Molecular characterization and phylogenetic analysis of small ruminant lentiviruses isolated from Canadian sheep and goats

Background: Small Ruminant Lentiviruses (SRLV) are widespread in Canadian sheep and goats and represent an important health issue in these animals. There is however no data about the genetic diversity of Caprine Arthritis Encephalitis Virus (CAEV) or Maedi Visna Virus (MVV) in this country. Findings: We performed a molecular and phylogenetic analysis of sheep and goat lentiviruses from a small geographic area in Canada using long sequences from the gag region of 30 infected sheep and 36 infected goats originating from 14 different flocks. Pairwise DNA distance and phylogenetic analyses revealed that all SRLV sequences obtained from sheep clustered tightly with prototypical Maedi visna sequences from America. Similarly, all SRLV strains obtained from goats clustered tightly with prototypical US CAEV-Cork strain. Conclusions: The data reported in this study suggests that Canadian and US SRLV strains share common origins. In addition, the molecular data failed to bring to light any evidence of past cross species transmission between sheep and goats, which is consistent with the type of farming practiced in this part of the country where single species flocks predominate and where opportunities of cross species transmissions are proportionately low.

On-chip Non-reciprocal Optical Devices Based on Quantum Inspired Photonic Lattices

We propose integrated optical structures that can be used as isolators and polarization splitters based on engineered photonic lattices. Starting from optical waveguide arrays that mimic Fock space (quantum state with a well-defined particle number) representation of a non-interacting two-site Bose Hubbard Hamiltonian, we show that introducing magneto-optic nonreciprocity to these structures leads to a superior optical isolation performance. In the forward propagation direction, an input TM polarized beam experiences a perfect state transfer between the input and output waveguide channels while surface Bloch oscillations block the backward transmission between the same ports. Our analysis indicates a large isolation ratio of 75 dB after a propagation distance of 8mm inside seven coupled waveguides. Moreover, we demonstrate that, a judicious choice of the nonreciprocity in this same geometry can lead to perfect polarization splitting.

Optical Indoor Positioning of Vehicles

Indoor positioning is the backbone of many advanced intra-logistic applications. As opposed to unified outdoor satellite positioning systems, there are many different technical approaches to indoor positioning. Depending on the application, there are different trade-offs between accuracy, range, and costs. In this paper we present a new concept for a 4-degree-of-freedom (4-DOF) positioning system to be used for vehicle tracing in a logistic facility. The system employs optical data transmission between active infrastructure and receiver devices. Compared to existing systems, these optical technologies promise to achieve better accuracy at lower costs. We will introduce the positioning algorithm and an experimental setup of the system.

Can homeopathic verum and placebo globules be distinguished by UV spectroscopy?

Purpose: Homeopathic preparations are used in homeopathy and anthroposophically extended medicine. Previous studies described differences in UV transmission between homeopathic preparations of CuSO4 and controls. The aim of the present study was to investigate whether statistically significant differences can be found between homeopathic verum and placebo globules by UV spectroscopy. Methods: Verum (aconitum 30c, calcium carbonate/quercus e cortice) and placebo globules used in two previous clinical trials were dissolved in distilled water at 10mg/ml 20-23h prior to the measurements. Absorbance was measured at 190 – 340nm with a Shimadzu UV-1800 double beam spectrophotometer. Duplicates of each sample were measured in a randomized order 4 times on each of the 5 measurement days. To correct for differences between measurement days, average absorbance of all samples on one day was deduced from absorbance of the individual samples. The Kruskal-Wallis test was used to determine group differences between the samples, and finally the coding of the samples was revealed. Results: First analysis showed significant differences (p≤0.05) in average UV absorbance at 200 – 290nm between the samples and a tendency of a correlation (p≤0.1) between absorbance and globule weight. More results will be presented at the conference. Conclusion: Since the absorbance of the samples at the wavelengths between 200 and 290nm was small, a number of aspects had to be considered and should be corrected for if they are present when performing UV spectroscopy on homeopathic globules: 1. Exact weighing of the globules. 2. Measurement error of the spectrophotometer at small absorbances. 3. Drift of the spectrophotometer during a measurement day. 4. Differences between measurement days. The question remains what caused the differences in absorbance found in these experiments: the use of the original material for the production of the verum globules, differences in the production of verum and placebo globules, or other context factors.

