925 resultados para Fix and optimize
Resumo:
Introduction: Ski mountaineering is an increasingly popular winter sport and leisure activity. Elite athletes practice this sport with a high level of professionalism, but so far little scientific evidence was available to support their approach. The main aim of this work was to develop a specific knowledge about ski mountaineering, allowing providing specific recommendations for the practice. Methods: First we investigated energy cost (EC) and vertical energy cost (ECv). These two parameters were estimated with oxygen uptake, at different gradients (7 to 33%) and different speeds (2 to 7 km·∙h-‐1) on treadmill with roller skis and on snow with ski mountaineering gear. Then we assessed energy expenditure (EE) during a long duration ski mountaineering event by measuring heart rate and altitude all along the race and associating them with an EE. The EE was compared with the energy intake during the race. Hydration level was estimated by comparing body weight immediately before and after the race. The energy intake during the 4 days preceding the race was estimated with food diaries and compared with the guidelines. Results/discussion: EC and ECv of ski mountaineering were very high and varied with gradient and speed. ECv decreased between 7 and 33% and with increasing speed at steep gradients. For a 5 h 51 ± 53 min race, the mean EE was 22.6 ± 2.6 MJ. The energy intake covered 20 ± 7% of the EE and was about 14% lower than the recommendations. No significant dehydration was observed. For the longest (53 km) race, we can extrapolate the EE as about 40 MJ. Before the race the energy intake and especially the carbohydrate intake were far under the guidelines (83 ± 17% and 46 ± 13% of the recommendations). Conclusions: EC and EE of ski mountaineering are very high. To minimize the EE to reach the top of a mountain and optimize the performance, the skier should choose a steep gradient and combine this steep gradient with a fast speed. The CHO intake should be increased during but, also before the race while the fluid intake seemed to be adequate. -- Introduction : Le ski-‐alpinisme est un sport d'hiver qui s'est particulièrement développé durant les dernières décennies : de plus en plus de personnes pratiquent cette activité dans un cadre de loisirs et de plus en plus d'athlètes d'élite prennent part à des compétitions qu'ils préparent avec un haut degré de professionnalisme. Cependant, les connaissances scientifiques restent limitées et les athlètes ne disposent pas de recommandations précises et spécifiques. Le but principal de ce travail est donc de développer un savoir spécifique sur le ski-‐alpinisme, ce qui devrait permettre d'établir des recommandations pour la pratique. Méthode : Le coût énergétique (CE) et le coût énergétique vertical (CEv) du ski-‐alpinisme ont été calculés en mesurant la consommation d'oxygène à différentes pentes (7 à 33%) et vitesses (2 à 6.8 km·∙h-‐1) sur tapis roulant avec des skis à roulettes et sur le terrain avec des skis de randonnée. Ensuite, la dépense énergétique (DE) d'une course de ski-‐alpinisme de longue durée a été évaluée en mesurant la fréquence cardiaque et l'altitude en continu. La DE a été comparée à l'énergie consommée par les ravitaillements. Des carnets alimentaires ont permis d'estimer la consommation d'énergie (boissons et nourriture) pendant les 4 jours précédant la course. Résultats/discussion : Le CE du ski-‐alpinisme est très élevé. Le CEv diminue entre 2 et 6 km·∙h-‐1 et entre 7 et 33%. Pour une course de 5 h 51 ± 53 min (26 km), la DE était de 22.6 ± 2.6 MJ, alors que, pour le grand parcours de la Patrouille des Glaciers (53 km), elle serait d'environ 40 MJ. La consommation d'énergie, pendant le parcours de 26 km, couvrait 20 ± 7% de la DE et était inférieure de 14% aux recommandations, alors qu'aucune déshydratation significative n'était constatée. Les jours précédant la course, la consommation d'énergie et surtout d'hydrates de carbone était bien inférieure aux quantités recommandées (83 ± 17% et 46 ± 13% des recommandations). Conclusion : Le CE et la DE étaient très élevés. Pour minimiser la dépense lors d'une ascension, il faut combiner pente et vitesse élevées. La consommation d'hydrates de carbone devrait être massivement augmentée avant et pendant la course, alors que l'hydratation semble adéquate.
