in the moon's vicinity. However, Rhea is considered massive enough to retain a thin atmosphere. Assumption was that the atmosphere of Rhea was not composed exclusively of gas, its likely contains solid material that can absorb magnetospheric particles. According to Jones et al. (2008), these particles were in a speci c position so that at the moment of observation the electrons could not be detected. In opposition to this idea there is a group, Tiscareno et al. 2010, Cornell University Library, that underwent intensive search for any material that might be orbiting Rhea using Cassini images, however the could not identify any. Second recommendation made by American researchers and other countries, and accepted by the National Board of Research the Cassini Equinox Mission will continue in orbit around Saturn until 2016.The probe will perform several maneuvers with high inclination to delve into the main ring system, and then enter in Saturn's atmosphere and collide with planet. This research is of great importance because until today no rings were found orbiting satellites. The goal of this work is to analyze the orbital evolution of a set of particles around Rhea disturbance of Saturn, J2 e J4 and check results by the numerical simulations and the possibility of a stable ring orbiting Rhea.

Chemical and morphological features of dental composite resin: influence of light curing units and immersion media

Aims: The study evaluated the influence of light curing units and immersionmedia on superficial morphology and chemistry of the nanofilled composite resin Supreme XT (3M)through the EDX analysis and SEM evaluation. Light curing units with different power densitiesand mode of application used were XL 3000 (480 mW/cm2), Jet Lite 4000 Plus (1230mW/cm2), andUltralume Led 5 (790 mW/cm2) and immersion media were artificial saliva, Coke1, tea and coffee,totaling 12 experimental groups. Specimens (10 mm 3 2 mm) were immersed in each respectivesolution for 5 min, three times a day, during 60 days and stored in artificial saliva at 378C 6 18Cbetween immersion periods. Topography and chemical analysis was qualitative. Findings: Groupsimmersed in artificial saliva, showed homogeneous degradation of matrix and deposition of calciumat the material surface. Regarding coffee, there was a reasonable chemical degradation with loss ofload particles and deposition of ions. For tea, superficial degradation occurred in specific areaswith deposition of calcium, carbon, potassium and phosphorus. For Coke1, excessive matrix degra-dation and loss of load particles with deposition of calcium, sodium, and potassium. Conclusion:Light curing units did not influence the superficial morphology of composite resin tested, but theimmersion beverages did. Coke1affected material’s surface more than did the other tested drinks.Microsc. Res. Tech. 73:176–181, 2010.

Construção de uma escala para avaliação da pro ciência em conteúdos matemáticos básicos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Existência e concentração de soluções para uma equação de schrödinger estacionária

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

O estudo da circunferência no ensino médio: uma proposta utilizando um software livre

Pós-graduação em Matemática em Rede Nacional - IBILCE

Experimental models of autoimmune inflammatory ocular diseases

Ocular inflammation is one of the leading causes of blindness and loss of vision. Human uveitis is a complex and heterogeneous group of diseases characterized by inflammation of intraocular tissues. The eye may be the only organ involved, or uveitis may be part of a systemic disease. A significant number of cases are of unknown etiology and are labeled idiopathic. Animal models have been developed to the study of the physiopathogenesis of autoimmune uveitis due to the difficulty in obtaining human eye inflamed tissues for experiments. Most of those models are induced by injection of specific photoreceptors proteins (e.g., S-antigen, interphotoreceptor retinoid-binding protein, rhodopsin, recoverin, phosducin). Non-retinal antigens, including melanin-associated proteins and myelin basic protein, are also good inducers of uveitis in animals. Understanding the basic mechanisms and pathogenesis of autoimmune ocular diseases are essential for the development of new treatment approaches and therapeutic agents. The present review describes the main experimental models of autoimmune ocular inflammatory diseases.

Intrinsic organization of the suprachiasmatic nucleus in the capuchin monkey

The suprachiasmatic nucleus (SCN), which is the main circadian biological clock in mammals, is composed of multiple cells that function individually as independent oscillators to express the self-sustained mRNA and protein rhythms of the so-called clock genes. Knowledge regarding the presence and localization of the proteins and neuroactive substances of the SCN are essential for understanding this nucleus and for its successful manipulation. Although there have been advances in the investigation of the intrinsic organization of the SCN in rodents, little information is available in diurnal species, especially in primates. This study, which explores the pattern of expression and localization of PER2 protein in the SCN of capuchin monkey, evaluates aspects of the circadian system that are common to both primates and rodents. Here, we showed that PER2 protein immunoreactivity is higher during the light phase. Additionally, the complex organization of cells that express vasopressin, vasoactive intestinal polypeptide, neuron-specific nuclear protein, calbindin and calretinin in the SCN, as demonstrated by their immunoreactivity, reveals an intricate network that may be related to the similarities and differences reported between rodents and primates in the literature.