Effect of electromagnetic fields on highly diluted remedies measured by ultraviolet spectroscopy

Purpose: In homeopathy or anthroposophically extended medicine high dilutions are used. They showed significant differences in ultraviolet light (UV) transmission between controls and different dilution levels. Exposing such dilutions to physical factors such as UV light or elevated temperature (37�C) yielded significantly different UV transmissions values compared to unexposed dilutions. The aim was to test whether electromagnetic fields (EMF) of a mobile phone affect the UV absorbance of dilutions of Atropa belladonna (Ab) and quartz. Methods: Commercially available dilutions of Ab 4x, 6x, 12x, 15x, 30x and of quartz 6x, 12x, 15x, 30x were investigated. On 5 days, 4 samples of each dilution were exposed to the EMF by a mobile phone at 900MHz (GSM) with an output power of 2W for 3 h. Control samples were kept in a separate room. UV-absorbance of the samples in the range from 190 to 340 nm was measured in randomized order. The average absorbance from 200 to 340 nm and from 200 to 240 nm was compared between exposed and unexposed samples by a dependent t-test. Results: Between unexposed and exposed dilutions of Ab and quartz no significant differences were detected, except for quartz 12x over the range from 200 to 340 nm. Conclusion: Exposure of high dilutions of Ab and quartz to GSM EMF of a mobile phone did not alter UV absorbance of these dilutions.

Molecular epidemiology of Mycoplasma hyopneumoniae from outbreaks of enzootic pneumonia in domestic pig and the role of wild boar.

Mycoplasma hyopneumoniae is the major cause of enzootic pneumonia (EP) in domestic pigs, a disease with low mortality but high morbidity, having a great economic impact for producers. In Switzerland EP has been successfully eradicated, however, sporadic outbreaks are observed with no obvious source. Besides the possibility of recurrent outbreaks due to persisting M. hyopneumoniae strains within the pig population, there is suspicion that wild boars might introduce M. hyopneumoniae into swine herds. To elucidate possible links between domestic pig and wild boar, epidemiological investigations of recent EP outbreaks were initiated and lung samples of pig and wild boar were tested for the presence of specific genotypes by multilocus sequence typing (MLST). Despite generally different genotypes in wild boar, outbreak strains could be found in geographically linked wild boar lungs after, but so far not before the outbreak. Recurrent outbreaks in a farm were due to the same strain, indicating unsuccessful sanitation rather than reintroduction by wild boar. In another case outbreaks in six different farms were caused by the same strain never found in wild boar, confirming spread between farms due to hypothesized animal transport. Results indicate the presence of identical lineages of wild boar and domestic pig strains, and possible transmission of M. hyopneumoniae between wild boar and pig. However, the role of wild boar might be rather one as a recipient than a transmitter. More important than contact to wild boar for sporadic outbreaks in Switzerland is apparently persistence of M. hyopneumoniae within a farm as well as transmission between farms.

Nasal carriage of methicillin-resistant Staphylococcus aureus (MRSA) among Swiss veterinary health care providers: detection of livestock- and healthcare-associated clones.

