The Multidirectional Memory of Charlie Hebdo

This article will discuss notions and concepts of remembering in the aftermath of the Charlie Hebdo attacks. Much has been written about the immediate response to the attacks, both commending the collective spirit of unity that defined the ‘marche républicaine’ of 11 January 2015, and criticising the alleged hypocrisy and cynicism of, most notably, the political figures that took to the streets that day, hand in hand. I will consider a selection of the memory practices that have emerged since then, notably on the anniversary of the event. This demonstration of memory provides key insights into the form and manner of remembering within a particular cultural group, but also reflects how the present moment is integral to our understanding of memory. The purpose of this article is to consider how official and non-official remembering of Charlie Hebdo can intertwine as well as pull in separate directions. A focus on the politics, the language, the aesthetics and the geography of commemorative activities in this article will enable an appreciation of the multidirectional character of remembering Charlie Hebdo.

Inputs from a mercury-contaminated lagoon: impact on the nearshore waters of the Atlantic Ocean

Ria de Aveiro, a Portuguese coastal lagoon that exchanges water with the Atlantic Ocean, received the effluent from a chlor-alkali industry for over 50 years; consequently several tons of mercury had been buried in the sediments of an inner basin. To assess the importance (and seasonal variation) of the lagoon waters as carriers of mercury to the nearby coastal area, we measured total mercury levels in several compartments: in surface sediments, in surface and deep waters (including dissolved and particulate matter!, and in biota. Dissolved (reactive and total) mercury concentrations both in surface and deep waters were low (<1 to 15 ng L '). Mean mercury values in suspended particulate matter varied hetween 0.2 and 0.6 jxg g ' and in sediments between 1 and 9 ng g '. Aquatic organisms displayed levels below regulatory limits but exhibited some bioaccumulation of mercury, with concentrations ranging from 0.05 to 0.8 ^ig g ' Idry weight (dw)|. No seasonal pattern was found in this study for mercury-related determinations. Levels found in the estuary mouth during ebb tide provide evidence for the transport of mercury to the coastal zone. No significant changes in the partition of mercury between dissolved and particulate phases were found in the coastal waters in comparison with the values found in the estuary mouth. In spite of the high levels of mercury found inside some areas of the lagoon, the wide web of islands and channels allows some spreading of contaminants before they reach the coastal waters. Moreover, the low efficiency of local marine sediments in trapping mercury contributes to a dilution of mercury transported in suspended particulate matter over a broader area, reducing the impact in the nearby manne coastal zone.

Dynamic load balancing of distributed memory parallel computational mechanics using unstructured meshes for multi-physical modelling

As the complexity of parallel applications increase, the performance limitations resulting from computational load imbalance become dominant. Mapping the problem space to the processors in a parallel machine in a manner that balances the workload of each processors will typically reduce the run-time. In many cases the computation time required for a given calculation cannot be predetermined even at run-time and so static partition of the problem returns poor performance. For problems in which the computational load across the discretisation is dynamic and inhomogeneous, for example multi-physics problems involving fluid and solid mechanics with phase changes, the workload for a static subdomain will change over the course of a computation and cannot be estimated beforehand. For such applications the mapping of loads to process is required to change dynamically, at run-time in order to maintain reasonable efficiency. The issue of dynamic load balancing are examined in the context of PHYSICA, a three dimensional unstructured mesh multi-physics continuum mechanics computational modelling code.

Distribution of neutral prilocaine in a phospholipid bilayer: Insights from molecular dynamics simulations

In this work, we report a 20-ns constant pressure molecular dynamics simulation of prilocaine (PLC), in amine-amide local anesthetic, in a hydrated liquid crystal bilayer of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine. The partition of PLC induces the lateral expansion of the bilayer and a concomitant contraction in its thickness. PLC molecules are preferentially found in the hydrophobic acyl chains region, with a maximum probability at similar to 12 angstrom from the center of the bilayer (between the C(4) and C(5) methylene groups). A decrease in the acyl chain segmental order parameter, vertical bar S-CD vertical bar, compared to neat bilayers, is found, in good agreement with experimental H-2-NMR studies. The decrease in vertical bar S-CD vertical bar induced by PLC is attributed to a larger accessible volume per lipid in the acyl chain region. (C) 2008 Wiley Periodicals, Inc.