Resumo:
Introducció Aquest treball, aborda l'atenció domiciliaria a les persones amb dependència des de la perspectiva de la teràpia ocupacional a la comarca d’Osona. Conèixer aquesta tipologia de persones i la seva problemàtica, ha de servir per adaptar les infraestructures d’aquests serveis a fi de donar millor resposta a les seves necessitats. Objectiu Descriure la tipologia d'usuaris que es deriven al servei de Teràpia Ocupacional Domiciliària a la comarca d'Osona Metodologia S'ha realitzat un estudi descriptiu preliminar d'una mostra (n=65) de usuaris de la base de dades del Banc D'ajudes Tècniques (BAT Osona) del Consell Comarcal d'Osona. En aquest estudi s'han analitzat les variables de sexe, edat, nivell funcional, diagnòstic, situació familiar, agents derivadors, motius de derivació i problemàtica principal detectada. Resultats S'indica un perfil femení de la mostra (72,09%), amb una mitjana d'edat de 74,41 anys. A nivell funcional, la mitjana de puntuació ha estat de 65 punts en l'Ìndex de Barthel, en persones amb patologia osteoarticular en el 18,60% dels casos. La situació familiar situa un perfil compartit de persones que viuen en família (41,86%) o soles (39,53%). En les derivacions al servei, el 58,13% dels casos es fa des dels Ajuntaments i per dificultats en el quarto de bany (46,51%). La problemàtica més detectada en aquests domicilis és la dificultat per l'accés a la banyera (67,40%). Conclusió Aquests resultats ens indiquen una clara tipologia de persones que s’han d’atendre i unes problemàtiques en la seva vivenda que provoquen serioses dificultats de desenvolupament funciona. Es precís, en futures investigacions acotar encara més aquets perfils i problemàtiques a fi de precisar les estratègies d’intervenció i optimitzar millor aquest tipus de recursos.
Resumo:
The enzymatic modification of proteins has been widely studied with the aim of add value to low commercial value fish. The objective of this work was to evaluate and optimize the parameters involved in the production process of an enzymatic protein hydrolyzed with high protein content. The results showed that for Alcalase the most significant parameters were temperature, pH and substrate concentration and for Flavourzyme were pH, substrate concentration and enzyme concentration. It was obtained for Alcalase a predictive model for the recovered nitrogen and for Flavourzyme a predictive model for the hydrolysis degree.
Resumo:
The aim of the present work was to develop and optimize a method for determination of bioavailable phosphorus in samples of feces and fish feed using ultrasound extraction and subsequent quantification by visible spectrophotometry. Using as extractor solution HNO3 0.50 mol L-1, the great conditions of extraction established were: sample mass - 100 mg, samples granulometry - < 60 µm, sonification time - five cycles of 40 s and ultrasound potency - 136 W. The proposed method was applied in studies of digestibility of this nutrient in different feeds used in diets of juvenile of Nile tilapia.
Resumo:
The objective of this master’s thesis was to find means and measures by which an industrial manufacturing company could find cost-competitive solutions in a price-driven market situation. Initially, it was essential to find individual high customer value spots from the offering. The study addressed this in an innovative way by providing the desired information for the entire range of offering. The research was carried out using the constructivist approach method. Firstly, the project and solution marketing literature was reviewed in order to establish an overview of the processes and strategies involved. This information was then used in conjunction with the company’s specific offering data to conduct a construction. This construction can be used in various functions within the target company to streamline and optimize the specifications into so-called “preferred offers”. The study also presents channels and methods with which to exploit the construction in practice in the target company. The study aimed to bring concrete improvements in competitiveness and profitability. One result of this study was the creation of a training material for internal use. This material is now used in several countries to inform and present to the staff the cost-competitive aspects of the target company’s offering.