We screened a total of 340 veterinarians (including general practitioners, small animal practitioners, large animal practitioners, veterinarians working in different veterinary services or industry), and 29 veterinary assistants for nasal carriage of methicillin-resistant Staphylococcus aureus (MRSA) and Staphylococcus pseudintermedius (MRSP) at the 2012 Swiss veterinary annual meeting. MRSA isolates (n = 14) were detected in 3.8 % (95 % CI 2.1 - 6.3 %) of the participants whereas MRSP was not detected. Large animal practitioners were carriers of livestock-associated MRSA (LA-MRSA) ST398-t011-V (n = 2), ST398-t011-IV (n = 4), and ST398-t034-V (n = 1). On the other hand, participants working with small animals harbored human healthcare-associated MRSA (HCA-MRSA) which belonged to epidemic lineages ST225-t003-II (n = 2), ST225-t014-II (n = 1), ST5-t002-II (n = 2), ST5-t283-IV (n = 1), and ST88-t186-IV (n = 1). HCA-MRSA harbored virulence factors such as enterotoxins, β-hemolysin converting phage and leukocidins. None of the MRSA isolates carried Panton-Valentine leukocidin (PVL). In addition to the methicillin resistance gene mecA, LA-MRSA ST398 isolates generally contained additional antibiotic resistance genes conferring resistance to tetracycline [tet(M) and tet(K)], trimethoprim [dfrK, dfrG], and the aminoglycosides gentamicin and kanamycin [aac(6')-Ie - aph(2')-Ia]. On the other hand, HCA-MRSA ST5 and ST225 mainly contained genes conferring resistance to the macrolide, lincosamide and streptogramin B antibiotics [erm(A)], to spectinomycin [ant(9)-Ia], amikacin and tobramycin [ant(4')-Ia], and to fluoroquinolones [amino acid substitutions in GrlA (S84L) and GyrA (S80F and S81P)]. MRSA carriage may represent an occupational risk and veterinarians should be aware of possible MRSA colonization and potential for developing infection or for transmitting these strains. Professional exposure to animals should be reported upon hospitalization and before medical intervention to allow for preventive measures. Infection prevention measures are also indicated in veterinary medicine to avoid MRSA transmission between humans and animals, and to limit the spread of MRSA both in the community, and to animal and human hospitals.

Outbreak investigation identifies a single Listeria monocytogenes strain in sheep with different clinical manifestations, soil and water.

Listeria (L.) monocytogenes causes orally acquired infections and is of major importance in ruminants. Little is known about L. monocytogenes transmission between farm environment and ruminants. In order to determine potential sources of infection, we investigated the distribution of L. monocytogenes genetic subtypes in a sheep farm during a listeriosis outbreak by applying four subtyping methods (MALDI-TOF-MS, MLST, MLVA and PFGE). L. monocytogenes was isolated from a lamb with septicemia and from the brainstem of three sheep with encephalitis. Samples from the farm environment were screened for the presence of L. monocytogenes during the listeriosis outbreak, four weeks and eight months after. L. monocytogenes was found only in soil and water tank swabs during the outbreak. Four weeks later, following thorough cleaning of the barn, as well as eight months later, L. monocytogenes was absent in environmental samples. All environmental and clinical L. monocytogenes isolates were found to be the same strain. Our results show that the outbreak involving two different clinical syndromes was caused by a single L. monocytogenes strain and that soil and water tanks were potential infection sources during this outbreak. However, silage cannot be completely ruled out as the bales fed prior to the outbreak were not available for analysis. Faeces samples were negative, suggesting that sheep did not act as amplification hosts contributing to environmental contamination. In conclusion, farm management appears to be a crucial factor for the limitation of a listeriosis outbreak.

What do brain network interactions tell about cognitive processes? How to seek causality?

Optimal adjustment of brain networks allows the biased processing of information in response to the demand of environments and is therefore prerequisite for adaptive behaviour. It is widely shown that a biased state of networks is associated with a particular cognitive process. However, those associations were identified by backward categorization of trials and cannot provide a causal association with cognitive processes. This problem still remains a big obstacle to advance the state of our field in particular human cognitive neuroscience. In my talk, I will present two approaches to address the causal relationships between brain network interactions and behaviour. Firstly, we combined connectivity analysis of fMRI data and a machine leaning method to predict inter-individual differences of behaviour and responsiveness to environmental demands. The connectivity-based classification approach outperforms local activation-based classification analysis, suggesting that interactions in brain networks carry information of instantaneous cognitive processes. Secondly, we have recently established a brand new method combining transcranial alternating current stimulation (tACS), transcranial magnetic stimulation (TMS), and EEG. We use the method to measure signal transmission between brain areas while introducing extrinsic oscillatory brain activity and to study causal association between oscillatory activity and behaviour. We show that phase-matched oscillatory activity creates the phase-dependent modulation of signal transmission between brain areas, while phase-shifted oscillatory activity blunts the phase-dependent modulation. The results suggest that phase coherence between brain areas plays a cardinal role in signal transmission in the brain networks. In sum, I argue that causal approaches will provide more concreate backbones to cognitive neuroscience.