Response of Core Microbial Consortia to Chronic Hydrocarbon Contaminations in Coastal Sediment Habitats

Traditionally, microbial surveys investigating the effect of chronic anthropogenic pressure such as polyaromatic hydrocarbons (PAHs) contaminations consider just the alpha and beta diversity and ignore the interactions among the different taxa forming the microbial community. Here, we investigated the ecological relationships between the three domains of life (i.e., Bacteria, Archaea, and Eukarya) using 454 pyrosequencing on the 16S rRNA and 18S rRNA genes from chronically impacted and pristine sediments, along the coasts of the Mediterranean Sea (Gulf of Lion, Vermillion coast, Corsica, Bizerte lagoon and Lebanon) and the French Atlantic Ocean (Bay of Biscay and English Channel). Our approach provided a robust ecological framework for the partition of the taxa abundance distribution into 859 core Operational taxonomic units (OTUs) and 6629 satellite OTUs. OTUs forming the core microbial community showed the highest sensitivity to changes in environmental and contaminant variations, with salinity, latitude, temperature, particle size distribution, total organic carbon (TOC) and PAH concentrations as main drivers of community assembly. The core communities were dominated by Gammaproteobacteria and Deltaproteobacteria for Bacteria, by Thaumarchaeota, Bathyarchaeota and Thermoplasmata for Archaea and Metazoa and Dinoflagellata for Eukarya. In order to find associations among microorganisms, we generated a co-occurrence network in which PAHs were found to impact significantly the potential predator – prey relationship in one microbial consortium composed of ciliates and Actinobacteria. Comparison of network topological properties between contaminated and non-contaminated samples showed substantial differences in the network structure and indicated a higher vulnerability to environmental perturbations in the contaminated sediments.

Effects of Drive Speed Modulation on Dynamics of Slender Rotating Structures

Slender rotating structures are used in many mechanical systems. These structures can suffer from undesired vibrations that can affect the components and safety of a system. Furthermore, since some these structures can operate in a harsh environment, installation and operation of sensors that are needed for closed-loop and collocated control schemes may not be feasible. Hence, the need for an open-loop non-collocated scheme for control of the dynamics of these structures. In this work, the effects of drive speed modulation on the dynamics of slender rotating structures are studied. Slender rotating structures are a type of mechanical rotating structures, whose length to diameter ratio is large. For these structures, the torsion mode natural frequencies can be low. In particular, for isotropic structures, the first few torsion mode frequencies can be of the same order as the first few bending mode frequencies. These situations can be conducive for energy transfer amongst bending and torsion modes. Scenarios with torsional vibrations experienced by rotating structures with continuous rotor-stator contact occur in many rotating mechanical systems. Drill strings used in the oil and gas industry are an example of rotating structures whose torsional vibrations can be deleterious to the components of the drilling system. As a novel approach to mitigate undesired vibrations, the effects of adding a sinusoidal excitation to the rotation speed of a drill string are studied. A portion of the drill string located within a borewell is considered and this rotating structure has been modeled as an extended Jeffcott rotor and a sinusoidal excitation has been added to the drive speed of the rotor. After constructing a three-degree-of-freedom model to capture lateral and torsional motions, the equations of motions are reduced to a single differential equation governing torsional vibrations during continuous stator contact. An approximate solution has been obtained by making use of the Method of Direct Partition of Motions with the governing torsional equation of motion. The results showed that for a rotor undergoing forward or backward whirling, the addition of sinusoidal excitation to the drive speed can cause an increase in the equivalent torsional stiffness, smooth the discontinuous friction force at contact, and reduce the regions of negative slope in the friction coefficient variation with respect to speed. Experiments with a scaled drill string apparatus have also been conducted and the experimental results show good agreement with the numerical results obtained from the developed models. These findings suggest that the extended Jeffcott rotordynamics model can be useful for studies of rotor dynamics in situations with continuous rotor-stator contact. Furthermore, the results obtained suggest that the drive speed modulation scheme can have value for attenuating drill-string vibrations.

