Modelling of Ultraviolet and Vissible Emissions in Comets

Comets are the spectacular objects in the night sky since the dawn of mankind. Due to their giant apparitions and enigmatic behavior, followed by coincidental calamities, they were termed as notorious and called as `bad omens'. With a systematic study of these objects modern scienti c community understood that these objects are part of our solar system. Comets are believed to be remnant bodies of at the end of evolution of solar system and possess the material of solar nebula. Hence, these are considered as most pristine objects which can provide the information about the conditions of solar nebula. These are small bodies of our solar system, with a typical size of about a kilometer to a few tens of kilometers orbiting the Sun in highly elliptical orbits. The solid body of a comet is nucleus which is a conglomerated mixture of water ice, dust and some other gases. When the cometary nucleus advances towards the Sun in its orbit the ices sublimates and produces the gaseous envelope around the nucleus which is called coma. The gravity of cometary nucleus is very small and hence can not in uence the motion of gases in the cometary coma. Though the cometary nucleus is a few kilometers in size they can produce a transient, extensive, and expanding atmosphere with size several orders of magnitude larger in space. By ejecting gas and dust into space comets became the most active members of the solar system. The solar radiation and the solar wind in uences the motion of dust and ions and produces dust and ion tails, respectively. Comets have been observed in di erent spectral regions from rocket, ground and space borne optical instruments. The observed emission intensities are used to quantify the chemical abundances of di erent species in the comets. The study of various physical and chemical processes that govern these emissions is essential before estimating chemical abundances in the coma. Cameron band emission of CO molecule has been used to derive CO2 abundance in the comets based on the assumption that photodissociation of CO2 mainly produces these emissions. Similarly, the atomic oxygen visible emissions have been used to probe H2O in the cometary coma. The observed green ([OI] 5577 A) to red-doublet emission ([OI] 6300 and 6364 A) ratio has been used to con rm H2O as the parent species of these emissions. In this thesis a model is developed to understand the photochemistry of these emissions and applied to several comets. The model calculated emission intensities are compared with the observations done by space borne instruments like International Ultraviolet Explorer (IUE) and Hubble Space Telescope (HST) and also by various ground based telescopes.

Studies on the horizontal and vertical distribution of clouds and their impact on energetics of the Atmosphere over the Indian Region

Motivation for the present study is to improve the scienti c understanding on the prominent gap areas in the average three-dimensional distribution of clouds and their impact on the energetics of the earth-atmosphere system. This study is focused on the Indian subcontinent and the surrounding oceans bound within the latitude-longitude bands of 30 S to 30 N and 30 E to 110 E. Main objectives of this study are to : (i) estimate the monthly and seasonal mean vertical distributions of clouds and their spatial variations (which provide the monthly and seasonal mean 3-dimensional distributions of clouds) using multi-year satellite data and investigate their association with the general circulation of the atmosphere, (ii) investigate the characteristics of the `pool of inhibited cloudiness' that appear over the southwest Bay of Bengal during the Asian summer monsoon season (revealed by the 3-dimensional distribution of clouds) and identify the potential mechanisms for its genesis, (iii) investigate the role of SST and atmospheric thermo-dynamical parameters in regulating the vertical development and distribution of clouds, (iv) investigate the vertical distribution of tropical cirrus clouds and their descending nature using lidar observations at Thiruvananthapuram (8.5 N, 77 E), a tropical coastal station at the southwest Peninsular India, and (v) assessment of the impact of clouds on the energetics of the earth-atmosphere system, by estimating the regional seasonal mean cloud radiative forcing at top-of-the-atmosphere (TOA) and latent heating of the atmosphere by precipitating clouds using satellite data