Impact of thermal bridging on the performance of buildings using Light Steel Framing in Brazil

The Light Steel Framing building technology was introduced in Brazil in the late 1990s for the construction of residential houses. Because the design system was imported from the United States and is optimised to work well in that temperate climate, some modi fi cations must be made to adapt it for the Brazilian climate. The objective of this paper was to assess the impact of thermal bridging across enclosure elements on the thermal performance of buildings designed with Light Steel Framing in Brazil. The numerical simulation program EnergyPlus and a speci fi c method that considered the effects of metallic structures in the hourly simulations were used for the analysis. Two air-conditioned commercial buildings were used as case studies. The peak thermal load increased approximately 10% when an interior metal frame was included in the numerical simulations compared to non-metallic structures. Even when a metal frame panel was used only for vertical elements in the facade of a building with a conventional concrete structure, the simulations showed a 5% increase in annual energy use.

A core calculus for the analysis and implementation of biologically inspired languages

The application of Concurrency Theory to Systems Biology is in its earliest stage of progress. The metaphor of cells as computing systems by Regev and Shapiro opened the employment of concurrent languages for the modelling of biological systems. Their peculiar characteristics led to the design of many bio-inspired formalisms which achieve higher faithfulness and specificity. In this thesis we present pi@, an extremely simple and conservative extension of the pi-calculus representing a keystone in this respect, thanks to its expressiveness capabilities. The pi@ calculus is obtained by the addition of polyadic synchronisation and priority to the pi-calculus, in order to achieve compartment semantics and atomicity of complex operations respectively. In its direct application to biological modelling, the stochastic variant of the calculus, Spi@, is shown able to model consistently several phenomena such as formation of molecular complexes, hierarchical subdivision of the system into compartments, inter-compartment reactions, dynamic reorganisation of compartment structure consistent with volume variation. The pivotal role of pi@ is evidenced by its capability of encoding in a compositional way several bio-inspired formalisms, so that it represents the optimal core of a framework for the analysis and implementation of bio-inspired languages. In this respect, the encodings of BioAmbients, Brane Calculi and a variant of P Systems in pi@ are formalised. The conciseness of their translation in pi@ allows their indirect comparison by means of their encodings. Furthermore it provides a ready-to-run implementation of minimal effort whose correctness is granted by the correctness of the respective encoding functions. Further important results of general validity are stated on the expressive power of priority. Several impossibility results are described, which clearly state the superior expressiveness of prioritised languages and the problems arising in the attempt of providing their parallel implementation. To this aim, a new setting in distributed computing (the last man standing problem) is singled out and exploited to prove the impossibility of providing a purely parallel implementation of priority by means of point-to-point or broadcast communication.

Advanced lithium and lithium-ion rechargeable batteries for automotive applications