Spatiotemporal dynamics of Puumala hantavirus associated with its rodent host, Myodes glareolus

Many viruses significantly impact human and animal health. Understanding the population dynamics of these viruses and their hosts can provide important insights for epidemiology and virus evolution. Puumala virus (PUUV) is a European hantavirus that may cause regional outbreaks of hemorrhagic fever with renal syndrome in humans. Here, we analyzed the spatiotemporal dynamics of PUUV circulating in local populations of its rodent reservoir host, the bank vole (Myodes glareolus) during eight years. Phylogenetic and population genetic analyses of all three genome segments of PUUV showed strong geographical structuring at a very local scale. There was a high temporal turnover of virus strains in the local bank vole populations, but several virus strains persisted through multiple years. Phylodynamic analyses showed no significant changes in the local effective population sizes of PUUV, although vole numbers and virus prevalence fluctuated widely. Microsatellite data demonstrated also a temporally persisting subdivision between local vole populations, but these groups did not correspond to the subdivision in the virus strains. We conclude that restricted transmission between vole populations and genetic drift play important roles in shaping the genetic structure and temporal dynamics of PUUV in its natural host which has several implications for zoonotic risks of the human population.

Retrospective analysis of Methicillin-Resistant Staphylococcus Aureus (MRSA) skin and Soft-Tissue Infections (SSTI) in a university hospital emergency department (ED)

Study Objective: Identify the most frequent risk factors of Community Acquired-MRSA (CA-MRSA) Skin and Soft-tissue Infections (SSTIs) using a case series of patients and characterize them by age, race/ethnicity, gender, abscess location, druguse and intravenous drug-user (IVDU), underlying medical conditions, homelessness, treatment resistance, sepsis, those whose last healthcare visit was within the last 12 months, and describe the susceptibility pattern from this central Texas population that have come into the University Medical Center Brackenridge (UMCB) Emergency Department (ED). ^ Methods: This study was a retrospective case-series medical record review involving a convenience sample of patients in 2007 from an urban public hospital's ED in Texas that had a SSTI that tested positive for MRSA. All positive MRSA cultures underwent susceptibility testing to determine antibiotic resistance. The demographic and clinical variables that were independently associated with MRSA were determined by univariate and multivariate analysis using logistic regression to calculate odds ratios (OR), 95% confidence intervals, and significance (p≤ 0.05). ^ Results: In 2007, there were 857 positive MRSA cultures. The demographics were: males 60% and females 40%, with the average age of 36.2 (std. dev. =13) the study population consisted of non-Hispanic white (42%), Hispanics (38%), and non-Hispanic black (18.8%). Possible risk factors addressed included using recreational drugs (not including IVDU) (27%) homelessness (13%), diabetes status (12.6%) or having an infectious disease, and IVDU (10%). The most frequent abscess location was the leg (26.6%), followed by the arm and torso (both 13.7%). Eighty-three percent of patients had one prominent susceptibility pattern that had a susceptibility rate for the following antibiotics: trimethoprim/sulfamethoxazole (TMP-SMX) and vancomycin had 100%, gentamicin 99%, clindamycin 96%, tetracycline 96%, and erythromycin 56%. ^ Conclusion: The ED is becoming an important area for disease transmission between the sterile hospital environment and the outside environment. As always, it is important to further research in the ED in an effort to better understand MRSA transmission and antibiotic resistance, as well as to keep surveillance for the introduction of new opportunistic pathogens into the population. ^