Studies on the use of Nanokaolin, MWCNT and Graphene in NBR and SBR

The current research investigates the possibility of using unmodified and modified nanokaolin, multiwalled carbon nanotube (MWCNT) and graphene as fillers to impart enhancement in mechanical, thermal, and electrical properties to the elastomers. Taking advantage of latex blending method, nanoclay, MWCNT and graphene dispersions, prepared by ultra sound sonication are dispersed in polymer latices. The improvement in material properties indicated better interaction between filler and the polymer.MWCNT and graphene imparted electrical conductivity with simultaneous improvement in mechanical properties. Layered silicates prepared by microwave method also significantly improve the mechanical properties of the nanocomposites. The thesis entitled ‘Studies on the use of Nanokaolin, MWCNT and Graphene in NBR and SBR’ consists of ten chapters. The first chapter is a concise introduction of nanocomposites, nanofillers, elastomeric matrices and applications of polymer nanocomposites. The state-of-art research in elastomer based nanocomposites is also presented. At the end of this chapter the main objectives of the work are mentioned. Chapter 2 outlines the specifications of various materials used, details of experimental techniques employed for preparing and characterizing nanocomposites. Chapter3 includes characterization of the nanofillers, optimsation of cure time of latex based composites and the methods used for the preparation of latex based and dry rubber based nanocomposites. Chapter4 presents the reinforcing effect of the nanofillers in XNBR latex and the characterization of the nanocomposites. Chapter5 comprises the effect of nanofillers on the properties of SBR latex and their characterization Chapter 6 deals with the study of cure characteristics, mechanical and thermal properties and the characterization of NBR based nanocomposites. Chapter7 is the microwave studies of MWCNT and graphene filled elastomeric nanocomposites. Chapter 8 gives details of the preparation of layered silicates, their characterization and use in different elastomeric matrices. Chapter 9 is the study of mechanical properties of nanoclay incorporated nitrile gloves .Chapter 10 presents the summary and conclusions of the investigation.

Piezoelectric Ultrasonic Micromotors

This report describes development of micro-fabricated piezoelectric ultrasonic motors and bulk-ceramic piezoelectric ultrasonic motors. Ultrasonic motors offer the advantage of low speed, high torque operation without the need for gears. They can be made compact and lightweight and provide a holding torque in the absence of applied power, due to the traveling wave frictional coupling mechanism between the rotor and the stator. This report covers modeling, simulation, fabrication and testing of ultrasonic motors. Design of experiments methods were also utilized to find optimal motor parameters. A suite of 8 mm diameter x 3 mm tall motors were machined for these studies and maximum stall torques as large as 10^(- 3) Nm, maximum no-load speeds of 1710 rpm and peak power outputs of 27 mW were realized. Aditionally, this report describes the implementation of a microfabricated ultrasonic motor using thin-film lead zirconate titanate. In a joint project with the Pennsylvania State University Materials Research Laboratory and MIT Lincoln Laboratory, 2 mm and 5 mm diameter stator structures were fabricated on 1 micron thick silicon nitride membranes. Small glass lenses placed down on top spun at 100-300 rpm with 4 V excitation at 90 kHz. The large power densities and stall torques of these piezoelectric ultrasonic motors offer tremendous promis for integrated machines: complete intelligent, electro-mechanical autonomous systems mass-produced in a single fabrication process.

Asuntos estratégicos, seguridad y defensa

Esta admirable colección de ensayos del pensador estratégico colombiano, conduce al lector a contemplar una perspectiva no muy común en esta época. Predomina ahora una fascinación con lo táctico y lo operacional, en función de la difusión de una perspectiva detallada de cada instancia de acción policial o castrense, en medios orientados a una audiencia masiva y popular.Se puede decir que los oficiales gubernamentales, desde funcionarios de línea hasta los rangos más altos, suelen saltar de crisis en crisis sin el beneficio de una bien considerada estrategia que mire hacia el futuro y que sirva de estrella norte para acciones previsoras. La visión estratégica elaborada en la gama de temas de esta antología llama la atención al hecho que los intérpretes académicos pueden normalizar y ampliar la debida estructuración de argumentos para tal previsión y para el bienestar de un mundo de Estados más entrelazados e interdependientes que nunca.