Effects of the orientation of the mountainside, altitude and varieties on the quality of the coffee beverage from the "Matas de Minas" region, brazilian Southeast.

Based upon qualitative parameters experiments, this study aims to investigate how the elements of the environment, where the coffee is produced, contribute to the final quality of the product. For the analyses, it was used approximately one kilogram of coffee cherry samples collected in 14municipalities previously chosen on the East side of the Minas Gerais State, Brazil. The coffee cherry samples were collected and analyzed for each of the two varieties in four levels of altitude for each exposure side of the mountain in relation to the Sun. The quality of the coffee was evaluated through the analysis of its physical characteristics and sensory analysis, popularly known as "Test of drink or Cupping" carried out by three tasters that belonging to the group of Q -Graders, according to the rules of national and international competitions of the Brazilian Association of Special Coffees (BSCA). Were performed analysis by means descriptive statistics, analysis of variance and multivariate analysis, all of them aiming to study the individual sensor y characteristics of quality of the coffee beverage from the ?Matas de Minas? region. Path coefficient analysis also was carried out for the partition of the phenotypic correlation coefficients into measures of direct and indirect effects, in order to determine the individual sensory characteristics that playeda major role in the beverage final score. The results demonstrat e that it is not possible to concl usively establish the differences among coffees evaluated with basis on varieties and environmental factors previously cited. It can be concluded that it is not recommended to associate the quality of coffee only to a specific factor whether from the environment or being it a specific of the culture of coffee. However, the cafes that were evaluated had intrinsic quality, which were derived from the specific characteristics of the ?Matas de Minas? region where they were grown.

A pre-treatment verification tool for IMRT based on EPID measurements and a GEANT4 back projection application

The aim of this work is to develop software that is capable of back projecting primary fluence images obtained from EPID measurements through phantom and patient geometries in order to calculate 3D dose distributions. In the first instance, we aim to develop a tool for pretreatment verification in IMRT. In our approach, a Geant4 application is used to back project primary fluence values from each EPID pixel towards the source. Each beam is considered to be polyenergetic, with a spectrum obtained from Monte Carlo calculations for the LINAC in question. At each step of the ray tracing process, the energy differential fluence is corrected for attenuation and beam divergence. Subsequently, the TERMA is calculated and accumulated to an energy differential 3D TERMA distribution. This distribution is then convolved with monoenergetic point spread kernels, thus generating energy differential 3D dose distributions. The resulting dose distributions are accumulated to yield the total dose distribution, which can then be used for pre-treatment verification of IMRT plans. Preliminary results were obtained for a test EPID image comprised of 100 9 100 pixels of unity fluence. Back projection of this field into a 30 cm9 30 cm 9 30 cm water phantom was performed, with TERMA distributions obtained in approximately 10 min (running on a single core of a 3 GHz processor). Point spread kernels for monoenergetic photons in water were calculated using a separate Geant4 application. Following convolution and summation, the resulting 3D dose distribution produced familiar build-up and penumbral features. In order to validate the dose model we will use EPID images recorded without any attenuating material in the beam for a number of MLC defined square fields. The dose distributions in water will be calculated and compared to TPS predictions.