Empleo de materiales reciclados para centros educativos en Chile

Los objetivos de este proyecto son dobles. El primero a conseguir es el acondicionamiento acústico de un centro educativo para alcanzar un mayor rendimiento docente; lo que se pretende lograr mejorando la inteligibilidad de la palabra y reduciendo el ruido en los diferentes recintos. El segundo objetivo, es la reducción de los costos económicos y medioambientales del proyecto empleando en el acondicionamiento acústico materiales procedentes del reciclado o existentes en el entorno local, reduciendo lo mayor posible la importación de estos materiales. Desde la investigación de las exigencias acústicas de un centro educativo, se determinarán los parámetros adecuados para su diseño óptimo. En general los mayores problemas acústicos existentes en estos establecimientos, son debidos a la transferencia de ruido entre los diferentes recintos y su excesiva reverberación, lo que provoca dificultades en la transmisión de la palabra y por ende también en las actividades docentes y los objetivos educativos. Asimismo, los parámetros y exigencias acústicas planteadas y desarrolladas, serán estudiados a partir de un contexto real y específico. El lugar elegido para el caso de estudio, será la ciudad de Santiago de Chile. Es importante, aclarar que en este país no existe una normativa aplicable a este tipo de establecimientos, por tanto se planteará el aislamiento acústico y posterior acondicionamiento a partir de normas y requisitos internacionales. Además, las soluciones acústicas planteadas serán de materiales reciclados existentes en el mercado nacional. Esta decisión tiene como finalidad reducir la afección al medio ambiente fomentando el desarrollo ecológico y sostenible como respuesta al crecimiento económico y la conservación de recursos en un país que se encuentra en vías de desarrollo. Por último, se plantea el acondicionamiento acústico de los diferentes recintos del colegio en proyecto, mediante simulación acústica en el programa EASE (Enhanced Acoustic Simulator for Engineers), lo que nos permite conocer el comportamiento de los recintos antes y después del acondicionamiento acústico. SUMMARY The objective of this Project is twofold. On the one hand, the acoustic conditioning of a school is developed in order to achieve a better teaching performance. For this purpose, the speech intelligibility is enhanced and the noise in the different rooms is reduced. On the other hand, the economic costs and environmental impact are reduced by using recycled materials or materials found in the local area, reducing as much as possible the use of imported materials. The appropriate acoustic parameters will be determined from the evaluation of the acoustic demands of the school. The main problems in these environments are the noise transmission between rooms as well as a high reverberation time. These will cause problems with the speech transmission, which is of great importance for educational purposes. Furthermore, the acoustic parameters and requirements are taken from a real and specific context. The place chosen for the research is Santiago, Chile. It is remarkable that in this country there is no national legislation that can be applied to such places, therefore International Standards are considered to evaluate the acoustic insulation and conditioning. The acoustic solutions considered in this project come from recycled materials existing on the domestic market. The decision aims to reduce the environmental impact, promoting environmentally sustainable development as a response to the economic growth and the maintenance of resources in a developing country. Finally, a simulation at some different areas of the school is carried out, comparing the behaviour before and after the proposed acoustic solutions. The software used for the simulations is EASE (Enhanced Acoustic Simulator for Engineers).

La influencia en el aislamiento acústicoa ruido aéreo de los aireadores en las ventanas compactas