Subsurface drip irrigation emitter spacing effects on soil water redistribution, corn yield and water productivity

Emitter spacings of 0.3 to 0.6 m are commonly used for subsurface drip irrigation (SDI) of corn on the deep, silt loam soils of the U.S. Great Plains. Subsurface drip irrigation emitter spacings of 0.3, 0.6, 0.9 and 1.2 m were examined for the resulting differences in soil water redistribution, corn grain yield, yield components, seasonal water use, and water productivity in a 4‐year field study (2005 through 2008) at the Kansas State University Northwest Research‐Extension Center, Colby, Kansas. The results indicate that there is increased preferential water movement along the dripline (parallel) as compared to perpendicular to the dripline and that this phenomenon partially compensates for wider emitter spacings in terms of soil water redistribution. Corn yield and water productivity (WP) were not significantly affected by the emitter spacing with application of a full irrigation regime

High-performance infrared narrow-bandpass filters for the Indian National Satellite System meteorological instrument (INSAT-3D)

This paper describes the design and manufacture of a set of precision cooled (210K) narrow-bandpass filters for the infrared imager and sounder on the Indian Space Research Organisation (ISRO) INSAT-3D meteorological satellite. We discuss the basis for the choice of multilayer coating designs and materials for 21 differing filter channels, together with their temperature-dependence, thin film deposition technologies, substrate metrology, and environmental durability performance. (C) 2008 Optical Society of America.

The regulation of seasonal flowering in the Rosaceae

Molecular mechanisms regulating the flowering process have been extensively studied in model annual plants; in perennials, however, understanding of the molecular mechanisms controlling flowering has just started to emerge. Here we review the current state of flowering research in perennial plants of the rose family (Rosaceae), which is one of the most economically important families of horticultural plants. Strawberry (Fragaria spp.), raspberry (Rubus spp.), rose (Rosa spp.), and apple (Malus spp.) are used to illustrate how photoperiod and temperature control seasonal flowering in rosaceous crops. We highlight recent molecular studies which have revealed homologues of TERMINAL FLOWER1 (TFL1) to be major regulators of both the juvenile to adult, and the vegetative to reproductive transitions in various rosaceous species. Additionally, recent advances in understanding of the regulation of TFL1 are discussed.

Effect of fall-grazed sericea lespedeza (Lespedeza cuneata) on gastrointestinal nematode infections of growing goats

High prevalence of anthelmintic-resistant gastrointestinal nematodes (GIN) in goats has increased pressure to find effective, alternative non-synthetic control methods, one of which is adding forage of the high condensed tannin (CT) legume sericea lespedeza (SL; Lespedeza cuneata) to the animal's diet. Previous work has demonstrated good efficacy of dried SL (hay, pellets) against small ruminant GIN, but information is lacking on consumption of fresh SL, particularly during the late summer–autumn period in the southern USA when perennial warm-season grass pastures are often low in quality. A study was designed to determine the effects of autumn (September–November) consumption of fresh SL forage, grass pasture (predominantly bermudagrass, BG; Cynodon dactylon), or a combination of SL + BG forage by young goats [intact male Spanish kids, 9 months old (20.7 ± 1.1 kg), n = 10/treatment group] on their GIN infection status. Three forage paddocks (0.40 ha) were set up at the Fort Valley State University Agricultural Research Station (Fort Valley, GA) for an 8-week trial. The goats in each paddock were supplemented with a commercial feed pellet at 0.45 kg/head/d for the first 4 weeks of the trial, and 0.27 kg/head/d for the final 4 weeks. Forage samples taken at the start of the trial were analyzed for crude protein (CP), neutral detergent fiber (NDF), and acid detergent fiber (ADF) content, and a separate set of SL samples was analyzed for CT in leaves, stems, and whole plant using the benzyl mercaptan thiolysis method. Animal weights were taken at the start and end of the trial, and fecal and blood samples were collected weekly for determination of fecal egg counts (FEC) and packed cell volume (PCV), respectively. Adult GIN was recovered from the abomasum and small intestines of all goats at the end of the experiment for counting and speciation. The CP levels were highest for SL forage, intermediate for SL + BG, and lowest for BG forage samples, while NDF and ADF values were the opposite, with highest levels in BG and lowest in SL forage samples. Sericea lespedeza leaves had more CT than stems (16.0 g vs. 3.3 g/100 g dry weight), a slightly higher percentage of PDs (98% vs. 94%, respectively) and polymers of larger mean degrees of polymerization (42 vs. 18, respectively). There were no differences in average daily gain or blood PCV between the treatment groups, but SL goats had lower FEC (P < 0.05) than the BG or SL + BG forage goats throughout most of the trial. The SL + BG goats had lower FEC than the BG forage animals by the end of the trial (week 8, P < 0.05). The SL goats had lower numbers (P < 0.05) of male Haemonchus contortus and tended to have fewer female (P < 0.10) and total (P < 0.07) H. contortus compared with the BG goats. The predominant GIN in all the goats was Trichostrongylus colubriformis (73% of total GIN). As a low-input forage with activity against pathogenic GIN (H. contortus), SL has a potential to reduce producers’ dependence upon synthetic anthelmintics and also to fill the autumn ‘window’ in good-quality fresh forages for goat grazing in the southern USA.