The worldwide demand for a clean and low-fuel-consuming transport promotes the development of safe, high energy and power electrochemical storage and conversion systems. Lithium-ion batteries (LIBs) are considered today the best technology for this application as demonstrated by the recent interest of automotive industry in hybrid (HEV) and electric vehicles (EV) based on LIBs. This thesis work, starting from the synthesis and characterization of electrode materials and the use of non-conventional electrolytes, demonstrates that LIBs with novel and safe electrolytes and electrode materials meet the targets of specific energy and power established by U.S.A. Department of Energy (DOE) for automotive application in HEV and EV. In chapter 2 is reported the origin of all chemicals used, the description of the instruments used for synthesis and chemical-physical characterizations, the electrodes preparation, the batteries configuration and the electrochemical characterization procedure of electrodes and batteries. Since the electrolyte is the main critical point of a battery, in particular in large- format modules, in chapter 3 we focused on the characterization of innovative and safe electrolytes based on ionic liquids (characterized by high boiling/decomposition points, thermal and electrochemical stability and appreciable conductivity) and mixtures of ionic liquid with conventional electrolyte. In chapter 4 is discussed the microwave accelerated sol–gel synthesis of the carbon- coated lithium iron phosphate (LiFePO 4 -C), an excellent cathode material for LIBs thanks to its intrinsic safety and tolerance to abusive conditions, which showed excellent electrochemical performance in terms of specific capacity and stability. In chapter 5 are presented the chemical-physical and electrochemical characterizations of graphite and titanium-based anode materials in different electrolytes. We also characterized a new anodic material, amorphous SnCo alloy, synthetized with a nanowire morphology that showed to strongly enhance the electrochemical stability of the material during galvanostatic full charge/discharge cycling. Finally, in chapter 6, are reported different types of batteries, assembled using the LiFePO 4 -C cathode material, different anode materials and electrolytes, characterized by deep galvanostatic charge/discharge cycles at different C-rates and by test procedures of the DOE protocol for evaluating pulse power capability and available energy. First, we tested a battery with the innovative cathode material LiFePO 4 -C and conventional graphite anode and carbonate-based electrolyte (EC DMC LiPF 6 1M) that demonstrated to surpass easily the target for power-assist HEV application. Given that the big concern of conventional lithium-ion batteries is the flammability of highly volatile organic carbonate- based electrolytes, we made safe batteries with electrolytes based on ionic liquid (IL). In order to use graphite anode in IL electrolyte we added to the IL 10% w/w of vinylene carbonate (VC) that produces a stable SEI (solid electrolyte interphase) and prevents the graphite exfoliation phenomenon. Then we assembled batteries with LiFePO 4 -C cathode, graphite anode and PYR 14 TFSI 0.4m LiTFSI with 10% w/w of VC that overcame the DOE targets for HEV application and were stable for over 275 cycles. We also assembled and characterized ―high safety‖ batteries with electrolytes based on pure IL, PYR 14 TFSI with 0.4m LiTFSI as lithium salt, and on mixture of this IL and standard electrolyte (PYR 14 TFSI 50% w/w and EC DMC LiPF 6 50% w/w), using titanium-based anodes (TiO 2 and Li 4 Ti 5 O 12 ) that are commonly considered safer than graphite in abusive conditions. The batteries bearing the pure ionic liquid did not satisfy the targets for HEV application, but the batteries with Li 4 Ti 5 O 12 anode and 50-50 mixture electrolyte were able to surpass the targets. We also assembled and characterized a lithium battery (with lithium metal anode) with a polymeric electrolyte based on poly-ethilenoxide (PEO 20 – LiCF 3 SO 3 +10%ZrO 2 ), which satisfied the targets for EV application and showed a very impressive cycling stability. In conclusion, we developed three lithium-ion batteries of different chemistries that demonstrated to be suitable for application in power-assist hybrid vehicles: graphite/EC DMC LiPF 6 /LiFePO 4 -C, graphite/PYR 14 TFSI 0.4m LiTFSI with 10% VC/LiFePO 4 -C and Li 4 T i5 O 12 /PYR 14 TFSI 50%-EC DMC LiPF 6 50%/LiFePO 4 -C. We also demonstrated that an all solid-state polymer lithium battery as Li/PEO 20 –LiCF 3 SO 3 +10%ZrO 2 /LiFePO 4 -C is suitable for application on electric vehicles. Furthermore we developed a promising anodic material alternative to the graphite, based on SnCo amorphous alloy.