En la actualidad, el crecimiento de la población urbana, el incremento de la demanda energética junto al desarrollo tecnológico impulsado en los últimos veinte años han originado un estudio y replanteamiento de los sistemas constructivos empleados. Como consecuencia se han establecido nuevos marcos normativos, marcando nuevos objetivos de confort y de demanda energética. En España, el Código Técnico de la Edificación (aprobado en el Real Decreto 314/2006 de 17 de Marzo) es el marco normativo que establece las exigencias que se deben cumplir al proyectar construir, usar, mantener y conservar los edificios, incluidas sus instalaciones, con el fin de asegurar la calidad, seguridad y salud del usuario, respetando en todo momento su entorno. Para asegurar el cumplimiento de las exigencias del Código Técnico de la Edificación (CTE), se han elaborado diferentes Documentos Básicos (DB). Entre ellos están los documentos básicos DB HR-Protección frente al ruido y el DB HS-Salubridad. En el DB HS 3 Calidad del aire interior, se establecen las condiciones que deben de adoptarse para que los recintos de los edificios se puedan ventilar adecuadamente, eliminando los contaminantes que se produzcan de forma habitual durante un uso normal de los edificios, de forma que se aporte un caudal suficiente de aire exterior y se garantice la extracción y expulsión del aire viciado por los contaminantes. En el apartado 3.1, Condiciones generales de los sistemas de ventilación, se indica que las viviendas deben disponer de un sistema general de ventilación donde el aire debe circular desde los locales secos a los húmedos. Para ello los comedores, los dormitorios y las salas de estar deben de disponer de aberturas de admisión, pudiéndose resolver esta cuestión técnica con diversas soluciones. El DB HR Protección frente al ruido del CTE, establece unos valores del aislamiento acústico a ruido aéreo, entre un recinto protegido y el exterior, en función del uso del edificio y del nivel sonoro continuo equivalente día, Ld de la zona donde se ubique el edificio. El hacer compatibles el cumplimiento de las exigencias de los dos Documentos Básicos anteriormente citados, origina algunas dificultades en los proyectos de edificación actuales. Los proyectistas tienen que recurrir en la mayoría de los casos a nuevos sistemas constructivos o duplicaciones de soluciones existentes, evitando la manipulación de los elementos de regulación de entrada de aire en las viviendas. El objetivo fundamental de la Tesis presentada es el estudio de los efectos que producen la colocación de sistemas de aireación permanente en el aislamiento acústico a ruido aéreo de las ventanas compactas. Se comprueba la influencia de cada uno de los componentes de la ventana compacta: perfiles, unidades de vidrio, sistema de apertura, cajón de persiana, persiana, aireadores, etc. en el aislamiento a ruido aéreo del sistema completo. Los ensayos acústicos se han realizado mediante dos métodos: conforme a la norma UNE-EN ISO 10140-2:2011 Medición en laboratorio del aislamiento acústico al ruido aéreo de los elementos de construcción y mediante intensimetría acústica acorde a la norma UNE-EN ISO 15186-1:2004 Medición del aislamiento acústico en los edificios y de los elementos de construcción utilizando intensidad sonora. Los resultados obtenidos podrán ser de gran utilidad para todos los profesionales que intervienen en el proceso edificatorio: arquitectos, ingenieros, instaladores, promotores, fabricantes de productos, etc., tanto en la obra nueva como en la rehabilitación. En un futuro, podrían incorporarse a los Catálogos y Documentos de Aplicación del CTE, así como a los nuevos programas informáticos de diseño y aislamiento acústico. Con el conocimiento adquirido y su aplicación, se contribuirá a la mejora de la calidad de una edificación más sostenible y eficiente. Se incrementará la productividad y la competitividad de los