Enterprise Architecture adoption method for Higher Education Institutions

During the last few years Enterprise Architecture has received increasing attention among industry and academia. Enterprise Architecture (EA) can be defined as (i) a formal description of the current and future state(s) of an organisation, and (ii) a managed change between these states to meet organisation’s stakeholders’ goals and to create value to the organisation. By adopting EA, organisations may gain a number of benefits such as better decision making, increased revenues and cost reductions, and alignment of business and IT. To increase the performance of public sector operations, and to improve public services and their availability, the Finnish Parliament has ratified the Act on Information Management Governance in Public Administration in 2011. The Act mandates public sector organisations to start adopting EA by 2014, including Higher Education Institutions (HEIs). Despite the benefits of EA and the Act, EA adoption level and maturity in Finnish HEIs are low. This is partly caused by the fact that EA adoption has been found to be difficult. Thus there is a need for a solution to help organisations to adopt EA successfully. This thesis follows Design Science (DS) approach to improve traditional EA adoption method in order to increase the likelihood of successful adoption. First a model is developed to explain the change resistance during EA adoption. To find out problems associated with EA adoption, an EA-pilot conducted in 2010 among 12 Finnish HEIs was analysed using the model. It was found that most of the problems were caused by misunderstood EA concepts, attitudes, and lack of skills. The traditional EA adoption method does not pay attention to these. To overcome the limitations of the traditional EA adoption method, an improved EA Adoption Method (EAAM) is introduced. By following EAAM, organisations may increase the likelihood of successful EA adoption. EAAM helps in acquiring the mandate for EA adoption from top-management, which has been found to be crucial to success. It also helps in supporting individual and organisational learning, which has also found to be essential in successful adoption.

Re-examining the U.K.'s greatest tornado outbreak: forecasting the limited extent of tornadoes along a cold front

On 23 November 1981, a strong cold front swept across the U.K., producing tornadoes from the west to the east coasts. An extensive campaign to collect tornado reports by the Tornado and Storm Research Organisation (TORRO) resulted in 104 reports, the largest U.K. outbreak. The front was simulated with a convection-permitting numerical model down to 200-m horizontal grid spacing to better understand its evolution and meteorological environment. The event was typical of tornadoes in the U.K., with convective available potential energy (CAPE) less than 150 J kg-1, 0-1-km wind shear of 10-20 m s-1, and a narrow cold-frontal rainband forming precipitation cores and gaps. A line of cyclonic absolute vorticity existed along the front, with maxima as large as 0.04 s-1. Some hook-shaped misovortices bore kinematic similarity to supercells. The narrow swath along which the line was tornadic was bounded on the equatorward side by weak vorticity along the line and on the poleward side by zero CAPE, enclosing a region where the environment was otherwise favorable for tornadogenesis. To determine if the 104 tornado reports were plausible, first possible duplicate reports were eliminated, resulting in as few as 58 tornadoes to as many as 90. Second, the number of possible parent misovortices that may have spawned tornadoes is estimated from model output. The number of plausible tornado reports in the 200-m grid-spacing domain was 22 and as many as 44, whereas the model simulation was used to estimate 30 possible parent misovortices within this domain. These results suggest that 90 reports was plausible.

