Dietary Quality and Associated Factors among Factory Workers in the Metropolitan Region of Sao Paulo, Brazil

The workplace is a manageable community-based setting for ensuring proper nutrition. This study aimed to evaluate dietary quality and associated factors among adult workers at a cosmetics factory in the metropolitan area of Sao Paulo, Brazil. This factory was actively participating in the Brazilian Workers` Meal Program, which was created to ensure workers` nutritional health. In this cross-sectional study, data on 202 adult workers were assessed using questionnaires (sociodemographic, anthropometric, and lifestyle characteristics) administered during August and September 2006. Dietary intake, measured by 24-hour dietary recall, was used to calculate the modified Healthy Eating Index (HEI). A repeated administration of the 24-hour dietary recall was applied in a random subsample to calculate the modified HEI adjusted for the within-person variation in intake. Mean adjusted modified HEI scores were analyzed using multiple linear regression adjusted for energy. The mean adjusted modified HEI score was 72.3 +/- 8.0. The lowest adjusted modified HEI components scores were ""milk and dairy products"" (4.4 +/- 3.2) and ""sodium"" (3.7 +/- 3.1). Two percent of workers had ""poor diet"" (adjusted modified HEI score <51 points) and the majority (87%) had ""diet that needs modification"" (adjusted modified HEI score between 51 and 80), despite their participation in the meal program. Adjusted modified HEI scores were considerably higher for men (74.7 +/- 7.0) than for women (66.9 +/- 8.2) and for normal body mass index (calculated as kg/m(2)) (73.3 +/- 7.8) than for overweight/obese (70.9 +/- 8.1). Based on these results, the vast majority of workers were found to have diets that needed improvement. Individuals with higher-quality diets were more likely to have lower body mass index and to be male. J Am Diet Assoc. 2010;110:786-790.

XHA: eXtensible Hyper-Automation

O objetivo geral desta dissertação é estudar as possibilidades de flexibilização da função de saída do Sistema Hyper-Automaton além das rígidas possibilidades utilizadas atualmente com a utilização direta do HTML, objetivando eliminar as limitações como execução de aplicações proprietárias, caracteres incompatíveis entre browsers, excesso de tráfego na rede, padronizar aplicações, incrementar recursos didáticos, melhorar o suporte a aplicações multimídia atuais e futuras, facilitar a manutenção, implementação e reuso, alterar o layout de saída no browser de maneira dinâmica, explorar outros recursos de links, estabelecer padrões de organização do material instrucional criado pelo professor e muitas outras. Tal sistema anteriormente desenvolvido e funcionando adequadamente, é baseado no formalismo de Autômatos Finitos com Saída como modelo estrutural para organização de hiperdocumentos instrucionais, em especial em cursos na Web, tornando o material hipermídia independente do controle da aplicação. O Sistema Hyper-Automaton, tornou-se portanto, um sistema semi-automatizado para suporte a cursos na Web. Com o desdobramento da pesquisa, esta procurou ir mais além e descreveu possibilidades de não só estudar os aspectos possíveis de formatação de saída do sistema, mas reestruturá-lo totalmente sobre uma linguagem de markup padrão, buscando atualizá-lo tecnologicamente definindo outras possibilidades para que significativos trabalhos futuros possam de maneira mais clara serem alcançados. Dessa maneira, esta dissertação centra-se no estudo da aplicação de formas de flexibilização do Sistema Hyper-Automaton, tanto na parte da estruturação de documentos que são conteúdos instrucionais armazenados, bem como, na forma desse material tornar-se-á disponível através de navegadores WWW compatíveis com as tecnologias propostas, possibilitando o incremento substancial de funcionalidades necessárias para cursos onde a Web é o principal meio. Esta pesquisa dá prosseguimento a dois trabalhos anteriormente concluídos no PPGC e do Curso de Bacharelado em Ciência da Computação da UFRGS no ano de 2000, na seqüência, Hyper-Automaton: Hipertextos e Cursos na Web Utilizando Autômatos Finitos com Saída, dissertação de mestrado de Júlio Henrique de A. P. Machado e Hyper-Automaton: Implementação e Uso, trabalho de diplomação de Leonardo Penczek.