Publishing, postage, and prizes : classic Australian children’s literature in the public eye

2012 saw the publication of competing and complementary lines of Australian “classics”: “A&R Australian Classics” (HarperCollins) and “Text Classics” (Text Publishing). While Angus and Robertson were key in establishing a canon of Australian children’s classics in the twentieth century, it was the Text Classics line which included a selection of young people’s titles in their 2013. In turn, Penguin Australia launched a selection of “Australian Children’s Classics”. In so doing, these publishers were drawing on particular literary and visual cultural traditions in Australian children’s literature. Public assertions of a particular selection of children’s books reveals not only contemporary assumptions about desirable childhood experiences but about the operation of nostalgia therein. In encouraging Australian adults to judge books by their covers, such gestures imply that Australian children may be similarly understood. Importantly, the illusion of unity, sameness, and legibility which is promised by circumscribed canons of “classic” children’s literature may well imply a desire for similarly illusory, unified, legible, “classic” childhood. This paper attends to public attempts to materialise (and legitimise) a canon of classic Australian children’s literature. In particular, it considers the ways in which publishing, postage stamps, and book awards make visible a range of children’s books, but do so in order to either fix or efface the content or meaning of the books themselves. Moving between assertions of the best books for children from the 1980s to today, and of the social values circulated within those books, this paper considers the possibilities and problematics of an Australian children’s canon.

Open problem: Shifting experts on easy data

A number of online algorithms have been developed that have small additional loss (regret) compared to the best “shifting expert”. In this model, there is a set of experts and the comparator is the best partition of the trial sequence into a small number of segments, where the expert of smallest loss is chosen in each segment. The regret is typically defined for worst-case data / loss sequences. There has been a recent surge of interest in online algorithms that combine good worst-case guarantees with much improved performance on easy data. A practically relevant class of easy data is the case when the loss of each expert is iid and the best and second best experts have a gap between their mean loss. In the full information setting, the FlipFlop algorithm by De Rooij et al. (2014) combines the best of the iid optimal Follow-The-Leader (FL) and the worst-case-safe Hedge algorithms, whereas in the bandit information case SAO by Bubeck and Slivkins (2012) competes with the iid optimal UCB and the worst-case-safe EXP3. We ask the same question for the shifting expert problem. First, we ask what are the simple and efficient algorithms for the shifting experts problem when the loss sequence in each segment is iid with respect to a fixed but unknown distribution. Second, we ask how to efficiently unite the performance of such algorithms on easy data with worst-case robustness. A particular intriguing open problem is the case when the comparator shifts within a small subset of experts from a large set under the assumption that the losses in each segment are iid.

La coordination et les phrases juxtaposées en français

Coordination and juxtaposed sentences The object of this study is the examination of the relations between juxtaposed clauses in contemporary French. The matter in question is sentences which are composed of several clauses adjoined without a conjunction or other connector, as in: Je détournai les yeux, mon c ur se mit à battre. The aim of the study is to determine, which quality is the relation in these sentences and, on the other hand, what is the part of the coordination there. Furthermore, what is this relation of coordination, which, according to some grammars, manifests through a conjunction of coordination, but which, according to some others is marked in juxtaposed sentences through different features. The study is based on a corpus of written French from literary and journalistic text sources. Syntactic, semantic and textual properties in the clauses are discussed. The analysis points to differences so, it has been noted, in each case, if one of the clauses is affirmative and the other negative and if in the second clause, the subject has not been repeated. Also, an analysis has been made on the ground of the tense, mode, phrase structure type, and thematic structure, taking into account, in each case, if the clauses are identical or different. Punctuation has been one of the properties considered. The final aim has been to eliminate gradually, based on the partition of properties, subordinate sentences, so that only the hard core of coordinate sentences remains. In this way, the coordination could be defined similarly as the phoneme is defined as a group of distinctive features. The quantitative analyses have led to the conclusion that the sentences which, from a semantic point of view, are interpreted as coordinating, contain the least of these differences, while the sentences which can be considered as subordinating present the most of these differences. The conditions of coordination are, in that sense, hierarchical, so that the syntactic constraints have to make room for semantic, textual and cognitive factors. It is interesting to notice that everyone has the ability to produce correct coordinating structures and recognize incorrect coordinating structures. This can be explained by the human ability to categorize which has been widely researched in the semantic of prototype. The study suggests that coordination and subordination could be considered as prototypical cognitive categories based on different linguistic and pragmatic features.