fabricantes de materiales y sistemas constructivos, aumentando el grado de satisfacción del usuario final con el consiguiente aumento de la calidad de vida de los ciudadanos. También se ampliará el conocimiento técnico de este tipo de sistemas y la compatibilidad entre las distintas exigencias marcadas por la normativa. ABSTRACT At present, the urban population growth, the increase of energy demand and the technological development in the last twenty years have led to a rethinking of the used building systems. As a result, new regulatory frameworks have been established, setting new goals of comfort and energy demand. In Spain, the Building Code, Código Técnico de la Edificación (CTE) (RD 314/2006 of March 17th) is the regulatory framework that establishes the requirements to be met by projecting, building, using, maintaining and preserving buildings, including its facilities in order to ensure the quality, safety and health of the user, always respecting the environment. To ensure compliance with the requirements of the CTE, different technical requirements Documentos básicos (DB) have been developed. Among them, are the DB-HR-Protection against noise and DB-HS-Health. In the DB-HS- part3, Indoor Air Quality, are set the conditions needed to be taken into consideration so that the building enclosures can be adequately ventilated, eliminating pollutants that occur regularly during normal use of the buildings, so that a sufficient airflow of outdoor is supplied and a removal and extraction of stale air pollutants is guaranteed. In section 3.1, General Terms of ventilation systems, is indicated that dwellings must have a general ventilation system where air can circulate from dry to wet enclosures. For this, dining rooms, bedrooms and living rooms should have air intake, being able to resolve this technical issue with various solutions. The DB-HR Protection against noise, provides sound insulation values of airborne sound transmission between a protected room and the outside, depending on the use of the building and the equivalent continuous sound level day, Ld, in the area where the building is located. Satisfying the requirements of the two requirements mentioned above causes some difficulties in current building project. Designers have to rely in most cases, to new construction elements or duplicate existing solutions, avoiding the manipulation of the air intakes elements. The main objective of this Thesis is the study of the effects of permanent intakes systems in the acoustic insulation against airborne noise transmission in compact windows. The influence of each of the components of the compact window is determined: frames, glass units, opening systems, shutter box, trickle vents, etc. in the airborne sound insulation of the entire system. The acoustic survey were performed using two methods: UNE-EN ISO 10140-2: 2011 Laboratory measurements of sound insulation of building elements and UNE-EN ISO 15186-1:2004 Measurement of sound insulation in buildings and of building elements using sound intensity. The obtained results may be useful for all professionals involved in the building process: architects, engineers, installers, developers, manufacturers, etc. in the new construction developments and in rehabilitation. In the future, it could be added to building catalogues and applications of the Spanish Building Code, as well as to the new design and sound insulation software. With the acquired knowledge and its application, there will be a contribution to improve the quality of a more sustainable and efficient construction. Productivity and competitiveness of manufacturers of building materials and components will improve, increasing the degree of satisfaction of the final user with a consequent increase in the quality of life of citizens. Technical knowledge of such systems and compatibility between the various requirements set by the legislation will also expand.