Resumo:
Työn tavoitteena oli tutkia innovaatioita ja organisaation innovaatiokyvykkyyttä, innovaatiokyvykkyyden taustatekijöitä sekä innovaatioprosessin alkupään (Fuzzy Front End, FFE) sekä siinä tapahtuvan päätöksenteon johtamista. Lisäksi tavoitteena oli suunnitella innovaatioprosessin alkupään toimintamalli selkeyttämään toimintaa prosessin alkupäässä sekä antaa toimenpide-ehdotuksia ja suosituksia. Tutkimuksen teoriaosuus tehtiin kirjallisuustutkimuksena. Tutkimuksen empiirinen osuus suoritettiin case -analyysinä yrityksen henkilöhaastattelu- ja toimintatutkimuksen muodossa. Innovaatioprosessin alkupäähän on tunnistettu toimintamalleja, joilla selkeytetään ja tehostetaan prosessin alkupään vaiheita. Vaiheet ovat mahdollisuuksien tunnistaminen, mahdollisuuksien analysointi, ideointi, ideoiden valitseminen ja konsepti- ja teknologiakehitys. Innovaatioprosessin rinnalla kulkee päätöksenteon prosessi, jonka suhteen tunnistetaan selkeät päätöksentekokohdat ja kriteerit prosessissa etenemiselle. Innovaatio- ja päätöksentekoprosessiin osallistuu eri vaiheissa sekä yrityksen sisäiset, kuten henkilöstö, että ulkoiset, kuten asiakkaat, toimittajat ja verkostokumppanit, sidosryhmät. Lisäksi innovaatioprosessin toimintaan vaikuttavat johdon tuki ja sitoutuminen, osallistujien kyky luovuuteen sekä muut innovaatiokyvykkyyden taustatekijät. Kaikki nämä tekijät tulee huomioida innovaatioprosessin alkupään mallia suunniteltaessa. Tutkimus tehtiin tietoliikennealan yrityksen tarpeisiin. Yrityksessä on käytössä aloitetoimintaa, mutta sen ei koeta tarjoavan riittävästi ideoita yrityksen tuotekehityksen tarpeisiin. Yrityksen henkilöstön innovaatiopotentiaali on suuri, mikä halutaan hyödyntää paremmin suunnittelemalla yrityksen käyttöön soveltuva, innovaatioprosessin alkupään toimintaan ohjaava, vakioitu ja henkilöstöä ja muita yhteistyötahoja, kuten asiakkaita, osallistava toimintamalli. Toimenpide-ehdotuksina ja suosituksina esitetään innovaatioprosessin alkupään johtamisen toimintamallia. Esitetyssä mallissa määritellään vaiheet, menetelmät, päätöksenteko ja vastuut. Toimintamalli esitetään soveltuen yhdistettäväksi yrityksessä käytössä olevaan innovaatioprosessin loppupään, tuotekehitysprojektien läpiviemisen, malliin.
Resumo:
Käytetyn voiteluöljyn regeneroinnissa muodostuu prosessivettä useista lähteistä. Tehokas päästöjenhallinta on yksi tärkeimmistä tavoitteista regenerointilaitoksen operoinnissa ja sen takia sitä tulee kehittää jatkuvasti entistä paremmaksi. Tavoitteisiin pääsemiseksi on oleellista tunnistaa vesienkäsittelyprosessin laadullinen massatase ja laadunvaihtelut ajotilanteiden mukaan. Työssä tutkitaan ja analysoidaan veden sisältämiä epäpuhtauksia sekä kirjallisuuslähteiden perusteella, että standardimenetelmillä ja modifioiduilla menetelmillä, joilla on akkreditointi. Analyysituloksista muodostetaan laadullinen massatase, josta nähdään epäpuhtauksien ja niitä kuvaavien parametrien kuormitukset kussakin prosessivesivirrassa. Tulosten perusteella arvioidaan nykyisen vesienkäsittelyn tehokkuutta, sen säätömahdollisuuksia ja kehitystarvetta. Tarkastelun ulkopuolelle kuitenkin jätetään vesienkäsittelystä ulosjohdettavan prosessiveden puhdistuslaitos. Tutkimusten perusteella regenerointilaitoksessa muodostuvien prosessivesien epäpuhtaudet koostuvat öljystä, BTEX-yhdisteistä, fenoliyhdisteistä, liuottimista, polttoaineiden ja voiteluöljyjen lisäaineista, typpi- ja rikkiyhdisteistä, metalliyhdisteistä sekä kiintoaineesta. Öljy jakautuu kevyisiin (C5-C10), keskiraskaisiin (C10-21) ja raskaisiin (C21-40) jakeisiin. Vesienkäsittelyssä suurin osa öljystä ja epäpuhtauksista saadaan erottumaan vedestä, jolloin puhdistuslaitokselle päätyy jäämäpitoisuudet öljyä, haihtuvia yhdisteitä sekä muita epäpuhtauksia. Puhdistuslaitosta kuormittavat eniten liuenneet orgaaniset yhdisteet sekä korkeaa kemiallista hapenkulutusta aiheuttavat epäorgaaniset yhdisteet (suolat), joiden erottamista prosessivesistä on syytä tulevaisuudessa kehittää.