Herätys kylässä ja tuvissa : Rääkkylän Oravisalon kylä ja renqvistiläinen herätys 1820-luvulla

A Revival in a Village and its Households. The Village of Oravisalo in Rääkkylä Parish and the Renqvistist Revivalism in the 1820s. My purpose is to apply the science of religion and the study of past communities to the study of religious revivalism. Revivalism will be considered a religious phenomenon as well as a cultural and social phenomenon. What makes this study unique is the possibility to reconstruct a list of participating revivalists based on entries in the communion book of the time. The conflict between the revivalists and the chaplain of Rääkkylä also generated other documentary material. The community in Oravisalo was relatively stratified. People lived in complex and varying forms of households. They also had plentiful contacts both with unrelated inhabitants of Oravisalo and with the neighbouring villages. Through these contacts the inhabitants of Oravisalo were introduced to revivalism. In Oravisalo, the revival for the most part fell into a certain social stratum and did not severely damage existing relationships within families or among acquaintances. The revivalists formed a new community within the village but the community was neither very tightly-knit nor was it closed. The revival was an individual phenomenon affected by general factors. First, there were factors that brought about a quest for an applicable system of meanings. These factors included at least three important issues: the Great Partition of land, the crisis of slash-and-burn cultivation, and a population growth that increased the proportion of the landless in the village. As a result, many of the revivalists had low status and poor expectations for the future. Second, there were factors that appealed to the people in the message and character of the preacher, Henrik Renqvist. Third, the proximity of the village to Liperi, where the revival got its start, was crucial to revivalism s spread to Oravisalo. Culturally, the revival meant a change in the system of symbols or meanings, so it was not solely a matter of intensified religious fervour. For instance, Communion, prayer, reading, and perhaps baptism symbolised different things to the revivalists than to other villagers. However, the revivalists do not seem to have started any moral revolution in their village. The religious aspect defined the limits of the protest and the resistance towards authorities. The revivalists wanted only to have the right to follow their conscience. The freedom granted the female members was limited to the religious sphere. No social or economic claims were made. The revival altered the situation of its members only on a symbolic level, yet it also offered them status within their own group.

Koulukasvatusta teknologisoituvaan yhteiskuntaan : Kansakoulun opetussuunnitelman rakentuminen, 1945-1952

Education for a Technological Society. Public School Curriculum Construction, 1945-1952. The subject of my research is the significance of technology in the construction process of the public school curriculum during the years 1945-1952. During the period the war reparation and rebuilding placed demands and actions to rationalise and dramatise industry and agriculture. Thereby the ambitions of building a technological country and the reformation of curriculum took place simultaneously. Fordistian terms of reference, of which the principles were mass production, rationalisation and standardisation, a hierarchical division of labour and partition of assignments, provided a model for the developing curriculum. In the research the curriculum is examined as an artefact, which shapes socio-technically under the influence of social and technical factors. In the perspective of socio-technical construction the artefact is represented by the viewpoints of members of relevant social groups. The groups give meaning to the curriculum artefact, which determines the components of the curriculum. The weakness of the curriculum was its ineffectiveness, which was due to three critical problems. Firstly, the curriculum was to be based on scientific work, which meant the development of schools through experiments and scientific research. Secondly, the civilised conseption in the curriculum was to be composed of theoretical knowledge, as well as practical skills. Practical education was useful for both the individual and society. Thirdly, the curriculum was to be reformed in a way that the individuality of the pupil would be taken into account. It was useful for the society that talents and natural abilities of every pupil were observed and used to direct the pupil to the proper place in the social division of labour, according to the "right man in a right place" principle. The solutions to critical problems formed the instructions of the public school curriculum, which described the nature and content of education. Technology and its development were on essential part of the whole school curriculum process. The quality words connected to the development of technology - progress, rationality and effectiveness - were also suitable qualifiers and reasons for the reform of the curriculum. On the other hand, technology set a point of comparison and demand for the development of all phases of education. The view of technology was not clearly deterministic - it was also possible to shape technological society with the help of education. The public school curriculum process indicates how originally the principles of technological systems were shaped to the language of education and accepted in educational content.