Fábrica de software: até que ponto fordista?

Due to the crisis over rigid automation that occurred around 1960, management models essentially fordist, have gradually become more flexible. The software factories, however, that emerged in the nineties manufacturing the most advanced technological products, adopted eminently fordist controls and seem to be going contrary to the evolutionary cycle that organizations tend to follow. The alternation between rigid and flexible management models of these software factories, observed under continuum fordism (0) ______ (1) post-fordism, as well as the limitations of the metaphor that emerges given the nature of the software they manufacture, constitutes the object of the study.

Desenvolvimento de um middleware para comunicação via web services e sua aplicação em sistemas de aquisição de dados industriais

The control of industrial processes has become increasingly complex due to variety of factory devices, quality requirement and market competition. Such complexity requires a large amount of data to be treated by the three levels of process control: field devices, control systems and management softwares. To use data effectively in each one of these levels is extremely important to industry. Many of today s industrial computer systems consist of distributed software systems written in a wide variety of programming languages and developed for specific platforms, so, even more companies apply a significant investment to maintain or even re-write their systems for different platforms. Furthermore, it is rare that a software system works in complete isolation. In industrial automation is common that, software had to interact with other systems on different machines and even written in different languages. Thus, interoperability is not just a long-term challenge, but also a current context requirement of industrial software production. This work aims to propose a middleware solution for communication over web service and presents an user case applying the solution developed to an integrated system for industrial data capture , allowing such data to be available simplified and platformindependent across the network

Monitoring of the dissemination of Salmonella in the chicken Frankfurt-sausage production line of a sausage factory in the state of São Paulo, Brazil

Poultry meat and its derivatives are among the foodstuffs considered by environmental health authorities to present the highest risks to the public. A total of 185 samples were collected in five monthly batches, from different processing stages in a sausage plant that uses mechanically-deboned chicken meat (MDCM) and tested for the presence of Salmonella. Enrichment was carried out in both Kauffman tetrathionate broth and Rappaport-Vassiliadis broth and isolation on Salmonella-Shigella agar and brilliant-green agar. Live Salmonella bacteria were isolated from six samples of the raw meat and from the emulsion, in batches three, four and five, but not from any sample in batches one or two. The six isolated strains were all classified as Salmonella Albany, which has not previously been reported in MDCM. of the two enrichment broths, Rappaport-Vassiliadis gave the better results. The Pattern of contamination suggests a probable common source, given that a new supplier was used in the third, fourth, and fifth months. It was also shown that the industrial cooking was effective in preventing Salmonella surviving in the final product.

Analysis of the performance of an extraction-condensation steam turbine on a cogeneration system of a Brazilian sugar-alcohol factory

In this work a detailed thermodynamic analysis for an extraction-condensation steam turbine capable to drive a 40 MVA electricity generator in a sugar-alcohol factory was carried out. The use of this turbine in the cogeneration system showed that its efficiency contributed to increase the power generation, although the condensation reduces the overall efficiency of the plant. Sensibility analyses were performed to evaluate the behavior of the overall energy efficiency of a plant with the extraction-condensation turbine in function of the boiler efficiency, the specific consumption of steam in the processes and the condensation rate in the turbine. It was observed that the plant efficiency is very sensible to the condensation rate variation and it increases when there is an increase in the demand of steam for processes.

New technologies, old habits: automation without innovation

This research investigated the underuse of technological tools by innovative organizations which are acknowledged for their use of and familiarity with new technologies. The research conducted an analysis of 58 institutional repositories (IRs) out of 43 educational and research institutions which are internationally renowned for excellence. The core aspect of the analysis was the use of IRs for publishing and dealing with evidence in order to legitimize and add value to scientific research. The following items were analyzed: (a) the logical structuring of scientific communication published in the IRs; (b) the metadata which describe scientific communication based on the terms of the DCMI protocol used; (c) the availability of software functions which facilitate the queries and publication of evidences. Results show that the introduction of IRs did not add value to the quality of research in\ terms of associating and publishing evidence that could back them up. A strong tendency to replicate the traditional library model of physical collections was observed. It was concluded that merely possessing good technological tools is not sufficient for fostering innovation and strategic gains in organizations, even if their implementation takes place in highly promising and favorable environments.