Resumo:
One of the main developments in the global economy during the past decades has been the growth of emerging economies. Projections for their long-term growth, changes in the investment climate, corporate transparency and demography point to an increasing role for these emerging economies in the global economy. Today, emerging economies are usually considered as financial markets offering opportunities for high returns, good risk diversification and improved return-to-risk ratios. However, researchers have noted that these advantages may be in decline because of the increasing market integration. Nevertheless, it is likely that certain financial markets and specific sectors will remain partially segmented and somewhat insulated from the global economy for the year to come. This doctoral dissertation investigates several stock markets in Emerging Eastern Europe (EEE), including the ones in Russia, Poland, Hungary, the Czech Republic, Bulgaria and Slovenia. The objective is to analyze the returns and financial risks in these emerging markets from international investor’s point of view. This study also examines the segmentation/integration of these financial markets and the possibilities to diversify and hedge financial risk. The dissertation is divided into two parts. The first includes a review of the theoretical background for the articles and a review of the literature on EEE stock markets. It includes an overview of the methodology and research design applied in the analysis and a summary of articles from the second part of this dissertation and their main findings. The second part consists of four research publications. This work contributes to studies on emerging stock markets in four ways. First, it adds to the body of research on the pricing of risk, providing new empirical evidence about partial stock market segmentation in EEE. The results suggest that the aggregate emerging market risk is a relevant driver for stock market returns and that this market risk can be used to price financial instruments and forecast their performance. Second, it contributes to the empirical research on the integration of stock markets, asset prices and exchange rates by identifying the relationships between these markets through volatility and asset pricing. The results show that certain sectors of stock markets in EEE are not as integrated as others. For example, the Polish consumer goods sector, the Hungarian telecommunications sector, and the Czech financial sector are somewhat isolated from their counterparts elsewhere in Europe. Nevertheless, an analysis of the impact of EU accession in 2004 on stock markets suggests that most of the EEE markets are becoming increasingly integrated with the global markets. Third, this thesis complements the scientific literature in the field of shock and volatility spillovers by examining the mechanism of spillover distribution among the EU and EEE countries. The results illustrate that spillovers in emerging markets are mostly from a foreign exchange to the stock markets. Moreover, the results show that the effects of external shocks on stock markets have increased after the enlargement of the EU in 2004. Finally, this study is unique because it analyzes the effects of foreign macroeconomic news on geographically closely related countries. The results suggest that the effects of macroeconomic announcements on volatility are significant and have effect that varies across markets and their sectors. Moreover, the results show that the foreign macroeconomic news releases, somewhat surprisingly, have a greater effect on the EEE markets than the local macroeconomic news. This dissertation has a number of implications for the industry and for practitioners. It analyses financial risk associated with investing in Emerging Eastern Europe. Investors may use this information to construct and optimize investment portfolios. Moreover, this dissertation provides insights for investors and portfolio managers considering asset allocation to protect value or obtain higher returns. The results have also implications for asset pricing and portfolio selection in light of macroeconomic news releases.