Problems and Algorithms for Sequence Segmentations

The analysis of sequential data is required in many diverse areas such as telecommunications, stock market analysis, and bioinformatics. A basic problem related to the analysis of sequential data is the sequence segmentation problem. A sequence segmentation is a partition of the sequence into a number of non-overlapping segments that cover all data points, such that each segment is as homogeneous as possible. This problem can be solved optimally using a standard dynamic programming algorithm. In the first part of the thesis, we present a new approximation algorithm for the sequence segmentation problem. This algorithm has smaller running time than the optimal dynamic programming algorithm, while it has bounded approximation ratio. The basic idea is to divide the input sequence into subsequences, solve the problem optimally in each subsequence, and then appropriately combine the solutions to the subproblems into one final solution. In the second part of the thesis, we study alternative segmentation models that are devised to better fit the data. More specifically, we focus on clustered segmentations and segmentations with rearrangements. While in the standard segmentation of a multidimensional sequence all dimensions share the same segment boundaries, in a clustered segmentation the multidimensional sequence is segmented in such a way that dimensions are allowed to form clusters. Each cluster of dimensions is then segmented separately. We formally define the problem of clustered segmentations and we experimentally show that segmenting sequences using this segmentation model, leads to solutions with smaller error for the same model cost. Segmentation with rearrangements is a novel variation to the segmentation problem: in addition to partitioning the sequence we also seek to apply a limited amount of reordering, so that the overall representation error is minimized. We formulate the problem of segmentation with rearrangements and we show that it is an NP-hard problem to solve or even to approximate. We devise effective algorithms for the proposed problem, combining ideas from dynamic programming and outlier detection algorithms in sequences. In the final part of the thesis, we discuss the problem of aggregating results of segmentation algorithms on the same set of data points. In this case, we are interested in producing a partitioning of the data that agrees as much as possible with the input partitions. We show that this problem can be solved optimally in polynomial time using dynamic programming. Furthermore, we show that not all data points are candidates for segment boundaries in the optimal solution.

Automating Crop Damage Assessments with Unmanned Aerial Systems and Machine Learning

Agricultural pests are responsible for millions of dollars in crop losses and management costs every year. In order to implement optimal site-specific treatments and reduce control costs, new methods to accurately monitor and assess pest damage need to be investigated. In this paper we explore the combination of unmanned aerial vehicles (UAV), remote sensing and machine learning techniques as a promising methodology to address this challenge. The deployment of UAVs as a sensor platform is a rapidly growing field of study for biosecurity and precision agriculture applications. In this experiment, a data collection campaign is performed over a sorghum crop severely damaged by white grubs (Coleoptera: Scarabaeidae). The larvae of these scarab beetles feed on the roots of plants, which in turn impairs root exploration of the soil profile. In the field, crop health status could be classified according to three levels: bare soil where plants were decimated, transition zones of reduced plant density and healthy canopy areas. In this study, we describe the UAV platform deployed to collect high-resolution RGB imagery as well as the image processing pipeline implemented to create an orthoimage. An unsupervised machine learning approach is formulated in order to create a meaningful partition of the image into each of the crop levels. The aim of this approach is to simplify the image analysis step by minimizing user input requirements and avoiding the manual data labelling necessary in supervised learning approaches. The implemented algorithm is based on the K-means clustering algorithm. In order to control high-frequency components present in the feature space, a neighbourhood-oriented parameter is introduced by applying Gaussian convolution kernels prior to K-means clustering. The results show the algorithm delivers consistent decision boundaries that classify the field into three clusters, one for each crop health level as shown in Figure 1. The methodology presented in this paper represents a venue for further esearch towards automated crop damage assessments and biosecurity surveillance.