Riconoscimento di gesti: estensione a più punti del corpo e ad attori multipli

Negli ultimi anni si è assistito ad una radicale rivoluzione nell’ambito dei dispositivi di interazione uomo-macchina. Da dispositivi tradizionali come il mouse o la tastiera si è passati allo sviluppo di nuovi sistemi capaci di riconoscere i movimenti compiuti dall’utente (interfacce basate sulla visione o sull’uso di accelerometri) o rilevare il contatto (interfacce di tipo touch). Questi sistemi sono nati con lo scopo di fornire maggiore naturalezza alla comunicazione uomo-macchina. Le nuove interfacce sono molto più espressive di quelle tradizionali poiché sfruttano le capacità di comunicazione naturali degli utenti, su tutte il linguaggio gestuale. Essere in grado di riconoscere gli esseri umani, in termini delle azioni che stanno svolgendo o delle posture che stanno assumendo, apre le porte a una serie vastissima di interessanti applicazioni. Ad oggi sistemi di riconoscimento delle parti del corpo umano e dei gesti sono ampiamente utilizzati in diversi ambiti, come l’interpretazione del linguaggio dei segni, in robotica per l’assistenza sociale, per indica- re direzioni attraverso il puntamento, nel riconoscimento di gesti facciali [1], interfacce naturali per computer (valida alternativa a mouse e tastiera), ampliare e rendere unica l’esperienza dei videogiochi (ad esempio Microsoft 1 Introduzione Kinect© e Nintendo Wii©), nell’affective computing1 . Mostre pubbliche e musei non fanno eccezione, assumendo un ruolo cen- trale nel coadiuvare una tecnologia prettamente volta all’intrattenimento con la cultura (e l’istruzione). In questo scenario, un sistema HCI deve cercare di coinvolgere un pubblico molto eterogeneo, composto, anche, da chi non ha a che fare ogni giorno con interfacce di questo tipo (o semplicemente con un computer), ma curioso e desideroso di beneficiare del sistema. Inoltre, si deve tenere conto che un ambiente museale presenta dei requisiti e alcune caratteristiche distintive che non possono essere ignorati. La tecnologia immersa in un contesto tale deve rispettare determinati vincoli, come: - non può essere invasiva; - deve essere coinvolgente, senza mettere in secondo piano gli artefatti; - deve essere flessibile; - richiedere il minor uso (o meglio, la totale assenza) di dispositivi hardware. In questa tesi, considerando le premesse sopracitate, si presenta una sistema che può essere utilizzato efficacemente in un contesto museale, o in un ambiente che richieda soluzioni non invasive. Il metodo proposto, utilizzando solo una webcam e nessun altro dispositivo personalizzato o specifico, permette di implementare i servizi di: (a) rilevamento e (b) monitoraggio dei visitatori, (c) riconoscimento delle azioni.

Functional equations of polylogarithms in motivic cohomology

For an infinite field F, we study the integral relationship between the Bloch group B_2(F) and the higher Chow group CH^2(F,3) by proving some relations corresponding to the functional equations of the dilogarithm. As a second result, the groups involved in Suslin’s exact sequence 0 → Tor^1(F^× ,F^×)∼ → CH^2(F,3) → B_2(F) → 0 are identified with homology groups of the cycle complex Z^2(F,•) computing Bloch’s higher Chow groups. Using these results, we give explicit cycles in motivic cohomology generating the integral motivic cohomology groups of some specific number fields and determine whether a given cycle in the Chow group already lives in one of the other groups of Suslin’s sequence. In principle, this enables us to find a presentation of the codimension two Chow group of an arbitrary number field. Finally, we also prove some relations in the higher Chow groups of codimension three modulo 2-torsion coming from relations in the higher Bloch group B_3(F) modulo 2-torsion. Further, we can prove a series of relations in CH^ 3(Q(zeta_p),5) for a primitive pth root of unity zeta_p.

On the identification of bridge decks aeroelastic coefficients: the covariance block hankel matrix method

Il seguente elaborato si concentra sull'identifi�cazione strutturale di sistemi soggetti a sollecitazioni aeroelastiche e nello speci�fico l'attenzione viene rivolta ad impalcati da ponte. Si analizzano i concetti principali caratterizzanti il campo dell'aeroelasticità indagando i fattori dominanti che entrano in gioco sul piano teorico. In seguito, si considera il metodo di identifi�cazione strutturale chiamato Covariance Block Hankel Matrix (CBHM) utilizzato come strumento di derivazione dei coeffi�cienti aeroelastici propri della struttura. Infi�ne, si indaga il comportamento di questo metodo di identi�ficazione al variare di una serie di parametri chiave e all'interno di diversi scenari, visionando risultati ottenuti tramite una serie di test eff�ettuati per provare l'a�dattabilità del metodo stesso al variare delle condizioni che caratterizzano il sistema.

Caratterizzazione della superficie di array di nanofili di silicio

Nel primo capitolo viene introdotto lo studio eff�ettuato e descritto un metodo di misure successivo alla caratterizzazione della super�ficie. Nel secondo capitolo vengono descritti i campioni analizzati e, nello speci�fico, la crescita attraverso MaCE dei nanofi�li di silicio. Nel terzo capitolo viene descritto lo strumento AFM utilizzato e la teoria della caratterizzazione alla base dello studio condotto. Nella quarta sezione vengono descritti i risultati ottenuti mentre nelle conclusioni viene tratto il risultato dei valori ottenuti di RMS roughness e roughness exponent.