Resumo:
Cardiac troponin (cTn) I and T are the recommended biomarkers for the diagnosis and risk stratification of patients with suspected acute coronary syndrome (ACS), a major cause of cardiovascular death and disability worldwide. It has recently been demonstrated that cTn-specific autoantibodies (cTnAAb) can negatively interfere with cTnI detection by immunoassays to the extent that cTnAAb-positive patients may be falsely designated as cTnI-negative. The aim of this thesis was to develop and optimize immunoassays for the detection of both cTnI and cTnAAb, which would eventually enable exploring the clinical impact of these autoantibodies on cTnI testing and subsequent patient management. The extent of cTnAAb interference in different cTnI assay configurations and the molecular characteristics of cTnAAbs were investigated in publications I and II, respectively. The findings showed that cTnI midfragment targeting immunoassays used predominantly in clinical practice are affected by cTnAAb interference which can be circumvented by using a novel 3+1-type assay design with three capture antibodies against the N-terminus, midfragment and C-terminus and one tracer antibody against the C-terminus. The use of this assay configuration was further supported by the epitope specificity study, which showed that although the midfragment is most commonly targeted by cTnAAbs, the interference basically encompasses the whole molecule, and there may be remarkable individual variation at the affected sites. In publications III and IV, all the data obtained in previous studies were utilized to develop an improved version of an existing cTnAAb assay and a sensitive cTnI assay free of this specific analytical interference. The results of the thesis showed that approximately one in 10 patients with suspected ACS have detectable amounts of cTnAAbs in their circulation and that cTnAAbs can inhibit cTnI determination when targeted against the binding sites of assay antibodies used in its immunological detection. In the light of these observations, the risk of clinical misclassification caused by the presence of cTnAAbs remains a valid and reasonable concern. Because the titers, affinities and epitope specificities of cTnAAbs and the concentration of endogenous cTnI determine the final effect of circulating cTnAAbs, appropriately sized studies on their clinical significance are warranted. The new cTnI and cTnAAb assays could serve as analytical tools for establishing the impact of cTnAAbs on cTnI testing and also for unraveling the etiology of cTn-related autoimmune responses.
Resumo:
Notch signaling is an evolutionarily ancient, highly conserved pathway important for deciding cell fate, cellular development, differentiation, proliferation, apoptosis, adhesion, and epithelial-to-mesenchymal transition. Notch signaling is also critical in mammalian cardiogenesis, as mutations in this signaling pathway are linked to human congenital heart disease. Furthermore, Notch signaling can repair myocardial injury by promoting myocardial regeneration, protecting ischemic myocardium, inducing angiogenesis, and negatively regulating cardiac fibroblast-myofibroblast transformation. This review provides an update on the known roles of Notch signaling in the mammalian heart. The goal is to assist in developing strategies to influence Notch signaling and optimize myocardial injury repair.
Resumo:
The goal of this study was to determine the chemical composition of cashew apples agro-industrial residue and optimize the process of polyphenols extraction in this residue. The extraction process conditions were defined using a 24-1 fractional factorial experimental design using acetone and methanol as solvents. The independent variables were: time (30 to 90 min), temperature (30 to 50 °C), solvent concentrations (50% to 90%), agitation speed (100 to 300 rpm); the dependent variables were: total phenolic content and DPPH scavenging capacity. The optimized process was carried out by applying the Central Composite Rotational Design (CCRD) considering the results obtained with the 24-1 fractional factorial experimental design. The residue presented bioactive compounds in its composition, with emphasis on the content of total phenolic compounds (1975.64 mg/ 100 g). The extraction process was not affected by methanol; however, acetone affected the amounts of extracted phytochemicals. Extracts with high levels of polyphenols and strong DPPH scavenging capacity (> 80%) were obtained using 55% acetone, 30 minutes, 30 °C, and 150 rpm. The results showed that cashew apple residue is a potential natural source of bioactive compounds with strong antioxidant capacity. These compounds could be used partially or totally to replace synthetic antioxidants.