Análisis experimental de las transmisiones indirectas en particiones de doble hoja de fábrica de ladrillo, propuesta de métodos de cuantificación para la mejora del aislamiento acústico

Esta investigación aborda el estudio de la influencia de las uniones en el aislamiento acústico a ruido aéreo en los edificios y el análisis de las transmisiones indirectas producidas en particiones de dos hojas de ladrillo cerámico sobre bandas elásticas. La transmisión de ruido entre dos recintos separados por una partición se produce por dos vías: La vía directa a través del elemento que separa los dos recintos y la vía indirecta, a través de los elementos de flanco, como forjados, particiones, fachadas, etc. que conectados a dicho elemento de separación, vibran en presencia del campo acústico transmitiendo sus vibraciones al recinto receptor. Si las transmisiones indirectas son dominantes, el aislamiento acústico “in situ” puede ser menor que el esperado. El parámetro que expresa la atenuación acústica en las uniones es el índice de reducción vibracional en la unión o Kij. Éste parámetro se utiliza en los métodos de cálculo del aislamiento acústico a ruido aéreo, que permiten la justificación del cumplimiento de la normativa actual, el Documento Básico DB HR Protección frente al ruido del CTE. La determinación de los índices Kij de las uniones es una cuestión que debe abordarse de forma experimental. Existen diferentes expresiones empíricas obtenidas en varios laboratorios europeos que permiten el cálculo del índice Kij, pero no se han validado con ensayos realizados en soluciones habituales en la construcción española, como las estudiadas en este trabajo. El objetivo de este trabajo es la medida, análisis y cuantificación de las transmisiones indirectas producidas en las uniones de elementos de dos hojas de fábrica de ladrillo cerámico. Se ha recurrido a una campaña de ensayos en la que se reproducían las condiciones de un edificio real y se ha medido el aislamiento acústico a ruido aéreo y los índices Kij de diferentes configuraciones de uniones. Del análisis de los resultados, se demuestra que el aislamiento acústico a ruido aéreo depende de las uniones, pudiéndose obtener mejoras significativas al variar la forma de unión entre los elementos constructivos. Las mejoras de aislamiento acústico están relacionadas con un buen diseño de las uniones y con valores elevados del índice Kij. Este trabajo aporta valores experimentales de Kij para soluciones de fábrica de ladrillo y pone en discusión los valores teóricos que actualmente aparecen en la normativa vigente. ABSTRACT This research work deals with the effects of junction construction details on airborne sound insulation in buildings and the analysis of flanking transmissions across double ceramic brick walls with elastic interlayers. The sound transmission between two adjacent rooms comprises two paths: the direct path, caused by the incident sound on a separating wall, and the indirect path, through flanking elements connected to the separating wall, such as floors, internal walls, ceilings, etc. Flanking elements vibrate when excited in the sound field, thus transferring sound via structure borne to the receiving room. Dominant flanking transmissions can decrease the field sound insulation performance of the building. The vibration reduction index, Kij. expresses the acoustic attenuation of construction joints. This is an input parameter in the calculation models designed to estimate the airborne sound insulation between adjoining rooms in buildings. These models are used to comply with the acoustic requirements set by Basic Document DB HR Protection against noise included in the Spanish Building Code. The characterization of Kij. must be addressed experimentally by means of measurements. The available empirical Kij. formulae were developed in different European laboratories, but they have not been validated with standard tests performed on common Spanish walls, such as those studied in this work. The aim of this work is the measurement, analysis and quantification of indirect transmissions though joints of double ceramic brick walls. Airborne sound insulation tests and Kij measurements were performed in a laboratory which emulated the conditions of a real building. These tests were performed in different partitions whose joints were modified. It follows from the analysis of the results that airborne sound insulation depends strongly on the design of joints. Sound insulation improves when the joints between construction elements are modified to eliminate acoustic bridges. The increase in sound insulation corresponds to best practice design of joints and to high Kij values. This research work provides experimental Kij data of double ceramic brick walls and the results put in discussion the theoretical values set in the current Standards.

O ESTUDANTE DA EAD (EDUCAÇÃO A DISTÂNCIA): UM ESTUDO DE PERFIL E INTERAÇÃO GERACIONAL

A aprendizagem formal e tradicional tem dado lugar a um cenário desafiador no qual educador e educando não comungam do mesmo espaço físico. A Educação a Distância (EAD), ainda é vista como uma solução que agrega cada vez mais alunos de diferentes idades que desejam uma graduação de ensino superior ou a continuidade dela. A pesquisa com o título: “O estudante da EAD (educação a distância): um estudo de perfil e interação geracional” propõe conhecer as características do perfil atual do estudante da EAD, abordando o diálogo entre as gerações no ambiente social escolar. O enfoque da pesquisa é qualitativa, exploratória e descritiva com dados que foram coletados através de entrevista com 08 alunos das gerações X e Y para assim entender se este perfil tem sido renovado com alunos mais jovens, do que a faixa etária de 25 a 45 anos. O resultado demonstra que alunos na faixa de 17 a 24 anos a cada ano aumentam 1% das matrículas. Já a faixa de 25 a 45 anos prevalece com 70% das matrículas. Portanto, este resultado revela que o perfil do aluno EAD ainda é o do jovem adulto, para adulto mais experiente, que busca a graduação com o propósito de progressão no ambiente profissional. As duas gerações citadas geração X e geração Y, mesmo em contextos históricos diferenciados de valores, crenças e comportamentos participam atualmente de uma transformação social que contempla os meios de produção do trabalho, a formação educacional e as relações sociais. O diálogo intergeracional direciona a um aprendizado compartilhado, participativo na troca de experiências mutuas. Para a geração X o jovem atual não é mais nomeado como o que precisa escutar e aprender, mas tem muito a partilhar, principalmente diante da facilidade com os meios tecnológicos. E para a geração Y, na partilha não há barreiras de idade, mas a segurança de interagir e se comunicar diante da troca de experiências