Assessment of inbreeding depression in a Guzerat dairy herd: Effects of individual increase in inbreeding coefficients on production and reproduction

Influences of inbreeding on daily milk yield (DMY), age at first calving (AFC), and calving intervals (CI) were determined on a highly inbred zebu dairy subpopulation of the Guzerat breed. Variance components were estimated using animal models in single-trait analyses. Two approaches were employed to estimate inbreeding depression: using individual increase in inbreeding coefficients or using inbreeding coefficients as possible covariates included in the statistical models. The pedigree file included 9,915 animals, of which 9,055 were inbred, with an average inbreeding coefficient of 15.2%. The maximum inbreeding coefficient observed was 49.45%, and the average inbreeding for the females still in the herd during the analysis was 26.42%. Heritability estimates were 0.27 for DMY and 0.38 for AFC. The genetic variance ratio estimated with the random regression model for CI ranged around 0.10. Increased inbreeding caused poorer performance in DMY, AFC, and CI. However, some of the cows with the highest milk yield were among the highly inbred animals in this subpopulation. Individual increase in inbreeding used as a covariate in the statistical models accounted for inbreeding depression while avoiding overestimation that may result when fitting inbreeding coefficients.

Impacts of climate changes on crop physiology and food quality

Carbon emissions related to human activities have been significantly contributing to the elevation of atmospheric [CO(2)] and temperature. More recently, carbon emissions have greatly accelerated, thus much stronger effects on crops are expected. Here, we revise literature data concerning the physiological effects of CO(2) enrichment and temperature rise on crop species. We discuss the main advantages and limitations of the most used CO(2)-enrichment technologies, the Open-Top Chambers (OTCs) and the Free-Air Carbon Enrichment (FACE). Within the conditions expected for the next few years, the physiological responses of crops suggest that they will grow faster, with slight changes in development, such as flowering and fruiting, depending on the species. There is growing evidence suggesting that C(3) crops are likely to produce more harvestable products and that both C(3) and C(4) crops are likely to use less water with rising atmospheric [CO(2)] in the absence of stressful conditions. However, the beneficial direct impact of elevated [CO(2)] on crop yield can be offset by other effects of climate change, such as elevated temperatures and altered patterns of precipitation. Changes in food quality in a warmer, high-CO(2) world are to be expected, e.g., decreased protein and mineral nutrient concentrations, as well as altered lipid composition. We point out that studies related to changes in crop yield and food quality as a consequence of global climatic changes should be priority areas for further studies, particularly because they will be increasingly associated with food security. (c) 2009 Elsevier Ltd. All rights reserved.

Anabolic-androgenic steroid treatment induces behavioral disinhibition and downregulation of serotonin receptor messenger RNA in the prefrontal cortex and amygdala of male mice

Nandrolone is an anabolic-androgenic steroid (AAS) that is highly abused by individuals seeking enhanced physical strength or body appearance. Supraphysiological doses of this synthetic testosterone derivative have been associated with many physical and psychiatric adverse effects, particularly episodes of impulsiveness and overt aggressive behavior. As the neural mechanisms underlying AAS-induced behavioral disinhibition are unknown, we investigated the status of serotonergic system-related transcripts in several brain areas of mice receiving prolonged nandrolone administration. Male C57BL/6J mice received 15 mg/kg of nandrolone decanoate subcutaneously once daily for 28 days, and different sets of animals were used to investigate motor-related and emotion-related behaviors or 5-HT-related messenger RNA (mRNA) levels by real-time quantitative polymerase chain reaction. AAS-injected mice had increased body weight, were more active and displayed anxious-like behaviors in novel environments. They exhibited reduced immobility in the forced swim test, a higher probability of being aggressive and more readily attacked opponents. AAS treatment substantially reduced mRNA levels of most investigated postsynaptic 5-HT receptors in the amygdala and prefrontal cortex. Interestingly, the 5-HT(1B) mRNA level was further reduced in the hippocampus and hypothalamus. There was no alteration of 5-HT system transcript levels in the midbrain. In conclusion, high doses of AAS nandrolone in male mice recapitulate the behavioral disinhibition observed in abusers. Furthermore, these high doses downregulate 5-HT receptor mRNA levels in the amygdala and prefrontal cortex. Our combined findings suggest these areas as critical sites for AAS-induced effects and a possible role for the 5-HT(1B) receptor in the observed behavioral disinhibition.