Resumo:
In the industry of the case company, transportation and warehousing costs account for more than 10% of the total cost which is more than on average. A Finnish company has an understanding that by sending larger shipments in parcels, they could save tens of thousands of euros annually in freight costs in Finland’s domestic shipments. To achieve these savings and optimize total logistics cost, company’s interest is to find out which is the cost efficient way of shipping road shipments of certain volumes; in parcel boxes or on pallets, and what should be the split volume determining the shipment type. Distribution center (DC) costs affect this decision and therefore they need to be also evaluated to determine the total logistics cost savings. Main results were achieved by executing activity-based costing-calculations including DC and road freight costs to determine the ideal split volume with which the total logistics cost is optimal. Calculations were done for Finland’s DC, separately for two main road freight destinations, Finland and Sweden, which cover 50% of road shipment spend. Data for calculations was collected both manually and automatically from various internal and external sources, such as the company ERP system and logistics service providers’ (LSP) reporting. DC processes were studied in practice and compared to model processes. Currently used freight rates were compared to existing pricing models and freight service tendering process was evaluated by participating in the process and comparing it to the models based on literature. The results show that the potential savings are not as significant as the company hoped for, mainly because of packing work increasing DC labor cost. Annual savings by setting ideal split volume per country would account for 0,4 % of the warehousing and transportation costs of shipments in scope of this thesis. Split volume should be set separately for each route, mainly because the pricing model for road freight is different in each country. For some routes bigger parcels should be sent but for some routes pallets should be used more. Next step is to do these calculations for remaining routes to determine total savings potential. Other findings show that the processes in the DC are designed well and the company could achieve savings by executing tenders more efficiently. Company should also pay more attention to parcel pricing and packing the shipments accordingly.
Resumo:
A method is presented for determining the composition of thin films containing the elements Bi, Sr, Br, Cu, and Ca. Quantitative x-ray fluorescence (XRF) consisting of radioactive sources (secondary foil excitor 241Am-Mo source and 55Pe source), a Si(Li) detector, and a multichannel analyzer were employed. The XRF system was calibrated by using sol gel thin films of known element composition and also by sputtered thin films analyzed by the conventional Rutherford Back Scattering (RBS). The XRF system has been used to assist and optimize the sputter target composition required to produce high-Tc BiSrCaCuO films with the desired metal composition.
Resumo:
Des études adultes sur l’œdème pulmonaire lésionnel et le Syndrome de Détresse Respiratoire Aiguë ont mené à l’établissement de recommandations sur les stratégies de ventilation mécanique à employer chez ces patients. Cependant, il n’est pas clair si les recommandations adultes sont également bénéfiques pour l’enfant. Objectif Décrire les stratégies de ventilation mécanique employées chez les enfants atteints d’un œdème pulmonaire lésionnel. Méthodes Étude épidémiologique transversale tenue dans 59 unités de Soins Intensifs Pédiatriques de 12 pays en Amérique du Nord et en Europe. Six jours d’étude ont eu lieu entre juin et novembre 2007. Les enfants atteints d’un œdème pulmonaire lésionnel étaient inclus et des données sur la sévérité de leur maladie, les paramètres de ventilation mécanique et les thérapies adjuvantes employées ont été recueillies. Résultats Des 3823 enfants dépistés, 414 (10.8%) avaient un œdème pulmonaire lésionnel et 165 (40%) ont été inclus dans l’étude (124 étaient sous ventilation mécanique conventionnelle, 27 sous ventilation à haute fréquence par oscillation et 14 sous ventilation non invasive). Dans le groupe sous ventilation conventionnelle, 43.5% étaient ventilés avec un mode contrôlé à pression, le volume courant moyen était de 8.3±3.3 ml/kg et l’utilisation de la PEP et FiO2 était hétérogène. Conclusions Cette étude démontre une hétérogénéité dans les stratégies de ventilation mécanique employées chez les enfants souffrant d’un œdème pulmonaire lésionnel. Celle-ci pourrait être en partie reliée à la robustesse des critères diagnostiques actuellement utilisés pour définir l’ALI/SDRA. Une évaluation rigoureuse de ces stratégies est nécessaire pour guider la standardisation des soins et optimiser l’issue de ces patients.