Mutagenic activity of sweepings and pigments from a household-wax factory assayed with Salmonella typhimurium

The mutagenic activity of garbage originating from a household wax industry was determined by the Salmonella/microsome assay, using the bacterial strains TA100, TA98 and YG1024. The garbage was obtained by sweeping the floor of the factory at the end of the work shift. Organic compounds were extracted by ultrasound for 30 min in dichloromethane or 70% ethanol. After evaporation of solvent, these extracts (HFS: household-wax factory sweepings) were dissolved in DMSO, and were tested for the mutagenic activity at varying concentrations (HFS-ET: 0.08-0.68 mg/plate, HFS-DCM: 0.60-7.31 mg/plate). The colouring agents (pigments) used in the production of the wax were also dissolved in DMSO and tested with the assay. The concentrations tested for each pigment were: Amaranth: 0.46-3.65 mg/plate, Auramine: 0.15-1.2 mg/plate, Tartrazine: 0.46-3.65 mg/plate and Rhodamine B: 0.22-1.82 mg/plate. Both ET and DCM organic extracts had mutagenic activity, especially in the YG1024 strain. The pigments behaved in a similar way, demonstrating that YG1024 was the most sensitive strain for the detection of mutagenicity, and that metabolization increased the activity. Human exposure (occupational and non-occupational) to industrial residues generated during the household-wax manufacturing and packaging process should be monitored, since this type of garbage is normally deposited in the environment without any control. (C) 2004 Elsevier Ltd. All rights reserved.

Thermodynamic analysis of the cogeneration system expansion in a sugar-alcohol factory

In this work it was performed energetic and exergetic analyses of three thermal plants to assessment a cogeneration system in expansion of a sugar-alcohol factory. The initial configuration considered is constituted by a low pressure steam generator, single stage steam turbines for electricity generation and crusher, shredder and mills with mechanical driving. In the intermediary configuration, the low pressure steam generator was substituted by another which generates steam at higher pressure and higher temperature, the steam turbines for electricity generation were substituted by a multiple stages extraction-condensation turbine and the other steam turbines were maintained. The final configuration consists in the substitution of these last turbines by electrical motors. Thermodynamic analyses were performed to evaluate the equipment and the overall plants efficiencies to permit a comparison among the plants. Besides of this, some important parameters of the sugar-alcohol factories were calculated.

Automation and cybernetics: Control of a flexible one-link manipulator

States that control is of the essence in cybernetics. Summarizes the dynamic equations for a flexible one-link manipulator moving in the horizontal plane. Employs the finite element method, based on elementary beam theory, during the process of formulation. Develops and instruments a one-link flexible manipulator in order to control its vibration modes. Uses a simple second-order vibration model which permits vibrations on the rod to be estimated using the hub angle. The validation of the dynamic model and the structural analysis of the flexible manipulator is reached using proper infrared cameras and active light sources for determining actual positions of objects in space. Shows that the performance of the control is satisfactory, even under perturbation action.

Mutagenic activity in waste from an aluminum products factory in Salmonella/microsome assay

The mutagenic activity of waste material originating from an aluminum products factory was determined by the Salmonella/microsome assay, using the bacterial strains TA100, TA98 and YG1024. The material was obtained by sweeping the factory floor at the end of the work shift. Organic compounds were extracted by ultrasound for 30 min in dichloromethane or 70% ethanol. After evaporation of solvent, these extracts were dissolved in dimethylsulfoxide, and tested for the mutagenic activity at varying concentrations. All the extracts from the factory had mutagenic activity, especially in the YG1024 strain, suggesting the presence of aromatic amines, later confirmed by chemical analysis. The TA98 strain also showed mutagenic activity, though it did not exhibit the highest mutagenicity index observed with the YG1024 strain. In TA100, mutagenic activity was not observed. This study should serve as an alert to management and those who are occupationally exposed, and as a warning that this type of waste should not be discarded in the environment without any control. (C) 2004 Elsevier Ltd. All rights reserved.