Resumo:
Le projet de recherche porte sur l'étude des problèmes de conception et de planification d'un réseau optique de longue distance, aussi appelé réseau de coeur (OWAN-Optical Wide Area Network en anglais). Il s'agit d'un réseau qui transporte des flots agrégés en mode commutation de circuits. Un réseau OWAN relie différents sites à l'aide de fibres optiques connectées par des commutateurs/routeurs optiques et/ou électriques. Un réseau OWAN est maillé à l'échelle d'un pays ou d’un continent et permet le transit des données à très haut débit. Dans une première partie du projet de thèse, nous nous intéressons au problème de conception de réseaux optiques agiles. Le problème d'agilité est motivé par la croissance de la demande en bande passante et par la nature dynamique du trafic. Les équipements déployés par les opérateurs de réseaux doivent disposer d'outils de configuration plus performants et plus flexibles pour gérer au mieux la complexité des connexions entre les clients et tenir compte de la nature évolutive du trafic. Souvent, le problème de conception d'un réseau consiste à prévoir la bande passante nécessaire pour écouler un trafic donné. Ici, nous cherchons en plus à choisir la meilleure configuration nodale ayant un niveau d'agilité capable de garantir une affectation optimale des ressources du réseau. Nous étudierons également deux autres types de problèmes auxquels un opérateur de réseau est confronté. Le premier problème est l'affectation de ressources du réseau. Une fois que l'architecture du réseau en termes d'équipements est choisie, la question qui reste est de savoir : comment dimensionner et optimiser cette architecture pour qu'elle rencontre le meilleur niveau possible d'agilité pour satisfaire toute la demande. La définition de la topologie de routage est un problème d'optimisation complexe. Elle consiste à définir un ensemble de chemins optiques logiques, choisir les routes physiques suivies par ces derniers, ainsi que les longueurs d'onde qu'ils utilisent, de manière à optimiser la qualité de la solution obtenue par rapport à un ensemble de métriques pour mesurer la performance du réseau. De plus, nous devons définir la meilleure stratégie de dimensionnement du réseau de façon à ce qu'elle soit adaptée à la nature dynamique du trafic. Le second problème est celui d'optimiser les coûts d'investissement en capital(CAPEX) et d'opération (OPEX) de l'architecture de transport proposée. Dans le cas du type d'architecture de dimensionnement considérée dans cette thèse, le CAPEX inclut les coûts de routage, d'installation et de mise en service de tous les équipements de type réseau installés aux extrémités des connexions et dans les noeuds intermédiaires. Les coûts d'opération OPEX correspondent à tous les frais liés à l'exploitation du réseau de transport. Étant donné la nature symétrique et le nombre exponentiel de variables dans la plupart des formulations mathématiques développées pour ces types de problèmes, nous avons particulièrement exploré des approches de résolution de type génération de colonnes et algorithme glouton qui s'adaptent bien à la résolution des grands problèmes d'optimisation. Une étude comparative de plusieurs stratégies d'allocation de ressources et d'algorithmes de résolution, sur différents jeux de données et de réseaux de transport de type OWAN démontre que le meilleur coût réseau est obtenu dans deux cas : une stratégie de dimensionnement anticipative combinée avec une méthode de résolution de type génération de colonnes dans les cas où nous autorisons/interdisons le dérangement des connexions déjà établies. Aussi, une bonne répartition de l'utilisation des ressources du réseau est observée avec les scénarios utilisant une stratégie de dimensionnement myope combinée à une approche d'allocation de ressources avec une résolution utilisant les techniques de génération de colonnes. Les résultats obtenus à l'issue de ces travaux ont également démontré que des gains considérables sont possibles pour les coûts d'investissement en capital et d'opération. En effet, une répartition intelligente et hétérogène de ressources d’un réseau sur l'ensemble des noeuds permet de réaliser une réduction substantielle des coûts du réseau par rapport à une solution d'allocation de ressources classique qui adopte une architecture homogène utilisant la même configuration nodale dans tous les noeuds. En effet, nous avons démontré qu'il est possible de réduire le nombre de commutateurs photoniques tout en satisfaisant la demande de trafic et en gardant le coût global d'allocation de ressources de réseau inchangé par rapport à l'architecture classique. Cela implique une réduction substantielle des coûts CAPEX et OPEX. Dans nos expériences de calcul, les résultats démontrent que la réduction de coûts peut atteindre jusqu'à 65% dans certaines jeux de données et de réseau.